Error in opening file data after using command DATAFILE RESIZE

Similar Questions

• config file error could not open the file line column 0 0 onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console

  original title: config file error could not open the file column line 0 0

  onfig file error cannot open file row 0 column 0 - whenever I try to open my hp game console... I get this error message...

  Hello

  Was the HP works well before game console? If Yes, then do you remember any hardware/software changes, after which the problem started?

  Method 1: I would say you put the computer to boot and then check if the problem is caused by any third-party application.

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: I would say as you uninstall and reinstall the HP game console and check to see if it helps:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  You can also try posting your question in the HP Support forums.

  HP Support Forums - operating systems and software

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and/BD-p/OSandSW

• ERROR: Cannot open the data source for the user

  Hello, I followed the instructions in the URL below
  
  http://gavinsoorma.com/2010/02/GoldenGate-installation-Oracle-11g-on-Red-Hat-Linux/
  
  and I get the ERROR: cannot open the data source for the user
  
  I run the sql for the role but nothing
  
  any ideas please.
  
  Sun solaris operating system
  database version 9.2.0.7

  Previous question that you were:
  Where did you get the GoldenGate for Oracle 9i software?

• Error message: the files required to use Microsoft Update are longer registered or installed on your computer.

  As I never had problems with Microsoft Updates in the 3 years that I've owned this computer, I am confused now what has happenned.

  My laptop has a valid copy of Windows XP Professional and has always already been updated successfully, both manually by using the web page for the custom updates and so automatically.

  Can someone please shed some light on the question and how to fix it?  I obviously don't want to need to format this computer.

  I still regularly ran my anti-virus (N360 which is always updated) software and windows defender.  I have also always used Spybot S & D.  None of the mentioned software found no major problems, as I expect, because they are supposed to prevent intrusions. I also run the current Microsoft malicious software removal tool as an extra precaution.

  My problem is:

  After you perform a system restore to an earlier date on my laptop, I wanted to check windows update to make sure that all my security updates are in and up to date.  I opened the page to update as normal, then I accept the license agreement and I continued to the next screen.  Normally, I don't have to do this, he usually directly goes to the page.

  Then, I got this error message:

  The files required to use Microsoft Update are longer registered or installed on your computer.
  
  It is possible for me to choose
   "register or reinstall the files now (recommended)".
  However when I try this option I'm headed to the next web page where I get another error message:

  403-Forbidden: access is denied. You don't have permission to view this directory or page using the credentials you supplied.

  Could be a problem of hijackware but first see this archived thread WinXP general newsgroup: http://groups.google.com/group/microsoft.public.windowsxp.general/browse_frm/thread/4789b22822070e68/ee1886e36b8d6608?#ee1886e36b8d6608

  QED: Have you installed an update to wireless card that had been offered by Windows Update, the other day? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can't empty trash - error that the file is in use

  I noticed a recent bug that seems to be the case with PDFs, I opened in preview. When I close the file (cmd + w), but not to leave the program overview and then remove the file, when I go to empty the trash, I get an error message that the operation cannot be completed because the file is always used. I am only able to empty the trash immediately after a restart. I wonder if there is a way to fix this error!

  Thank you!

  Hulahooop,

  Right-click on the file in the trash, then select 'delete immediately... '. »

  

• Error "cannot open file."

  I have problems with Pages 5.6.1 on my MBP. Everytime I try and open a project, or save a new one, I get a "cannot open file" error. "

  The files all work very well using iCloud web access and on another Mac and iPad but not on this one machine. Oddly, when I close the Pages and try to copy a file from disk to iCloud Pages on my Mac, I get the error message that says that the file is "updated".
  I've not yet deactivated and reactivated Pages in the player iCloud in system preferences settings - I wonder if someone could suggest an alternative.

  Right-click on the file itself before you open it.

  Click info

  Check around to see you have rights on the document or check if it is locked

• Error when opening files on the file server

  I can't open the files in our file server CS5.  CS3 and CS4 can open files very well, but I get a message: "cannot open the document...". You may not have permission or the document can be opened already. »

  If I try to open a file on the file server in CS5, I get the message.  When I open the same exact file, copied to a local drive, it opens fine.

  I am on Windows 7, ID 7.0.2 server is Server SnowLeopard MacOsX with system to this day.

  Any help would be appreciated...

  How the path is specified, maybe too much so. What is the location of the server mapped as a drive?

• Error downloading the file of cod using java loader

  While trying to download the cod to the device file using javaloader, what follows is the result of the command prompt:

  Charger Pocket RIM Wireless Java
  Copyright 2001 - 2008 Research In Motion Limited
  Connection to the device... debug: error HRESULT during Open: 80040154
  Error: could not open port
  Press a key to continue...

  The batch file reads:

  OFF @ECHO
  : RUN
  @ "C:\Program Research In Motion\BlackBerry JDE 4.7.0\bin\javaloader" usb - charge appName.cod

  BREAK
  OUTPUT

  Pointers to solve this problem?

  Thanks in advance.

  It's an XP operating system.

  The device has been appearing as BlackBerry 9530 in workstation.

  The problem solved after reinstalling device drivers using the CD that came with the device.

• error when opening application data\microsoft\help\qyevopl.dll.

  Original title: I get a window rundll on opening how do SFC?

  Be very specific when telling me how to do this.  the box says application data\microsoft\help\qyevopl.dll

  You also have to be precise!

  If you receive an error rundll in opening, exactly what what would you say (be specific, not paraphrase).

  It is extremely unlikely that SFC will help you, but you can if you want to get frustrated time and waste.  If you have a genuine XP installation CD bootable which has the same Service Pack as your installed version (most people don't) SFC will complain - a lot and you will be in for a frustrating waste of time.  Suggestin SFC is akin to saying "I don't know what the problem is or how to fix it.

  There is no XP file called qyevopl.dll, so if that's what you're seeing, it sounds like your system is currently or has been affected by malicious software.

  You should tell us about your system and then run some known for malware scanners.

  It makes no sense to try to repair a system that is afflicted with malicious software, so if you still have the problem after scans run clean, then we can solve your problem.

  Since the implementation of the Microsoft Answers forum does not ask for any kind of information system when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Do you have the Windows Desktop Search installed issue?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Download, install, update and do a quick scan with these free malware detection programs (not at the same time):

  Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  SAS will probably report a lot of tracking cookies and you can just let him delete them.

  They can be uninstalled later if you wish.

  The scans by operating clean, restart, and then fix any problems.

• Cannot open files locked by using fingerprints on Tecra A11 - 17 H

  Hello

  I have a Toshiba Tecra A11 - 17 H - PTSE0E-03402EFR
  OS is Windows 7 64 bit

  Here's my problem:
  I blocked files (image, text) with fingerprints, while I was running Windows XP Professional.

  I copied my files without unlocked on external hard drive, and then uninstalled XP and installed Windows 7.
  After the relocation, the fingerprint reader has stopped working.
  I had to download the drivers and software on the Toshiba site.

  I then put my transferred on the external hard drive on the computer, but now it is impossible to open the file.
  Extension has been changed (automatically), an fpl. came to added after the original extension.

  I tried fpl removed, but nothing happens.
  When I right-click, I do not have the option 'unblock, but rather "to protect the file".

  I understand (reading the forum) that fingerprinting technology TPM consists of a microchip containing a unique computer decryption key.
  Theoretically, it would be possible to unlock my files, since it is the same computer...

  Help me please...

  Please read this:
  [Cannot access protected fingerprint after recovery files | http://aps2.toshiba-tro.de/kb0/TSB9802O50000R01.htm]

  _Issue: _
  A user can access its files of fingerprints protected when you save these files on external storage as for example a network drive and perform a recovery or reinstallation of the operating system on the computer where the files are protected.

  Individual: _
  AuthenTec fingerprint software provides a feature called 'the file/folder protection' which gives the user the ability to protect files without worrying if stored locally, on an external (USB flash memory) or network storage with either a password or stored fingerprints. After you protect the files, they cannot be moved/copied/deleted until the user Déprotège them.

  The first cause of the above mentioned scenario is due to the fact that the fingerprint software "Authentec" creates a link between material installed fingerprint and file system on the HARD disk that functions as a key. This connection is deleted after a formatting or removal of the hard drive of the computer. Without this connection, the files are no longer accessible and the user will not be able to unprotect them since there is no "key", that could unlock the file protection.

  _Resolution: _
  To avoid any loss of data caused by this scenario, * you need to unprotect the files before storing the files on external media * for purposes of backup/storage and then reinstall the operating system.
  Generally, users should make sure to keep a backup accessible to external storage of data corruption and data loss.

• How to open files (.dat) famos on tiara?

  In my request here I m using a data logger Kvaser Memorator professional for logging tool can signals using the Kvaser Memorator Professional Setup Tool software. By extracting the files saved in the eqquipent map, I have the following options for extensions:

  -Some signals to CSV

  -Signals selected as Matlab for ATI Vision

  -Certain signals to the MDF format for vector CANAnalyzer

  -Vector ASCII (.asc)

  -PEUT images in CSV format

  -PEUT pictures to plain text

  -Famos (.dat)

  -Vector MDF (.log)

  -Vector J1587 ASCII (.asc)

  -Kvaser binary format (KME 2.4) - used for vector cananalyzer

  -Kvaser binary format (KME 2.5)

  -Kvaser binary format (KME 4.0)

  What I want to do is open the file in one of these extensions above using the 2011 tiara. Who is the extension recommended for my application? Is there a plugin that I need to install on my computer? If son, which plugin and where to install it?

  Thank you very much!

  Hello

  Our suggestion is to use the MDF (*.mdf, *.dat) file format. You will need to install the following use: Use MDF.

  You will find a brief description on how to install this use here.

  Please let me know if this does not work for you.

• Memory insufficient error when opening file of 1 GB of PDM, no possible split

  Hi all

  the file in question contains about 1.4 million channels, each has entire 295 points. The channel name is the timestamp when its action has been taken.

  Tiara impossible to completely load and displays only the first 65,000 channels.

  LabVIEW (PDM read) may not even read smaller blocks of data. I tried to separate the file using Split TDMS file independent memory LV2009.vi (https://decibel.ni.com/content/docs/DOC-20054) , but nothing is done - the error I get is Code 2 (memory is full).

  I use Win7 and Labview 2012 32-bit SP1.

  Thanks in advance for any help.

  Best regards, Markus

  markhors wrote:

  [...] Do you know if LabVIEW can handle extremely large channels (> 1 GB) data?

  Regards, Markus

  64 bit LV, Yes. But according to the RAM installed, it would have the impression that the process is blocked.

  Looks like you create the configuration of the TDMS exactly the other way around such as recommended.

  Looks like you got some 295 transducers and read a value of each cycle of each. These values must be written in 295 channels consecutively, including an additional channel, you use the timestamp.

  Norbert

• help with a simple batch file to open files or folders in command prompt

  Read the article HERE. It should guide you to accomplish what it is you want.

  @ Daavee... I am a supporter of the Holiday Inn Express. I feel always smarter after a stay... hahaha

  OP.

  Use the following syntax to open a folder

  Start "" "File path".

  Example: start "" "C: \Documents and Settings\ username to open \My Documents\File name.

  The article HERE can be useful too.

  "No, I do not use the batch files. Just thought I'd share with you what I know. :-)"  Thanks again Daavee

• Previous versions CC and files remain after using the cleaning tool - anyone else?

  Windows 7 64 gb ram, dual Q4000 cards: update from 2014-2015 release - waited until I had finished projects on 2014.

  After the use of control panel to remove all the programs Adobe (including the removal of the predefined/prefs/plug-ins settings that I had saved), records containing all of the files and programs that dates back to CS6 remained on my drive C. I used Adobe as directed cleaning tool (option 3 - CC). However the old files containing programs, etc. STILL stay...? I then used the Adobe chat to ask about it. I was told then to use Explorer to manually delete the old files. WHAT IS PROPER PROCEDURE? I left a little confused the two uninstall through Control Panel AND cleaning tool really seem to remove older versions. ADOBE STAFF: PLEASE CONFIRM THAT I SHOULD USE EXPLORER TO MANUALLY DELETE THE FOLDERS OF OLD (CS6, CC, CC2014) OF MY C: DRIVE. Thank you.

  Please see:

  FAQ: How to uninstall creative cloud?

  In general, you want to uninstall first, then clean up.

• Error of the IDE controller after using vCenter Converter Standalone

  I usually get the following two messages when you click on the "Edit Settings... "the virtual machine created by using the operation"convert the Machine ":

  "An IDE controller is found but the virtual machine does not support this option."

  After clicking on the 'OK' button, I get this:

  "A flat backup option is not found."

  After clicking OK, the open Virtual Machine properties and hard disk 1 is summarized as 'not supported '.

  This occurred during the conversion of a source type of powered on the machine to a virtual machine of VMware Infrastructure, but also a source of VMware Infrustructure to another virtual machine of VMware Infrustructure.

  It can be the cause and the VM may be edited to prevent this. Happen using a Windows 2003 server that is powered on the source machine and a XP Pro Sp3 virtual machine running on ESX. XP has been installed directly as a virtual machine using an ISO file. The converted XP machine powers up to a GUI. I tried other machines, but the conversion operation fails at the beginning, probably because it was "multiboot" machines.

  Thank you

  Homerun.

  A virtual machine with the version 4 hardware does not support IDE hard drives. Try to upgrade the hardware VM to version 7