extra line after calling the model..? Call@:header? >

Similar Questions

• How to print line empty on the model of BEEP when the field has no value?

  I have a BEEP pattern like below and all these CHILDREN, NAME, GRAND_CHILDREN, are fields arranaged in the model as a line. REPS can enter the values in each of these areas for maximum 3 lines. The first 2 rows have values and the last is empty.
  
  CHILDREN: NAME: GRAND_CHILDREN: NAME:
  Son daughter of John Smith
  Daughter Laura son Kevin
  
  In the third row, because the fields have no value, the report print empty lines, but I want to remove this blank line and display only the rows (first 2 rows) that have values for the fields.
  
  Does anyone know how to get around this problem? Please help me solve this problem.
  
  Thanks in advance,
  RV

  Just having a condition in 3rd row, where DependentDD3 is printed.

  -3rd line 1st column
  last column - 3rd row

  This is true for nullity of DependentDD3. If you want to check for all columns and hide, use condition as

• Screen flashing horizontal lines after replacing the RAM

  Hello world

  Today, I replaced the original 2 2 GB RAM each with 2 other 4 GB each (Kingston) for better performance.

  I have a Macbook Pro end 2011 15 ", IOS 9.3.1.

  I opened the computer it vacuum cleaner very carefully, with the lowest power and then I removed the two RAM.

  I'm not new, the machine worked perfectly for 20 minutes, then the screen went black (electricity was running in it, I could see some lights on the bottom), I did close it with the button, turn it on and horizontal lines appeared.

  I turn again and nothing has changed. I replaced the new memory with the 'old' and I still have horizontal lines that cross the monitor (white, grey, black).

  Any idea of what is happening and how to fix it?

  Thank you in advance!

  That could be the problem:

  http://www.Apple.com/support/MacBookPro-videoissues/

• Command line after erasing the hard drive

  I work for a charity and have inherited a HP Compaq 6735 s in which the HD has been erased. I have no recovery disks. Simple question - how do the command line? The start menu is exactly that, a menu. Can I go out to a command line?

  To run a command, you must first run a code it-such as files on the hard drive or a bootable floppy. There is no file on a hard drive wiped. Start with a Windows or other bootable media diskette.

  You should be able to get the installation of HP media. Give them a call.800 - 334-5144 if you are in the United States or to the CA.

  If you live in another part of the world, start here >Contact HP

• How to keep the control on the same line after clicking the Cancel button

  Hello

  I use JDev 11.1.2.4.

  I have a search in a table (form A) that has a link to change another form (form B).

  Form B have two save and Cancel buttons with Commit and Rollback actions.

  Action on the Undo button is

  ADFUtils.findOperation("Rollback").execute ();

  Question: Suppose I'm at rank 3 on the form and click on the link to call the B form. Now, when I make some changes to the form B and press the Cancel button, the control returns to the row 1. I want to keep the control on line 3.

  any ideas?

  Thank you

  What do you mean by form? is this page?

  Is the form B and form A in the same page or diferrent?

  If the 2 form in diferrent pages you can add parent the iterator in the pageDef. of the child page

  To add iterator the pageDef parent. child follow this:

  1 - Open pageDef. of the child.

  2 - press executable section

  3. in the Insert item dialog box select 'Iterator' and then 'Ok '.

  4. you will find the DataControl extend above then select the Master iterator, then press 'Ok '.

• Printing printer Lexmark 2600 problems - it prints half a line after replacing the color cartridge

  It prints half a line, if the top or the bottom of it and the cutting of the other party.  This happens on every third line.

  This started happening when I replaced a color cartridge and ran the alignment page.  Before replacing the cartridge, it prints very well (except that the color cartridge started missing).   When I noticed what was going on, I took both cartridges on and then put them back in and had to print the alignment again page.  Yet the problem persists.
  I checked the Device Manager, and my drivers are up to date.  I also checked all connections.
  Any suggestions are welcome.

  Oh boy.  I don't know what I thought.  It just had to unplugging everything & then reconnect them, turn off & on.  This took care of it - seems so simple now.

  I guess it was my new laptop which has the printer all confused.  Win7, my find of CL.

  Insofar as the Lexmark support, I have not yet that day.  In any case, it comes to X 2690 model I had for centuries, so I guess that support would be of any help.  I mean, the guarantee missed a long time ago.

  Thank you for taking the time to answer.

• Number of incorrect lines after clearing the filter in the Table.

  Hi all
  
  View unlimited workflow activity
  JDev 11.1.1.3, ADF Faces RC
  
  I have parent/child af:table in jspx page. Child table a facet of default filter operation. His work.
  Before applying the filter I checks the number of rows in the table using the iterator vo. The problem is after having emptied the filter, same table restores with original lines, in the link layer
  correct the number of lines is not. The number of lines is even what I got after filter, same table shows all lines before filtering. I have some function based on this number of lines.
  
  Please note that filter to is depolluted programmatically.
  
  I tried below everything else but not able to get the number of rows real again.

  dcBindingContainer.refreshControl;
  dcIteratorBinding.refresh(DCIteratorBinding.RANGESIZE_UNLIMITED);
  dcIteratorBinding.getViewObject.executeQuery();

  Hello

  Try the processing of the request instead of queuing it incase if you want to see the result immediately.

  For example.

  // Replace your reExecuteTableQuery method with following:
  private void reExecuteTableQuery() {
       resloveMethodExpression("",Object.class, QueryEvent.class, new QueryEvent(getT4(),getTableQueryDescriptor()));
  }
  
  private Object resloveMethodExpression(String expr, Class returnType, Class argType, Object argument) {
       return resloveMethodExpression(expr, returnType, new Class[] { argType }, new Object[] { argument });
  }
  
  public Object resloveMethodExpression(String expression, Class returnType, Class[] argTypes, Object[] argValues) {
       FacesContext facesContext = FacesContext.getCurrentInstance();
       Application app = facesContext.getApplication();
       ExpressionFactory elFactory = app.getExpressionFactory();
       ELContext elContext = facesContext.getELContext();
       MethodExpression methodExpression = elFactory.createMethodExpression(elContext, expression, returnType, argTypes);
       return methodExpression.invoke(elContext, argValues);
  }
  

  Jean Lou

• get the status of 4500 printer wireless hp envy line after changing the wireless router.

  I use 8.1 window and I want to HP 4500-e printer all in one and all a works very well. My wireless router was going bad, so I replaced it. After the installation of the new router and get all my computers and devices (including the hp 4500 wireless printer) connected to the new network, I tried to print. The printer is waiting to print which was sent to her, but its status is set to offline mode. The box in the sign that says "set printer to run in offline mode" is not checked. but the status says HP ENVY 4500 SERIES (NETWORK) - in offline mode.  Anyone else has this problem and do you know how to solve this problem. I tried to turn off the computer and the printer and restarting their and running a hp Diagnostics program, but he says that everything works fine.

  Replacement of your wireless router try now.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• point of origin by default is Center of line after placing the anchor to end when opening scale/rotation

  I'm trying to get the point of origin to stay the final anchor before open a scale or Rotate dialog as follows...

  

  opening scale or do rotate here, the default origin is the center of the line again. How to prevent this?

  

  ALT-click about to original desired with the tool.

  Please also read the manual.

• Unable to set keyframes in the audio clip selected with the pen tool - can no longer see the volume control line after developing the clip. What could be the problem? This seems to be the problem on any project that I opened.

  Cannot set keyframes in the audio clip selected with the pen tool - cannot see even the line volume control more to set keyframes on having developed the clip. What could be the problem?  I use the first CC pro @.

  You can use the Ctrl key and then click with the regular selection tool, clicking with ctrl will make a new keyframe. in this way, have no need for the tools. CTRL has other great shortcuts that will stop you having to spend retouching pads tools too.

  If the automation keyframe line is missing, you can switch on and off in the menu sequence.

  

• How to avoid a line empty in the model of .rtf

  Hello
  
  I developed a .rtf report where I have to print the notes of the seller on the table of the line. I want to avoid the empty line if there is no value.
  
  I tried with if condition and decode the State, it did not work. <? xdofx:decode(POL_NOTE_TO_VENDOR,'','',POL_NOTE_TO_VENDOR)? >
  
  Pls advise.
  
  Thank you
  Sridhar

  I guess that the condition is a column. Check if the condition works.
  Remove the space before the end if.
  If this condition does not work, check if the field is referenced correctly.

• Help on the model and aggregation

  Hi Experts,
  
  I use models to calculate the value of Member individuals (at the leaf level) of a size. The expression is like that
  A = B - C where: A is at the leaf level and B and C are at the second level from the top. The values are precalculated for thisdimension so B and C are available after the charge itself. After running the model value happens correctly for A. The cube is precalculated for all dimensions. All dimensions are had set to base hierarchies except time.
  
  Now, I want to consolidate this value to all the ancestors of A and for this reason I am running after an order:-
  
  -> aggregation PRTTOPVAR using < default aggmap >
  
  When I do this, data calculated for A also disappears and shows 0.
  
  My questions are:-
  
  1. what should I do to aggregate the data calculated at the level of all?
  2. why I m losing any data that is calculated after the execution of the aggmap default?
  3. as A, B and C belongs to the same dimension, I don't use other dimensions in the type clause of the dimension. Is this good? If Yes, then how the values will be calculated for a different combination of dimensions?
  
  Any help would be much appreciated.
  
  DB: 10.2.0.4
  MN: 10.2.0.3A
  OLAP applied patch.
  
  Thank you
  Brijesh
  
  Published by: BGaur on October 10, 2008 20:29

  Yes you are right; without naskip2 the value 'Yes' all NA value in your calc will return NA as the result, even if other cells of the aggregation containing no data.

• Space by default after calling model sup

  Hi all

  I call template void in the report of the rtf header. Even if there is no space between the header and the title of the report, when the preview image shows a gap between the title of model output and sub report. There are no spaces in the sub model. Is that it default rtf creates spaces after calling model sup in the header?

  Thank you

  Sushil

  Your sub-model code includes the text "DW DISCOUNT DATE:" in a table? If so, edit the property table in your subtemplate-> skin-> autour

  I think I sent you a model modified by e-mail and which included the fix.

  Thank you

  Bipuser

• Port resets the value after calling DAQmxStopTask.

  Hello? My device is PCI-6025E and I used to reset by sending 0x00 on #0 with DAQ digital output port. It must be reset if the VC software button power ++ is pressed.

  But after a trial of DAQmx, even after that I sent 0x00, it will be set the value of 0x00 to 0xFF after calling DAQmxStopTask. I want to know how do I know it's 0x00, ahead of DAQmxStopTask.

  I tried to read the port #0 when writing of 0x00 in this regard, but it hangs or it returns error; He said that the port is reserved and can not read the port until the task (in writing) is completed.

  Here is the code that I tested.

  error int = 0;
  TaskHandle taskHandle = 0;
  TaskHandle DItaskHandle = 0;
  uInt8 data = 0 x 00;
  char errBuff [2048] = {'\0'};
  Int32 wrote;
  Int32 read;
  uInt8 dataToRead;
  bool32 bTaskStatus;

  DAQmxErrChk (DAQmxWriteDigitalU8(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,)); creaded the 6.5.2009
  DAQmxErrChk (DAQmxIsTaskDone (taskHandle & bTaskStatus));
  DAQmxErrChk (DAQmxWaitUntilTaskDone (taskHandle, 1.5)); 6.5.2009

  {if (bTaskStatus)}
  Reading test - DI on written port0-/ / / 6.5.2009
  DAQmxErrChk (DAQmxCreateTask("",&DItaskHandle));  6.5.2009
  DAQmxErrChk (DAQmxCreateDIChan (DItaskHandle, "port0/Dev1", "", DAQmx_Val_ChanForAllLines)); 6.5.2009
  DAQmxErrChk (DAQmxStartTask (DItaskHandle)); 6.5.2009
  DAQmxErrChk (DAQmxReadDigitalU32(DItaskHandle,1,10.0,DAQmx_Val_GroupByChannel,&dataToRead,1,&read,)); 6.5.2009
  printf ("acquired data: 0x%X\n",dataToRead "); 6.5.2009

  }

  Try to use the node property DAQmx to reverse digital lines.

  According to the that you configure DI / use the following

  Int32 __CFUNC DAQmxSetDOInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Int32 __CFUNC DAQmxSetDIInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Kind regards

  Glenn

  Technical sales engineer

  National Instruments

• How can I activate the zoom pinch after calling preventDefault();?

  I created a chart in the edge animate which should work correctly on both the iPad and desktop computers. The html file that I create will be then fired in an iframe on a Web site as part of a larger page. I've included touch events and mouse for interactive elements, and most of the time it works fine on the desktop and iPads - except for when it is not.

  I found in my tests that sometimes a mouseOver/mouseEnter or even a click event fires despite my use of the e.preventDefault (); in my events touchStart or touchstart (I tried both). The behavior is not coherent enough for me to determine why this is happening so I have a solution for the moment - I've added preventDefault(); to touchStart in document.compositionReady:

  $(document) .one ('touchend', Function {}

  e.preventDefault ();

  });

  I understand that this is not ideal, but with deadlines and all that noise, it's the best solution I found to this day.

  It works perfectly, but as expected, it also disables the pinch zoom and pan. I don't care panoramic, but the zoom is necessary because the data points on the graph are on the small side. Can someone help me with the code, I would need to enable pinch zoom after call preventDefault()?: Or the conditional statement that would go preventDefault(); on a regular/single touch but not a pinch of touch zoom?

  I use v2014.1.1 to edge host CC on a Windows 7 machine, if it is useful.

  I cannot share my code because of the confidentiality agreement to my company, although if necessary I can probably model a simple sample - I'm hoping someone out there with more experience in the development of contact devices can point me in the right direction.

  Thank you!!

  Melanie

  This refurbished - Box dots.zip version handles the events of iOS. See private message.

  Tested: iPad (iOS 8.1.3) and MacBook (Mac OS 10.10.2) and Safari 8.0.3

  I will post a final version to improve the change of color and the text box.