Satellite A305-S6825: Volume control does not stop right or left

Similar Questions

• My speakers stopped working suddenly. the message I get is good card can be used, but the volume control does not appear and when I go into sounds and devices, everything is gray.

  My speakers suddenly stopped working. I went to audio and I received a message sound card may be in use. The volume control does not appear atr from the bottom of the screen and when I go into properties, everything is gray.

  Hi BarbaraEvanchik,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  How to troubleshoot sound problems in Windows XP

  For reference: no sound in Windows

• Microsoft LifeChat LX-3000 inline volume controls does not not on Windows 7

  I just bought a Microsoft LifeChat LX-3000 headset, install the LifeChat 1.4 software. The headphones and the microphone are functioning normally, also the command buttons to perform a call and mute, but the buttons for the volume control do not work. I checked the HID services and they are running, also reinstalled the software and drivers but these buttons do not work.

  I use Windows 7 Enterprise (64-bit) on a Dell Studio 15 laptop.
  Thanks in advance for your help.

  Hello

   
  1. it worked before?
  2 have you made any changes to the computer before the show?
  Method 1:
   
  I suggest you to connect to another computer and check with the question.
  If the problem persists after you connect to another computer. I suggest you contact the hardware support for assistance:
  Microsoft Hardware
  http://www.Microsoft.com/hardware/en-us/p/LifeChat-LX-1000#support
   
  Method 2: run the hardware troubleshooter and see if it helps.
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
   
  
  Also check out the links:
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
  Troubleshooting: headsets
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/headset/hardware-issues
   
  I hope this helps.

• FN keys and volume control does not not on Satellite A210-131

  Hello
  I have a Satellite A210-131 for 3 days now, and the FN keys do not work. The numeric keypad using FN works fine, just the F1-12 combined with FN do nothing. I have the latest drivers and utilities from the website...

  In addition, my touch volume control works quite stupid, it takes less than 20 seconds to set and then its way too hard... I always have to go to the sound control menu to change...
  Help, please!

  Hello

  It's very strange. Usually, if you press the FN key and keep down flash cards must be indicated at the top of the screen. Please try to restart flash cards: start > all programs > TOSHIBA > utilities > restart Flash Cards.

  I don't know what the problem with the touchpad and the control volume but friends Satellite X 200 (the same tablet like on your A200) works well. Problem described is quite strange, and to be honest, I don't know.

• By Satellite L300-147-manual volume control does not

  The manual on the laptop volume control no longer works. If I try to adjust the volume (on the right of the headphone plug-ins) - I just keep scrolling. So, I can only watch DVDs on a really low level. I adjusted the volume under 'control panel' control to the maximum level.

  Any ideas to fix this please?

  Never heard talk about it but it makes sense with the installation of the Package of added value.

  It's really strange question, and it will be interesting to know if this helped. Please post the results.

• Satellite L300-22R - fan control does not work on Ubuntu

  Hello together,

  I have a problem with my Satellite L300-22R model PSLB8E-0QL028GR (Ubuntu 8.10) and the fan control. At first the fan does not work. After a few minutes, the fan operates at 100% until the laptop is turned off. I think it's a problem with acpi.

  The BIOSis: InsydeH20, worm. 1.60. There is not a more recent.

  Thank you for your support.

  Hello

  Is this laptop model is not supported for Linux and everything you find on the Toshiba download page (updates to the BIOS) is for the use of Windows XP Home/Vista edition only. :(

• Satellite Pro P100: remote control does not not-> error ' cannot be read handle. ".

  Hello

  My Satellite Pro P100 began to show the error "Failed to read handle." at startup. I found a related post and removed from the area of registry Toshibarc.exe control startup programs. This does not prevent the pop-up dialog box, but now my remote does not work.

  Does anyone know if toshibarc.exe must run for the remote control work? And if so, how do I fix the error in the program (rather than simply removing from the register). Could this be a hardware problem?

  If I try to manually run the C:\WINDOWS\SMSC\CIRHID\V1_0_0000_0\toshibarc.exe, I get the same popup "Impossible to get read handle.".

  Thanks for any help or ideas
  Steve

  After a long period of investigation in the internet and visit many Web sites, I discovered that the ToshibaRC.exe file belongs to the Remote Application from Toshiba. It seems that the file is required to use the remote on the laptop...
  But I can't give you a reason why it causes an error.

  I found this similar thread in the forum
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=16959

• HP slate 7 volume control does not

  Volume control stopped working a few days ago.  She slips back on the screen and volume button forces to do the same.  The volume never changes.

  Hello and welcome to the HP support community!

  Have you tried to reboot the device?

  You see a headphones icon in the corner?  Try to insert and remove a headphone jack.

  Does the device he uses a Bluetooth audio device?  Turn BlueTooth off, restart the device, and then try again.

  WyreNut

• Satellite M40X - CD/DVD control does not

  I've had my laptop a few months back and the controls have not worked since I got it. Is it a software problem that I can fix it, or something else? I tried to update the software for him, but he did nothing. I have an extra monitor currently connected, does it affect it at all, because it seems to prevent the standalone DVD player work when it is connected.

  PS. any way to get the controls to work for iTunes?
  Thank you

  Hello scot

  If I remember right on your unit is pre-installed Express Media Player. This drive is installed on the small hidden partition and you can use it without booting the operating system. I'm sure that these buttons can be used only with her. Please test.

  The same Satellite M40 a and I know that everything is described in s operating manuals. I'm not 100% sure but I think there is no chance to use with external devices.

  Good bye

• The volume control does not work on my Tecra A9

  Hi all

  I just be reformatted my laptop and put all the drivers and have a slight problem my on the front volume control not working anymore.
  How to operate?
  Also when I go to Toshiba Assist on doctor connectivity the bluetoooth does not come to the top. How can I get this back up?

  Thanks Pob

  Hello

  Have you installed the operating system using the Toshiba Recovery disk?
  If not; do you have what OS installed?

  It is Win XP?
  If yes you must first reinstall the common Modules then the commands and utilities

• Communication satellite U500 wifi switch control does not work

  Hello

  I have problem after update of the operating system from Vista 64 bit to win7 64-bit. The problem is in the wireless communication switch command before notebok. When I was with win vista, it works fine, post off - wifi off and post-wifi on (without restarting). But when I updated to win7 and install all the drivers of toshiba upgrade dvd, my wifi switch works as follows:

  When I turn on notebook with wifi off button - its turned off all the time and the wifi does not work and fn + F8 (shortcut key for wifi) does not work too. I have to restart the PC with wifi switch in position-the wifi works fine and fn + F8 is able to turn on and turn off the wifi. But that put the material do not react to pass and - diode LED is always on (in case when I start the pc with position control on and in the case where is when off wifi LED is not clear and switching does not work).

  I've updated wifi realtek drivers but still it does not work. IAM verry sorry for my English. I was looking into Toshiba diagnostic tool and there is no modem device, but yes, wifi is perhaps problem here?

  Thank you very much for the reply. Tom

  Hello

  Different Satellite U500 (and other models) supports various wireless network cards, and that's why you'll find also different WLan card drivers.

  Your U500 seems to be equipped with an Intel Wlan card and here you can also download the right Intel Wlan card driver for this card:
  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• HP wireless keyboard from 2.4 GHz on the HP Pavilion Elite 083 Volume controls does not not in Windows 8

  I have a HP 2.4 GHz wireless keyboard on a desktop HP Pavilion Elite 083 UK:

  Model KG-08510 rev 1.1

  Product #ABU KZ256AA number

  Part number 505143-031

  .. Since the upgrade to Windows 8 Pro to Windows 7 Home Premium, I have problems with getting control of Volume +, - and disable keys on the keyboard to work reliably in Windows 8 Pro.

  In summary, the symptom is that when I start the PC from a start-up to cold which is a full power down of the State of the volume on the keyboard controls do not work.

  However, if I unplug and re - plug the USB wireless receiver that came the keyboard on the PC then on the keyboard volume controls begin to work again.

  I tried the following things to try to solve this problem:

  -Made a lot of new installation of Windows 8 i.e. reformatting the hard drive (no recovery) and fresh install Windows 8 on a blank hard drive.

  -Installation of Microsoft Windows all the updates available for the machine.

  -Manually install drivers wireless keyboard on the site of HP driver for my computer HP Pavilion Elite 083uk (this allows the screen display on to CapsLock and numlock which works reliably every time that I start).

  -Disable 'fast start up' in Windows 8 power settings

  -Using different USB ports on the back of the machine

  This question is re-producable each time and the keyboard volume buttons work fine even from boot cold when I was running Windows 7.

  I think that I have now found a solution / workaround to solve this case no matter who is interested.

  1. download and install the Microsoft "DevCon" tool that provides an interface to command line for Device Manager.

  Download and installation instructions are here:

  http://social.technet.Microsoft.com/wiki/contents/articles/182.how-to-obtain-the-current-version-of-device-console-utility-DevCon-exe.aspx

  2. create a Windows scheduled task with "highest privileges" that works on logon that issues the following command:

  DevCon restart 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  This restarts "HID-compliant consumer control device" that is listed in my device manager which is middle for the proper functioning of the volume control and mute buttons on the keyboard (keyboard functionality is via a separate driver which is not affected).

  NB. you need to replace ""HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02"with whatever hardware ID is listed in the device for that Manager.»

  3. If the above does not work, then you must create a scheduled task to run a batch file with the following:

  DevCon disable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

  DevCon enable 'HID\VID_03F0 & PID_0862 & REV_0105 & MI_01 & Col02'

• Volume control does not appear on the screen when I try to activate it. This has never been a problem until now. How can I get this working again?

  The volume control is located at the bottom right of my sidebar it me has not given any problems so far. Now, he just will not appear on the screen when I try to call. This has never been a problem before. I really did something to screw things up (again!) today. This is the first time I had this problem.

  Next time please indicate what opersting system you first use before describe you your problem.

  You can start by doing a system restore. Choose a date on which your Volume icon in the taskbar.
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  If for some reason it does not restore the Volume icon, then...

  For Vista, use this tutorial:

  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  You can try a method first. If the Volume box is grayed out (is usually), go to method 3.

  2. for the Volume icon

  To activate the Volume - icon Enable_Volume.reg< click="" to="">
  Then, follow the instructions from #5 to #9.
  Make sure that you restart the computer to complete the process.

  For Windows 7, use this tutorial:
  http://www.SevenForums.com/tutorials/19085-system-icons-enable-disable.html

  Go directly to the Option two

  9. to activate the Volume icon

  (A) click on the download button below to download the file below.

  Enable_Volume_Notification_Icon.reg

  then follow the instructions from #11 to #15.

  Make sure that you restart the computer to complete the process.

• Resolve hotkeys or volume control does not not on Microsoft Multimedia Keyboard.

  Was working OK until I upgraded to the latest version of Intellipoint V8 & Type Pro 8.2. Now the works of control Volume and other keys do not work, but not both at the same time. Can switch between the work of group by restarting HID (Human Interface Service). Have tried all ID of the MS Article: 932875 but no result. I did everything right by uninstalling the old version first. Frustrating

  Hello

  Have you checked if the keyboard works fine on another computer?
  
  Method 1:
  You can make sure that the key to the shortcut key sequence is correct.
  a. open Control Panel > language and region.
  b. click on change keyboard settings > advanced keyboards.
  c. check the keysequence. You can also click on the sequence of modifier keys and choose the keystrokes you want.
  d. click OK and check.
  
  Method 2:
  Amy connect you the keyboard to a different USB port and check the behavior of the keyboard.

  Method 3:
  If the problem persists, you can check with a new user account because this can happen due to the damaged user account

  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
  Note: If the problem does not occur after you create a new user account, and then follow the steps in the following article to fix the damaged user account.
  Fix a corrupted user profile:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Windows Media Player volume control does not work during DVD playback.

  When I play a DVD in Windows Media Player or Windows Media Center I can't adjust the volume with the volume control of the program or main Windows volume control.  Simply sound 100% flight.  It's on a HTPC connected to an A / V recevier, so the only way to adjust the sound with the volume of the receiver control.  When I play any other type of multimedia (avi, mp3, etc.) in the two WMP or WMC in the program volume control is working properly.  The interesting part is, when I play a DVD using VLC Player or Cyberlink Power DVD the volume setting in the program as well as the main Windows volume control works correctly.  This leads me to believe it's a software is not a hardware problem.  I think that WMP and WMC using the same "engine" so the same problem knocking them both.

  Other info:

  Windows 7 64-bit.

  Windows Media Player 12 version

  Audio is routed to the receiver via the digital coaxial

  For what it's worth, this same problem occurred with the same exact material when I'm running Vista 32 bit.

  All other software is the latest version with all updates installed.

  Any ideas are welcomed and appreciated.  Thank you in advance.

  -Michael P.

  Hello

  Reinstall the WMP and WMC application and see if it works very well.

  1. open the Control Panel -> programs and features.

  2. click on Windows to enable or disable features in the left pane.

  3 expand the multimedia features, disable Windows Media Player. Click Yes to continue, and then click OK to exit. Then restart.

  Note: If you turn off your WMP, Windows Media Center will be off either. You may need to reconfigure the settings for Windows Media Center after her reactivation.

  4. open or turn off Windows features turn on again. Functionality in Windows Media Player and Windows Media Center. Turn it back on.

  5. launch Windows Media Player, initialize the program.

  PS: If you turn off your WMP, Windows Media Center will be off either. This does not happen when we choose to turn off MCE.

  $C

  God will not look you over for medals, but for scars. Each winner has scars; I do this either on the same heart