Additional data capture using Mview log

Similar Questions

• How Golden Gate will use change data Capture (CDC) in SQLserver2008R2

  How Golden Gate will use change data Capture (CDC) in SQL server 2008 R2. How much space it will occupy for each table when it erases the data and what will be the retention period for the tables of the CDC.

  So, here's what happens next. Normally, when a tranlog backup occurs, SQL Server may decide to release the tranlog space after the backup of the log, for transactions that have been committed and saved.

  When you activate a form any replication, like with OGG and allowing TRANDATA, you need to eat this truncation periodically. So with your configuration, even if the log backup occurs over 15 minutes, data in the journal are not allowed to be released after the log backup until the log backup that occurs after the 4th consecutive time of work.

  It is fine if you are not concerned about the lack of free newspaper in 4 hours. Just something to keep in mind.

• Task Scheduler could not start. Additional data: error value: 2147943726. What does that mean?

  A scheduled task could not start leaving this message: Task Scheduler could not start '\Fence check Rota' task for the user "Alan Laptop\Alan". Additional data: error value: 2147943726.

  The task ran on the previous 2 nights without problem Action is: "C:\Program Files\Microsoft Office\Office12\Excel.exe" / r "C:\Users\Alan\Documents\HSC\Fence Check\Fence check Auto Run.xlsm" and there is nothing wrong with it all the files are where they are supposed to be.

  After "the event log online Help" takes me to a page that tells me to convert the code above in a decimal value and search for it on another page. This has error codes in the 0 to 15999 slices. The value I have to 214793726 is obviuosly not an Octal value because it contains the 9 digit and if a decimal value is greater than 15999 and if hexagonal then considerably higher.

  Can someone tell me what is a failure?

  My answer comes late, but I hope useful for those seeking a response.

  As some have said above, changing the password has a role at the origin of this error. \

  quickist fix (instead of changing long ms.config of microsoft) is:

  in Task Scheduler, click the scheduled task properties > then settings

  in the last option listed:

  "If the task is already running, the following rule shall:

  Select "stop the existing instance" in the drop-down list.

  Save and exist.

  This should fix it.

• How can I create a column with additional dates in number 3.6.1

  I'm a noob for Mac so be gentle with me. I have a spreadsheet and need to have additional dates in the first column of 01.01.16 at the end of the year.  I managed to create a custom date format and changed cells to be this format, but no date appears in the cells.  What did I miss? Thank you

  Here's a way to do it:

  

  First, make sure that your table has enough lines for all the dates you want.

  Then enter your first date is in, say, A2.  A3 (the cell below) enter the following formula: = A2 + 1

  Select the cell containing the formula, place the cursor on the lower edge, then drag the yellow point to the bottom of the column.

  You can also select the cell containing the formula, command + c to copy, select all the cells in the column and command-v to paste.

  You can, of course, always use the custom date format you like.

  SG

• ModifyReportEntry add additional data

  Hello to all Experts Teststand,

  I am developing system of automatic test of electronic components.

  I use TestStand 2014 and 2014 LabVIEW. I'm generating the report in XML format using horizontal.xsl to view the report.

  I am trying to add additional data (for example name these 'StepDescription' data) to my report in the body of the report. I found information on how to edit the xsl file to add a new column to the report table (using BeginTable) and set the type of the step to which the present new data (search for "ADD_COLUMN_DATA_" in the file xsl. It is done and works very well.

  Now, I have to add my data to the output XML file so that the xsl can display this data in the new column "StepDescription.

  I use the ModifyReportEntry callback to add my data to the report string. Here are my problems:

  1. I noticed that the ModifyReportEntry callback called any that I ran my sequence. I am generation my report in XML format. In the report option, the box 'Select a report generator to produce report body' was grey, so I can't select the checkbox 'Sequence '. Is this normal? If it is gray out, what should I use (sequence or DLL) to generate the body of the report for the XML output format?

  2. If you can help me solve the problem in 1., then there is another problem, that is, how to record "StepDescription" data to the result database? I ask this because if I use the "additional results" a step to write the data in the database, it will also appear on the report (as attributes of the property). How can I write the data from the database using 'Other results' without him printing again on the report (as data already appears in the column "StepDescription").

  Thanks for your help.

  Yours,

  chati

  As described here, ModifyReportEntry only works for HTML and ASCII reports.

  http://zone.NI.com/reference/en-XX/help/370052N-01/tsfundamentals/infotopics/sequential_model_callba...

  Pulido Technologies LLC

• Can I export the data (XML) using Acrobat Standard DC?

  I am currently using Adobe Acrobat XI which is allow me to export XML data from tools > forms > form additional Options > export data. I know this feature is also available in Acrobat Standard DC?

  Hi jack65464326,

  Yes, you can export the data (XML) using Acrobat Standard DC, refer to this KB document for help Acrobat help. Collection and management of the PDF to form data.

  Kind regards

  Nicos

• Links to the external dynamics of additional data

  Hello

  I have several dynamic external links on the various pages which all work fine. However in 2 additional data pages is that the hierarchy of the web seems to be added before the link on the link as if it were an internal link.

  That is, if the site is www.abc.co.uk/def/

  My sata is held in < % = (Recordset3.Fields.Item("WebLink3"). % of the value) > and I checked the data organized in the field of the database so that the display on the page both are very well physically. I now use as my test example www.google.co.uk

  Thus, he thinks the link is www.abc.co.uk/def/www.google.co.uk

  There is nowhere in the source code all www.abc.co.uk/def/ hard-coded

  This is the code of the link that I use:

  < a href = "< % = (Recordset3.Fields.Item("WebLink3")." (% De la valeur) > ' target = '_blank' > < % = (Recordset3.Fields.Item("WebLink3"). % of the value) > < / a >

  More I look at this the more I think it must be so simple, but I can't see it.

  Any help would like to thank very much appreciated.

  You must include the Protocol (http://) of your data link.

• Error in opening file data after using command DATAFILE RESIZE

  Hi friends,
  
  I am facing a strange problem here. We had a space problem yesterday ORA-01659: cannot allocate MINEXTENTS beyond 42 in tablespace and I increased the underlying data by using the resize command files. The data files are 1 G earlier and I have them increased to 2G using the command
  ALTER DATABASE DATAFILE 4 resize 2G;
  
  It went well and I saw the free space in my table space. But after that when I try to delete a table using a script that connects to the db as the owner of the schema (the right script selects all the dictionary tables and sinks using the "drop table constraints x cascade", he thorws the following error)
  
  ERROR on line 1:
  ORA-01116: error opening the database file 4
  ORA-01110: data file 4: ' / SAN/p0/oradb/CBA11/data/avient01CBA11.dbf'
  ORA-27092: file size exceeds the limit of file size of the process
  Additional information: 132104
  Additional information: 262145
  
  Via metalink, I found that there could be problems with ulimit setting of the operating system. My OS is SunOS 5.8 Generic_117350-28 sun4u sparc SUNW, Sun-Fire-480R and my 10.2.0.1.0 oracle version. I updated unlimited for hard and soft limit parameters ulimit for the size of the file.
  
  airsun10 [CBA11] oracle: ulimit - as
  Time (seconds) unlimited
  leader (Blocks) unlimited
  Data (KBytes) unlimited
  Stack (KBytes) 8192
  coredump (Blocks) unlimited
  nofiles (descriptors) 256
  Vmemory (KBytes) unlimited
  airsun10 [CBA11] oracle: ulimit - aH
  Time (seconds) unlimited
  leader (Blocks) unlimited
  Data (KBytes) unlimited
  Stack (KBytes) unlimited
  coredump (Blocks) unlimited
  nofiles (descriptors) 256
  Vmemory (KBytes) unlimited
  
  airsun10 [CBA11] oracle: ulimit - unlimited Ss
  airsun10 [CBA11] oracle: ulimit - as
  Time (seconds) unlimited
  leader (Blocks) unlimited
  Data (KBytes) unlimited
  Stack (KBytes) unlimited
  coredump (Blocks) unlimited
  nofiles (descriptors) 256
  Vmemory (KBytes) unlimited
  airsun10 [CBA11] oracle: ulimit - aH
  Time (seconds) unlimited
  leader (Blocks) unlimited
  Data (KBytes) unlimited
  Stack (KBytes) unlimited
  coredump (Blocks) unlimited
  nofiles (descriptors) 256
  Vmemory (KBytes) unlimited
  airsun10 oracle [CBA11]:
  
  These solutions are proposed according to the noted MOS ID 271331.1. However, the question is still persistent. I get no idea on what is happening. Any help is appreciated.
  
  Thank you
  SSN

  The only reason why I could think of is the fact that the listener is started with limited to something different to unlimited. The listener to spawn a process dedicated server with the limit, causing the error ORA. When you connect directly, you use the DOB Protocol, which does not use the listener.

  Best regards, Gerwin.

• Change the option Data Capture option $ v

  Hello
  
  When I run the following query:
  
  Select the parameter, the value of the option $ v
  
  I noticed that the change data capture is FALSE, it means that I can't use the change data capture.
  I want to let you know that we use an ORACLE 10 g 2 standard edition.
  
  Best regards

  That is right.
  Re: A FEW streams available in the Standard edition features?

• The amount of data is used when you watch a movie online, a Wi - Fi connection?

  I have a MacBook Air, and I use a Wi - Fi sometimes connection for watching movies. I want to know how much data is used when I watch a movie of 2 hours to 720 p. I couldn't find a clear answer anywhere. Appreciate the answers. Thank you.

  15 MB/minute if you look at the video in 720 p, 34 MB/minute in 1080 p.

  3 GB per hour in HD.

• an additional data when writing in binary

  Hello

  I modified the example "HAVE Multi-multifunction-Ctr Retrigg Pulse Train generation of sample clock" for taste and store data in the binary file.

  The enclosed code may work. But when I open the file, I found for each 1000 correct samples, there is a very small vualue, as'

  -2.12e - 311 "in front of them and obviously an error value. There should be only 1000 samples for each iteration. Whence these additional data?

  Moreover, the acquisition of data in the application is SMU-6358.

  Thank you!

  Your binary data write wrote nothing at the entrance to add Array or the size of the string, which means that it is true by default.  These extra bytes that you see are those that define the size of your table.

• How can I get the exact time and date on my FAX LOG

  I have a new HP Officejet 6500 has more on my Dell Inspiron Windows XP computer.  How can I get the exact time and date on my FAX log?

  Hi FrederickFrank7,

  Journal of faxes would just follow the time of your printer. Please set the time and date of your printer.

  I am an employee of HP.
  Please indicate the position that solved your problem as "acceptable Solution".

• Data recovery using Microsoft Money Standard bought in New Zealand

  I use Microsoft Money Standard bought in New Zealand.

  As a result of a malfunction of the hard drive, I installed a new and recovered all my data files.
  I reinstalled Microsoft Money, but Money files will not open.
  A message informs you that the file cannot be located or is read-only, I don't have the permission to open or it is write protected. None of this is true then I suspect it has something to do with Microsoft withdraws this product.
  I can see there are no version sunset for my version, so how I can I recover my data for use in Microsoft Money or importing to another product I need of course to buy at one time?

  Yay! Success.

  It's hotfix QFE, whatever they are, that became a problem when Microsoft has ceased to produce and support money.
  Users of the United States had a "Sunset Version" to allow them to continue to use the program, but international users have been left in the cold.
  Finally, Microsoft provided a download to help users with the UK or International English. Why they did not consider their international users from the very beginning, God alone knows that!
  For the Version of Money 2005 - published July 28, 2011
  http://www.Microsoft.com/download/en/details.aspx?ID=26915
  For users of the International English Version of Money 2005 - published July 29, 2011
  http://www.Microsoft.com/download/en/details.aspx?ID=26922
  I have downloaded and run the NASB and my Money file open immediately. Great!
  Now, I just need to look at what it takes to pass when I decide it is time to move from Microsoft Money.

• What backup error "no additional data on the average of the band (0 x 80070450)? and how to fix it?

  I'm trying to back up my computer, but I get an error message. no additional data on the tape. -What it means and how to fix it?

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc (Vista, full and professional company)

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• copy of a dvd/data disc using vista

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  I have a HP desktop computer and an operating system vista Home premium I tried unsuccessfully to copy a dvd/data disc using windows media player 11 and Windows media center... Nothing works. I thought I have to first transfer the files from the dvd to my hard drive and then burn a copy. Please give me instructions on how to do it.
  Thank you, whoever you are helping me with that.
  Freddie

  ==================================
  Here's an easy way to create a copy of your DVD.

  The following freeware can create an ISO Image
  your DVD and then burn it to a blank dvd.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.