Additional part

Similar Questions

• additional part back Center together!

  Ok... I feel stupid... I dropped my Centro in water today... ran at Radio Shack for a TORX... Centro disassembled & he jumped in a food dehydrator (softer than a fan or hair dryer). problem is that there is a part that I can't find a place for. and which direction is "up"?  I watched the video on youtube (pdaparts.com) on several occasions & just didn't see this part anywhere!  can you help me?

  It is 5/8 "wide, 1/4" deep and 1/4 "high with contacts copper on one side. It seems to be a rubbery shell that contains a piece of metal with a reference number to this topic: AACO71121.3B

  Thanks for your post! It's a great reminder to close this line...

  The piece in question has proved to be the speaker internal... one to listen to when you hold the phone to your ear.

  The phone worked well with bluetooth & speaker, but when I used it to Palm intended, I couldn't hear anything.

  Jump it back apart, pressed the piece in ' way to the top & Alto! fully functional & additional parts not more.

  My thanks to all those who fought with me!

  Message relates to: Centro (Sprint)

• Additional parts (?) HP Photoshop 7510

  I bought a HP Photoshop 7510 and during the initial installation, the first page that had to be printed over the head alignment caused a paper jam.  I opened the back of the printer to remove the paper jam and found a loose part that caused the jam - the black part on the pictures (hard plastic).  I removed the part that I couldn't tell where it was supposed to go, or if it is still a part of this printer.  After closing at the back of the printer, the paper was jamming isn't more, but instead being drawn in 5 to 7 sheets at a time.  I removed all the paper in the tray paper and then found the Green Party in the photos (soft rubber).  Both parties seem to mate together as shown.  I completed the game to the top of the printer, and it seems to work normally.  I tested the printer, scanner, charger automatic documents, duplex printing, photo printing and printing on letter paper and everything works well.  So my question is: are these pieces vital to the operation of the printer, and if yes, where are they supposed to be installed?  I tried to call tech support and they were, of course, no help at all.  Thanks in advance!

  

  

  

  I found this Video of paper jam , and he clearly showed my finicky part when they took the duplexer on the back.  Since then, I reinstalled it and it works great!

• Replacement card mother HP Pavilion DV8T-1100, an additional part!

  Long story short: laptop coffee, kid,.  If I replace the motherboard, and it's been a loooong time I took apart, and as I am it back together I think I have an extra room of the Council and I have no idea where he's going!  can anyone give me a tip?  Image below...

  

  I knew the SECOND I submitted that I understand.  It's the power button!  lights just before the configuration of keyboard/cover of the speakers...

• Help with upgrade parts! ThinkCentre M58 7244

  I recently purchased the Lenovo ThinkCentre M58 (7244A 36) computer to desktop PC off newegg, and I want to improve the additional parts. I just want to know the following

  (1.) what type of processors are compatible with it?

  (2.) what type of RAM is compatible with it?

  (3.) what kind of graphics cards are compatible with it?

  Help would be very appreciated. It's the computer, by the way: http://www.newegg.com/Product/Product.aspx?Item=83-108-659&SortField=0&SummaryType=0&Pagesize=10&Pur...

  
  

• In Thunderbird, can I received email from one address to be text only (no html)?

  LinkedIn sends updates to the son of group discussion with a "teaser" of comments posted in a comment. I heard somewhere that if I can convert email of the SENDER in the text only (no), then I will receive the full text published in this comment.

  I have no need to do this for any other SHIPPER to my system.

  So, is this possible?

  TIA

  A simple answer to your question is NO, it cannot be done for just a single sender. All messages would be treated the same.

  You may have heard that the text version only contains the entire text of the html message. This is true if the message was composed in BOTH formats 'html' and 'text', (a multi-part format)

  If the update of LinkedIn does not give the entire message in html format, change to display it as text will display any additional parts of the message.
  The text version is the same message as the html version, but without the html tags.

  The following article has a section named
  'Send plain text and HTML'
  
  http://KB.mozillazine.org/Plain_text_e-mail_%28Thunderbird%29

  TB - 38, 3 Win10-PC

• Upgrade Pro Mac 2009 Options

  As the owner of the latest Mac Pro, I'm looking into buying one of the old Pro models for the update. In particular, the model 2009. What I want to know is I am able to upgrade the processor with all the same socket?

  I'm looking at one is double a processor with two cores quad but I noticed that I can get a couple 6 hearts and I want to share.

  In addition, would have problems with jump in a recent quadro card?

  And for someone who has updated an older, are there pitfalls that I should look out for?

  Thank you

  The 2009 and later a CPU and RAM slots began backplane and moved to a 'plateau' at the bottom of the sliding chassis. There are two cards of the 'plateau' different processor - one with chip socket a processor, one with two Sockets. Map of all plate can be replaced by another, but both cards connectors are always in demand and therefore expensive.

  You can replace the processor chip, but you must be very attentive to full coverage vs without eyelids and get the correct physical processor. In addition, parts for dual sockets are not the same party as the mono-socket part.

• Question about faulty adapter and warranty

  Dear community,

  I would like to ask for your help, because I am not fully aware of the security regulations.

  My Toshiba laptop charger is seen error contact for a long time, but I need on a daily basis of the device, and at the gas station, I was told that I have to give my computer laptop too at least a week.
  I don't have enough money for a new charger, but maybe I could fix it.

  My question is that if I fix the charger, will I lose my warranty for the device in the laptop too, or just the charger?

  I thank in advance for your answers is, it is really important for me.

  Hello

  Laptops as well as the laptop parts are covered by the standard warranty.
  AFAIK the laptop as well as parts must be repaired by the authorized Toshiba service provider to keep the warranty valid.

  I m not very good if an adapter can be repaired. I think that this part would be simply replaced. So if you have a defective power adapter, I recommend you contact the maintainer authorized Toshiba in your country to get a new part.

  Also, you should be aware that the use of defective parts (power supply, for example) can damage additional parts like laptop's motherboard and this could lead to expensive repair procedures.

• Colors of strange display on the Satellite A30 101

  The last time the monitor with my A30-101 started showing color strange that white is black, rose is green, etc. When I connect the computer to an external monitor, everything is OK.

  Is it possible that a problem with the connection from the monitor to the graphics card or the TFT should be completely changed?

  Hello

  There's certainly nothing wrong with the graphics card, but as you said maybe with the internal display or with additional parts as i.e. fl-inverter.
  But in my opinion, it looks more like malfunctioning monitor TFT however, I recommend checking out parts and a laptop technician with professional experience needs to know what is the problem

• Compatible battery for Satellite Pro A10

  I have a portable Satellite Pro A10 and the battery reaches the end of its useful life and requires replacement. The model number is PA3284U-1BRS is DC10.8V 3600mAh.

  The current site has no record of such a device is the compatible battery?

  Thanks in advance

  Hello

  Why you n t check the area OPTIONS AND ACCESSORIES on the European site of Toshiba?
  There, you can search all compatible devices and additional parts!

  According to this page, you can use these batteries:
  Battery (Li - ion, 6 cell, 3600mAh) PA3284U-1BRS
  (Li - ion, 6 cell, 4400mAh) battery PA3285U-1BRS
  Battery 6 cells, 4400mAh PA3285U 3BRS

• HP Envy Phoenix 810 - 170st: Startup Hp Envy 810 - 170st problem

  https://www.YouTube.com/watch?v=bmpOezTOfPU

  Greetings,

  My pc is having a serious problem to initialize. When I turn it to be closed, it will not display. The lights come on, but the graphics card is not set up to start the monitor. And the fan is running at its top speed. It will be either do it for about half a minute and close, or should I stop it manually. Usually, the next attempt to start, will show the power comes on for about 2 seconds and then right back off the coast. After that, he goes on, and then will begin a normal start procedure. The problem started a while after obtaining a SSD hard drive.  The SSD is used as primary Windows startup disk and 2 3 TB drives were used for storage.

  The problem is very confused, as one of the 3 TB drives the windows main drive helped, but do not solve the problem. So, I can not link on the SSD drive, running the pc on ACHI vs sound original RAID, or if there is a real problem of power or the motherboard.

  I have a box from looking at it, but this brings us to another problem. I don't have the pc in the configuration that was causing the most problems, because an associate of HP called me, said that if I sent all the additional parts, they would probably not returned. I could lose my extra HDs? And if I can't properly present the problem, is it possible that it can fail, and my machine is back with the same problems?

  SSDS are sometimes a problem and I don't really understand it.  In the early days the cloning software was having a problem with the SSD drive.  Different manufacturers have problems with the motherboard controllers, etc.  Now, I assumed that the problems are more or less solved.  It could be in one of these areas, but check with the Samsung forums to explore options for this SSD model.

• Installation and layout - by the end of 2015 iMac 27 "5K of RAM

  Ordered a new mac (end of 2015 iMac 27 "5K retina) with 8 GB of ram (2 x 4 GB).  I bought from another 2 x 4 GB of ram to do the 16 GB mac. What is the optimal layout for the 2 pieces of stock and 2 additional parts:

  1, New1, Stock 2, 2 new stock or

  Stock 1 Stock 2, 1 News 2 news

  Or it does not matter? Does it affect the double channel because they are 2 pairs?

  Thank you

  It's incredibly simple, install new RAM in the empty slots and that's all you need to do. Nothing to worry about at all!

• Qosmio G30 - 163 - can I update the graphics card?

  Hello

  I bought a new monitor for my PC Toshiba Qosmio G30-163.

  The screen is a Samsung SyncMaster 305 T more. Link: Samsung SyncMaster 305 T more: DSB http://edbpriser.dk/Products/Listprices.asp?ID=447236&searchArea=products&Soege = samsung
  The screen has a resolution of 2560 x 1600.

  My problem is that my laptop Toshiba graphics card can run an og resolution 1900 x 1200.

  Is it possible for me to buy a new graphics card and insert it into my Toshiba laptop?

  -So, I'll be able to run the resolution of 2560 x 1600 of the screen of my new...

  If so, what graphics card will recommend you?

  Kind regards
  Tobias Storm

  Hi mate

  Unfortunately, the graphics card is not editable in most cases, it welded s and he a part of the motherboard.
  But even you would be able to remove the chip on board additional parts like BIOS, etc. would not address the new chip.

  Good bye

• Qosmio G40 - 10F - extra hard drive

  Hello

  I have recently purchase a G40 thinking it was x 2 of physical drives, it appears in this model there is only a single physical HD

  I read in many places, there is room for the G40-10 for a reader to additional disk placed inside the machine but this model seems to have simply a fixed cover but the space for the reader to be mounted

  Nobody knows of the back plate is removed and an additional hard drive caddy to store additional drive - it should be relatively simple with a heat dissipation and other I think all that is needed is the replacement carriage and connector cable SATA - x motherboard 2 recognisies readers

  All I really want to know is

  (1) is it possible
  (2) is - someone doing it
  (3) toshiba reference numbers for the caddy and for a G40 - 10F sata cables

  Hello

  I have a Qosmio G30, but I saw G40 and if I remember, although in the lower corner, that there are two HARD drives covers. Two of them are placed close to the battery, and they have one, how to say, plastic circle. AFAIK the G40 is offered with one or two hard drives. The first HARD disk is placed inside fixed with a screw. One extra is placed under the second HARD drive cover fixed with two screws.

  I don't really know if your G40 is extensible, but you can contact the service provider authorized in your country. They have access to the database of Toshiba and they can check it for you. Part number is usually internal case and it is not easy to find number of exact part for these additional parts like the drive bracket HARD or cables.

  Make a call and pick up information on the possibility of upgrade HARD drive.
  One last thing: try to remove the cover for the second HARD drive and check if the HARD drive connector is there.

• I like to use 2nd HARD drive tray to add SSD drive

  Hello

  I like to use the 2nd HARD drive drawer in order to add an SSD.

  Are there additional parts required in order to set the new drive? If Yes, please mention the name and part number.

  Your
  Stephan

  What model of laptop do you have? What's second location of HARD disk available?

  What you need is the HARD disk enclosure. Something like this. It is not easy to know what part number, there, but you can contact the nearest Toshiba service provider and order the right one.