ADF problems Table height. Need to auto height adjustment.

Similar Questions

• Fixed table height

  Hello
  
  I create a model where I need a size of fixed table height.
  For example: I need a table with 10 rows. If I have enough data to fill in these lines, they should be printed virgins.
  
  I saw in other threads that there is a way to limit the no. lines using <? for each: TAGNAME [position () < 10]? > in the first and the last field in the table. However, I have a different situation. In the same table, I have 2 different repeating groups - used in the 1st row and 2nd in the next line. So, I won't be able to use this function before the 1st row and end after the 2nd. If I use it only on a single group, I can't limit the total no. 10 lines. How can I accomplish this?
  
  Also, when I used this position() on the first line for testing, data came out white. Help, please.
  
  Thank you!

  Make sure your Inbox sent the sample to fill line up to 10.

  used below logic

  .... in a row in your table - need get the number of front-line and save it in a variable

  next to your table row

  <10?>............. -this complete lines if the number above is<>

• AF:table height

  Hello
  
  How can I make a height of af: table adjust the number of lines?
  
  Currently, I have a table that returns only 4 rows, so there is plenty of extra space... but when I add data to the database there are more lines so the af: table will need to be larger.
  
  Thank you, Mitch

  Hello

  The af:table component has a property named autoHeightRows, the number, you set this property to match the maximum number of lines that displays the table prior to the addition of a vertical scroll bar. Secondly, when this property is set, the table will be reduced to adjust the number of rows less than the value of autoHeightRows.

  Kind regards
  Matthew.

• How to call a display object with the criteria of the different point of view in each line an ADF BC table (Urgent)

  Hello world

  I use 11.1.1.7 version of Jdeveloper. I have a table adf BC. I need to call another ADF BC table inside the table. I need get the questionId from each row in the main table and fix the questionId as a point of view of the criteria drop inside the main table. I use to execute with parameter but always get the id of the last row question and criteria of this id as a point of view to each row of the table. How can I do this? 

  < af:table value = "#{bindings." AttachmentYesNoVO11.collectionModel}.

  var = "row" rows = "#{bindings." AttachmentYesNoVO11.rangeSize}.

  emptyText = "#{bindings." AttachmentYesNoVO11.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." AttachmentYesNoVO11.rangeSize}.

  rowBandingInterval = "0" id = "t2".

  "partialTriggers =": cb4: cb3 ".

  styleClass = "AFStretchWidth" inlineStyle = "height: auto;"

  width = "1250" >

  < af:column sortProperty = "#{bindings." AttachmentYesNoVO11.hints.Question.name}.

  sortable = "false".

  headerText = "#{bindings." AttachmentYesNoVO11.hints.Question.label}.

  ID = "c10" width = "300" >

  < af:inputText value = "#{row.bindings.Question.inputValue} '"

  label = "#{bindings." AttachmentYesNoVO11.hints.Question.label}.

  required = "#{bindings." AttachmentYesNoVO11.hints.Question.mandatory}.

  columns = "#{bindings." AttachmentYesNoVO11.hints.Question.displayWidth}.

  maximumLength = "#{bindings." AttachmentYesNoVO11.hints.Question.precision}.

  shortDesc = "#{bindings." AttachmentYesNoVO11.hints.Question.tooltip}.

  ID = "it1" lines = '8' readOnly = "true" contentStyle = "width: 330px; "margin: 10px" >

  < f: validator binding="#{row.bindings.Question.validator}"/ >

  < / af:inputText >

  < / af:column >

  < af:column headerText = "#{bindings." AttachmentYesNoVO11.hints.ApplicationId.label}.

  ID = "c1" width = "300" >

  < af:table value = "#{bindings." AttachmentVO1.collectionModel}.

  var = "row" rows = "#{bindings." AttachmentVO1.rangeSize}.

  emptyText = "#{bindings." AttachmentVO1.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." AttachmentVO1.rangeSize}.

  selectionListener = "#{bindings." AttachmentVO1.collectionModel.makeCurrent}.

  rowSelection = 'single '.

  Binding = "#{uploadDownloadBean.downloadTable} '"

  rowBandingInterval = "0" id = "t1".

  partialTriggers =': cb5: cb6: cb7: cb10 ">"

  < af:column id = 'c12' width = '0 '.

  headerText = "Download File" >

  < af:commandButton text = "#{row.bindings.FileName.inputValue}" id = "cb23" > "

  < af:fileDownloadActionListener

  filename = "#{row." Bindings.FileName.inputValue}.

  Method = "#{uploadDownloadBean.downloadFile} '"

  contentType='"#{row.bindings.MimeType.inputValue}"'/ >

  < / af:commandButton >

  < / af:column >

  < / af:table >

  < / af:table >

  User, because the two tables have a relationship, we call matter detail relationship, you can use a link view defining the relationship, and the framework will be the selection detail for you automatically.

  The next thing is that you can not put a table in a column of a table. This is not supported by the table component. You can use a picture of the tree for this, or tables cascading as I show in JDeveloper 11.1.2.1: cascade Tables | JDev & ADF Goodies

  Timo

• Article 059 (filter how-to ADF related tables by date range) in JDeveloper 12 c (12.1.3)

  Hello.

  I try to implement a solution to article 059 (filter how-to ADF related tables by date range) in JDeveloper (12.1.3) 12 c but hothing happen when I start this example.

  Could someone advise me what to do to make this example work properly on JDeveloper 12 c?

  I made the example work again. The problem is that you can't somehow store new attribute values in the card more. If you store the values for the filter to a different place, it works again.

  Please read the complete solution in my blog https://tompeez.wordpress.com/2015/04/11/how-to-filter-adf-bound-tables-by-date-range-jdeveloper-12-1-x/

  You can download the workspace of GitHub. The link is provided at the end of the blog.

  Timo

• Panel request ADF with Table does not work

  I am simple search.jsf of JSF page. In the search.jsf , I have an ADF search form. I drag and drop the view criteria into the Panel Query ADF with Table. The user search result will be displayed in a table ADF. The View object is simple no LOVs no variable binding even no where clause.

  
  

  
  

  Everything works fine if I run the page separately not with in the workflow. But if I turn the page with in a workflow, the search engine does not work.

  The workflow structure is simple, it has towed home.jsf and search.jsf pages and there is a control of navigation of the home page to the Search page. The problem is that the search engine is not work IE when I press the default search key that doesn't come with the form no coming on the data table.,.

  
  

  I use Jdeveloper with ADF technology 11.1.2.3
  

  My God, what a ridiculous and foolish.

  Partial trigger is missing.

  I have to add the id of the request to the partial trigger on the table. I thought that his coming by default to search forum.

  What a waste of time...

• Loading the main page halfway when Firefox starts - all other elements as the bar side and toolbars is loading properly. Height adjustment manually retains the setting for navigation all in session but don't remember setting when closing down.

  Height adjustment manually retains the setting for navigation all in session but does not remember to reset when closing down.
  Something was clicked inadvertently, but don't know what or how as Firefox worked fine a couple of days. Version 3.6.3. Help please

  Positions and sizes of windows are stored in localstore.rdf in the profile folder.

  Localstore.RDF to remove or rename the localstore.rdf.sav file in the profile folder to test whether the file is corrupted.
  
  See http://kb.mozillazine.org/Corrupt_localstore.rdf
  
  (attention: do not delete the localstore.rdf file in the Firefox program installation folder)

  Note:
  
  Delete the localstore.rdf file will reset the default toolbar customizations.
  
  You can rename "localstore.rdf' to 'localstore.rdf.sav' to test whether what it solves.
  
  Then, you can restore the customization by copying "localstore.rdf.sav" to "localstore.rdf" if she did not.

• "Media Center Receiver service has encountered a problem and the need to close"

  "Media Center Receiver service has encountered a problem and the need to close" I had to do a Windows XP system restore since then I continue getting the error message appearing all the time. How can I disable this message?

  Hi Keith,

  What is your level of service pack?

  Let's try the following: How to configure Windows XP to start in a "clean boot" State. This could help us eliminate third-party applications that may cause a conflict.

• How to clear the selection on an ADF faces table?

  I thought I'd call setSelectedRowKeys (null) gives the desired result. However it is not. Can you think of a reason why it would not clear the selection? What should I do?
  
  Here's the specific scenario:
  
  I have a two ADF faces table tell A and B with a column each and both of them have simple lines and their rowSelection property is set to "single". Now the requirement is when a line is selected from A, it must clear all selections of B and vice versa. So I registered selectionListeners on the tables and the code that is running inside this method does the following for the table has not been selected :
  
  tablenNotSelected.setSelectedRowKeys (null);
  
  lets say, I click on a first line, then on a row of B. So far so good. So if I click on the A, the control won't to the SelectionListener method. I think that SelectionEvent isn't getting fired no doubt because the previous selection has not been erased.
  
  JDev version I use is JDEVADF_MAIN_GENERIC_121113.1351.6521
  
  What I'm missing here?
  
  Published by: 981525 on January 23, 2013 08:20

  try to add addPartialTarget (table) after you turn off the selection.

• issues table: table height <>- line

  Hello

  (1) I'll put the height of a table by using the ATTR_NUM_VISIBLE_ROWS attribute. A typical result is shown in the attached picture

  

  As seen, there are extra height between the lowest rank and the table frame, or, phrased differently, there is the visual appearance of a double line. In my opinion, this is not consistent (there is no line left or right twice...) and must be changed: don't shoot no bottom line for the rank lowest and consequently reduce the height of the table.

  Or is it possible to avoid this problem?

  (2) another optical bug: the bottom line of lines and line labels is drawn inconsistently, too, refer to the figure of gridview OR sample:

  

  As you can see the black line of the lines below is the gray lines of the labels line

  Thanks, Wolfgang

  Yup - we'll fix the first issue as well.  I have reported this bug ID 310781.

  NickB

  National Instruments

• Text entry in the Table, height of automatic resizing to insert content

  I have a table with a variety of components inputText several rows, most of them with the attribute @row the value 2.
  
  However, one of these fields has sometimes wordy content. Is it possible to configure the component InputText AutoSize himself (and line) at a height that displays the entire contents without scroll bars? In other words, is there a way to set the text box/column/table, so that the height of the text in each line box auto-tailles to display all content.
  
  I am aware of a brute force method to set line attribute of the 10 inputText; However, since most of the time the text can be inserted into the 2 or 3 rows, assigning 10 wastes a lot of real estate.
  
  Have tried to define different properties without luck anl - this is the current definition of the InputText and the column that contains:
  
  

  <af:column sortProperty="Definition" sortable="true"
                           headerText="#{bindings.NamesBatchApproveVO1.hints.Definition.label}"
                           id="c9" width="450" inlineStyle="height:inherit;">
                  <af:inputText value="#{row.bindings.Definition.inputValue}"
                                label="#{bindings.NamesBatchApproveVO1.hints.Definition.label}"
                                required="#{bindings.NamesBatchApproveVO1.hints.Definition.mandatory}"
                                columns="#{bindings.NamesBatchApproveVO1.hints.Definition.displayWidth}"
                                maximumLength="#{bindings.NamesBatchApproveVO1.hints.Definition.precision}"
                                shortDesc="#{bindings.NamesBatchApproveVO1.hints.Definition.tooltip}"
                                id="it4"
                                rendered="#{row.bindings.Definition.inputValue != null}" simple="true"
                                wrap="soft" rows="3">
                    <f:validator binding="#{row.bindings.Definition.validator}"/>
                  </af:inputText>
                </af:column>

  Using 11g.
  
  Thanks for your help.
  
  Published by: user757151 on November 15, 2012 11:12

  See that Frank's article: https://blogs.oracle.com/jdevotnharvest/entry/gotcha_when_using_javascript_in

  AP

• N00b question - setting Table height

  I have a table inside a layer, I want to put this table to have let say 10 columns and I want the height of the entire table to 100 px.
  What is happening is that the table does not change its size, what is happening, it is that the table is bigger then the div itself in the page.
  
  So how to change and limit the height of the table as I want?
  
  

  Hmmm.

  Best suggestion at this point may be to search the archives. I have
  don't ' know not whence these models 'Halo', but they seem to be
  very popular and also seem a little difficult to customize. I've seen a lot of posts
  has this respect, and I don't ' know not, but perhaps the answer is already
  waiting in the archives.

  The archives can be found here:

  http://groups.Google.com/group/Macromedia.Dreamweaver
  http://groups.Google.com/group/Macromedia.Dreamweaver.AppDev

  Try looking through the archives, if that is not ' fix you, after return.

  For your question, you can't set a height for the table. A table will be extended to
  show everything that is inside.

  You can control the height of the div, and if the div expands to show the content.
  or hides the content that passes over. This is set with the overflow:
  attribute (show/hide/auto).

• problem of height full-screen

  I have a problem with the page layout in height between a laptop (screen 14 "") with the desktop PC (screen 22 ''). That is why I have created a rectangle the size of 980 px as my house top, I give him an anchor, then I create a button 'scroll' to go to the next section, and it looks perfect on the computer desktop (screen 22 ""). But when I open it on my laptop (screen 14 ' ') becomes truncated, the button is not visible. I want to be that the height a full screen whenever I open it on desktop PC, computer, laptop, tablet or phone. -What can anyone help me solve this problem?

  If this page was nothing more that a landing page, there is a very simple solution:

  Set the background fill of browser image and define all the substantive elements as objects of footer.

• Tables - height of row and cell INSET

  I'm working on ascript to do the following:

  1 put the first row of every table in my doc on these parameters:

  • Height of row = .25in
  • Top and bottom Inset = .04in

  2. put the rest of the cells in these settings:

  • Row height = .12in
  • Top and bottom Inset = .12in

  Here is where I am:

  app.activeDocument.stories.everyItem (). tables.everyItem (Rows) [0] .height = ".25 in."

  app.activeDocument.stories.everyItem (). tables.everyItem () .topInset of Rows [0] = '.04 in. "

  app.activeDocument.stories.everyItem (). tables.everyItem () .bottomInset of Rows [0] = '.04 in. "

  for (x = 1; x < app.activeDocument.stories.everyItem (). tables.everyItem (). rows.length; x ++) {}

  app.activeDocument.stories.everyItem (). tables.everyItem () Rows [x] .height = ".12 in."

  }

  for (x = 1; x < app.activeDocument.stories.everyItem (). tables.everyItem (). rows.topInset; x ++) {}

  app.activeDocument.stories.everyItem (). tables.everyItem () Rows [x] .topInset = ".12 in."

  }

  for (x = 1; x < app.activeDocument.stories.everyItem (). tables.everyItem (). rows.bottomInset; x ++) {}

  app.activeDocument.stories.everyItem (). tables.everyItem () Rows [x] .bottomInset = ".12 in."

  }

  I get this error message and I'm stuck.

  

  Anyone see anything that would be useful?

  Thanks in advance.

  Indeed there is a parenthesis of additional locking on this line in the screenshot (but not in your lines of the sample).

  I wonder if this construction

  for( x = 1; x < app.activeDocument.stories.everyItem().tables.everyItem().rows.length ; x++ ) {
  app.activeDocument.stories.everyItem().tables.everyItem().rows[x].heig ht = ".12 in";
  }
  

  each could work... For... loop expects a number of end-simple but you feed it with a table of all the lengths of line of the individual tables.

  If this does not work turn around your script. All the heights of line and the boxes using the value

  app.activeDocument.stories.everyItem().tables.everyItem().rows.everyItem().topInset = ".12 in";
  

  and after this, run the lines to make the adjustments of the top row.

  (Use 'Advanced editor' to be able to define syntax highlighting Javascript-, it makes your code a little more readable).

• Flex 3 problem UITextField height and layout

  Hello

  I use Flex 3 SDK 3.2.

  I have problems of determination of the height of a UITextField. (Unfortunately, I have to use the UITextField because I'm using FlashEff 2.0) "Otherwise, I would use a different component).

  I have a UITextfield multiline and wordWrap. The text is taken from a database, the length varies. I have a radioButtonGroup under the UITextField.

  My goals are:

  (a) to prevent the UITextField hit the radioButtonGroup VBox.

  (b) I want to change the position y the radioButtonGroup based on the height of the UITextField.

  (c) the TitleWindow height should be variable. The UITextField and the radioButtonGroup are a TitleWindow. I would like to change the height of the TitleWindow based on the content inside.

  At the moment, I have put y radioButtonGroup on the TitleWindow downwards, so that the content of the UITextField overlaps. But, when he doesn't are too much text in the UITextField, I get a huge gap between the radioButtonGroup VBox and her.

  I Googled, and from what I can tell, the height of the UITextField behaves strangely.

  Anyone know how to fix this?

  I create the UITextField like this:

  public var tf:UITextField = new UITextField;
  

          tf.autoSize = TextFieldAutoSize.LEFT;
       tf.embedFonts = true;
       tf.multiline = true;
       tf.text = myText;
       tf.width = 440;
       tf.wordWrap = true;
       var myFormat:TextFormat = new TextFormat;
       myFormat.size = 25;
       myFormat.blockIndent=53;
  
       this.addChild(tf);
       tf.validateNow();
       tf.setTextFormat(myFormat);
  

  My VBox looks like this:

  <mx:VBox  id="radioVBox" x="180" y="220">
       <mx:RadioButtonGroup id="myRadioButtonGroup" itemClick="goClickHandler(event);"/>
       <mx:RadioButton  groupName="myRadioButtonGroup" label="A"  fontSize="17" />
       <mx:RadioButton  groupName="myRadioButtonGroup" label="B"  fontSize="17" />
       <mx:RadioButton  groupName="myRadioButtonGroup" label="C"  fontSize="17" />
       <mx:RadioButton  groupName="myRadioButtonGroup" label="D"  fontSize="17" />
       <mx:RadioButton  groupName="myRadioButtonGroup" label="E"  fontSize="17" />
  </mx:VBox>
  

  And it's all wrapped up in a TitleWindow that looks like this:

  <mx:TitleWindow xmlns:mx="http://www.adobe.com/2006/mxml" 
       layout="absolute" 
       width="520"  
          height="450"
          verticalScrollPolicy="off" 
       horizontalScrollPolicy="off" 
        >
  
  

  Any suggestions?

  Thank you.

  -Laxmidi

  Can you put the text field in the VBox, above the radio buttons? The VBox expected

  resize and adjust accordingly.