ADE 4.5.1 does not

Similar Questions

• Help! OUTPUT AUDIO BACK DECISION-MAKING DOES not!

  Hi, I have a problem with my AUDIO OUTPUT device. I use a M2N68 AM PLUS Asus MBord, all sounds drivers are updated and works OK. but my problem is that I don't hear anything from the speaker. Notification of speaker level icon is bouncing up and down and detect sound but not the speaker output. Another thing is that my DECISION-MAKING of OUTPUT AUDIO BACK not detect plugged or disconnected devices. My realtek on that HD Audio Manager of PANELS of OUTPUT REAR are blurred and only the FAÇADE are active that does not work as well. I hope someone can help. Thank you!

  Hello

  1. If it works well before?

  2 did you change on your computer before this problem?

  3. you receive an error message?

  You can try these steps and see if it works very well.

  Step 1

  I would like to you can check if the rear speakers are disabled and the volume level is fine.  To do this, follow the steps below.

  1. Click on start.
  2. Click on Control Panel and click on sound.
  3. Playback tab, click speakers and click Properties.
  4. Click the levels tab and check if the back entrance is set to mute and uncheck the box.
  5. Select the level to 100% and check if the speaker rear works fine.

  Also, you can try disabling the improvements and check if it helps.

  To turn off the improvements:

  1. access Control Panel

  2. click on its

  3. Select the play tab

  4. Select entry speakers/headphones

  5. click on Properties

  6. Select the tab improvements

  7. disable all improvements

  Step 2

  Try to perform a system restore and see if it works very well

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Step 3

  If the steps above don't you may need to contact the manufacturer of the computer to verify that the equipment works very well and has to be replaced or the motherboard

  It may be useful

  Concerning

• Server does not support remote façade panels

  Hello.  Hope someone has an idea about that.  After the computer host and update cDAQ 9139 LabView SP1 from 2013 to 2014 LabView dev suite shipped by NOR, I get the error "server does not support the remote panels" when you try to view my remote panel.  Before the update it worked normally.

  I went through everything in the list in this document, http://digital.ni.com/public.nsf/allkb/C23EF1551D8C52ED86256B140073EE2E and can't find anything that will solve the problem.

  I have rebuilt the application in 2014 of LabView (I even tried a new simple project with a single loop, one of the temperatures and a remote control), rebuilt the build spec and get the same error.

  "I've re-edited the web page and checked in the html code it refers"CODEBASE ="ftp://ftp.ni.com/support/labview/runtime/windows/2014/LVRTE2014min.exe" and I have, according to MAX, LabView DURATION 14.0.1 installed on the host machine.

  If something has changed related LabView 2014 which would cause a new firewall as this remote façade program worked great with 2013 installed?  I've already added that LabVIEW 2014 and all other related apps through the firewall, including the web server.  I am also on a machine that doesn't have a Bluecoat, our company network/internet security suite is installed.

  Thank you

  Michael

  Another possible solution to this problem - operator error.

  See one of my other posts here for details, but I made an assumption about the port numbers and what they apply to.  Two key points - the port of the web server application in the configuration of hardware web page is not the port used to access the remote panel - port is assigned in the properties of the device, the server settings remote control panel in the project.  And they cannot use the same port; This will also lead to the error "server does not support the remote panels.

  Note to the NOR - you must add this to your KB document on the resolution of this error.

  Thank you!

• kb2596615 causes ade to failure, error was 459: object or class does not support the set of events

  A couple of my users started getting our application error messages ade grown after you apply this update. Everything is well after its withdrawal. First mistake was 459: object or class does not support the set of events. Basically, no event has worked. Why is this update break my application? It should be removed from the queue of the update.

  Okay, I've worked on it with Microsoft, and the actual cause turns out to be:

  MS12-060 security update affects the functionality of Access database
  http://support.Microsoft.com/kb/2748410

  This article updated fingers MS12-060, specifically KB 2687441, as the culprit.

  It turned out that ActiveX controls on the form (specifically the Microsoft Common Controls 6.0 Toolbar), caused the failure.

  The solution was simple: on a patched machine, open each form with an ActiveX control in design mode, compile and save it. It worked for me. Ignore the details of the solution that I wrote in the previous post!

  You may need to resave MSCOMCTL. OCX, as suggested in the article, to get your databases to work.

  -Ken

• ADE does not

  whenever I click on my Kobo reader under devices my ADE even answer, then closes.   Also recently when I download a book from the library, I get the message there download but the book does not appear in my window ADE.   I have tried to uninstall, reboot then install ADE new but nothing has changed.   And yes I've updated for Windows 10

  Try this: http://windows.microsoft.com/en-US/windows/create-user-account#create-user-account=windows-10

  Open Digital Edition under the new user, download an eBook and try to move to your player.

• Why does not open ADE 4.5 in Windows 10?

  When I click on the desktop icon, I get a cursor for a few seconds, but no window ADE appears.  I checked the Task Manager and no application ADE is active.  I uninstalled and reinstalled ADE several times and get the same result.  I have an ASUS transformer CHI T100 computer with operating system Windows 10.  Before I upgraded to win 8-10, I could open ADE and activate it.  So maybe that's why I get no error windows.  Other that the cursor occupied at all nothing happens when I try to run ADE.

  Any ideas?  I use ADE mainly to transfer eBooks from my computer to my Nook reader.

  Dvolonte

  If this does not work, try to create a new user local admin and start the digital edition with that create a local user account in Windows 10 - Windows - help

• When I install Adobe Digital Editions v 4.5 to 8.1 win does not offer to migrate from the ADE 3 library. It does on Win 7 & 8 Win

  I've successfully upgraded ADE on 2 computers but on the 3rd, the library does not migrate & ADE 3 is not uninstalled.

  Normal Digital Edition used the same folder and you get display eBooks, but sometimes does not work.

• My corner Simple touch does not appear in ADE (Mac)

  Hello

  I currently have a Nook Touch Simple (version 1.2.1 of the software).  When I connect it to my MacBook Air (Version 10.9.3) it does not appear in ADE (3.0), which is in turn allows me to transfer books. Suggestions for out of boredom is greatly appreciated.    I have attached a screenshot.

  

  Discovered that I had a bum cable that loads but did not connect with my computer

• ADE does not detect torchlight Nook

  ADE 1.7 did not detect my new Nook (it appears as a drive on the computer very well), so after playing a while with no luck, I installed 2.0.1 but which does not recognize it either.  Both version recognize my old original Nook very well, while 1.7 has been 'frozen' for several months when you try to transfer books to computer in the corner.

  Really irritating for you.

  It might be interesting to try a factory reset of the Nook.

  Backup books you have on it (probably no as it is new) first.

• ADE does not recognize the Samsung Galaxy Tab 10.1

  I have Adobe Digital Editions on my computer and have been able to load books from my library on my corner and the nookcolor.  I recently bought the Samsung Galaxy Tab 10.1 and attempted to load a book that I just got from the library on ADE but ADE does not recognize the Galaxy Tab as a device.  It does not at all appear in the library.  I checked the files tab as recommended by another post on this site.  The Adobe Digital Editions file is not on the tab.

  I would have given you a little more in detail.  Sorry - who knows?

  I do not have a Galaxy, but I 'assume' that he has some installation instructions

  that came with it, and one of those is to go online to Samsung and register

  the device with them.  Implementation of applications will be a part of this process.

  The ebook app connects you to the Google Bookstore, where you'll probably

  must create an account with a user ID and password.  A small file will be

  put it on the shelf with this information, which ADE will use in interface

  with your tablet.

  I do not have a Galaxy, but when I went through this process with SONY, to

  one time they asked me if I wanted SONY to handle epub files and I

  said no, because I had to use ADE.  You may be faced with the same

  with Google - or not.  I think that the reason why they asked, was that they wanted

  set up an exclusive link with my ereader, which would have kept me

  their ebookstore for all my downloads.

  I hope this helps!

  ===========

• I am going to erase the authorization of the computer on ADE 4.5 with Win 10.  It says that the password is incorrect.  I changed the password of Adobe, but it does not recognize.

  Anyone have ideas on how to do to erase approval when the password is not recognized?

  Thank you.  Following your suggestion and look what it meant in Win 10 I could find this:

  If the process of exercise it does not work, try this:

  Click Start > run

  Type regedit and press enter

  Look for the registry key on the left panel

  HKEY_CURRENT_USER\software\Adobe\Adept

  Select the key Adept

  Choose file > export

  Enter the name and location to save the registry key, click Save

  Key follower of right click and delete

  To confirm, click OK

  Close the registry

  Open Adobe Digital Editions and reauthorize

• Satellite A100-383 does not - the battery is not

  Hi all

  I own a satellite A100-383 (PSAARE) that does not start when the battery is totally empty, or if I leave without the battery of the day to the next. The battery will charge not façade is and all the lights are off. I should always have a load on my battery and don't let not unplugged more than 2 days.

  If for some reason, my battery was completely empty, Plug and unplug the power supply from the wall outlet would make all the lights increase and charge the battery again.

  Unfortunately, I went on vacation and I forgot my pc unplugged and it does not charge or turn on. ? The headlights are off. Tried my dear old method to connect the unit several times with battery and without it with no luck... I could see a connection for a second or two, but I wasn't fast enough to plug in and they are off.

  I would be so grateful to you all if you give me a help to put it on my pc. Once I have it on the load and back I'll buy a new battery for sure.

  I look forward to reading your advice.

  Thank you all in advance!

  Post edited by: Soneu
  The battery will charge not façade is and all the lights are off, when the battery is completely empty.

  Post edited by: Soneu
  Running Windows 7 32

  Thanks for the comments. I just want to say that you should buy high quality and Toshiba of origin of the product and not a cheap no. product name.

  Good luck.

• Satellite A305-S6825: Volume control does not stop right or left

  We recently bought the Toshiba: Satellite A305-S6825 and note that the Volume on the front panel control seems to turn left and right, but does not seem to stop.

  I thought that a few twists to the right/left, he'd stop, but no.

  Everyone is the same thin experience?

  > Control volume on the façade seems to turn left and right, but does not seem to stop.

  Don t worry buddy ;) is not a fault or a bad hardware work it s a feature!

  I have the A210 and properties of volume control. I can turn right and left without stops

  Greetings

• Security on the front panel does not work

  Hello

  I have a problem and a question:

  Problem: I created some controls on the front panel and some groups which they are responsible. Administrators can see and do everything, the operator cannot see some of them. If I build exe it works on development PC but if I copy them to another PC, it does not. It does not show these elements of façade. Areas are the same, SCADA, only the names of PC are different. The two computers are not in the same network. I create local domains and users on two computers through domain account manager. What could be the problem?

  Question: How can I create an access control list (ACL) and assign them to the elements of façade programmaticaly? What is the syntax? I have found no examples of code.

  Thank you.

  I found the solution. Maybe someone also needs:

  You must copy the folder C:\Program Files (x 86) \National Instruments\Shared\Domain development pc to other PC, in which you want to have the same field and same users. It does not have to generate the new domain with exactly the same name on another pc and generate new users. You must copy the whole directory of your pc to the other pc. It works now.

• My PCI-6250 does not see my SCXI box

  Hello

  I want to install a station using a PCI-6250 connected to an SCXI chassis cable 68 pin.  We have a couple of these formations, so they gave me a Setup disk that have our configuration is already done.  However, I had to install a software, that they neglected to give me.  I got the latest driver for the latter of NOR.   Well, maximum running, my tree is distinguished by a previous configuration.  And mine is not communicating with the SCXI.  My cards are "x" ed out.  The Communicator 'chassis' in the SCXI chassis Configuration is grey (no options).  I checked the wiring and disconnected all the blocks for the cards.

  Here is my tree.

  NOTE: Mine also does not have the "NOR-DAQmx devices" under the heading "devices and Interfaces, only in the software section.  Other configurations have this list.  I don't know how to get "devices OR-DAQmx" shown.

  Any help would be appreciated.

  My system

  • District data
  • Devices and Interfaces
    • GPIB0 (GPIB-USB-HS)
    • Network devices
    • OR PCI-5402 'Dev1 '.
    • OR PCI-6250 "Dev2.
    • OR SCXI-1001 "SC1".
      • 1: OR SCXI-1125 'SC1Mod1 '.
      • 3: OR SCXI-1124 'SC1Mod3 '.
      • 4: OR SCXI-1160 'SC1Mod4 '.
      • 5: OR SCXI-1163R 'SC1Mod5 '.
      • 6: OR SCXI-1163R 'SC1Mod6 '.
    • (Unidentified) PXI system
    • Series & parallel
      • COM1
      • COM2
      • Com7
      • COM8
      • COM9
      • COM10
      • LPT1
      • LPT1.4
  • Scales
  • Software
    • IVI Compliance Package 4.0
    • LabVIEW Run-Time 2009
    • LabVIEW Run-Time 8.0.1
    • LabVIEW 8.2.1 Run-Time
    • LabVIEW 8.5.1 Run-Time
    • LabVIEW 8.6.1 Run-Time
    • LabVIEW SignalExpress 2009
    • LabWindows/CVI Run-Time 9.0
    • Measurement & Automation Explorer 4.6.2
    • Measurement Studio for VS2005
      • DotNET
  • Commune
• Editor Script OR 1.3.1
• NEITHER Spy 2.7
• NOR-488. 2 2.73
• NOR-DAQmx ADE support 9.0.2
• NOR-DAQmx Device Driver 9.0.2
• NOR-DAQmx MAX Configuration 9.0.2
• NOR-FGEN 2.5.1
  • FGEN Soft Front Panel
• NOR-HWS 1.4.5
• NOR-PAL 2.5.2
• NOR-TClk 1.6.1
• NOR-USI 1.0.2
• NI-VISA 4.6
  • NiVisaServer.exe
  • NIvisaic.exe
• Duration of NI-VISA 4.6
• NOR-DAQ traditional 7.4.4
• IVI drivers
  • Advanced
    • Instrument Driver software modules
    • Simulation software driver modules
    • Pilot simulation sessions
  • Pilot sessions
  • Logical names

Hi mz6yx6,

First of all, don't worry about trying to get to the ' devices OR-DAQmx "appear. 4.6 Max, which was first included with NOR-DAQmx 9.0, has a revised UI layout which displays the devices inside "Devices and Interfaces" rather than display them in subfolders like ' devices OR-DAQmx.

Also, thank you for the view a report of the configuration of the system MAX. The report shows that the SCXI chassis and modules are configured as simulated devices, which I think is the problem. DAQmx (> = 8.7) does not support configurations where a simulated SCXI chassis and modules are connected to a real communication hardware DAQ. Since your system has not simulated hardware DAQ (except the SCXI chassis and modules), the "Châssis Communicator" menu has no options to display.

To resolve this issue, remove the SCXI chassis in MAX and create a real one (not simulated). How to do this depends on if you manually configure the chassis or you import a configuration from a file .nce, .ini or .txt:

• Manual: right click on "Devices and Interfaces", then select «Create a new...» ». In the window "new...". "which appears, open the ' Chassis SCXI of NOR-DAQmx ' subtree and select the chassis type from there. Do not select "Simules NOR-DAQmx device" or modular Instrument The modules must be detected automatically, but you will need to manually reconfigure the accessories.
• Import from a file .nce, .ini or .txt: in the dialog box 'Assistant Import Configuration', check that the 'Warnings and conflicts' column displays "XYZ will be replaced" or "Create device" and does not "create a simulated device.
• If the Setup disk makes the SCXI configuration programmatically or an installer for the application, then more information about what is on the Setup disk would be useful.

Brad