Additional memory for Desktop dx2450

Similar Questions

• addition of CPU/memory for desktop computers in composer linked clone pool

  Hi all

  I want to add more CPU/memory for desktop computers in a pool of composer linked clone but I want to build a pool of test out changes first, while the production area is still in place. Can you screw with virtual material in the main image and then take a snapshot and build the pool of test out of it without him bring the clones in the production pool?

  I think that the process would be as follows...

  1. modify the parameters of material on the main image of Win7

  2. run the main image and let it recognize the CPU and additional memory (probably needs to restart the CPU I think)

  3. close the main image and take a snapshot

  4 create a new pool of test off the coast of this new snapshot

  Thank you!

  Yes it may seem straight, it won't cause any problems. If you want to be very careful with your prod environment, you can just clone the base image and make your tests on it.

• How can I order additional memory for my HP Mini 210-2001sd PC computer

  How can I order additional memory for my HP Mini 210-2001sd PC computer

  Here is a link to a seller.

• Reservation of memory for desktop view

  "Set the VMware View Master model with a 50% memory reserve for all deployed VDI computers have a reservation of 50% of memory"

  Source: http://joshodgers.com/2012/12/17/example-architectural-decision-memory-reservation-for-virtual-desktops/

  Anyone done this?  My model is currently set to 0 for the memory reserve.

  My current setup:
  Windows 7 x 64
  2 vCPU
  3 GB RAM

  Should I pay for the reservation of memory 1536 and I test?

  Yes I usually recommend this. You will not see a big difference in performance, but will save your storage space because it will only need to create two times less fat-file on disk.

  Linjo

• Upgrade memory for desktop Aspire TC 705

  Hello, I would like to upgrade my TC Aspire 705 4 GB to 8 GB... whose memory is compatible and which is best?

  It has two slots a blue and a green, blue is occupied by the Bank of memory that came with the pc and is a SK 4 GB PCL3 1Rx8 hynix low voltage - 12800U - 11-13-A1 I said, I tried a similar Bank, but he did not not recognized by pc (?) no beeps or the other (?) I tried the solo Bank upgrade, then I got beeps (?) someone advice pls?

  TIA

  Rudy

  The problem with the purchase of Hynix is that it is too expensive.  Almost double or triple the price because they have really not the retail arm for their "regular memory.  They started a retail arm for their passionate high range for boards thing this year... which does not help.

  All you really need is this module of Kingston.  It works perfectly with your memory of BIOS and Hynix Board, CPU, Intel/Acer H81... and should run two channels with existing memory... no problem.

  http://www.Newegg.com/product/product.aspx?item=9SIA4M53GY8162&cm_re=KAC-VR316S%2f4G-_-20-239-298-_-...

  Edit: If you can find the part of Hynix on Ebay at reasonable prices, then go ahead.  I have the above kingston module and it works perfectly (dual channel) with Hynix in tc - 605 (which has the same advice that tc-705).

  Edit2: Memory voltage (DDR3L) will work to 1.35 or 1.5V.  Your existing Hynix DDR3L will work perfectly @ 1.5V as this is a standard JEDEC for your motherboard.

  http://www.Kingston.com/us/memory/search/?partid=KAC-vr316s/4G

• Additional memory for Dell Precision M4600

  Hello people, I need your help once more, my laptop is a Dell Precision M4600, come without webcam, dvd - rom, 2 x 2 GB ram, without fingerprint reader, intel core i5 - 2540M, the memory of two banks in the lower side works fine, two banks of memory under the keyboard come covered, I removed the cover and try to use , but when put memory in this Bank, the laptop does not work, power on but not the video, the witness of hard drive and wifi is turned on and battery is flashing. I am doing wrong?

  Thank you in advance.
  Daniel.

  Hi Daniel,.

  Precision M4600 memory configuration is based on the processor. All 4 memory (DIMM) slots will work if the computer has Intel Core i7 Quad Core or i7 Quad Extreme processors.

  Only 2 slots DIMM will work in configurations with processors Intel Core i5 or i7 Dual Core. Because your computer has processor i5 - 2540M, only the primary DIMM slots (bottom) can be used.

  Please come back for any clarification.

• What is the voltage of the module memory for desktop Pavilion 6000 series? (Win7 64-bit;) Alvorix MBoard)

  No info on all help screens

  Prof. Banhein: I know layout of speed etc. Crucial site gives two choices for mem modules: 1.35 or 1.5 volts. This is the crux of the problem.

  Thanks for the quick response, running 6000 series pavilion (p6703w) w/Alvorix, motherboard, Win7 64 bit. More help please!

• Extension memory for 1620cds

  Hello, I want to install an additional memory for my 1620 satellite CD. Anyone know what model of memory I can install?
  Thanks and sorry, but my English is not very goog. I am Spanish.

  Hello

  I discovered that these RAM modules are compatible with your device:
  128 MB - PA3005U
  64 MB - PA3004U
  128 MB - PA3005U
  32 MB - PA3003U

  Good bye

• HP 6735 b - FM809UT #ABA: extra memory for HP 6735 b

  I would like to add additional memory for my HP6735b.  I am currentlly have 2 GB under the keyboard and do not want to try to remove the keyboard to read what is there.   What are the specifications for the purchase of another key memory 2 GB.

  Thank you.

  Hello

  Manual

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c02030223-1.PDF

  Module 2 GB - DDR2 800 MHz

  Number of leaves: KTH-ZD8000C6 / 2G

  Notice: DDR2, 800 MHz, Non - ECC CL6, 1.8 v, memory buffer, SODIMM 200 pin

  If 4 GB is installed, recognized memory can be reduced to 3.5 GB or less (depending on configuration and system memory allocation). Maximum configurations require a 64-bit operating system.

  http://www.kingston.com/latam/memory/search/Default.aspx?DeviceType=3&Mfr=HEW&Line=Business%20Notebook&Model=47872&Description=Kingston_System_Specific_Memory_for_HEW_Business_Notebook_HP/Compaq_-_Business_Notebook_6735b

• Pavilion 500-189: usefulness of adding additional memory to a computer desktop Pavilion 500-189

  Hi - I think adding memory RAM additional to my desktop HP Pavilion computer model 500-189, bought in February 2014. It runs under Windows 10 home ed., 64 bit with RAM total to 10 GB. The computer has 4 memory slots and currently only 2 are used: slot 1 has a card 2 GB Hynix/Hyundai 1600 MHz and slot 2 has a card 8 GB Kingston 1600 MHz.

  I'm currently pondering adding a single 4 GB DDR3 1600 MT/s PC3-12800 CL11 map of 240 pin unbuffered UDIMM in each of the last two slots to bring the memory total amount up to 18 GB. The total cost would be less than US $40.

  My question: This inexpensive upgrade will not improve the performance of my computer or is - this exaggeration only change?

  Comments or suggestions would be greatly appreciated.

  Graphene, welcome to the forum.

  Now, we are dealing here with reviews.  The sweet spot for memory seems to be 8 GB with Win 10.  In fact, I read that you will be hard to see a difference between 8 and 16 GB.  I use a laptop of Omen HP with 8 GB memory game.  It manages all the games that I played very well.  As you said, you already have 10 GB of memory and the processor is very fast.

  Yet once, is discussed in the opinion.  In my opinion, the best upgrade that can be done today is an SSD.  My HP Omen loads games and programs incredibly quick and starts in 7 seconds or less.  I used a Samsung EVO 840 500 GB SSD in HP Phoenix Gaming desktop computer.  Again, it was incredibly fast.  Here is the SSDthat are recommended by Crucial memory.  They make great products for OEM computers.  I found the research that Samsung SSD seem to work better with HP motherboards and normally don't require changes to the BIOS works properly out of the box.   In addition, Samsung has its own Migration of data and Software Wizard software to fine-tune the SSD after installation.

  This should give you pause.  If you decide to go with an SSD, I'd be happy to tell you how I did the installation.  It has worked well for me.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Additional fee for the Satellite C660-116 memory

  Hello

  I would like to add to my Satellite C660-116, which has a memory 800 Mhz 1 GB installed DDR3 2 GB of additional memory. (Samsung M471B2873FHS-CH9, 204 pins SODIMM)

  After consulting with several Internet sites it can a confusion now:

  Samsung 1 GB DDR3 10666 1333 MHz laptop memory
  Samsung 1 GB DDR3 10600 1333 MHz laptop memory

  While the official website of Toshiba says 800 Mhz.

  It was easire to find a DDR2 800 Mhz for a DDR3 at 800 Mhz, however, to get a DDR3 at 1333 MHz 2 GB is very simple and reasonable in cost.

  Someone could say 2 GB memory which would be the best to buy (a 204-pin SoDIMM DDR2 800 Mhz) or a DDR3 1333 Mhz or something else?
  Thank you

  Toshiba recommends the use of the module of RAM 2 GB compatible with PA3676U-1M2G part number.
  This memory has been tested and works perfectly.

  If you want to have high quality I recommend you use Kingston RAM compatible RAM for your Satellite is KTT1066D3 / 2G.

  Check the two modules and compare the price. Always is it that both of them are high quality products, and you will have no problems using one of them.

  By the way: your laptop can be upgraded up to 4 GB so I think you must be upgraded to the maximum level.

• My current osx is the version 10.5.8.  I read the posts on this site advises users to buy 10.6 and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible? Thanks for any help!

  I explore what I need to do to upgrade my imac. My current OS is x version 10.5.8.  I read the posts on this site advises users to buy 10.6 (Snow leopard) and then upgrade more far away. Since I was only 1 GB of memory, do I need additional memory installed first? Is this possible?  I have an Intel Core 2 Duo 2 GHz processor and 1 GB of memory. My Info says memory I have 1 Bank empty. Thanks for any help!

  You need to install more RAM before moving to Snow Leopard and need to do before moving to Lion or newer. Buy it from a source OWC or Crucial.

  (138456)

• Upgrade Vista 32 and 64 for the recognition of additional memory and game performance

  I have a question for the computer.  I have a HP Pavilion Elite m9040n who has Windows Vista 32 - bit SP2 with 3 GB of memory.  From what I've been able to determine, the 32-bit version doesn't recognize up to 3.5 GB of memory and I need to install the 64 bit version of Windows Vista for additional memory can be installed AND recognized.  This system comes with the Core 2 Quad Q6600 (K) 2.4 GHz, at 1 066 MHz front side BUS and Socket 775.

  My question - would be upgrade to Windows Vista 64-bit and install another 4 GB for a total of 7 GB of extra memory for increased game performance.  Also, I have a graphics program which because of some image sizes (up to 96 inches - 19200 pixel everywhere) program that the bombs on me with "out of memory" messages.  I play World of Warcraft and Starcraft 2 right now.

  Thank you.

  Just another Hacker ol '

  In your case a newer graphics card improve performance much more compared to buying new RAM. You can then add more RAM. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• You are looking for a new graphics card with 1 GB of memory for Satellite Pro A10

  I am looking for a new video card with 1 GB of memory, preference but is RIMM memory ram in my office, but has a different type of memory in the description of the video cards.

  Is it important at all, the video card would work always?
  Thanks 1million
  Stephen

  I put t know exactly what you want to do, but I assume that you need this card for an upgrade.
  New bad guy! Laptop graphics cards are often fixed on the motherboard and cannot be deleted!
  In addition, you must know that the mobile graphics cards are simply different and you can't compare these chips with adapters for desktop PCs.

  Best regards

• Upgrade memory for L30 - 10V

  I am currently awaiting delivery of the Satellite L30 - 10V and ordered a 512 MB additional memory. Please can someone give me a basic description of what I need to do to install it. You may have guessed that I am no expert.

  Thanks Dan

  Hello

  the following memory modules déparerait for your machine:

  256 MB DDR2 400/533
  512 MB DDR2-400/533
  1 GB DDR2-400/533

  You can upgrade your machine memory to a maximum of 2 GB (1 GB per slot). I hope this information helps you.

  Welcome them

  P.S.: Regarding the manufacturer, I you suggest using the original toshiba memory, as are 100% compatible. Otherwise, you can use the kingston modules that are compatible too.