additional NIC connected to the second router interface does not have IP

Similar Questions

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• After update my iPad iOS 9.2.1 to 9.3 live 2 I can't connect to the activation server and does not have the latest version of iTunes to activate

  I downloaded the update to iOS over-the-air 9.3 and installed. Setup cannot connect to the server to activate the ipad2. The message is to try again in a few minutes or connect to iTunes to activate. Yes, I have the most recent and current iTunes version, so this isn't the issue. iTunes recognizes the iPad as my ipad2, but cannot do what he done to be able to use iTunes to activate it. I have 2 iPads. iPad 2 and iPad 4th generation. iPad 4th generation downloaded on-line and updated and active and install without problem. IPad2 updated and not can not connect to the server to activate and I connect to iTunes to activate as the message says, but iTunes cannot activate because it sees my ipad2 and that's all that. Of course, I'll try again once activate WiFi tomorrow but any suggestions would be greatly appreciated.

  Thand you

  same problem with you jerryenea. This seems to happen ipad 2 only? my itunes cannot check my ipad

• I am connected but the network properties window does not show the size of the packets to all the

  I am connected but the network properties window does not show the size of the packets to all the

  Hi asaimas,

  You can follow this link & check if it helps:

  Configure the Option of configuring server network packet size

  Hope the helps of information.

• Having hard time you sign in to one account on my computer. "The group policy service does not have log on." Access denied. "

  Trying to connect to one of the accounts on my computer and the message telling me "the group policy service does not have the journal on.»  Access denied. "  Can someone help me with this?

  Hello

  1. is the computer connected to a network domain?

  2 are you facing this problem into account administrator? Do you have other administrator accounts enabled in the computer?

  3 did you changes to the computer before the show?

   
   
  Method 1:
  
  Check if you are able to start the computer in safe mode.
   
  Step 1: Safe Mode
  
  Start your computer in safe mode and check the number.

  To start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

   
  If you are unable to boot into safe mode, please let us know.

  Step 2:
  

  You run the system restore in Windows recovery environment?

  If this isn't the case, I would say you can do a system restore to the Windows recovery environment. Follow the steps in the section provided.

  http://support.Microsoft.com/kb/940765/en-us

  
   
  I hope this helps!

• Using the stored procedure: Source does not have a target executable

  I'm a guy from MS - SQL, so I'm fairly familiar with T - SQL syntax, but feels a heck of a time trying to take the code I wrote for SQL and turn this works with Oracle.
  
  in any case, I'm using Oracle SQL Developer, and I have a stored procedure that calls the Alter Table statement and adds a column. Just trying to get this one to work before moving on to the other that I have. I get the message that source does not have a target executable when I try to run this command.
  
  create or replace PROCEDURE rta_conv_addcolumn (rtatablename1 in varchar (20),)
  rtatablename2 in varchar (20),
  rtacolumnname in varchar (256),
  rtacolumninfo in varchar (256))
  AS
  DECLARE rtasql VARCHAR (4000);
  BEGIN
  IF EXISTS (SELECT * from user_tables WHERE table_name = rtatablename1)
  AND NOT EXISTS (SELECT * from user_tab_columns WHERE column_name = rtacolumnname)
  AND table_name = rtatablename1)
  AND NOT EXISTS (SELECT * from user_tab_columns WHERE column_name = rtacolumnname)
  AND table_name = rtatablename2)
  Then rtasql: = ' ALTER TABLE ["+ rtatablename2 +"] ADD "+ rtacolumnname +" "+ rtacolumninfo;
  Run (rtasql);
  END rta_conv_addcolumn;
  
  If I try to compile I get the following messages, which make no sense, since the syntax I use to declare the input variables seems to be good.
  
  Error (1.54): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (2.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (3.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (4.29): PLS-00103: encountered the symbol "(" quand attend une deles de valeurs suivantes:: =.), @ default % of the characters of the symbol ': = ' has been replaced by "(" pour continuer.)
  Error (6.1): PLS-00103: encountered the symbol "DECLARE" when expecting one of the following: begin function package pragma procedure < an ID > subtype type use < a between double quote delimited identifiers of > form current cursor external language the symbol 'start' is substituted for 'SAID' continue.
  Error (15.5): PLS-00103: encountered the symbol "RTA_CONV_ADDCOLUMN" when expects it one of the following values: If

  Adds the column to the table specified in rtatablename1, if there is neither rtatablename1 nor rtatablename2.

  NOT TESTED

  create or replace PROCEDURE rta_conv_addcolumn(rtatablename1 in varchar,
  rtatablename2 in varchar,
  rtacolumnname in varchar,
  rtacolumninfo in varchar)
  AS
  rtasql VARCHAR(4000);
  count1 number;
  count2 number;
  count3 number;
  BEGIN
    SELECT count(*) into count1 FROM user_tables WHERE table_name = rtatablename1;
    SELECT count(*) into count2 FROM user_tab_columns WHERE column_name = rtacolumnname AND table_name = rtatablename1;
    SELECT count(*) into count3 FROM user_tab_columns WHERE column_name = rtacolumnname AND table_name = rtatablename2;
    IF count1>0 AND count2 = 0 AND count3=0 Then
      rtasql:= 'ALTER TABLE '|| rtatablename1 ||'ADD ' || rtacolumnname || ' ' || rtacolumninfo;
      Execute immediate rtasql;
    END IF;
  END rta_conv_addcolumn;
  /
  

  Max

  Published by: Massimo Ruocchio, December 12, 2009 02:15
  Missing AND

• I'm trying to get an 8500 a connected via the wireless, but it does not link to d-link dir-615 router.

  The printer connects to the same router through the wired port but will not get a valid address using the wireless.  The IP is 169.254.140.246 in the wireless network test report, although everything is named PASS

  I changed from WEP to WPA and now everything works.  Now, to spend a few hours by changing everything in the House.

• the button new folder does not have System File Checker says no breach of integrity

  Mem of Windows 7 64 bit, Sony VAIO, 8 GB, the latest journals to install checked no found error. Keyboard shortcut for the new folder does not work, but good ciick new-folder is there and works. Said it was problem-no hard drive problems, File Checker said no violations. Did usual defrg, reg cleaner, virus scans, etc. New folder button Windows Explorer stopped working after I upgraded my backup of instant backup software Memeo Memeo Backup Premium. When I return at the moment (the button) works when I uninstall Instant, it works, but when I insall Premium button no longer works. Explore premium a integration of windows and instant does not work. I say that the problem is because of this, but of coarse Memeo said it's a hard drive issue or microsofts problem. No hard drive problem, it's almost all scanned and new directions. The registry is scanned. I played in windows since 3.0.Granted I'm not a programmer, but I put togeather computers (all Windows Basic) since the 1980s. Did do a little programming for timex sinclair Boy I'm giving my age :) away  I solved just a poblem resolved not technicians at Sony. They told me that my only option was to restore my computer to factory State and again UGH!  Found the problem of sony, a former .exe file which does not have ugraded when needed, the deleted files and the sony program now works fine!  If the ideas on my "new folder button?

  Found the answer! It was just like I thought Memeo Backup Premium has a subprogramme called backup that he mixes with the Explorer of Windows 7, uninstalled this (backup) and the new record button works again. Memeo people had me uninstall the rest of the software and gave me a link to download the software less backup. Now, I'm trying to find out if I will return my money or a fixed copy. No answer yet! But I don't think they work on Friday, so I'll have to wait beyond Monday to see if they're going to answer me. I tracked their problem they should pay me ;)

• I have CS4 and updated my OS x 7.5 in Yosemite 10.5 - applications are still there but will not open. He said that I had to restart the computer after which he said that there is an error 6. I have the license key but does not have a place to insert it.

  I have CS4 and updated to OS x 7.5 to 10.5 Yosemite. Applications are still there, but can not be opened. After the restart, the application displays error 6. I have the

  Original key, but does not have a place to enter.

  We recommend that you reinstall the applications. You can use the Cleanup tool to remove the applications and products CS4 download from here.

• My IPad is connected to the WiFi router but will not connect to internet. My Internet works on my IPhone and Mac Book

  Since last night, my IPad connecting to my WiFi router, does not connect to the internet.

  Internet connection works for my IPhone and MacBook.

  Hello

  Go to settings resets the network settings on iPad.

  After reset, enter your key wireless router.

  See you soon

  Brian

• HP OfficeJet Pro 8600: HP OfficeJet Pro 8600, connected to the local network but does not print a printer on the same LAN

  HP OfficeJet Pro 8600, connected to the local network but cannot print printer on the same local network.

  Work tried fixing it but all attempts fail.

  Firewall disabled.

  Printer recognizes the router's LAN.

  Was also pointed out that the port does not communicate, can not remove it; Cannot add another...

  Printer does not print.

  How can I fix?

  Hi @AnnisMonadjem,

  Welcome to the Forums of HP Support!

  I understand that you are unable to print to your printer HP Officejet Pro 8600. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  When you say 'LAN', are you referring to the network or you try to share the printer on the network?

  How is the printer connected? (Ethernet/WiFi)

  If you have noticed that the port is causing problems, please download and run the print and Scan doctor, it will be probably diagnose and fix the problem you are experiencing.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  HP has several Officejet Pro 8600 series.

  What is the name and the product number of your printer? How can I find my model number or product number?

  • Update the firmware of the printer.
  • Don't hide the SSID (network name).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • You have a double router broadband? Make sure that the two groups were not the same network name.

  If the problem persists, you may encounter an IP address conflict. It's a good idea to assign the printer a static IP address outside your DHCP range. For example, some routers default DHCP is located between 192.168.0.100 to 192.168.0.200. So, I would use 192.168.0.232.

  To assign the static IP address, use the following steps as a guide.

  • Print a Page of Network Configuration menu of the printer front panel. Note the IP printer. IPV4 address
  • Type the IP address in the browser to bring up the SAP.
  • Choose the network tab, then wireless on the left side, and then select the IPv4 tab.
  • Select Manual IP.
  • Enter your IP address manual (192.168.0.232)
  • Enter 255.255.255.0 for the subnet mask, except if it is different.
  • Enter the IP address of your router that sits on the Network Configuration Page) for the default gateway.
  • Please, click on manual DNS server. For the preferred DNS Server Manual please enter 8.8.8.8 and the Alternate DNS Server Manual, please enter 8.8.4.4.
  • Click on apply.
  • Restart the router, the printer and the computer.
  • Test printing and scanning.

  If the problem persists, download and run this patch rollup: resolving printing issues in Windows 7 and Windows Server 2008 R2

  • Try printing and scanning.

  In addition, if you are still having problems try the steps in this guide, HP printers - "offline" Status Message printer (Windows 7).

  Continue on, if the problem persists.

  Important!   Delete the temporary files and folders by using the disk cleanup utility

  1. Open the disk cleanup utility:

• Unable to connect to the Internet error "Windows does not detect a network card installed properly"

  Internet does not connect and connection was well 5 hours ago. Message states: "Windows did not detect a network card installed properly" How should I proceed? Connection is on the laptop, but also other devices. Problem is only with the office.

  Any help is appreciated

  OT: Internet connection

  Hello

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Impossible to connect to the internet code 31 does not update the code of 31 drivers

  Windows vista cannot connect to internet code 31

  Hello
   
  1. when the question is is produced?
  2. you remember to make changes to your computer before the problem?
  3. do you have a cable or a wireless connection?
  4. what device driver indicates the error code?
   
  Follow the steps below and see if they help.
   
  Step 1:
   
  a. go to start then type "cmd" in the search bar and press ENTER.
  b. once the command prompt opens, type ' ipconfig/flushdns' press ENTER.
  c. then type ipconfig/registerdns, and then press on enter.
  Reference:

  http://support.Microsoft.com/kb/310123
   
  Step 2:
   
  Uninstall and reinstall the network card.
   
  a. Click Start, type device manager in the search box of start and press ENTER.
  b. Locate the network adapters and expand the same.
  c. Select the wireless connection, right click and choose uninstall.
  d. restart the computer, if prompted.
   
  Pilots should settle automatically after the computer restarts.
   
  Now you can install the latest network card drivers and see if that fixes the problem.
   
  See the following article from Microsoft for more information on the update of drivers:
   
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• "No connection to the server of VR: does not not." after upgrade to vSphere 5.5

  As part of the upgrade to vSphere 5.1 to 5.5 along http://kb.vmware.com/kb/2057795 I've updated vSphere replication to 5.5.0.0 build 1309877. All rehearsals continued well then. I only add the new vCenter replication and it stopped for the old.

  After the migration of all VM including device just RV improved another 5.5 ESXi host I upgraded from original host and migrated the back of some VM. I noticed that only this VM is replicated again then. All other zeroes had "no connection to the server VR: does not not." and "Violation of RPO" messages (including RVS). If I migrate the original replication host virtual computer is restored. If I migrate to another connection from host to the server of VR is lost again - no matter what a host running VR.

  Any idea, please?

  Yes, it's possible, but I just wanted to rule out any more simple explanations first. I was worried especially when you said the VR server could not ping itself, but perhaps I misinterpreted what you were saying.

  In all cases, you can verify if this is your problem by looking for a line like this in the esx.conf of the hosts that you upgraded:

  / NET/vmkernelnic/Child [0001] / tags/4 = 'true '.

  If so, remove the line in the esx.conf and restart the host. Then, once the host is back, check that the network adapter assigned to the vmkernel is an accessible IP address.

  In my view, that the part "child [0001]" may be different on certain configurations if you do not find the exact line I've specified above, check around the lines part of [another] child.

• Favicons repeat through tabs, behind the label text when you switch between tabs. 37.0.1 sometimes the Green scroll bar does not have too

  Please mention the attached JPEGS. When I switch between tabs, favicon image repeated behind the text. In some cases, the image of the vertical scrollbar is messed up, it cleared up when I click on it. -Does not appear to affect performance, simply annoying. Thank you!

  Please temporarily disable your Avast extension to see if it has to do with it.

  Try Firefox Mode without failure:

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.