Additional namespace was added after calling SOAPBody.addDocument (xmlDoc)

Similar Questions

• Problems with duplicate DATA when the data file was added after the backup completes

  Hello
  
  I am facing a problem when running of duplicate database with the command of database duplicate RMAN on a 10 g database. If I have the duplication from a full backup that is missing a data file that has been added to the database after the full backup of preforms, I get the following error message:
  

  Starting restore at 10-10-2009 18:00:38
  
  released channel: t1
  released channel: t2
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39
  RMAN-03015: error occurred in stored script Memory Script
  RMAN-06026: some targets not found - aborting restore
  RMAN-06100: no channel to restore a backup or copy of datafile 43

  Redo log which was Pond at the time of the creation of 43 of the data file is also available in the backups. It seems that RMAN cannot use the log information archived redo to restore the content of the data file 43. I guess that because failure is already reported in the RESTORATION and not in the RECOVERY phase, so again the archived logs are not available yet. I get the same message even if I do another backup of the data file 43 (so a backup that is not in the same backupset as the backup to all the other data files).
  The script, the command duplicate product, I guess that RMAN reads the contents of the source database controlfile and trying to get a backup that contains all the data files to restore the database Assistant - if such a backup is not found, it fails.
  
  
  Of course, if I try to perform a restore/recovery of the source database, it works without problem:
  

  RMAN> restore database;
  
  Starting restore at 13.10.09
  using target database control file instead of recovery catalog
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: sid=156 devtype=DISK
  
  creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF
  channel ORA_DISK_1: starting datafile backupset restore
  channel ORA_DISK_1: specifying datafile(s) to restore from backup set
  restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF
  .....

  The 43 data file is re-created and then redo is applied to the course.
  
  So, does anyone know if the duplicate database can use archived redo logs to recreate the contents of a data file, as does a normal restore/recovery? If this is the case, then it is necessary to perform a full backup before each duplicated if a data file has been added after such a backup database.
  
  Thanks in advance for any answers.
  
  Kind regards
  Swear

  Hi swear,.

  I got exactly the same problem during replication.
  Because we backup archive logs every 6 hours with rman, I added an additional block of running this script.
  run
  {
  backup incremental level 0
  format "% d_ % s_ %%t p_ bk_ '.
  filesperset 4
  database not saved;
  }

  (I also hit a bug in the catalogue which was resolved by patching up the dbs catalog 11.1.0.6, 11.1.0.7 for.)

  This will restrict the data not making file not part of any backup rman 6 hours while jumping for which there is already a backup of data files.

  Kind regards

  Tycho

• HELP PLEASE! The computer was restarted after a bugcheck.

  I was hoping that someone could help me understand what is the cause. This has happened for the past 2 days on one of our servers. The server is a Windows Server 2008 R2 computer.

  That's the message in the event viewer:

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000050 (0 x 0000000000000001, 0xfffff800016d40cc, 0xffffffffffffffd0, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 030313-9156-01.

  This is the message that is displayed on windows re-opening after the accident:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.272.7
  Locale ID: 1033

  More information about the problem:
  BCCode: 50
  BCP1: FFFFFFFFFFFFFFD0
  BCP2: 0000000000000001
  BCP3: FFFFF800016DE0CC
  BCP4: 0000000000000000
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 272_3

  Files helping to describe the problem:
  C:\Windows\Minidump\030413-8765-01.dmp
  C:\Temp\WER-83783546-0.SysData.XML

  Hello

  Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  For BlueScreen troubleshooting methods using BlueScreenView and MyEventViewer see my
  answers if this thread - top 3 RESPONSES (+ 1 other).

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  --------------------------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  References to Vista also apply to Windows 7.

  Have you recently added any hardware? Have you updated a driver just before
  These began? (Check control panel - updates of Windows to see if all drivers
  have been updated it there all the time, it started) main likely culprits are video
  pilot, other great drivers, memory and antivirus/antispyware/security products
  could be faulty as well as reader questions.

  Use the troubleshooter below and refer to the following message for pilots and
  memory when you get these sections and then return of the disease.
  game needed.

  BCCode: 50 0 x 00000050

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA

  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.

  Important info if you received a STOP Code

  If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you have purchased
  Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

  If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

  These actions could prevent a mistake like this does not happen:

  1. Download and install updates for your computer from Windows Update device drivers.
  2. Scan your computer for computer viruses.
  3. Check your hard drive for errors.

  PAGE_FAULT_IN_NONPAGED_AREA parameters

  The following settings are displayed on the blue screen.

  Parameter	Description
  1	The referenced memory address
  2	0: Read operation 1: Write operation
  3	Address that referenced memory (if known)
  4	Reserved

  If the driver responsible for the error can be identified, its name is printed on the blue screen and stored in memory location (PUNICODE_STRING) KiBugCheckDriver.

  Cause

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Resolution

  
  Fix a defective hardware problem: if the material has been added to the system recently, remove it to see if the error recurs. If the hardware failure existing, remove or replace the faulty component. You must run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  
  Fix a defective system service: disable the service and confirm that this resolves the error. If so, contact the manufacturer of the system service on a possible update. If the error occurs during the system startup, restart your computer, and then press F8 to menu mode characters that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time.

  
  A problem of antivirus software: disable the program and confirm that this resolves the error. If this is the case, contact the manufacturer of the program about a possible update.

  
  Fix a corrupted NTFS volume: run Chkdsk /f /r to detect and repair disk errors. You must reboot the system before the start of the analysis of disk on a system partition. If the SCSI hard disk, check the problems between the SCSI controller and the drive.

  Finally, check the system log in Event Viewer for additional error messages that might help determine the device or driver that generated the error. Disable the cache in memory of the BIOS might also resolve it.

  Remarks

  In general, this address is in the released memory or simply not valid.

  This cannot be protected by a try - except Manager - it can only be protected by a probe.

  BCCode: 50 0 x 00000050<-- read="" this="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  =========================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Execute "dbms_stats.gather_table_stats in the start = &gt; run until the peak hours = &gt; pause = &gt; restart from where he was arrested after the rush hour" mode.

  Guys,

  Please let know us if it is possible to run dbms_stats.gather_table_stats in "start = > Execute until off-peak hours = > take a break during peak times = > restart from where he was arrested after the rush hour" mode.

  I partitioned table with mammoth number of records requiring full table statistics collection once all 3 months. Stats gathering is so expensive that it takes almost 2 days to complete.  Our goal is to ensure that no SQL that runs during peak hours (15:00 to 22:00 hours) is affected by the collection of statistics. That's why we would like the stats collection to run above mode.

  Ideas, suggestions would be very appreciated and I will receive with the profound esteem.

  -Bugs

  Like others, I wonder why full stats are required.

  You nightly stats together people with reduced mobility?

  Check dba_tab_modifications for the changes made to the table, your stats every night, whether its stats are needed comes from there so if a partition has no 10% change, why you re - collect his stats for her?  There are a few other things going on behind the scenes, but close enough.  Even if you set additional stats there and kick that off, he'll simply choose the following who did not, risking several work trying to do the same thing

  theres probably 10 different ways to act how you're good with plql but generate your work statistics with something like that, then open multiple windows of sqlplus and divide it into sections while you are in the collection of statistics on several pieces at the same time.    Failure could write some autonomous plsql proc that analyzes a partition that went in there and call that any amount of time passing in the partition in a loop, but you get the idea of gathering statistics on more than one partition at the same time.

  Change the value of table_owner and table_name

  exec DBMS_STATS. FLUSH_DATABASE_MONITORING_INFO;

  Select the command from

  (select (nvl(a.updates,0) + nvl(a.inserts,0) + nvl(a.deletes,0)) * 100)

  / nvl(b.num_rows,1) as change.

  "exec DBMS_STATS. GATHER_TABLE_STATS (' |) '''' || "TABLE_OWNER" | '''' || ',' || '''' || 'TABLE_NAME ' | '''' || ', granularity =>' | '''' || 'PARTITION | ''''||  ', PARTNAME =>' | '''' ||  a.PARTITION_NAME | '''' || ', ESTIMATE_PERCENT => DBMS_STATS. AUTO_SAMPLE_SIZE, METHOD_OPT => ' | '''' || 'FOR ALL COLUMNS SIZE AUTO ' | '''' || ')' as a command

  of dba_tab_modifications a, b dba_tab_partitions

  where a.table_name as "TABLE PARTITIONNEE YOUR BIG".

  and a.table_name = b.table_name

  and a.partition_name = b.partition_name

  and nvl(a.updates,0) + nvl(a.inserts,0) + nvl(a.deletes,0) > 0

  )

  where to change > = 10

• BAM-06008: load XML is not valid; additional content was found.

  Hi all

  Version: 11.1.1.6

  We get the BAM error: "BAM-06008: load XML is not valid; "additional content were found" after I have added a field to another in a BAM Object.I have added this extra field to corresponding data objects .wsdl file as well as in the .xsd. I see the new field in the BAM. However, when I used to send a load with the newly added field it fails with the above error. However, if I add a new data object in BAM with the field he works very well.

  Why I get this error?

  Thank you

  Rahul

  I followed the following steps: -.

  1. make sure the new field entry in the ".wsdl" file that is located in the BAM folder.

  2. make entry new class in file ".xsd".

  3 do the mappings in the file ".xsl" corresponding to the action of the probe.

  Initially, I was just restart BAM and was faced with above mentioned error. After the reboot of SOA and BAM server, it started working.

• All files on my hard drive has become a shortcut, with kiieyex.exe added after the backslash in car

  original title: "kiieyex.exe" added to the files.

  Someone had this shortcut path added to the files? All files on my hard drive has become a shortcut, with kiieyex.exe added after the backslash in the car. When you click on it, I get this message: problem with shortcut shortcut, the called has been changed or moved and work more properly. You really want to remove this shortcut?  I'm not enough common sense to understand what happened, or what I need to do to access my files... Help!

  Hello

  Follow these steps:

  
  Step 1: download and run the tool of diagnosis from the link below.

  
  Difficulty of broken desktop shortcuts and common system maintenance tasks
  http://support.Microsoft.com/mats/system_maintenance_for_windows/  

  
  Step 2: run a scan for viruses on your computer.

  You can scan the computer using an anti-virus program. You can also analyze your computer online.

  Click here: http://www.microsoft.com/security/scanner/en-us/default.aspx

• The computer was restarted after a bugcheck. The bugcheck was: 0x00000001 (0 x 0000000000000000, 0 0000000000000001, 0x00000000742d2e09, 0xfffff8800aa00b60).

  Computer BSOD'd 2 x today.  The event log States:

  The computer was restarted after a bugcheck. The bugcheck was: 0x00000001 (0 x 0000000000000000, 0 0000000000000001, 0x00000000742d2e09, 0xfffff8800aa00b60).

  LEAPC_INDEX_MISMATCHERREUR (1)
  This is an internal error in the kernel. The most common reason to see this
  error checking is when a file system or a driver has several mismatched
  visits to disable and re-enable the TTB. The data key item is the
  Thread-> CombinedApcDisable field. It's two separate 16-bit
  the SpecialApcDisable and the KernelApcDisable fields. A negative value
  either indicates that a driver has disabled APC normal or special
  (respectively) without reactivation; a positive value indicates that
  a driver allowed normal or special APCS (respectively) too many times.
  Arguments:
  Arg1: 00000000742d2e09, address of function or worker system call
  Arg2: 0000000000000000, thread-> ApcStateIndex
  Arg3: 0000000000000001 (thread-> SpecialApcDisable < 16)="" |="" thread-=""> KernelApcDisable)
  Arg4: fffff8800aa00b60, call type (system call 0-, 1 - routine worker)

  Debugging information:
  ------------------

  TRIAGER: Could not open the file of triage: e:\dump_analysis\program\triage\modclass.ini, error 2

  FAULTING_IP:
  + 0
  00000000' 742d2e09?              ???

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  BUGCHECK_STR: 0X1

  Nom_processus: ccSvcHst.exe

  CURRENT_IRQL: 0

  LAST_CONTROL_TRANSFER: from fffff800032841a9 to fffff80003284c00

  STACK_TEXT:
  fffff880 '0aa00928 fffff800' 032841a 9: 00000000'00000001 00000000' 742d2e09 00000000'00000000 00000000'00000001: nt! KeBugCheckEx
  fffff880 '0aa00930 fffff800' 032840e0: 00000000'00001 c 48 00000000' 0780e0a8 00000000' 0780e970 00000980'00000018: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '0aa00a70 00000000' 742d2e09: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiSystemServiceExit + 0 x 245
  00000000' 0780e9b8 00000000'00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x742d2e09

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  NT! KiSystemServiceExit + 245
  fffff800'032840e0 4883ec50 sub rsp, 50 h

  SYMBOL_STACK_INDEX: 2

  SYMBOL_NAME: nt! KiSystemServiceExit + 245

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nt

  Nom_image: ntkrnlmp.exe

  DEBUG_FLR_IMAGE_TIMESTAMP: 5684191c

  FAILURE_BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245

  BUCKET_ID: X64_0x1_SysCallNum_4_nt! KiSystemServiceExit + 245

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Launch auditor.  You don't need to run memtest again unless the auditor is not the cause, or you want to.

  If you are overclocking anything reset by default before running these tests.
  In other words STOP! If you don't know what it means that you're probably not  
  
  
  
  
  1-Driver Verifier (for full instructions, see our wiki here)
  
  2-Memtest. (You can learn more about running memtest here)

  Former pilot who need update

  dne64x.sys (Cisco VPN driver since 2008)

  If you continue to plant I remove Symantec and using MSE instead

  Symantec is a common cause of BSOD.

  
  
  I remove and replace it with Microsoft Security if you are using Windows 7 and if you win 8 or higher, use the built-in Defender.
  
  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN
  http://www.Microsoft.com/security_essentials/

  Use it to Norton 360 http://Symantec.pcperformancetools.com/Norton-360-how-to-uninstall.html 

• The computer was restarted after a bugcheck.

  I get the following BSOD and error message resulting approximately every 10 days.  It seems more prevalent when I try to play a video from the browser, but it happened when I am just browsing the internet.

  

  The computer was restarted after a bugcheck.  The bugcheck was: 0 x 00000116 (0xfffffa80080be380, 0 x 0000000000000002, 0xfffff88003c92aec, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 020715-40185-01.

  You can download a zip file containing all my files current mini dump from here:

  https://onedrive.live.com/redir?RESID=6CBE36721A006FAF! 110 & authkey =! AMEI8sjZRhqgkT4 & ithint = the file % 2czip

  Any help would be appreciated.

  Thank you

  Bill

  Bill

  These accidents are called BCC116 and are associated with your video subsystem.  Please follow the instructions of this wiki

  
  

• The computer was restarted after a bugcheck. The bugcheck was: 0x0000003b (0xfffff880113022ec, 0xfffff88008266950, 0x00000000c0000005, 0 x 0000000000000000).

  The beginning of this month, I have built me a new platform game and installed Win 7 HP. everything worked very well at 18. I was just browsing the internet, and all of a sudden my computer froze for a second, then went to the BSOD. Inside, I saw that it was a "memory dump". He did 3 times the same day where I just internet browsing. Upset A, looked autour online and I've seen where people have said that it could be caused due to the update software. So I updated what he needed and then with my day. Well, it happened earlier this morning. I decided to look in my event viewer and see if I could find what is the problem. I found a mistake:

  The computer was restarted after a bugcheck.  The bugcheck was: 0x0000003b (0xfffff880113022ec, 0xfffff88008266950, 0x00000000c0000005, 0 x 0000000000000000). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 072414-16614-01.

  So I decided to call Microsoft and their solution to the problem was "reinstall Windows! Reinstall Windows! "WHAT! REINSTALL WINDOWS! It will take me 2 DAYS to get my computer to the way I want it with all my programs, movies, music. I know that there is another solution to this problem. I want to know the cause of the BSOD. So I was reading around and I've seen where people would say upload the file to dump memory to Skydrive and someone will look into it to find a problem. Well, I downloaded the .dmp file to my Onedrive and I hope and pray someone can read and help. (https://onedrive.live.com/redir?resid=E4B0911EE97A02C1 107 & authkey =!) AAR8h7CfZxBp7aw & ithint = the file % 2cdmp) I initially thought it was a problem of RAM because he said that it was a picture of 'memory '.

  Help, please.

  Thank you!

  Original title: Blue Screen of Death on the new computer. Help, please

  Update of these older drivers may help.

  Update Corsair Link the software to version 2.6.5214 Installer
  http://www.Corsair.com/en-us/support/downloads

  BELKIN F7D4101 Play Wireless USB Adapter firmware update

  http://www.Belkin.com/us/support-article?articleNum=4726

• The computer was restarted after a bugcheck. The bugcheck was: 0x000000d1 (0 x 0000000000000002, 0 x 0000000000000001, 0 x 0000000000000018, 0xfffff88005254d16)

  Hello Microsoft,

  Nice day!

  Laptop to our head of service stops automatically. I checked with the other posts, some are the same, but can't find the bug error we encounter. Please check the below error code

  The computer was restarted after a bugcheck. The bugcheck was: 0x000000d1 (0 x 0000000000000002, 0 x 0000000000000001, 0 x 0000000000000018, 0xfffff88005254d16). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 23025-071714-01.

  Event ID: 1001

  The dump file is shared on SkyDrive. The URL is

  https://onedrive.live.com/redir?RESID=A21E1CFD1B8F0B96%211092

  Thank you very much!

  Kind regards

  Sidney Mendoza

  Hi Sidney,

  The attached file of the DMP is to bug checking DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) .

  This indicates that a kernel-mode driver attempted to access pageable memory with a high IRQL.

  A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high. This bug check is usually caused by drivers who used a wrong address.

  BugCheck D1, {18, 2, 1, fffff88005254d16}

  Argument 1 is 0000000000000018 indicating completely invalid memory was referenced. We don't even need check, we can tell just by looking at her that he isn't a valid address in any way.

  3: kd > k
  Call child-SP RetAddr site
  fffff880'031fd608 fffff800'034 d 7169 nt! KeBugCheckEx
  fffff880 '031fd610 fffff800' 034d5de0 nt! KiBugCheckDispatch + 0 x 69
  fffff880'031fd750 fffff880'05254 d 16 nt! KiPageFault + 0 x 260
  fffff880'031fd8e0 fffff880'05257722 athrx + 0x18d16
  fffff880 '031fd930 fffff880' 05256cac of the athrx + 0x1b722
  fffff880 '031fd9c0 fffff880' 052ddb8b of the athrx + 0x1acac
  fffff880 '031fda00 fffff880' 052e4d61 of the athrx + 0xa1b8b
  fffff880 '031fda30 fffff880' 052634 to 7 the athrx + 0xa8d61
  fffff880 '031fda90 fffff880' 0523d9fa of the athrx + 0x274a7
  fffff880 '031fdac0 fffff880' 016ae9b6 of the athrx + 0x19fa
  fffff880 '031fdb00 fffff800' 034e230c ndis! ndisInterruptDpc + 0x1b6
  fffff880 '031fdb90 fffff800' 034cf8ca nt! KiRetireDpcList + 0x1bc
  fffff880'031fdc40 00000000 00000000' nt! KiIdleLoop + 0x5a

  We can see the pilot who attempted to access invalid memory was athrx.sys , which is the Atheros network card driver.

  3: kd > .trap fffff880'031fd750
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  rbx Rax = 0000000000000000 = 0000000000000000 rcx = fffffa8006a01030
  RDX = fffffa8006be3440 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff88005254d16 rsp = fffff880031fd8e0 rbp = 0000000000000000
  R8 = 0000000000013601 r9 = 0000000000000000 r10 = fffff80003462000
  R11 = 0000000000000000 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei ng nz na po nc
  athrx + 0x18d16:
  fffff880'd 05254 16 c7401800000000 mov dword ptr [rax + 18 h], 0'00000018 ds:00000000 is?

  We can see on the statement, we do not have, we didn't move a pointer in the rax register. Rax sucks because of all the x 64 non volatile registers are regarded as garbage, as well as their context is not registered in the hotpath kernel.

  ----------------------------

  1. make sure that all the network drivers (especially Atheros) are up-to-date.

  2 remove and reinstall McAfee with Microsoft Security Essentials for purposes of troubleshooting temporary, as it may very well cause conflicts NETBIOS:

  Removal of McAfee- http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  MSE- http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  Kind regards

  Patrick

• How can I activate the zoom pinch after calling preventDefault();?

  I created a chart in the edge animate which should work correctly on both the iPad and desktop computers. The html file that I create will be then fired in an iframe on a Web site as part of a larger page. I've included touch events and mouse for interactive elements, and most of the time it works fine on the desktop and iPads - except for when it is not.

  I found in my tests that sometimes a mouseOver/mouseEnter or even a click event fires despite my use of the e.preventDefault (); in my events touchStart or touchstart (I tried both). The behavior is not coherent enough for me to determine why this is happening so I have a solution for the moment - I've added preventDefault(); to touchStart in document.compositionReady:

  $(document) .one ('touchend', Function {}

  e.preventDefault ();

  });

  I understand that this is not ideal, but with deadlines and all that noise, it's the best solution I found to this day.

  It works perfectly, but as expected, it also disables the pinch zoom and pan. I don't care panoramic, but the zoom is necessary because the data points on the graph are on the small side. Can someone help me with the code, I would need to enable pinch zoom after call preventDefault()?: Or the conditional statement that would go preventDefault(); on a regular/single touch but not a pinch of touch zoom?

  I use v2014.1.1 to edge host CC on a Windows 7 machine, if it is useful.

  I cannot share my code because of the confidentiality agreement to my company, although if necessary I can probably model a simple sample - I'm hoping someone out there with more experience in the development of contact devices can point me in the right direction.

  Thank you!!

  Melanie

  This refurbished - Box dots.zip version handles the events of iOS. See private message.

  Tested: iPad (iOS 8.1.3) and MacBook (Mac OS 10.10.2) and Safari 8.0.3

  I will post a final version to improve the change of color and the text box.

• extra line after calling the model..? Call@:header? &gt;

  Hi all

  Whenever I call the RTF model, there is an additional features created after this call. For example there is an additional output of the call@header and ABC features although there are no spaces in the rtf. Is there a way to remove these additional lines?

  <? call@:header?

  <? Model: header? > region, address... <? end header? >

  ABC

  Thank you

  Sushil

  Use

  Thank you

  Bipuser

• Port resets the value after calling DAQmxStopTask.

  Hello? My device is PCI-6025E and I used to reset by sending 0x00 on #0 with DAQ digital output port. It must be reset if the VC software button power ++ is pressed.

  But after a trial of DAQmx, even after that I sent 0x00, it will be set the value of 0x00 to 0xFF after calling DAQmxStopTask. I want to know how do I know it's 0x00, ahead of DAQmxStopTask.

  I tried to read the port #0 when writing of 0x00 in this regard, but it hangs or it returns error; He said that the port is reserved and can not read the port until the task (in writing) is completed.

  Here is the code that I tested.

  error int = 0;
  TaskHandle taskHandle = 0;
  TaskHandle DItaskHandle = 0;
  uInt8 data = 0 x 00;
  char errBuff [2048] = {'\0'};
  Int32 wrote;
  Int32 read;
  uInt8 dataToRead;
  bool32 bTaskStatus;

  DAQmxErrChk (DAQmxWriteDigitalU8(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,)); creaded the 6.5.2009
  DAQmxErrChk (DAQmxIsTaskDone (taskHandle & bTaskStatus));
  DAQmxErrChk (DAQmxWaitUntilTaskDone (taskHandle, 1.5)); 6.5.2009

  {if (bTaskStatus)}
  Reading test - DI on written port0-/ / / 6.5.2009
  DAQmxErrChk (DAQmxCreateTask("",&DItaskHandle));  6.5.2009
  DAQmxErrChk (DAQmxCreateDIChan (DItaskHandle, "port0/Dev1", "", DAQmx_Val_ChanForAllLines)); 6.5.2009
  DAQmxErrChk (DAQmxStartTask (DItaskHandle)); 6.5.2009
  DAQmxErrChk (DAQmxReadDigitalU32(DItaskHandle,1,10.0,DAQmx_Val_GroupByChannel,&dataToRead,1,&read,)); 6.5.2009
  printf ("acquired data: 0x%X\n",dataToRead "); 6.5.2009

  }

  Try to use the node property DAQmx to reverse digital lines.

  According to the that you configure DI / use the following

  Int32 __CFUNC DAQmxSetDOInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Int32 __CFUNC DAQmxSetDIInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Kind regards

  Glenn

  Technical sales engineer

  National Instruments

• How can I erase whatever it is associated with to Brother DCP-1200. It was added by mistake. I need to erase all the files on my computer related to Brother DCP-1200

  How can I erase whatever it is associated with to Brother DCP-1200.  It was added by mistake. I need to erase all the files on my computer related to Brother DCP-1200?

  You uninstall it?

  I could only partially uninstall the printer. It is not to add printers & devices more. It is not in the list of program. But he is still using a driver. Therefore, I can't fix it just delete it from the Driver list. I don't know anything else to do. Can you give me any suggestions? It makes my computer thinks that it must be installed. JoAnn

• I looked under system restore points and the earlier it had was on March 27, which was still after that I got problems

  Good so my computer has some corrupted files... I looked under the system (Yes, including the section 5 days ago) restore points, and the earlier it had was on March 27, which was still after that I got problems... I want a later date... Help, please.

  Hello

  If there is no previous restore points until 27 March, including even more that 5 days more then they just do not exist

  and you can not do something which

  Follow these steps instead:

  Run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html