Additional installers list empty

Similar Questions

• Upgrade to LabVIEW caused 2012 issue additional installers

  Hello again all you lovers forum useful!

  I've been using LabVIEW 2010 (SP1) for awhile on my Windows XP computer, but I recently bought and installed LabVIEW 2012 for a future project.  In the meantime, my previous projects should always use LabVIEW 2010 until I use the tracking system of formal changes to my company to upgrade.  However, when I opened recently one of my old projects in 2010 to update and rebuild the installer, I saw in the tab other installers a bunch of empty lines at the end of the list (see screenshot).  This is not directly the hurt, but I think it's a symptom of the root problem.

  Most directly concerned, the NI VISA Run-Time 5.0.3 which had been checked before was now gone and the NI-VISA Run-Time 5.2 driver which had replaced it has NOT been verified.  That seems like an upgrade oops on part of National Instruments for me.  I decided that it was just a thing, and that the installer of 2012 had replaced my 5.0.3 version with version 5.2 (removal of the old version), so I checked the version 5.2 to build my Installer, and after having demanded that my DVD to copy the software on my computer, which seemed to work ok.

  Now the immediate problem: when I distributed the project file to a colleague that has LabVIEW 2010, she was not able to build my software installation, because he asked her to drive "FADEC_Emulator".  "FADEC_Emulator" is the name of my software.  Expansion of the error dialog box showed that he wanted the drive for access to NI VISA Run-Time 5.0.3.  Open the properties of the installer in the project file in LabVIEW showed NEITHER VISA Run-Time checked 5.0.3.  However, the project of opening with Wordpad file showed that NEITHER VISA Run-Time 5.2 has been listed as an extra Installer (and NOT 5.0.3  Maybe its system because I wanted NEITHER VISA Run-Time 5.2 and replaced it automatically with the latest version, he had, 5.0.3?  Confusing!  And if he did it, why he had that version already practicing?  And versions of switching as it seems it would be a bad idea to do it silently, in case I was counting on a specific feature of the new version.

  I'm afraid that since installing LabVIEW 2012 my system got in an unstable state, and now I possibly corrupted my LV project project file.  I need to have in 2010 and 2012 on my computer at the moment.

  Does anyone have an idea of what's going on with my system, or how to fix it?

  Thank you very much in advance for your suggestions and time!

  -Joe

  Hey Joe,

  I tried to reproduce your problems and met with mixed results. Please check with what I have provided below that we test in the same conditions

  jmorris wrote:

  Most directly concerned, the NI VISA Run-Time 5.0.3 which had been checked before was now gone and the NI-VISA Run-Time 5.2 driver which had replaced it has NOT been verified.  That seems like an upgrade oops on part of National Instruments for me.  I decided that it was just a thing, and that the installer of 2012 had replaced my 5.0.3 version with version 5.2 (removal of the old version), so I checked the version 5.2 to build my Installer, and after having demanded that my DVD to copy the software on my computer, which seemed to work ok.

  In this scenario, I built a test project with VISA RT 5.0.3 and LabVIEW 2010 configuration. I then installed LabVIEW 2012 and VISA 5.2.0 on top of the above configuration. When I opened the project from 2010 to 2012, VISA Run-Time 5.2 has been verified (as expected, dissimilar to your configuration). As I mentioned earlier, this may have been because VISA 5.2.0 did not install correctly.

  jmorris wrote:

  Now the immediate problem: when I distributed the project file to a colleague that has LabVIEW 2010, she was not able to build my software installation, because he asked her to drive "FADEC_Emulator".  "FADEC_Emulator" is the name of my software.  Expansion of the error dialog box showed that he wanted the drive for access to NI VISA Run-Time 5.0.3.  Open the properties of the installer in the project file in LabVIEW showed NEITHER VISA Run-Time checked 5.0.3.  However, the project of opening with Wordpad file showed that NEITHER VISA Run-Time 5.2 has been listed as an extra Installer (and NOT 5.0.3  Maybe its system because I wanted NEITHER VISA Run-Time 5.2 and replaced it automatically with the latest version, he had, 5.0.3?  Confusing!  And if he did it, why he had that version already practicing?  And versions of switching as it seems it would be a bad idea to do it silently, in case I was counting on a specific feature of the new version.

  In this case, I built the installation program on LabVIEW 2012 with VISA RT 5.2.0 then saved for LabVIEW 2010 compatibility. When I open the installer in a LabVIEW with VISA 5.0.3 2010 environment, VISA 5.0.3 has been verified (as planned since LabVIEW by default to the latest version of VISA on the PC, no matter what the original installer referenced). I did, however, see three additional empty lines in the additional installers (see below) tab. I also tried to build the Setup program that you have indicated, but did not get all the guests for the discs and was able to successfully build.

  One thing to keep in mind is that default LabVIEW uses the version of the driver that is installed on the PC version, whether it is newer or older than the installer references. If you feel that this has a negative impact on your success as a developer, please do not hesitate to post a feature request (for example, a guest at changes of the version of the driver) in our forum for the exchange of idea (http://forums.ni.com/t5/LabVIEW-Idea-Exchange/idb-p/labviewideas ).

  Finally, regarding empty lines in the additional installation specifications, this problem seems to be fixed in LabVIEW 2012 and manifests itself only in 2010. During my trial class, this does not affect installers of construction and is a minor inconvenience that has been fixed in later versions.

  Please let me know if you have other questions/comments on these issues.

  Concerning

  Doug W

• Blank Page for people with disabilities and additional installers

  Hello friends,

  First of all, I would like to thank NOR & veterans on the maintenance of this vast and useful forum where we can find solutions to almost all of our problems.

  I recently faced a problem when creating Setup program for my application (first time use). I found that page additional installers required to add the runtime and Daqmx drivers was empty and even the disabled (see the image attached). I tried to repair my Installation of Labview 8.2.1 (I also have Labview 8.0 installed on the system) but cannot correct the problem.

  Can someone offer please soultions or advice for my problem?

  Thank you

  Magalie

  
  

• Additional installers

  
  

  Similar to hardware DAQ requiring additional installers DAQmx, the DMM should also have NOT-included DMM.  Once again, this will include all the necessary drivers for that Windows detects hardware and for MAX see Configure, use of test panels and use it in your EXE built.

  Same thing with any switch devices.  I have not much used, but I think that what you want is to include OR-Switch software as additional setup.  Did you use Switch Executive?  You need to include that and I think that has a deployment license.  Not sure about any config Switch Executive export and import on desktop deployment.

  I need not write any Ko, I'm just here to help and get help too.  Thanks for the congratulations.

• Additional installers do I need to use the web server?

  I am building an application in LabVIEW 8.6 and want it includes the Web of LabVIEW server and eventually Web Services.  Should additional installers I include?  In addition to the runtime, the following options are: 'LV Web Services', "NI LabVIEW Run-Time Engine Web Server", "NI LabVIEW Web Server."  I can find no documentation explaining the differences between these - especially the last two.

  Hello Nathan,.

  From 8.6 web server is a separate component. Just as LabVIEW desktop is a separate installation program since the runtime if there is a web server for each component. In addition, Web Services is a component that is generated on the web server.

  So, if you need web server in the Office two, LabVIEW and RTE and you eventually will need to deploy web services, as well, then you'll need to install these components.

  Here's our FAQ to get Web services work - you might be useful.

  FAQ Web services

• Difference between DAQMX and DAQMX base. Task list empty

  Hello

  Can someone please explain the difference between NOR-DAQMX and NIDAQMX base?

  I have recently installed Labview10.0 and NOR-DAQMX base on linux opensuse 11.4 3.4.0. Everythinng works very well. The device is recognized by labview and I put my controller and chassis using nipxiconfig. The DAQ assistant function is missing and also the drop down task and channels is empty, even if I create a new task using the basic NIDAQMX configuration utility.

  Can you get it someone please let me know where I'm going wrong?

  Thank you

  The DAQ Assistant is a Windows program only, DAQmx only.  It not Linux or with DAQmx Base.  DAQmx basic tasks and channels are a little different (I think) counterparts DAQmx.  The fall to the bottom of the list of basic parts, or is it only DAQmx?

  Lynn

• My memory works ok? (Additional JEDEC listed)

  Additional JEDEC #6?

  I bought this 2 GB of http://tinyurl.com/2urvxgl key to upgrade my laptop to 4 GB. Because I mix I wanted to make sure that all manufacturers (Micron & Samsung) is very well by running CPUz diagnostics and noticed that Micron module has an additional entry in the JEDEC timing Table (it lists JEDEC #6 10.0 - 10-10-28-38 761 MHz) I also noticed the Micron stick seems to have a different number of chips on the stick of RAM too compared to the Samsung RAM.
   
  -Is this normal? -Do you think I'm getting double channel of this mix of manufacturers?
  I guess the worst case scenario is to order another Micron 2 GB stick so that I have identical, but all pairs seems OK so far.
  Model of laptop: HP G62-a15SA

  Please see below for info extracted by CPUz memory:
  Chipset
  -------------------------------------------------------------------------
  Northbridge AMD 785GX Rev. 00
  AMD Rev SB800 southbridge. 40
  Type of DDR3 memory
  Memory size 4096 MB
  Double channels, (Unganged)
  Frequency 532,5 MHz (3:8) memory
  Latency CASE # (CL) 7.0
  RAS # for CASE # delay (tRCD) 7
  RAS # Precharge (tRP) 7
  Cycle Time (tRAS) 20
  Cycle time of Bank (tRC) 27
  Control rate (CR) 1 t
  Uncore frequency 1597,4 MHz
  Memory SPD
  -------------------------------------------------------------------------
  DIMM # 1
  SMBus address 0 x 50
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Micron (2 00000000000000) Technology
  Size 2048 MB
  Bandwidth Max PC3-10700 (667 MHz)
  Part number 8JSF25664HZ-1G4D1
  Serial number 3116004D
  Date 29/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 5.0 - 5-5-14-19 @ 380 MHz
  JEDEC #2 6.0 - 6-6-17-23 @ 457 MHz
  JEDEC #3 7, 0-7-7-20-27 @ 533 MHz
  JEDEC #4 8, 0-8-8-22-30 MHz 609
  JEDEC #5 9.0 - 9-9-25-34 @ 685 MHz
  JEDEC #6 10.0 - 10-10-28-38 761 MHz

  DIMM # 2
  SMBus address 0 x 51
  Type of DDR3 memory
  Format of SO-DIMM
  Manufacturer (ID) Samsung (CE00000000000000)
  Size 2048 MB
  Bandwidth Max PC3-10700 (667 MHz)
  M471B5673FH0-CH9 part number
  Serial number 78FDDF59
  Date 14/year, 10 weeks of manufacturing
  Number of banks 8
  Nominal voltage 1.50 Volts
  EPP no
  XMP no
  Timings JEDEC CL-tRCD-tRP-tRAS-tRC table @ frequency
  JEDEC #1 5.0 - 5-5-14-19 @ 380 MHz
  JEDEC #2 6.0 - 6-6-17-23 @ 457 MHz
  JEDEC #3 7, 0-7-7-20-27 @ 533 MHz
  JEDEC #4 8, 0-8-8-22-30 MHz 609
  JEDEC #5 9.0 - 9-9-25-34 @ 685 MHz

  Studio_Muppet wrote:

  

  Hi erico!

  I thank you for your reply, noted that the SPD does not give abilities - having a JEDEC extra listed on my new stick of RAM and not the other question? It does not matter. Those are the timings primary, secondary and tension that a BIOS can use to automatically set the memory at FSB speeds.

  Also, I noticed a change in the frequency of frequency & DRAM NB when comparing the original configuration of 3 GB for my new 4 GB configuration: old Vs new Config

  

  Is this normal?

  The speed of the memory takes by default the slowest speed. Consider yourself lucky that it starts in Windows. Most do not have that kind of luck and is frustrated to have the new memory that does not work in their notebooks.

  Sorry for my lack of knowledge, I want to be sure I'm not compromising performance by mixing RAM from different manufacturers. If additional memory is slower than the original memory then you have slowed the operations of memory and essentially lost some performance. I see it running in dual channel. It's a surprise. Lucky you!

  Best regards

  ERICO

• "All programs" list empty

  Yesterday, I noticed that when I click on "All programs" in the Start Menu, there are all the programs listed. I can still access all of C:\Program Files, so I know that I've accidentally deleted all the programs. Is it possible to restore them to "all programs"? Attached is a link to my "All programs" list look like now.

  Hi LisaEB,

  1. you remember to make changes to the computer before this problem?

  It seems that if you have something close to 70 or more shortcuts/folders in the all users folders & Start Menu/user combined program, the list of all programs will eventually be empty or empty. Check the number of recent programs that can be displayed in the Start Menu.

  Method 1:

  a. click Windows orb to open the Start Menu.

  b. right-click on all programs, and then select open.

  c. double-click the folder programs. There should be a list of folders.

  d. create a new folder.

  e. Select a bunch of files in the folder programs and drag the folders to the new folder.

  f. restart your computer and check if the programs are shown when you click on start > all programs.

  g repeat the above steps until the list is displayed in all programs.

  Method 2:

  You can also try the following steps and check if it helps...

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Back up the registry

  a. Click Start and type regedit.exe.

  b. Select regedit in the search list.

  c. now, navigate to the following keys:-
  HKEY CURRENT USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders

  d. the value of Start Menu to "%USERPROFILE%\Start Menu".

  e. go to HKEY LOCAL MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders.

  f. common value Start Menu to "%ALLUSERSPROFILE%\Start Menu.

  g. close the registry editor and restart the machine.

  Hope this information is useful.

• BlackBerry Smartphones BBB LIST EMPTINESS contacts

  I'm happy with my BBB! But, after the seizure of many contacts and after the first synchronization, the list of contacts appears always empty! I am able to access only through short cut contacts, by typing the letters on the keyboard, but not through the contact icon. It shows always empty. Please, someone has an idea? Thanks in advance, Erondasilva.

  It has been filtering my personal contacts! Thanks for your help...

• Mobile version Hyperion Planning - list empty reports

  Hi, Experts!

  I have test the mobile version of Hyperion Planning (11.1.2.3.500). I ' v has everything, but not reports,

  I tried different ways: accorder grant permissions in Expolrer, copy reports to users, log in as administrator.

  but the list of reports is always empty!

  There is no "no Reports" tab as 'Tablet access'... He has only lists of tasks, forms and approvals.

  Any body explain what can I do to get access in mobile planning reports?

  

  John,

  I raised a SR with Oracle long back and they mentioned that the reports should be instantaneous.

  Comments here

  launch of dynamic reports in FUSE/Tablet UI is not supported in 11.1.2.3.500. Only a snapshot of report/book can be launched from the FUSE mode.

  http://docs.Oracle.com/CD/E40248_01/EPM.1112/planning_admin_11123500.PDF

  Excerpt:

  Considerations when using the easy UI for Tablet

  -A PDF reader is required to view reports on the tablet. Oracle

  recommend

  Adobe's PDF Viewer, but it can be opened in Kindle or Polaris Office on

  Android devices or a similar app on the iPad.

  -Reports are snapshots of the data. Alternatively, you can make snapshots of the work which

  contain several reports and report snapshots. To display a new data set,

  you

  create a new snapshot of the reports. Snapshots are static and show

  all the

  pages of the report. Reports can be modified to display the Page/POV or row and

  column size limitations.

  .

  Thank you

  Anjum

• Problem of 5.0 to 5.1 upgrade VCSA - host list empty

  Hello

  I'm upgrading from 5.0 to 5.1 VCSA.

  I folled it http://KB.VMware.com/kb/2033990 Instructions KB.

  Step 14, after the trust is made I should get a list with all hosts managed, but all I get is an empty list!

  

  How can I solve this problem and continue with the upgrade?

  I tried IE8, IE9, IE10, Chrome and Firefox.

  When I just click 'Next' I get an error "404 - Not Found" pre-upgrade check tool.

  Help, please!

  Kind regards

  Alexander

  Hey all,.

  After I cancelled the upgrade, renamed the new VCSA to something more useful and changed the static IP address.  I was able to proceed with the upgrade.

  See you soon,.

  Alex

• The attributes of the element list empty when adding attribute #FROM_ROLE to the message (Type CREATEPO element)

  I'm customizing item type CREATEPO adding a new notification with the corresponding message and I am facing a problem with the workflow designer (using the v2.6.3.5.0 Oracle workflow Builder).

  This notification must have a specific sender, which is already stored in a custom element attribute.

  According to the developer's Guide, I add a new message attribute with the internal name = "#FROM_ROLE" for the new custom message.

  I put all the remaining data, according to the instructions of the Manual: Type = role, source = send, full name and description = ' role', default = attribute Item type.

  But when I try to set the default value, the list is empty and I can't choose any attribute of the element.

  I tried to define a new message in other Types of items, such as REQAPPRV, and in this case, the list of attributes is displayed correctly.

  Any idea or solution?

  Thanks in advance,

  David

  I already solved the problem.

  So that the attributes of the element to appear as default values for the attribute Message #FROM_ROLE, they must also be of type role.

• What is the initial value of a drop-down list empty?

  I wrote a script to populate the items in a drop-down list but only if there is no existing entry.

  The problem I have is to acknowledge that the list is empty. I tried to test the value null (if dropdown.isNull = true) and test the

  rawValue = "" and a bunch of other things without good result.

  I don't know that it's easy, but apparently not for me.

  Thanks for the help!

  These commands to test the value selected by the user. As they have not chosen anything and yet they will not have a value.

  The command:

  DropDownList1.items.nodes.length

  This will give you the number of items in the DDlist. It is 1 based. Note that it will count all the elements that have been added to the drop-down list by the user.

  Paul

• NOR-DAQmx run options under additional installers are not displayed

  At halfway in this FAQ (http://zone.ni.com/devzone/cda/tut/p/id/3021) talks about the various Runtime options available when you include the NOR-DAQmx driver in a LabVIEW Installer - they are full and 5 different options of operation. I have 2011 LabVIEW and NOR-DAQmx 9.3.5; the only installation type I see is complete. No idea what I may have missed to install or configure correctly?

  Thank you

  Jorge

  Hi Jorge -.

  You make an excellent point raise this question.  The reality is that the documentation is a bit a type-o.  The latest version of DAQmx which allowed this ability multiple-install type was 8.7.1 that allowed full, TERM 3 and 5.  Version 8.6.1 allowed all full of Runtime and RT 2-5 selectable options.

  This was changed in the development of the installer because features such as Measurement & Automation explore (MAX) by omitting makes it much more difficult to program source files that use the DAQmx driver.  Limited choice DAQmx Installer problems in future development. SignalExpress is also omitted in some versions.   This change was made in order to avoid questions that were considered to be a problem when the installers have been created with these minimalist installs.  So I'll make this change to the Developer Zone confusion invites future readers.

  I really appreciate your message and bring it to our attention.

• MapView list empty (black) on OS 10.3

  Hi all

  I use MapView in an app and its works very well on OS 10.2, but after 10.3 updated his does not.

  Its black list without content above.

  There is also the debug output saying:

  rendering engine using the following: bb::cascades:maps:BlankRenderEngine

  I also have this included in the .pro file

  LIBS += - lQtLocationSubset - lbbcascadesmaps-lGLESv1_CM

  Help, please!

  Thank you

  Diagne

  Did you guys added a height and a width to your mapviews?

  try this.  My application revolves around maps and I have problems on 10.3 SDK.