Could not locate the next hop for ICMP outside:10.60.30.111/1 to inside:10.89.30.41/0 routing
ASA 5505 Split tunneling stopped working when upgraded to 8.3 (1) 8.4 (3).
A user has to connect to the old device of 8.3 (1) that they could access all of our subnets: 10.1.0.0/16, 10.33.0.0/16, 10.89.0.0/16, 10.60.0.0/16
but now, they can't and in the newspapers, I see just
6 October 31, 2012 08:17:59 110003 10.60.30.111 1 10.89.30.41 0 routing cannot locate the next hop for ICMP to outside:10.60.30.111/1 to inside:10.89.30.41/0
any tips? I almost tried everything. the running configuration is:
: Saved
:
ASA Version 8.4 (3)
!
host name asa
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 10.60.70.1 255.255.0.0
!
interface Vlan2
nameif outside
security-level 0
IP 80.90.98.217 255.255.255.248
!
passive FTP mode
clock timezone GMT 0
DNS lookup field inside
DNS domain-lookup outside
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
network of the NETWORK_OBJ_10.33.0.0_16 object
10.33.0.0 subnet 255.255.0.0
network of the NETWORK_OBJ_10.60.0.0_16 object
10.60.0.0 subnet 255.255.0.0
network of the NETWORK_OBJ_10.89.0.0_16 object
10.89.0.0 subnet 255.255.0.0
network of the NETWORK_OBJ_10.1.0.0_16 object
10.1.0.0 subnet 255.255.0.0
network tetPC object
Home 10.60.10.1
test description
network of the NETWORK_OBJ_10.60.30.0_24 object
10.60.30.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.60.30.64_26 object
255.255.255.192 subnet 10.60.30.64
the SSH server object network
Home 10.60.20.6
network of the SSH_public object
network ftp_public object
Home 80.90.98.218
rdp network object
Home 10.60.10.4
ftp_server network object
Home 10.60.20.2
network ssh_public object
Home 80.90.98.218
Service FTP object
tcp destination eq 12 service
network of the NETWORK_OBJ_10.60.20.3 object
Home 10.60.20.3
network of the NETWORK_OBJ_10.60.40.192_26 object
255.255.255.192 subnet 10.60.40.192
network of the NETWORK_OBJ_10.60.10.10 object
Home 10.60.10.10
network of the NETWORK_OBJ_10.60.20.2 object
Home 10.60.20.2
network of the NETWORK_OBJ_10.60.20.21 object
Home 10.60.20.21
network of the NETWORK_OBJ_10.60.20.4 object
Home 10.60.20.4
network of the NETWORK_OBJ_10.60.20.5 object
Home 10.60.20.5
network of the NETWORK_OBJ_10.60.20.6 object
Home 10.60.20.6
network of the NETWORK_OBJ_10.60.20.7 object
Home 10.60.20.7
network of the NETWORK_OBJ_10.60.20.29 object
Home 10.60.20.29
service port_tomcat object
Beach service tcp 8080 8082 source
network of the TBSF object
172.16.252.0 subnet 255.255.255.0
the e-mail server object network
Home 10.33.10.2
Mail server description
service object HTTPS
tcp source eq https service
test network object
network access_web_mail object
Home 10.60.50.251
network downtown_Interface_host object
Home 10.60.50.1
Downtown host Interface description
service of the Oracle_port object
tcp source eq sqlnet service
network of the NETWORK_OBJ_10.60.50.248_29 object
subnet 10.60.50.248 255.255.255.248
network of the NETWORK_OBJ_10.60.50.1 object
Home 10.60.50.1
network of the NETWORK_OBJ_10.60.50.0_28 object
subnet 10.60.50.0 255.255.255.240
brisel network object
10.191.191.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.191.191.0_24 object
10.191.191.0 subnet 255.255.255.0
network of the NETWORK_OBJ_10.60.60.0_24 object
10.60.60.0 subnet 255.255.255.0
object-group service TCS_Service_Group
Description this group of Services offered is for the CLD's Clients
port_tomcat service-object
HTTPS_ACCESS tcp service object-group
EQ object of the https port
the DM_INLINE_NETWORK_1 object-group network
object-network 10.1.0.0 255.255.0.0
network-object 10.33.0.0 255.255.0.0
network-object 10.60.0.0 255.255.0.0
network-object 10.89.0.0 255.255.0.0
allow outside_1_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.33.0.0 255.255.0.0
allow outside_2_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.89.0.0 255.255.0.0
outside_3_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 allow 10.1.0.0 255.255.0.0
OUTSIDE_IN list extended access permit icmp any one time exceed
OUTSIDE_IN list extended access allow all unreachable icmp
OUTSIDE_IN list extended access permit icmp any any echo response
OUTSIDE_IN list extended access permit icmp any any source-quench
OUTSIDE_IN list extended access permitted tcp 194.2.20.0 255.255.255.0 host 80.90.98.220 eq smtp
OUTSIDE_IN list extended access permit tcp host 194.25.12.0 host 80.90.98.220 eq smtp
OUTSIDE_IN list extended access allow icmp 80.90.98.222 host 80.90.98.217
OUTSIDE_IN list extended access permit tcp host 162.162.4.1 host 80.90.98.220 eq smtp
OUTSIDE_IN list extended access permit tcp host 98.85.125.2 host 80.90.98.221 eq ssh
Standard access list OAKDCAcl allow 10.60.0.0 255.255.0.0
Standard access list OAKDCAcl allow 10.33.0.0 255.255.0.0
access-list OAKDCAcl note backoffice
Standard access list OAKDCAcl allow 10.89.0.0 255.255.0.0
access-list OAKDCAcl note maint
OAKDCAcl list standard access allowed 10.1.0.0 255.255.0.0
access-list allowed standard osgd host 10.60.20.4
access-list allowed standard osgd host 10.60.20.5
access-list allowed standard osgd host 10.60.20.7
standard access list testOAK_splitTunnelAcl allow 10.60.0.0 255.255.0.0
list access allowed extended snmp udp any eq snmptrap everything
list of access allowed extended snmp udp any any eq snmp
downtown_splitTunnelAcl list standard access allowed host 10.60.20.29
webMailACL list standard access allowed host 10.33.10.2
access-list standard HBSC allowed host 10.60.30.107
access-list standard HBSC deny 10.33.0.0 255.255.0.0
access-list standard HBSC deny 10.89.0.0 255.255.0.0
allow outside_4_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.191.191.0 255.255.255.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.1.0.0 255.255.0.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.33.0.0 255.255.0.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.60.0.0 255.255.0.0
OAK-remote_splitTunnelAcl-list of allowed access standard 10.89.0.0 255.255.0.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask 10.60.30.110 - 10.60.30.150 255.255.0.0 IP local pool OAKPRD_pool
IP local pool mail_sddress_pool 10.60.50.251 - 10.60.50.255 mask 255.255.0.0
test 10.60.50.1 mask 255.255.255.255 IP local pool
IP local pool ipad 10.60.30.90 - 10.60.30.99 mask 255.255.0.0
mask 10.60.40.200 - 10.60.40.250 255.255.255.0 IP local pool TCS_pool
local pool OSGD_POOL 10.60.50.2 - 10.60.50.10 255.255.0.0 IP mask
mask 10.60.60.0 - 10.60.60.255 255.255.0.0 IP local pool OAK_pool
IP verify reverse path inside interface
IP verify reverse path to the outside interface
IP audit alarm action name ThreatDetection attack
verification of IP within the ThreatDetection interface
interface IP outside the ThreatDetection check
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any inside
ICMP allow any echo inside
ICMP allow any echo outdoors
enable ASDM history
ARP timeout 14400
NAT (inside, outside) static static source NETWORK_OBJ_10.33.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.33.0.0_16
NAT (inside, outside) static static source NETWORK_OBJ_10.89.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.89.0.0_16
NAT (inside, outside) static static source NETWORK_OBJ_10.1.0.0_16 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.1.0.0_16
NAT (inside, outside) static source all all NETWORK_OBJ_10.60.30.0_24 of NETWORK_OBJ_10.60.30.0_24 static destination
NAT (inside, outside) static source all all NETWORK_OBJ_10.60.30.64_26 of NETWORK_OBJ_10.60.30.64_26 static destination
NAT (inside, outside) static static source NETWORK_OBJ_10.60.40.192_26 destination NETWORK_OBJ_10.60.20.29 NETWORK_OBJ_10.60.20.29 NETWORK_OBJ_10.60.40.192_26 any port_tomcat service
NAT (inside, outside) static source any destination of all public static NETWORK_OBJ_10.60.50.1 NETWORK_OBJ_10.60.50.1
NAT (inside, outside) static static source NETWORK_OBJ_10.60.50.248_29 destination MailServer MailServer NETWORK_OBJ_10.60.50.248_29
NAT (inside, outside) static source all all NETWORK_OBJ_10.60.50.0_28 of NETWORK_OBJ_10.60.50.0_28 static destination
NAT (inside, outside) static static source NETWORK_OBJ_10.191.191.0_24 destination NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.60.0.0_16 NETWORK_OBJ_10.191.191.0_24
NAT (inside, outside) static source DM_INLINE_NETWORK_1 DM_INLINE_NETWORK_1 NETWORK_OBJ_10.60.60.0_24 NETWORK_OBJ_10.60.60.0_24 non-proxy-arp-search of route static destination
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
Route outside 0.0.0.0 0.0.0.0 80.90.98.222 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 10.60.10.10 255.255.255.255 inside
http 10.33.30.33 255.255.255.255 inside
http 10.60.30.33 255.255.255.255 inside
SNMP-server host within the 10.33.30.108 community * version 2 c
SNMP-server host within the 10.89.70.30 community *.
No snmp server location
No snmp Server contact
Community SNMP-server
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA ikev1
transport mode encryption ipsec transform-set TRANS_ESP_3DES_SHA ikev1
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set lux_trans_set ikev1 aes - esp esp-sha-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
card crypto outside_map 1 match address outside_1_cryptomap
peer set card crypto outside_map 1 84.51.31.173
card crypto outside_map 1 set transform-set ESP-3DES-SHA ikev1
card crypto outside_map 2 match address outside_2_cryptomap
peer set card crypto outside_map 2 98.85.125.2
card crypto outside_map 2 set transform-set ESP-3DES-SHA ikev1
card crypto outside_map 3 match address outside_3_cryptomap
peer set card crypto outside_map 3 220.79.236.146
card crypto outside_map 3 set transform-set ESP-3DES-SHA ikev1
card crypto 4 correspondence address outside_4_cryptomap outside_map
card crypto outside_map 4 set pfs
peer set card crypto outside_map 4 159.146.232.122
card crypto 4 ikev1 transform-set lux_trans_set set outside_map
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ikev1 allow outside
IKEv1 crypto policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
preshared authentication
aes-256 encryption
sha hash
Group 5
life 86400
IKEv1 crypto policy 30
preshared authentication
3des encryption
sha hash
Group 2
lifetime 28800
IKEv1 crypto policy 50
preshared authentication
aes encryption
sha hash
Group 1
life 86400
IKEv1 crypto policy 70
preshared authentication
aes encryption
sha hash
Group 5
life 86400
Telnet 10.60.10.10 255.255.255.255 inside
Telnet 10.60.10.1 255.255.255.255 inside
Telnet 10.60.10.5 255.255.255.255 inside
Telnet 10.60.30.33 255.255.255.255 inside
Telnet 10.33.30.33 255.255.255.255 inside
Telnet timeout 30
SSH 10.60.10.5 255.255.255.255 inside
SSH 10.60.10.10 255.255.255.255 inside
SSH 10.60.10.3 255.255.255.255 inside
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
dhcpd dns 155.2.10.20 155.2.10.50 interface inside
dhcpd auto_config outside interface inside
!
a basic threat threat detection
length 3600 scanning-threat shun threat detection
threat detection statistics
a statistical threat detection tcp-interception rate-interval 30 burst-400-rate average rate 200
TFTP server inside 10.60.10.10 configs/config1
WebVPN
internal testTG group policy
attributes of the strategy of group testTG
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
internal DefaultRAGroup_1 group strategy
attributes of Group Policy DefaultRAGroup_1
value of 155.2.10.20 DNS server 155.2.10.50
Protocol-tunnel-VPN l2tp ipsec
internal TcsTG group strategy
attributes of Group Policy TcsTG
VPN-idle-timeout 20
VPN-session-timeout 120
Ikev1 VPN-tunnel-Protocol
IPSec-udp disable
IPSec-udp-port 10000
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list testOAK_splitTunnelAcl
the address value TCS_pool pools
internal downtown_interfaceTG group policy
attributes of the strategy of group downtown_interfaceTG
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list downtown_splitTunnelAcl
internal HBSCTG group policy
HBSCTG group policy attributes
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value HBSC
internal OSGD group policy
OSGD group policy attributes
value of 155.2.10.20 DNS server 155.2.10.50
VPN-session-timeout no
Ikev1 VPN-tunnel-Protocol
group-lock value OSGD
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list testOAK_splitTunnelAcl
internal OAKDC group policy
OAKDC group policy attributes
Ikev1 VPN-tunnel-Protocol
value of group-lock OAKDC
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list OAKDCAcl
Disable dhcp Intercept 255.255.0.0
the address value OAKPRD_pool pools
internal mailTG group policy
attributes of the strategy of group mailTG
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list webMailACL
internal OAK-distance group strategy
attributes of OAK Group Policy / remote
value of 155.2.10.20 DNS server 155.2.10.50
Ikev1 VPN-tunnel-Protocol
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value OAK-remote_splitTunnelAcl
VPN-group-policy OAKDC
type of nas-prompt service
attributes global-tunnel-group DefaultRAGroup
address pool OAKPRD_pool
ipad address pool
Group Policy - by default-DefaultRAGroup_1
IPSec-attributes tunnel-group DefaultRAGroup
IKEv1 pre-shared-key *.
tunnel-group 84.51.31.173 type ipsec-l2l
IPSec-attributes tunnel-group 84.51.31.173
IKEv1 pre-shared-key *.
tunnel-group 98.85.125.2 type ipsec-l2l
IPSec-attributes tunnel-group 98.85.125.2
IKEv1 pre-shared-key *.
tunnel-group 220.79.236.146 type ipsec-l2l
IPSec-attributes tunnel-group 220.79.236.146
IKEv1 pre-shared-key *.
type tunnel-group OAKDC remote access
attributes global-tunnel-group OAKDC
address pool OAKPRD_pool
Group Policy - by default-OAKDC
IPSec-attributes tunnel-group OAKDC
IKEv1 pre-shared-key *.
type tunnel-group TcsTG remote access
attributes global-tunnel-group TcsTG
address pool TCS_pool
Group Policy - by default-TcsTG
IPSec-attributes tunnel-group TcsTG
IKEv1 pre-shared-key *.
type tunnel-group downtown_interfaceTG remote access
tunnel-group downtown_interfaceTG General-attributes
test of the address pool
Group Policy - by default-downtown_interfaceTG
downtown_interfaceTG group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group TunnelGroup1 remote access
type tunnel-group mailTG remote access
tunnel-group mailTG General-attributes
address mail_sddress_pool pool
Group Policy - by default-mailTG
mailTG group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group testTG remote access
tunnel-group testTG General-attributes
address mail_sddress_pool pool
Group Policy - by default-testTG
testTG group of tunnel ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group OSGD remote access
tunnel-group OSGD General-attributes
address OSGD_POOL pool
strategy-group-by default OSGD
tunnel-group OSGD ipsec-attributes
IKEv1 pre-shared-key *.
type tunnel-group HBSCTG remote access
attributes global-tunnel-group HBSCTG
address OSGD_POOL pool
Group Policy - by default-HBSCTG
IPSec-attributes tunnel-group HBSCTG
IKEv1 pre-shared-key *.
tunnel-group 159.146.232.122 type ipsec-l2l
IPSec-attributes tunnel-group 159.146.232.122
IKEv1 pre-shared-key *.
tunnel-group OAK type remote access / remote
attributes global-tunnel-group OAK / remote
address pool OAK_pool
Group Policy - by default-OAK-remote control
IPSec-attributes tunnel-group OAK / remote
IKEv1 pre-shared-key *.
!
!
!
Policy-map global_policy
!
context of prompt hostname
no remote anonymous reporting call
HPM topN enable
: end
enable ASDM history
Hi David,
I see that you have:
allow outside_2_cryptomap to access extended list ip 10.60.0.0 255.255.0.0 10.89.0.0 255.255.0.0
So, please make the following changes:
network object obj - 10.60.30.0
10.60.30.0 subnet 255.255.255.0
!
Route outside 10.60.30.0 255.255.255.0 80.90.98.222
Route outside 10.89.0.0 255.255.0.0 80.90.98.222
NAT (outside, outside) 1 source static obj - 10.60.30.0 obj - 10.60.30.0 static destination NETWORK_OBJ_10.89.0.0_16 NETWORK_OBJ_10.89.0.0_16 non-proxy-arp-search to itinerary
HTH
Portu.
Please note all useful posts
Post edited by: Javier Portuguez
Tags: Cisco Security
Similar Questions
-
ASA-6-110003: routing could not locate the next hop
Hello
I have a problem with our ASA firewall. I have a firewall that's inside, outside and DMZ interface. I have VPN clients that connect correctly and can access the internal network. However, for profiles that I have configured to connect via VPN to the DMZ network fails with the following messages.
ASA-6-110003: routing could not locate the next hop
&
ASA-6-302014: disassembly of the TCP connection... No contiguity valid
I have connections in the DMZ, but aren't VPN via internal and external interfaces without problem.
The routing table has a route to this network and I have a nat in place - I'm quite puzzled by the present.
Thank you
Ed
Hello Ed,
Well, Nat seems good but you can do the following for me please:
network of the DMZ_subnet object
10.1.213.0 subnet 255.255.255.0
network of the VPN_Subnet object
subnet 255.255.x.x x.x.x.x
public static DMZ_subnet DMZ_subnet destination NAT source (dmz - 2 outside) public static VPN_Subnet VPN_Subnet
Kind regards
Julio
-
Here's the situation.
First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.
Here are the solutions I tried, in and out of safe mode:
While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.
In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.
It Startin via msconfig did not work.
Tried to go through Device Manager, which is completely empty for some reason any.
System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.
I knew, but there may be malware, mutiple scans with several services did not find anything.
I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?
Hello
Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.
I would like to ask you:
- You are running Windows 7 or Windows 10 on your PC?
- When was the last time it was working fine? Remember to make changes to the computer before this problem?
Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:
- Open the start menu and type "cmd".
- Right-click on the command prompt and click "run as administrator".
- Type the following commands and press ENTER after each.
DISM.exe / Online/Cleanup-image /Scanhealth
DISM.exe / Online/Cleanup-image /Restorehealth
After you run these commands, restart the system and check.
You can also view,
Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness
https://support.Microsoft.com/en-us/KB/947821
If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.
Refer,
Hope this information was useful.
-
Hi guys,.
I have problems getting my sbRIO 9606 to deploy.
Everything's fine until during the deployment process, I get this:
Deployment of sbRIO 9606 chassis (sbRIO-9606)
LabVIEW: (Hex 0x80DF001E) could not find the plug-in for this deployment item. Make sure that the appropriate software is installed.I tried to reinstall LV (ensuring that FPGA & RT deployment options are checked) and the 9606 software shipped, but it made no difference. I'm still waiting my next serial key by NOR, I have to wait that I recorded it before I can deploy?
Please find attached the screenshots of my:
- License Manager OR
- Overview of the 9606 MAX
- My project folder
- Dialog box deployment where the error is displayed.
-Adam
Hi Tim,.
In time real 11 is installed according to the recommended software battery installation program included on the disc NEITHER RIO provided in the starter pack.
The problem is that the recommended Software NI Scan Engine 3.0 installation program.
The sbRIO 9606 does not support scanning engine.
Once the scanning engine support has been uninstalled, I could deploy on my 9606.
-
I am running Windows XP SP3, I can't uninstall the old java version 6 update 29, I get a "error code 1606: could not locate the directory... fatal error" How can I remove the old version of java? I tried to uninstall regedit.exe, javaRa and windows unsuccessfully capability. I uninstalled java, deleted the program file, but the version 6 29 poster update still in the program directory. Help, please!
original title: uninstall older versions of JavaHelloMethod 1:Check out the link and follow the steps.After uninstalling Java, how to remove its entry in the windows?Method 2:See the article and follow the steps.Error message when you install a program: "Error 1606. Could not access thenetwork location. "All the users\ directory ' Method 3:Check out the link and follow the steps.
Download errors: 1305, 2755, 1606, etc..
http://www.Java.com/en/download/help/error_installshield.XMLImportant This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows -
I could not install the update KB2686509 for Widows XP Pro, for the last 6 months. WHY?
Maybe check the related threads and see why others also had problems with this update:
especially this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/kb2686509-repeatedly-fails-with-error-code/0deeacb6-115c-419d-ac37-03ff8927b79c
That should answer your question about why you have a problem installing the update.
-
RAID 5 obtained corrupte had to rebuild after that can't create system restore point. Tried everything sfc, fsutil, Dungeon SystemPropertiesProtection screen displaying this error: "could not create the scheduled task for the following reason: cannot create a file when that file already exists." (0x800700B7)"system of work in all other respects. SFC says it found and fixed errors every time I run it.
Fix tried Della Li: Please remove the WindowsBackup folder in the HKEY_LOCAL_MACHINE NT\CurrentVersion\Schedule\TaskCache\Tree\Microsoft\Windows.
Delete the WINDOWS BACKUP folder. Unfortunately this folder does not exist.
Checked VSS, Taskscheduler and other services are runnig
Tried to boot from the CD and widowed revover. Says no problems. The error to any manulation of the checkbox in the properties of the system, the system protection screen
Solved
It turns out that task scheduler got corrupted it have several tasks Scheduler said were not available, but are still in the working directory. These tasks especially SR from compensation directory solved the problem and I can now create backup points.
-
Original title: Windows Vista, Windows Mail, error 623, unable to connect to the mail.
This problem occurred after a storm. Modem was fried. Replaced the modem with the modem "2wire" ATT.Now get "error 623: the system could not find the directory entry for this connection"or the sys works very well. " Att think maybe in Vista? Help, please. Works of g-mail, but I like Windows mail.
Hello Bbuddes,
You can watch the following information/tutorial to help with most of the problems of Windows Mail.
http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.htmlThere is a section to reset Windows Mail which can help with your problem.
Sincerely,.
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Update of security hung up during installation. I waited 12 hours for the update complete and nothing happened. Whe I reboot XP P4 syster, I get the Message from messageError: Winlogon.Exe could not locate component. This Application did not start because Comctl32.Dll was not found.
Re-installed SP3... Installed hard drive then... cloned old drive and new drive... After several updates, it seems to do very well. Tried several programs/operations and seems normal. One day turned but didn't have to build another system or this one back up. Thanks for the idea. F
-
Could not locate the trash on laptop
I sent many fake pictures and files in the trash. I tried to recover a file deleted last night and could not find the Recycle Bin on my laptop. Usually, on my previous dell computers, it's a shortcut icon, not on this one! Can someone help me locate it? Thank you
Right-click on the desktop
Select Customize
In the left pane, select the Change desktop icons
Select Trash Microsoft Security MVP, 2004-2009 -
Could not receive the serial number for the upgrade of room 6.
I bought lightroom 6 upgrade in Korea adobe online store but I couldn't get the serial number.
Order number: 12861352159
order date: 18/09/2016
I contacted "digital river", is seller official adobe in Korea.
But they said that they do not manage the service customer for Adobe Systems, and they suggested to contact Adobe directly.
So I tried to get in touch with the chat service to "'https://helpx.adobe.com/support.html ' ."
But they could not pick up my purchase.
What can I do now?
The problem has been resolved.
-
Could not locate the system volume
I have a very similar problem that has been published before; However, the posted solution worked.
I can't find in the newspapers, what is actually wrong. If anyone can help, I'd appreciate it.
"Then the conversion of a server to ESX 3.5 Server 2003 I received this message after only 95% complete.". Failure of the Reconfiguration of the error. With the State: FAILED: could not find the system volume, reconfiguration is not possible.
I use VMware vCenter Converter Standalone 4.0.1"
Newspapers reported the following errors (which are equivalent):
Impossible to reconfigure a source that doesn't have a system volume
converter.fault.ReconfigurationNoSystemVolumeFault
It seems that there are 2 physical disks in the system
> Drive:
. \PhysicalDrive0 a type of adapter: 1> Drive:
. A type of adapter \PhysicalDrive1: 1Converter is to see the C:\ as long as the system volume, but there is no active flag set on it. The second disc is recognized, but according to it's Converter:
> is a dynamic volume. No significant partition information may be associated with him
So, it looks like there's a mirror of software on the source physical system or the original system was dual boot between something like Windows 2008 and 2003 Server.
If it's a mirror of the software, you can:
-remove the mirror and conversion
-Use gparted on the virtual machine to set start-up/active at the first vmdk file flags, and then reconfigure the virtual machine via converter
If it is a dual-boot configuration, then I do not think that it is supported.
Kind regards
EvilOne
VMware vExpert 2009
NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.
-
Windows 10 could not locate the boot camp partition
I'm trying to install 10 Windows on an iMac end of 2015 with a 512 SSD. With the help of Boot Camp and an ISO of Windows 10, I am able to create the Bootcamp partition and the iMac restarts in the Windows of Windows installation. I enter my product key for my Windows 7 DVD and reach the screen showing partitions. I select "disk 0 Partition 5 Boot Camp" partition and click on 'Format' according to the Apple support document. The partition is then renamed to 'Drive Partition 0 5'. When I select the next button, I get the following error message:- "we couldn't create a new partition or locate an existing one. For more information, see the Setup logs files'. The Windows Installer does not progress. I deleted the partition several times using bootcamp and restarted the installation and always get the same failure.
Any advice on how to install Windows would be greatly appreciated. Boot Camp 6 will let me install Windows 7 on the iMac and so I need to use Windows 10. I guess the Windows 10 ISO downloaded from Microsoft will work with the Windows 7 product key and Setup seems to accept it.
Please, disconnect all external storage devices to your iMac and run the following two procedures.
Reset the management system (SCM) controller on your Mac - Apple Support
How to reset the NVRAM on your Mac - Apple Support
and now try BC Assistant.
-
Windows could not load the backup selected for the following reasons
I'm having a problem, try to restore a backup set
A failure of HD I had to wipe my computer.
Now I'm tyring to restore and it doesn't give me the error on the title of this thread with 0x810000E3 error code
I have windows vista Home premium
I can see the ZIP files on my external USB hard drive, but when I double click using windows compress or winzip files are not open.
I tried the restore (basic and advanced) the windows backup and restore program nothing works.
I have crucial information on this drive I need to recover.
Any information is greatly appreciated.
Thank you
I could not find any information on this specific error code - so it will have to address the situation in a generic way.
Here is an article on the restore procedure: http://www.vista4beginners.com/How-to-restore-files to make sure you do this right. It's a selective restore of a full or selective backup (not a full restore from a full backup) - but since you did a full backup, it matches your process more closely than would a full restore.
This is a GREAT article on the backup and restore processes in Vista http://technet.microsoft.com/en-us/magazine/2007.09.backup.aspx , but he won't go into detail about the restoration process - considering almost as easy, of course. But it teaches you a lot about what is possible and how to do it.
Here is an article on the advanced use of restoration (during normal restore does not work): http://www.mayankraichura.com/post/2009/08/06/Avdvanced-Restore-via-Windows-Vista-Backup-and-Restore-Center.aspx.
I also found the following (but don't know if it of true or not):
1. after the start of "backup and Restore Center."
2. I chose "Advanced Restore"
3. I was did not an administrator password... maybe because my account is an administrator account.
4 choose "files from a backup made on a different computer.
5. in the dialog box indicating "Select the location of the backup to restore", select "hard drive, CD or DVD...". »
6. under the drop-down list box, select your drive/partition and continue
7. If all the backups on your drive, it will show a list of them.
8. in my case, he showed a backup, but in the backup location, it will show "backup location is not available."
9. I was frustrated, but then I somehow just select this backup (Yes... even if he said that the backup location is not available " ")
10. and you press "next".
11 guess what... no error!
12. a window appeared asking me if I wanted to do a full restore, or I want to select specific folders or files.
13. I selected the folders I wanted to restore and bingo... it their restored smoothly.
14. so that the next time see a mistake, try to continue with him... ;)
I don't know if this will help, but it does not provide much information about the process (when it works). I hope you find any error or discrepancy in your procedure and it will clear up and allow you to restore.
I hope this helps.
Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
COULD NOT LOCATE THE DEFINITION OF UNEMPLOYMENT INSURANCE FILE
WHEN I TURN ON MY COMPUTER AND IT BOOTS UP TO WINDOWS VISTA A POP COMES UP SAYING UNABLE TO LOCATE THE U I DEFINITION OF THE FILE THEN YOU CAN PRESS OK AND IT GOES AWAY. HOW CAN I FIX IT
Hello
Please no type is all uppercase because it is difficult to read and regarded as yelling.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------------
If necessary:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
a small box in the lower-left - show for all users can check only).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
they loaded and much more. This exceptionally effective utility will show you even owned by each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to startup automatically when your system boots and you
opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
start the settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspxWhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
The command - line String, product name, file Version, company name, location in the registry or the file system,
and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/Hope these helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
Hi, I would ask if cold advise me what might be broken in my iphone. My iphone 4S envy of 30cm and closed down. After a while he started again and everything was fine. But after a while you stop again without reason. and then I wasn't able to star it
-
FaceTime does not account for failover of screen lock
Hi all I've had this problem for a while now (at least since iOS 8) as well as with different iPhones (5, 5s, 6s). I usually failover of screen lock ON since I like to use my phone while on the couch or in bed and do not want to worry that the screen
-
Satellite P200-1 to 4 does nothing on AC/battery
Hi all I have a problem with my Satellite P200-1 to 4.When I connect the battery to the power adapter, the laptop does nothing (no lights, no sounds) When I dosconnect the battery and leave the AC in place, the system starts normally. I tried another
-
The figures in the income and expenditure for each year of the budget are the same. Of course they would vary, for example your salary for 2010, 2011 and 2012 will not be the same, but there is no possibility for them to be different.
-
Fake message Windows 7 not genuine microsoft essential security
Hello I got a fake message from my windows copy is not genuine microsoft essential security. I used this original copy for more than a year. NEWS OF THE BONE; Windows 7 starter 32-bit Help, please. Khairi