ADF is not locate the af: inputDate in French
Hey guys,.I have a < af:inputDate / > and the value is displayed on the screen is not localized in French. It's quite strange because the error pop up when I enter an incorrect date is located.
Erreur: Le format de la date est incorrect.
Entrez une date avec le même format que l''exemple suivant : Sunday, November 29, 1998
As you can see, the error message is localized, but is not the suggested date.Anyone have any ideas?
Hello
You could have a local formatting in your Trinity - config.xml that messes it upward.
Kind regards
~ Simon
Tags: Java
Similar Questions
-
I am running Windows XP SP3, I can't uninstall the old java version 6 update 29, I get a "error code 1606: could not locate the directory... fatal error" How can I remove the old version of java? I tried to uninstall regedit.exe, javaRa and windows unsuccessfully capability. I uninstalled java, deleted the program file, but the version 6 29 poster update still in the program directory. Help, please!
original title: uninstall older versions of JavaHelloMethod 1:Check out the link and follow the steps.After uninstalling Java, how to remove its entry in the windows?Method 2:See the article and follow the steps.Error message when you install a program: "Error 1606. Could not access thenetwork location. "All the users\ directory ' Method 3:Check out the link and follow the steps.
Download errors: 1305, 2755, 1606, etc..
http://www.Java.com/en/download/help/error_installshield.XMLImportant This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows -
Here's the situation.
First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.
Here are the solutions I tried, in and out of safe mode:
While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.
In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.
It Startin via msconfig did not work.
Tried to go through Device Manager, which is completely empty for some reason any.
System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.
I knew, but there may be malware, mutiple scans with several services did not find anything.
I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?
Hello
Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.
I would like to ask you:
- You are running Windows 7 or Windows 10 on your PC?
- When was the last time it was working fine? Remember to make changes to the computer before this problem?
Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:
- Open the start menu and type "cmd".
- Right-click on the command prompt and click "run as administrator".
- Type the following commands and press ENTER after each.
DISM.exe / Online/Cleanup-image /Scanhealth
DISM.exe / Online/Cleanup-image /Restorehealth
After you run these commands, restart the system and check.
You can also view,
Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness
https://support.Microsoft.com/en-us/KB/947821
If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.
Refer,
Hope this information was useful.
-
ASA-6-110003: routing could not locate the next hop
Hello
I have a problem with our ASA firewall. I have a firewall that's inside, outside and DMZ interface. I have VPN clients that connect correctly and can access the internal network. However, for profiles that I have configured to connect via VPN to the DMZ network fails with the following messages.
ASA-6-110003: routing could not locate the next hop
&
ASA-6-302014: disassembly of the TCP connection... No contiguity valid
I have connections in the DMZ, but aren't VPN via internal and external interfaces without problem.
The routing table has a route to this network and I have a nat in place - I'm quite puzzled by the present.
Thank you
Ed
Hello Ed,
Well, Nat seems good but you can do the following for me please:
network of the DMZ_subnet object
10.1.213.0 subnet 255.255.255.0
network of the VPN_Subnet object
subnet 255.255.x.x x.x.x.x
public static DMZ_subnet DMZ_subnet destination NAT source (dmz - 2 outside) public static VPN_Subnet VPN_Subnet
Kind regards
Julio
-
Could not locate the agent.exe ODS.
In recent weeks, when my computer starts up, I get a message that says ODS agent.exe impossible to locate the component dnssd, dll not found - need to re - install. I don't remember to remove whatever it is and wonder if this is a serious problem and how can I fix it? I use Windows XP Home Edition II.
Thanks for your help. Elizabeth
E-mail address is removed from the privacy *.
If you mean that you see a message like this:
ODSAgent.exe - Unable to locate component
This application has failed to start because c:\windows\system32\dnssd.dll was not found. Reinstalling the application may fix this message.ODSAgent belong to some software from Apple that allows remote DVD and CD disc sharing, restoration of system software and a migration wireless with MacBook Air.
If you have not deleted the file, he could have been quarantined (actually deleted) by your unspecified antivirus/antimalware software.
Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
If you use this Apple software and features, you can see if the uninstall and reinstall the application by downloading it from the Apple page:
http://support.Apple.com/kb/DL112
You might be able to get by with only replace the missing c:\windows\system32\dnssd.dll file that you can download on my SkyDrive, but there could be other files that are missing too so a relocation may be required if you use this software.
If you do not use this software, you can uninstall it or disable the ODSAgent Service, so it does not start when you restart your system.
Note that the 'experts' Support who are engaged by Microsoft engineer will say just to try running sfc/scannow and check if it helps (to help any) or run msconfig and disable the Service and that you will keep seeing the message, but that is not the problem - it fixes the symptom of a problem which is not the same thing that actually solve the problem (however counts as a 'response' on) their planet).
Maybe it's fine if you use not just software, but you will leave with a sloppy XP configuration.If you do not know the software and do not use it, just uninstall it from Add/Remove Programs, and that should remove afflicted startup ODSAgent as well.
To download the c:\windows\system32\dnssd.dll on my SkyDrive, follow these steps:
I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).
You can download it and when you do, put a copy of the file in this folder (assuming that Windows is installed on your C drive):
c:\Windows\System32
Here is the link to my SkyDrive and you can get the file you need here:
https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311
When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.
When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.
You can download the file without the extension, and then rename the file to add the appropriate extension. You do not want to use a file called dnssd when the name of the file should really be called c:\windows\system32\dnssd.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.
Restart and look at things, to remember that you will have to perhaps download and reinstall this app from Apple, if other files are missing.
-
Update of security hung up during installation. I waited 12 hours for the update complete and nothing happened. Whe I reboot XP P4 syster, I get the Message from messageError: Winlogon.Exe could not locate component. This Application did not start because Comctl32.Dll was not found.
Re-installed SP3... Installed hard drive then... cloned old drive and new drive... After several updates, it seems to do very well. Tried several programs/operations and seems normal. One day turned but didn't have to build another system or this one back up. Thanks for the idea. F
-
Could not locate the wininet.dll component and needs to be reinstalled again
Original title: my computer won't let me it says needs demand winnetexdll how can I reinstall it if I can't get on the computer
It says unable to locate the component the wininet.dll file did not need to reinstall it again, but it will not open how doi reinstall
Hi miriamtorres,Scanning of auditor of system (CFS) files on your computer and check if it helps fix the problem.
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
Check out this link to do the same thing:
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
Additional reference on:
-
LaserJet m276n mfp 200pro: ADF scanning not scanning the whole page
I'm trying to scan documents using the car charger, but only about 2/3 of the width and 2/3 of the length of each page are analyzed. I am scanning through the scanning on windows 10 application and selecting the option auto charger. I tried selecting the scan to the all-in-one computer option rom device but given that we first installed the device last year it was still frozen and analyzed by this method. Scanning from the tray works fine and it scan the entire page.
Hi @Peter1960,
Welcome to the HP Forums!
I understand that your automatic charger on your mfp HP Laserjet 200pro m276n does not scan the entire page. I'm happy to help you!
What is the type/size of paper that you use for scanning in the ADF?
In the meantime, please try our program printing HP and doctor Scan and let me know the results!
If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!
Hope this helps, and hope to hear from you soon!
-
Could not locate the trash on laptop
I sent many fake pictures and files in the trash. I tried to recover a file deleted last night and could not find the Recycle Bin on my laptop. Usually, on my previous dell computers, it's a shortcut icon, not on this one! Can someone help me locate it? Thank you
Right-click on the desktop
Select Customize
In the left pane, select the Change desktop icons
Select Trash Microsoft Security MVP, 2004-2009 -
COULD NOT LOCATE THE DEFINITION OF UNEMPLOYMENT INSURANCE FILE
WHEN I TURN ON MY COMPUTER AND IT BOOTS UP TO WINDOWS VISTA A POP COMES UP SAYING UNABLE TO LOCATE THE U I DEFINITION OF THE FILE THEN YOU CAN PRESS OK AND IT GOES AWAY. HOW CAN I FIX IT
Hello
Please no type is all uppercase because it is difficult to read and regarded as yelling.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------------
If necessary:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
a small box in the lower-left - show for all users can check only).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
they loaded and much more. This exceptionally effective utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
The command - line String, product name, file Version, company name, location in the registry or the file system,
and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
ASA 5505 Split tunneling stopped working when upgraded to 8.3 (1) 8.4 (3).
A user has to connect to the old device of 8.3 (1) that they could access all of our subnets: 10.1.0.0/16, 10.33.0.0/16, 10.89.0.0/16, 10.60.0.0/16
but now, they can't and in the newspapers, I see just
6 October 31, 2012 08:17:59 110003 10.60.30.111 1 10.89.30.41 0 routing cannot locate the next hop for ICMP to outside:10.60.30.111/1 to inside:10.89.30.41/0
any tips? I almost tried everything. the running configuration is:
: Saved
:
ASA Version 8.4 (3)
!
host name asa
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.60.70.1 255.255.0.0
!
interface Vlan2
nameif outside
security-level 0
IP 80.90.98.217 255.255.255.248
!
passive FTP mode
clock timezone GMT 0
DNS lookup field inside
DNS domain-lookup outside
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the NETWORK_OBJ_10.33.0.0_16 object
10.33.0.0 subnet 255.255.0.0
network of the NETWORK_OBJ_10.60.0.0_16 object
10.60.0.0 subnet 255.255.0.0
network of the NETWORK_OBJ_10.89.0.0_16 object
10.89.0.0 subnet 255.255.0.0
network of the NETWORK_OBJ_10.1.0.0_16 object
10.1.0.0 subnet 255.255.0.0
network tetPC object
Home 10.60.10.1
test description
network of the NETWORK_OBJ_10.60.30.0_24 object
10.60.30.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.60.30.64_26 object
255.255.255.192 subnet 10.60.30.64
the SSH server object network
Home 10.60.20.6
network of the SSH_public object
network ftp_public object
Home 80.90.98.218
rdp network object
Home 10.60.10.4
ftp_server network object
Home 10.60.20.2
network ssh_public object
Home 80.90.98.218
Service FTP object
tcp destination eq 12 service
network of the NETWORK_OBJ_10.60.20.3 object
Home 10.60.20.3
network of the NETWORK_OBJ_10.60.40.192_26 object
255.255.255.192 subnet 10.60.40.192
network of the NETWORK_OBJ_10.60.10.10 object
Home 10.60.10.10
network of the NETWORK_OBJ_10.60.20.2 object
Home 10.60.20.2
network of the NETWORK_OBJ_10.60.20.21 object
Home 10.60.20.21
network of the NETWORK_OBJ_10.60.20.4 object
Home 10.60.20.4
network of the NETWORK_OBJ_10.60.20.5 object
Home 10.60.20.5
network of the NETWORK_OBJ_10.60.20.6 object
Home 10.60.20.6
network of the NETWORK_OBJ_10.60.20.7 object
Home 10.60.20.7
network of the NETWORK_OBJ_10.60.20.29 object
Home 10.60.20.29
service port_tomcat object
Beach service tcp 8080 8082 source
network of the TBSF object
172.16.252.0 subnet 255.255.255.0
the e-mail server object network
Home 10.33.10.2
Mail server description
service object HTTPS
tcp source eq https service
test network object
network access_web_mail object
Home 10.60.50.251
network downtown_Interface_host object
Home 10.60.50.1
Downtown host Interface description
service of the Oracle_port object
tcp source eq sqlnet service
network of the NETWORK_OBJ_10.60.50.248_29 object
subnet 10.60.50.248 255.255.255.248
network of the NETWORK_OBJ_10.60.50.1 object
Home 10.60.50.1
network of the NETWORK_OBJ_10.60.50.0_28 object
subnet 10.60.50.0 255.255.255.240
brisel network object
10.191.191.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.191.191.0_24 object
10.191.191.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.60.60.0_24 object
10.60.60.0 subnet 255.255.255.0
object-group service TCS_Service_Group
Description this group of Services offered is for the CLD's Clients
port_tomcat service-object
HTTPS_ACCESS tcp service object-group
EQ object of the https port
the DM_INLINE_NETWORK_1 object-group network
object-network 10.1.0.0 255.255.0.0
network-object 10.33.0.0 255.255.0.0
network-object 10.60.0.0 255.255.0.0
network-object 10.89.0.0 255.255.0.0
allow outside_1_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.33.0.0 255.255.0.0
allow outside_2_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.89.0.0 255.255.0.0
outside_3_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 allow 10.1.0.0 255.255.0.0
OUTSIDE_IN list extended access permit icmp any one time exceed
OUTSIDE_IN list extended access allow all unreachable icmp
OUTSIDE_IN list extended access permit icmp any any echo response
OUTSIDE_IN list extended access permit icmp any any source-quench
OUTSIDE_IN list extended access permitted tcp 194.2.20.0 255.255.255.0 host 80.90.98.220 eq smtp
OUTSIDE_IN list extended access permit tcp host 194.25.12.0 host 80.90.98.220 eq smtp
OUTSIDE_IN list extended access allow icmp 80.90.98.222 host 80.90.98.217
OUTSIDE_IN list extended access permit tcp host 162.162.4.1 host 80.90.98.220 eq smtp
OUTSIDE_IN list extended access permit tcp host 98.85.125.2 host 80.90.98.221 eq ssh
Standard access list OAKDCAcl allow 10.60.0.0 255.255.0.0
Standard access list OAKDCAcl allow 10.33.0.0 255.255.0.0
access-list OAKDCAcl note backoffice
Standard access list OAKDCAcl allow 10.89.0.0 255.255.0.0
access-list OAKDCAcl note maint
OAKDCAcl list standard access allowed 10.1.0.0 255.255.0.0
access-list allowed standard osgd host 10.60.20.4
access-list allowed standard osgd host 10.60.20.5
access-list allowed standard osgd host 10.60.20.7
standard access list testOAK_splitTunnelAcl allow 10.60.0.0 255.255.0.0
list access allowed extended snmp udp any eq snmptrap everything
list of access allowed extended snmp udp any any eq snmp
downtown_splitTunnelAcl list standard access allowed host 10.60.20.29
webMailACL list standard access allowed host 10.33.10.2
access-list standard HBSC allowed host 10.60.30.107
access-list standard HBSC deny 10.33.0.0 255.255.0.0
access-list standard HBSC deny 10.89.0.0 255.255.0.0
allow outside_4_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.191.191.0 255.255.255.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.1.0.0 255.255.0.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.33.0.0 255.255.0.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.60.0.0 255.255.0.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.89.0.0 255.255.0.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask 10.60.30.110 - 10.60.30.150 255.255.0.0 IP local pool OAKPRD_pool
IP local pool mail_sddress_pool 10.60.50.251 - 10.60.50.255 mask 255.255.0.0
test 10.60.50.1 mask 255.255.255.255 IP local pool
IP local pool ipad 10.60.30.90 - 10.60.30.99 mask 255.255.0.0
mask 10.60.40.200 - 10.60.40.250 255.255.255.0 IP local pool TCS_pool
local pool OSGD_POOL 10.60.50.2 - 10.60.50.10 255.255.0.0 IP mask
mask 10.60.60.0 - 10.60.60.255 255.255.0.0 IP local pool OAK_pool
IP verify reverse path inside interface
IP verify reverse path to the outside interface
IP audit alarm action name ThreatDetection attack
verification of IP within the ThreatDetection interface
interface IP outside the ThreatDetection check
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow any echo inside
ICMP allow any echo outdoors
enable ASDM history
ARP timeout 14400
NAT (inside, outside) static static source NETWORK_OBJ_10.33.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.33.0.0_16
NAT (inside, outside) static static source NETWORK_OBJ_10.89.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.89.0.0_16
NAT (inside, outside) static static source NETWORK_OBJ_10.1.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.1.0.0_16
NAT (inside, outside) static source all all NETWORK_OBJ_10.60.30.0_24 of NETWORK_OBJ_10.60.30.0_24 static destination
NAT (inside, outside) static source all all NETWORK_OBJ_10.60.30.64_26 of NETWORK_OBJ_10.60.30.64_26 static destination
NAT (inside, outside) static static source NETWORK_OBJ_10.60.40.192_26 destination NETWORK_OBJ_10.60.20.29 NETWORK_OBJ_10.60.20.29 NETWORK_OBJ_10.60.40.192_26 any port_tomcat service
NAT (inside, outside) static source any destination of all public static NETWORK_OBJ_10.60.50.1 NETWORK_OBJ_10.60.50.1
NAT (inside, outside) static static source NETWORK_OBJ_10.60.50.248_29 destination MailServer MailServer NETWORK_OBJ_10.60.50.248_29
NAT (inside, outside) static source all all NETWORK_OBJ_10.60.50.0_28 of NETWORK_OBJ_10.60.50.0_28 static destination
NAT (inside, outside) static static source NETWORK_OBJ_10.191.191.0_24 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.191.191.0_24
NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_10.60.60.0_24 NETWORK_OBJ_10.60.60.0_24 non-proxy-arp-search of route static destination
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
Route outside 0.0.0.0 0.0.0.0 80.90.98.222 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 10.60.10.10 255.255.255.255 inside
http 10.33.30.33 255.255.255.255 inside
http 10.60.30.33 255.255.255.255 inside
SNMP-server host within the 10.33.30.108 community * version 2 c
SNMP-server host within the 10.89.70.30 community *.
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA ikev1
transport mode encryption ipsec transform-set TRANS_ESP_3DES_SHA ikev1
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set lux_trans_set ikev1 aes - esp esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 84.51.31.173
card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
card crypto outside_map 2 match address outside_2_cryptomap
peer set card crypto outside_map 2 98.85.125.2
card crypto outside_map 2 set transform-set ESP-3DES-SHA ikev1
card crypto outside_map 3 match address outside_3_cryptomap
peer set card crypto outside_map 3 220.79.236.146
card crypto outside_map 3 set transform-set ESP-3DES-SHA ikev1
card crypto 4 correspondence address outside_4_cryptomap outside_map
card crypto outside_map 4 set pfs
peer set card crypto outside_map 4 159.146.232.122
card crypto 4 ikev1 transform-set lux_trans_set set outside_map
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ikev1 allow outside
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
IKEv1 crypto policy 30
preshared authentication
3des encryption
sha hash
Group 2
lifetime 28800
IKEv1 crypto policy 50
preshared authentication
aes encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 70
preshared authentication
aes encryption
sha hash
Group 5
life 86400
Telnet 10.60.10.10 255.255.255.255 inside
Telnet 10.60.10.1 255.255.255.255 inside
Telnet 10.60.10.5 255.255.255.255 inside
Telnet 10.60.30.33 255.255.255.255 inside
Telnet 10.33.30.33 255.255.255.255 inside
Telnet timeout 30
SSH 10.60.10.5 255.255.255.255 inside
SSH 10.60.10.10 255.255.255.255 inside
SSH 10.60.10.3 255.255.255.255 inside
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd dns 155.2.10.20 155.2.10.50 interface inside
dhcpd auto_config outside interface inside
!
a basic threat threat detection
length 3600 scanning-threat shun threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
TFTP server inside 10.60.10.10 configs/config1
WebVPN
internal testTG group policy
attributes of the strategy of group testTG
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
internal DefaultRAGroup_1 group strategy
attributes of Group Policy DefaultRAGroup_1
value of 155.2.10.20 DNS server 155.2.10.50
Protocol-tunnel-VPN l2tp ipsec
internal TcsTG group strategy
attributes of Group Policy TcsTG
VPN-idle-timeout 20
VPN-session-timeout 120
Ikev1 VPN-tunnel-Protocol
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list testOAK_splitTunnelAcl
the address value TCS_pool pools
internal downtown_interfaceTG group policy
attributes of the strategy of group downtown_interfaceTG
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list downtown_splitTunnelAcl
internal HBSCTG group policy
HBSCTG group policy attributes
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value HBSC
internal OSGD group policy
OSGD group policy attributes
value of 155.2.10.20 DNS server 155.2.10.50
VPN-session-timeout no
Ikev1 VPN-tunnel-Protocol
group-lock value OSGD
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list testOAK_splitTunnelAcl
internal OAKDC group policy
OAKDC group policy attributes
Ikev1 VPN-tunnel-Protocol
value of group-lock OAKDC
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list OAKDCAcl
Disable dhcp Intercept 255.255.0.0
the address value OAKPRD_pool pools
internal mailTG group policy
attributes of the strategy of group mailTG
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list webMailACL
internal OAK-distance group strategy
attributes of OAK Group Policy / remote
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value OAK-remote_splitTunnelAcl
VPN-group-policy OAKDC
type of nas-prompt service
attributes global-tunnel-group DefaultRAGroup
address pool OAKPRD_pool
ipad address pool
Group Policy - by default-DefaultRAGroup_1
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared-key *.
tunnel-group 84.51.31.173 type ipsec-l2l
IPSec-attributes tunnel-group 84.51.31.173
IKEv1 pre-shared-key *.
tunnel-group 98.85.125.2 type ipsec-l2l
IPSec-attributes tunnel-group 98.85.125.2
IKEv1 pre-shared-key *.
tunnel-group 220.79.236.146 type ipsec-l2l
IPSec-attributes tunnel-group 220.79.236.146
IKEv1 pre-shared-key *.
type tunnel-group OAKDC remote access
attributes global-tunnel-group OAKDC
address pool OAKPRD_pool
Group Policy - by default-OAKDC
IPSec-attributes tunnel-group OAKDC
IKEv1 pre-shared-key *.
type tunnel-group TcsTG remote access
attributes global-tunnel-group TcsTG
address pool TCS_pool
Group Policy - by default-TcsTG
IPSec-attributes tunnel-group TcsTG
IKEv1 pre-shared-key *.
type tunnel-group downtown_interfaceTG remote access
tunnel-group downtown_interfaceTG General-attributes
test of the address pool
Group Policy - by default-downtown_interfaceTG
downtown_interfaceTG group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group TunnelGroup1 remote access
type tunnel-group mailTG remote access
tunnel-group mailTG General-attributes
address mail_sddress_pool pool
Group Policy - by default-mailTG
mailTG group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group testTG remote access
tunnel-group testTG General-attributes
address mail_sddress_pool pool
Group Policy - by default-testTG
testTG group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group OSGD remote access
tunnel-group OSGD General-attributes
address OSGD_POOL pool
strategy-group-by default OSGD
tunnel-group OSGD ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group HBSCTG remote access
attributes global-tunnel-group HBSCTG
address OSGD_POOL pool
Group Policy - by default-HBSCTG
IPSec-attributes tunnel-group HBSCTG
IKEv1 pre-shared-key *.
tunnel-group 159.146.232.122 type ipsec-l2l
IPSec-attributes tunnel-group 159.146.232.122
IKEv1 pre-shared-key *.
tunnel-group OAK type remote access / remote
attributes global-tunnel-group OAK / remote
address pool OAK_pool
Group Policy - by default-OAK-remote control
IPSec-attributes tunnel-group OAK / remote
IKEv1 pre-shared-key *.
!
!
!
Policy-map global_policy
!
context of prompt hostname
no remote anonymous reporting call
HPM topN enable
: end
enable ASDM history
Hi David,
I see that you have:
allow outside_2_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.89.0.0 255.255.0.0
So, please make the following changes:
network object obj - 10.60.30.0
10.60.30.0 subnet 255.255.255.0
!
Route outside 10.60.30.0 255.255.255.0 80.90.98.222
Route outside 10.89.0.0 255.255.0.0 80.90.98.222
NAT (outside, outside) 1 source static obj - 10.60.30.0 obj - 10.60.30.0 static destination NETWORK_OBJ_10.89.0.0_16 NETWORK_OBJ_10.89.0.0_16 non-proxy-arp-search to itinerary
HTH
Portu.
Please note all useful posts
Post edited by: Javier Portuguez
-
Need to edit a presentation published when downloading connect I can not locate the powerpoint file
I'm editing a published previously adobe connect presentation. I downloaded the hardware connection, but cannot locate the PowerPoint slides set to change.
Where would it be?
If the person who has published the presentation (with presenter I guess) on the server has not chosen to also download the source files, then it is no PPT (X) and the presenter on the server source files zip to download. You need to check if the source files are stored elsewhere or start from scratch.
The output call you refferenced is used to download an object on the Connect Server, mainly of records of meeting.
You mentioned that you tried to change the SCO_ID, but that should be something that assigns a Connect. What are you trying to do this would require allows you to change the SCO_ID?
-
Could not locate the menus.xml - CS5 file
While trying to open Dreamweaver CS5 on mac OSX 10.8.2, I keep running into this error message.
"Dreamweaver fails to locate the menus.xml file and it cannot rebuild from a backup." You may need to reinstall Dreamweaver. »
I would try to reinstall, but I am currently overseas for 3 months and don't have my serial number or the disc with me. Does anyone know of a solution? I tried searching on the web but could not come up with solutions.
Thanks in advance.
Eric
Use this link: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
Read the instructions very carefully. It's not a pirate download site. This site offers downloads of the trial for 30 days of CS5 (since Adobe lists more links on their portal).
Once you download the installation, be sure to use your serial key.
-
BlackBerry smartphones can not locate the calendar
Help... No calendar ICON and it is not in the "applications" under options, advanced, options. I've recently upgraded to 4.5 - re - can I download that? Only had phone 2 weeks and still try to understand! Thank you!
Search in all folders and see if it is there.
If still no, follow these steps:
Define "Dial from home screen" set to "No" (go to the phone dialer > Options > General Options.)
Now, go to your home screen and quickly press the L key. Display your calendar?
-
BlackBerry smartphones can not locate the task icon
I want to add tasks on my Tour 9630. The instructions say to go to the home screen and locate the icon "tasks. My home screen doesn't have a task icon. I searched in the calendar and contacts, but can't find it. There is no image of the icon of the task set in any of the documents. Please notify.
Thank you.
From your home screen
Click on the Blackberry button
Search for Applications
Its the second or the third icon
Hope this helps
Maybe you are looking for
-
HP Pavilion p2-1033w desktop PC
very well so it's my parents computer and I am trying to fix it but about everything what happens is a black screen and it says error no startup disk is detected or the drive failed I tried the ctrl alt del, but it return me to the screen black with
-
Mixture of blackBerry software now a connection
I was wondering what the correct mixture behavior should be considered for the State a USB connection no. What I feel is the next, a wifi or mobile connection will remain connected for a day at the most, but I can never connect in any other way excep
-
Canoe reset the password on my pavilion slimline S7727C
I have a pavilion S7727C slimline runnig Office win xp pro sp3. The other day I was leaving for a trip and changed the password of user logon to oust the children while I was away. 3 days later, on the way back, I realized that I could not remember w
-
First of all, I got a new game called (2 prototypes) the game was working fine then when I tried to run 2 days after installing... I got an error message saying XAudio2 is not found. Please re - install the game and install him required DirectX 9 pro
-
I'm running a Windows PC and then the CC installation my ability with the mouse on the color chart to see a preview of names there disappeared. My colleague on a Mac is not the same problem. There seems not to be a setting in Photoshop and the same