address bar in Windows explore does not accept changes (CLOSED)
My address bar stopped responding to paste... everything what I paste or type is quickly replaced by the address of previous folder
I tried to re-opening and closing the file. I also ran SFC. I use Windows XP SP3.
CLOSED: I used the SFC, REBOOT with SFC/REVERT... neither seems to help. Access to a network drive. That seems to fix the problem. COME ON MAN! How to start these little glitches.
Anyhoo... the problem seems to be fixed... for now (but what harm Pépin's hiding in the closet? :)
I suggest you to try the steps below and check if it helps.
You have probably read the two last sentences, but thanks for your suggestions.
Tags: Windows
Similar Questions
-
Windows Explorer does not work properly and hold all the time
I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.
Thank you for your time and enjoy your time.
.
Hello
Use the startup clean and other methods to try to determine the cause of and/or
eliminate problems.---------------------------------------------------------------
References to Vista also apply to Windows 7.
What antivirus/antispyware/security products do you have on the machine? Include
everything you've ALWAYS had on this machine, including those you have uninstalled (they
remains of leave behind which can cause strange problems).----------------------------------------------------
Follow these steps:
Try these to erase corruption and missing/damaged file system repair or replacement.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows
Vista or Windows 7
http://support.Microsoft.com/kb/929135Use advanced tools to solve performance problems in Windows 7
http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/Problems with the overall speed of the system and performance
http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything-
then right click on taskbar - task manager - take a look at stored by -
Process - Services - this is a quick reference (if you have a little box on)
Lower left - show for all users, then check that).How to change, add or remove startup programs in Windows 7
http://www.SevenForums.com/tutorials/1401-startup-programs-change.htmlIs a quick check to see who are loading method 2 - using MSCONFIG
then after a list of these here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what files, registry keys, and other objects
processes have open, which DLLs they have loaded and more. This unique
powerful utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically
When your system boots and you connect. Autoruns also shows you the complete list
locations of registry and files where applications can configure start automatic settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor file system, registry, process, thread and DLL
activity in real time.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are
loaded automatically when Windows starts. For each application, what follows
the information is displayed: Type of startup (registry/Startup folder), Command - Line
Channel file, the product name, Version, company name, location in the registry or
file system and more. It allows you to easily disable or remove unwanted programs
that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe
not. The window Watcher says it all, every window created by each execution of the statement
program, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Think about it an absolute must - manually update your drivers.
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded
on your system. For each driver in the list, additional useful information is
Poster: load address of the driver, description, version, product name,.
company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit Maker as replacements and system manufacturer of device which are
the most recent. Control Panel - write - graphics card - device manager
the brand and complete model of your video card - double click - tab of the driver-
Note the version information. Now click on UPdate Driver (this can do nothing
MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
This will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
If there are 3rd party with their own software and drivers and the other main device drivers
you have.Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
their latest versions. (Look for the system to update the BIOS, Chipset and software updates
Site of the manufacturer here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
REBOOT after each installation.Always check in the Device Manager - drivers tab to be sure the version you are
installation actually appears. This is because that some rollback of drivers before the
later is installed (particularly that audio drivers) so install a driver - reboot.
Make sure that it is installed and repeat if necessary.Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
SCANNER - check manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using
the above methods is preferable to ensure the latest drivers from the manufacturer of system
and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable driver facilities
in the updates of Windows, which leaves on Windows updates, but it will not be installed
pilots who are generally older and cause problems. If updates provides a new
driver then hide it (right click on it) and then go get new ones manually if
you want.Stop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
Professional, comprehensive and Enterprise edition)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/===========================================
Refer to these discussions because many more excellent advice however remember to check
your antivirus, the main drivers and BIOS update programs and also to solve problems
with the first method cleanboot.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone. iTunes sees it yet, but windows Explorer does not work. It seems that some setting has been broken through the update of ios. A way to solve this problem?
Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?
TT2
-
Hello, my computer is having a lot of problems, which started last night. Here are the things that are run:
-Windows Explorer does not respond
-Computer cannot disconnect correctly: down/restarts when I close the computer says "disconnect" for hours.
-Cannot use the system restore and may not even start from Safe Mode command prompt
-Safe mode does not load
-No applications work, apart from web browsers, and AVG.
-Cannot access the drivers, to make anything back.I added not all strange programs and I do not think it is malware, but I can't actually run my anti-malware program. My computer is running really hot, what he has always done and I keep it high and the fan not covered (I'm broke, can't afford a fix of the computer, or the new computer). Please talk is profane. I'm not all that techno. THANKS FOR ANY HELP!
The model is:
M8622 laptop Gateway
Vista Home Premium 32 BitSo I reinstalled everything, and even though it's a pain, my computer is normal again! Must have been a virus.
Thank you very much for your help!
-
Hello
As the title says after using my laptop without any previous problems, suddenly I can not connect on Windows Vista.
I'm 100% sure that the password has not been changed, caps lock, shift, caps lock Num etc is not active.
When I bought the laptop, Vista was already installed, so I don't have a recovery disk.
Any help would be appreciated.
Hello
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
This is the Information from Microsoft on the problems of passwords;
You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.
If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.
- Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
- Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
- Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
- Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.
Malware can also cause problems with passwords:
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If the above does not fix it:
Here are the different methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Windows Explorer does not open
Windows Explorer does not open when I go into My Documents it tell me that Windows Explorer has encountered a problem and needs to close. When I go to the report and do not understand but the basics are "error 0xc0000005" and "hpswp_bho.dll" also I can't open the control panel either. I just installed a new HP Photosmart printer all-in-one wireless.
Help, please
Concerning
Joan BuchananHi Joan57,
Hpswp_bho.dll
is a ColaBrowser.dll belonging to HP Smart Web Printing to Hewlett-Packard.You will need to uninstall it check if it works and if it works contact HP for more information.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Original title: Signature Collision?
I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.
Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision
Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).
I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.
Can anyone help?
Thank you
Comatose13Hello Comatose13,
There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.
http://support.Microsoft.com/kb/330140
Bobby
-
Don't click Desktop error "Windows explore does not work.
Original title: Do not click on the desktop.
My desktop computer has worked fine and now all of a sudden I am unable to click anywhere on the desktop. I am running windows 7 64 bit. If I click on the desktop, it will be then to come crash with the message Windows explores does not work then he'll recover. Other differences is that all desktop backgrounds are brighter and it disappears once it restarts, but returned about 5 seconds later. That I can not click once again. Are there any suggestions? I tried to start clean and had no success?
Hi Nicolas,.
I appreciate your efforts to solve the problem.
I suggest you try the procedure described in the article and see if it helps.
Error: Windows Explorer has stopped working
http://support.Microsoft.com/kb/2694911/en-usNote:
1) data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.2) after the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.
3) when you do the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.
4) note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How to install my versions?
Hi Tuulah6441378,
Photoshop 4 and 7 are very old versions, downloads for them are no longer available and the operating system you are using is the most recent, so there will be compatibility problems.
Adobe has not tested these applications on newer operating systems.
Please see, historical version of Adobe Photoshop - Wikipedia, the free encyclopedia
-
Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How can I manage my versions to download?
The download, it's what you do to get a file from a Web site to your computer... Installation is what you do to have the installation files to put a program on your computer and the link to your operating system... what you do... Download or install?
If you mean that Win10 will not allow you to INSTALL the program, read below
Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html
-In addition, only CURRENT products will be tested and updated for compatibility with Windows 10
- so if you have an older program, update you to Windows 10 at YOUR risk of problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-IF not, Details of the message from the error messages and a person may be able to help
An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others
- or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions... said FULL yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
"Windows Explorer does not ' and restart
Whenever I open any file with media player, the Explorer files to stop and displays the message "explore does not.
My system is windows 7 32-bit ultimate.
Need help solve the problem.
Thanks in advance.
Hello
Thanks for posting your query to the Microsoft forum. I will definitely help you with this.
This problem may be due to one of the following problems:
You are using an outdated or corrupted video driver
System files on your PC can be damaged or do not correspond with other files
You may have an infection of viruses or malware on your PC
Some applications or services that are running on your computer may be responsible for Windows Explorer to stop working
I would like to know;
- You did changes to the computer before this problem?
- You receive an error message/code?
I suggest to try the procedure described in the following Microsoft Support article and check if it helps.
Error: Windows Explorer has stopped working
Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.
Important note: Do NOT perform the steps to upgrade on site and system restore.
Also check out the link to improve PC performance:
Ways to improve the performance of your PC
Note: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive
Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.
____________________
Thank you best regards &,.
Isha Soni
-
Games for Windows Live does not accept the account and password
I have a "game for windows live. I gave the true account with the password information. But the system does not accept it. WHAT CAN I DO NOW?
Hello
In dealing with the problem with games for Windows Live, it would be preferable to this post in the Windows Live community.
Windows Live Solution Center: http://windowslivehelp.com/
Hope this information is useful.
-
Reinstall Windows 7 does not accept the product key
Just bought a new PC to replace my crashed. Install Windows 7 from the DVD I got for my old PC. It does not accept the product key. Think it's because it was a copy of Windows 7 upgrade. What can I do about this that I can't downgrade to Windows XP. I have the original and the product key for Windows XP disks.
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.
15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.
So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Windows 8 does not accept the product key
About 3 years ago I bought Windows 8 Pro (64-bit). In the meantime, I reinstalled the system a good several times because of some strange accidents (see my other question). Now, I tried to reinstall it again, until Windows 10 comes out, but activation does not accept the key. I read on other forums that this is probably beyond the limit of activations.
Is there a way to reset the key or am I forced to buy a second?
Thank you
Mario
Hello Mario,
Thanks for posting your question on the Microsoft community.
I would like to know some information about the problem so that we can help you better.
1. you made any hardware or software changes to the Surface before the show?
2. do you receive a code or a message when you say, 'activation does not accept the key?Thank you for details on the question and your efforts to resolve.
This problem may occur because corrupt Windows activation files or parameters.
I would suggest trying the following methods and check if it helps.
Method 1:
To activate the phone and check.
Refer to this article:
Get help from Microsoft Windows activation
https://support.Microsoft.com/en-us/KB/950929If this does not help, use method 2.
Method 2:
Please refer to the suggestions of nobody611 responded on 4 December 2012 and check the issue.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-activation-after-clean-install-does-not/01047349-516A-485f-b88d-68c1c9ac0e9cNote: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
http://support.Microsoft.com/kb/322756I hope this information helps.
Please let us know if you need more help.
Thank you
-
activation of Windows 8 does not accept my product key
Hello
I bought a new hard drive and after installing Windows 8, I try to activate with my product key, but it does not accept.I tried calling support and when I go through the automated process it asks installation identification numbers that I don't have.Please can someone help?
Thank youGrahamTry to talk to a live representative, you will need to do during the week:
1. press the Windows key + X , and then clickrun, and then type: slui.exe 4
2. then press the ENTER"" key.
3. Select your "country" in the list.
4. choose the option "activate phone".
5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
6. explain your problem clearly to the support person.
Maybe you are looking for
-
In android FF, how can I see just a short sublist of my favorites?
In android FF, how can I use keyword in bookmarks? (I can assign the keyword, but cannot use it.) How I see just a short sublist of my favorites?
-
Need new HDD for Satellite A110-178
Hello people, Anyone know where I can order/buy a new internal hard drive for my laptop cause my hard drive died. Greetz
-
Crysis stuck on black screen on Windows 7 Home Premium 64-bit
OK, for starters, I had Crysis installed on my system before but had to reinstall Windows and now nothing does, not even Fallout 3 GOTY Edition on my system, I have more then qualify for a game but I am still having problems.-------------------------
-
I want to reset my laptop to factory settings, but first of all, I want to know how not to remove my Microsoft Office license, because I used the last of them, and I'd rather not buy more. And also how to create a kind of discs of recovery or system
-
error missing cooltype.dll
Recently, I loaded an update to my Adobe flash player. Since that time when I try to run Adobe Standard 9, I get an error message the operation failed because the file cooltype.dll is missing. Since I have a desktop computer, I was able to grab a c