AF:table height

Similar Questions

• Fixed table height

  Hello
  
  I create a model where I need a size of fixed table height.
  For example: I need a table with 10 rows. If I have enough data to fill in these lines, they should be printed virgins.
  
  I saw in other threads that there is a way to limit the no. lines using <? for each: TAGNAME [position () < 10]? > in the first and the last field in the table. However, I have a different situation. In the same table, I have 2 different repeating groups - used in the 1st row and 2nd in the next line. So, I won't be able to use this function before the 1st row and end after the 2nd. If I use it only on a single group, I can't limit the total no. 10 lines. How can I accomplish this?
  
  Also, when I used this position() on the first line for testing, data came out white. Help, please.
  
  Thank you!

  Make sure your Inbox sent the sample to fill line up to 10.

  used below logic

  .... in a row in your table - need get the number of front-line and save it in a variable

  next to your table row

  <10?>............. -this complete lines if the number above is<>

• issues table: table height <>- line

  Hello

  (1) I'll put the height of a table by using the ATTR_NUM_VISIBLE_ROWS attribute. A typical result is shown in the attached picture

  

  As seen, there are extra height between the lowest rank and the table frame, or, phrased differently, there is the visual appearance of a double line. In my opinion, this is not consistent (there is no line left or right twice...) and must be changed: don't shoot no bottom line for the rank lowest and consequently reduce the height of the table.

  Or is it possible to avoid this problem?

  (2) another optical bug: the bottom line of lines and line labels is drawn inconsistently, too, refer to the figure of gridview OR sample:

  

  As you can see the black line of the lines below is the gray lines of the labels line

  Thanks, Wolfgang

  Yup - we'll fix the first issue as well.  I have reported this bug ID 310781.

  NickB

  National Instruments

• Text entry in the Table, height of automatic resizing to insert content

  I have a table with a variety of components inputText several rows, most of them with the attribute @row the value 2.
  
  However, one of these fields has sometimes wordy content. Is it possible to configure the component InputText AutoSize himself (and line) at a height that displays the entire contents without scroll bars? In other words, is there a way to set the text box/column/table, so that the height of the text in each line box auto-tailles to display all content.
  
  I am aware of a brute force method to set line attribute of the 10 inputText; However, since most of the time the text can be inserted into the 2 or 3 rows, assigning 10 wastes a lot of real estate.
  
  Have tried to define different properties without luck anl - this is the current definition of the InputText and the column that contains:
  
  

  <af:column sortProperty="Definition" sortable="true"
                           headerText="#{bindings.NamesBatchApproveVO1.hints.Definition.label}"
                           id="c9" width="450" inlineStyle="height:inherit;">
                  <af:inputText value="#{row.bindings.Definition.inputValue}"
                                label="#{bindings.NamesBatchApproveVO1.hints.Definition.label}"
                                required="#{bindings.NamesBatchApproveVO1.hints.Definition.mandatory}"
                                columns="#{bindings.NamesBatchApproveVO1.hints.Definition.displayWidth}"
                                maximumLength="#{bindings.NamesBatchApproveVO1.hints.Definition.precision}"
                                shortDesc="#{bindings.NamesBatchApproveVO1.hints.Definition.tooltip}"
                                id="it4"
                                rendered="#{row.bindings.Definition.inputValue != null}" simple="true"
                                wrap="soft" rows="3">
                    <f:validator binding="#{row.bindings.Definition.validator}"/>
                  </af:inputText>
                </af:column>

  Using 11g.
  
  Thanks for your help.
  
  Published by: user757151 on November 15, 2012 11:12

  See that Frank's article: https://blogs.oracle.com/jdevotnharvest/entry/gotcha_when_using_javascript_in

  AP

• ADF problems Table height. Need to auto height adjustment.

  Hi all
  I have a picture of the ADF. But its height is now adjusted automatically according to the number of lines.
  Regardless of the number of lines, the height is fixed. It leaves a huge part of the empty space if there are a few lines, or it has a scroll bar if they are too many.
  
  Here is the UI http://www.flickr.com/photos/84002714@N05/7692948244/
  and I would like to have all the lines that have been displayed with no additional white space or the scroll bar.
  
  My table is

   <af:table value="#{bindings.ConnectorWSEndPoints11.collectionModel}"
                                                    var="row"
                                                    rows="#{bindings.ConnectorWSEndPoints11.rangeSize}"
                                                    emptyText="#{bindings.ConnectorWSEndPoints11.viewable ? 'No data to display.' : 'Access Denied.'}"
                                                    fetchSize="25"
                                                    rowBandingInterval="1" id="t4"
                                                    columnStretching="last"
                                                    styleClass="AFStretchWidth"
                                                    visible="true" width="800"  />

  The structure is

  <af:panelStretchLayout id="psl2" >
          <f:facet name="center">
                   <af:panelFormLayout id="pfl1">
                            <af:panelLabelAndMessage label="#{rscBundle.WEB_SERVICE_END_POINTS}">
                                          <af:table ...>
  //closing tags

  And the myjdev version is 11.1.1.6.0
  
  Thanks to you all!

  Use the property autoHeightRows of the table:
  http://andrejusb.blogspot.com/2011/06/ADF-11g-R2-improvement-ADF-table.html

  http://jdevadf.Oracle.com/ADF-richclient-demo/docs/tagdoc/af_table.html

• Tables - height of row and cell INSET

  I'm working on ascript to do the following:

  1 put the first row of every table in my doc on these parameters:

  • Height of row = .25in
  • Top and bottom Inset = .04in

  2. put the rest of the cells in these settings:

  • Row height = .12in
  • Top and bottom Inset = .12in

  Here is where I am:

  app.activeDocument.stories.everyItem (). tables.everyItem (Rows) [0] .height = ".25 in."

  app.activeDocument.stories.everyItem (). tables.everyItem () .topInset of Rows [0] = '.04 in. "

  app.activeDocument.stories.everyItem (). tables.everyItem () .bottomInset of Rows [0] = '.04 in. "

  for (x = 1; x < app.activeDocument.stories.everyItem (). tables.everyItem (). rows.length; x ++) {}

  app.activeDocument.stories.everyItem (). tables.everyItem () Rows [x] .height = ".12 in."

  }

  for (x = 1; x < app.activeDocument.stories.everyItem (). tables.everyItem (). rows.topInset; x ++) {}

  app.activeDocument.stories.everyItem (). tables.everyItem () Rows [x] .topInset = ".12 in."

  }

  for (x = 1; x < app.activeDocument.stories.everyItem (). tables.everyItem (). rows.bottomInset; x ++) {}

  app.activeDocument.stories.everyItem (). tables.everyItem () Rows [x] .bottomInset = ".12 in."

  }

  I get this error message and I'm stuck.

  

  Anyone see anything that would be useful?

  Thanks in advance.

  Indeed there is a parenthesis of additional locking on this line in the screenshot (but not in your lines of the sample).

  I wonder if this construction

  for( x = 1; x < app.activeDocument.stories.everyItem().tables.everyItem().rows.length ; x++ ) {
  app.activeDocument.stories.everyItem().tables.everyItem().rows[x].heig ht = ".12 in";
  }
  

  each could work... For... loop expects a number of end-simple but you feed it with a table of all the lengths of line of the individual tables.

  If this does not work turn around your script. All the heights of line and the boxes using the value

  app.activeDocument.stories.everyItem().tables.everyItem().rows.everyItem().topInset = ".12 in";
  

  and after this, run the lines to make the adjustments of the top row.

  (Use 'Advanced editor' to be able to define syntax highlighting Javascript-, it makes your code a little more readable).

• N00b question - setting Table height

  I have a table inside a layer, I want to put this table to have let say 10 columns and I want the height of the entire table to 100 px.
  What is happening is that the table does not change its size, what is happening, it is that the table is bigger then the div itself in the page.
  
  So how to change and limit the height of the table as I want?
  
  

  Hmmm.

  Best suggestion at this point may be to search the archives. I have
  don't ' know not whence these models 'Halo', but they seem to be
  very popular and also seem a little difficult to customize. I've seen a lot of posts
  has this respect, and I don't ' know not, but perhaps the answer is already
  waiting in the archives.

  The archives can be found here:

  http://groups.Google.com/group/Macromedia.Dreamweaver
  http://groups.Google.com/group/Macromedia.Dreamweaver.AppDev

  Try looking through the archives, if that is not ' fix you, after return.

  For your question, you can't set a height for the table. A table will be extended to
  show everything that is inside.

  You can control the height of the div, and if the div expands to show the content.
  or hides the content that passes over. This is set with the overflow:
  attribute (show/hide/auto).

• Reduce the height of a row or a table (was: so this does not not the case...)

  I'm a guy who likes to understand things for me and have browsed the web for the last 2 days, but can't seem to even approach an answer. I am extremely frustrated.

  Where to insert a table, or import a spreadsheet or tabular information, I cannot draw down the line or table height, beyond a some point. No matter what I try: CSS, properties of cell, manages... nothing. Help, please.

  I have no problem setting the width of tables and cells, but cannot, for the life of shorten me the line height to where I need it.

  In addition, each tutorial I read/seen that inserts a table shows the newly imsetred table with a height of normal line... barely higher then the text itself. In mine, the height of my cells is perhaps 5 times more than what I need it to be. I can't diminish for the life of me.

  The Web page is www.yptusa.com/btp_itinerary.html

  Thanks in advance for any help that anyone can give me.

  JR

  In http://www.yptusa.com/CSS/btp_itinerary.css

  * {

  padding: 0px;

  margin: 0px;

  background-repeat: no-repeat;

  height: 100px;

  background-position: center;

  background-color: #f5f5f5;

  }

  the picker wildcard (*) applies to each tag and it contains the definition of the cells in table to 100px from the top.

• How can I control the height of an af:table

  I want to do something like this:
  
  < af:table LignesMax = '10' / >
  
  If my table 3 ranks table height is 50px for example, if the size exceeds 10 rows, a scroll bar is automatically added.
  
  How can I do this using Adf Faces?
  
  OBS.: The LignesMax parameter is supported for many other executives, ADF, I can't find something like this.
  
  Thank you.
  Victor Jabur

  Set autoHeightRows = "20"<>

  Kind regards
  Kiran kristelle

• the selection of lines handling af:table

  Dear all,
  
  I have a table of the ADF, when the line is selected, then I want to get the content of the current line, to run logic...
  I have following code but in the fact that it only returns the contents of the first line...
  < inlineStyle = af:table ' height: 200px; "width ="100% "value =" #{bindings. " Var Entries_VO1.collectionModel}"="row ".
  lines = ' #{bindings. " Entries_VO1.rangeSize}.
  emptyText = "#{bindings." Entries_VO1. Viewable? "{'No data to display.': 'Access Denied.'}".
  fetchSize = "#{bindings." Entries_VO1.rangeSize}.
  rowBandingInterval = '0 '.
  filterModel = "#{bindings." Entries_VO1Query.queryDescriptor}.
  queryListener = ' #{bindings. " Entries_VO1Query.processQuery}.
  filterVisible = "true" varStatus = "vs."
  selectedRowKeys = ' #{bindings. " Entries_VO1.collectionModel.selectedRow}.
  selectionListener = "#{backingBeanScope.main.tableRowSelected} '"
  rowSelection = "single" id = "t1" >
  
  {} public void tableRowSelected (SelectionEvent selectionEvent)
  Add the code in the event here...
  RowKeySet rs = selectionEvent.getAddedSet ();
  Iterator it = rs.iterator ();
  DCBindingContainer links =
  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
  DCIteratorBinding = empIter
  bindings.findIteratorBinding ("Entries_VO1Iterator");
  RowSetIterator empRSIter = empIter.getRowSetIterator ();
  While (it.hasNext ()) {}
  Key = (Key) ((List) it.next () .get (0);
  Line currentRow = empRSIter.getRow (key);
  System.out.println (CurrentRow.GetAttribute ("XmlContent"));
  }
  
  }
  
  in the above code I selectionListener "# {bindings." Entries_VO1.collectionModel.makeCurrent}"to the one above.
  
  and also, when the page first loads everything, I want the rows in the table deselection...
  
  Could someone help me with this please...
  
  -Thank you.
  Kind regards.
  
  jdev version: 11.1.1.4.0
  
  Published by: Santosh Vaza on March 7, 2011 15:40

  Thanks nini! Your solution worked for me.

• Table scrollbar?

  Hello

  Can someone tell me if this is possible and maybe point me in the right direction

  I want a table height 360px with lets say 10 rows and 1 column.

  I want to have a picture of 50px maybe on the left side of each line which will be a link, and on the side right of the image in the same line, I want the descriptive text, exactly as if it were in the image

  Now the big question is I like about 5 of these lines to be visible, and the 5 others, I want to be visible when you scroll down, so the table scrolls down

  Can you please tell me if this is possible in Dreamweaver, and how do I go on the insertion of the scroll bar so that the entire table scrolls down?

  

  With CSS.  Wrap your table within a division of style.

  CSS:

  {#scrolling}

  height: 150px; / * adjust to suit * /.

  overflow: auto;

  }

  HTML:

  your table goes here

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  www.Alt-Web.com/
  www.Twitter.com/ALTWEB
  www.Alt-Web.blogspot.com

• What makes this look pretty - use tables.

  I'm having some difficulty with the tables on my page.  As you can see, I have two tables that compare the standard amenities for the extras included with the condominium.

  http://test.taffyproductions.com/Interior.htm

  I put the table how I wish, but they seem rather low.  I wish that the items listed to appear more closely together in regard to height and have the title of each table to be further above vertically than now.

  I played with the properties of the row for the table height in my CSS rules, and I can't get the list items to stack more closely and have titles for each table to be still far away.

  I was also thinking to have the page to display as a grid... is it possible?

  All the other tips on making look more uniform and more professional would be great!

  Thank you!

  Gary

  First off you need to solve this problem - there are two body tags:

  
  

  Change them to this:

  To answer your question, I'd do it (a) put an id on this table (I chose "list") (b) suggest to each column in a td unique rather than having each item in its own td, as follows:

  
     
     
       
       
       
       
     
   

  Standard equipment

  Full           Kitchen Microwave oven           Oven Phone Coffee machine

  Internet high speed         Lanai - bridge         Mixer         Bed deported

  In-room safe         Ceiling fans         Security 24 hours         Free parking

  Dining table for 6         Dishwasher         TV         Iron and ironing board

  Note my cell widths are wrong - you'll have to play with them.

  Then add this css to css file main yoru:

  table #lister ul {}
  margin: 10px;
  padding: 0px;
  list-style: none;
  }
  table #lister caption {}
  padding-bottom: 12px; / * to adjust the spacing of the table legend * /.
  }
  table #lister li {}
  margin-bottom: 4px; / * to adjust the spacing between list items * /.
  padding: 0px;
  }

  table #lister td {}
  vertical-align: top;
  }

  I have not test it work with your file css instead, there will be other adjustments, but this will give you a good start.

  --

  
  E. Michael Brandt
  
  www.divahtml.comwww.divahtml.com/products/scripts_dreamweaver_extensions.phpStandards-compliant scripts and Dreamweaver Extensions
  
  www.valleywebdesigns.com/vwd_Vdw.aspJustSo PictureWindowJustSo PhotoAlbum, et alia
  
  --
  

• height in feet + inch

  Hello
  
  I have the table and the data as below...
  
  CREATE TABLE HEIGHT (FEET NUMBER (2), PO NUMBER (2), NAME VARCHAR2 (6));
  
  INSERT INTO VALUES(3,1,'JOHN') OF HEIGHT;
  INSERT INTO VALUES(3,7,'SMITH') OF HEIGHT;
  INSERT INTO VALUES(3,0,'MILLER') OF HEIGHT;
  INSERT INTO VALUES(5,2,'SCOTT') OF HEIGHT;
  INSERT INTO VALUES(5,8,'KING') OF HEIGHT;
  INSERT INTO VALUES(6,6,'TIGER') OF HEIGHT;
  INSERT INTO VALUES(6,7,'SYS') OF HEIGHT;
  INSERT INTO VALUES(6,6,'LUISE') OF HEIGHT;
  INSERT INTO VALUES(7,0,'CAT') OF HEIGHT;
  INSERT INTO VALUES(7,5,'MAT') OF HEIGHT;
  INSERT INTO VALUES(7,9,'RAT') OF HEIGHT;
  INSERT IN THE VALUES(3,4,'') HEIGHT.
  
  SELECT * FROM HEIGHT IN FEET, INCHES
  
  
  now, I want retrieve date of 5.2 to 7.5.
  Here begins 5 feet and 2 inches
  and 7 sends feet and 5 inches

  Try:

  select *
  from   height
  where  (feet||inch) between (5||2) and (7||5);
  

• Table of positions in different browsers is not correct

  Hello
  
  Again, I have a problem with to make my site compatible with IE7 and Firefox. I created a gallery page with a table containing the thumbnails photos. It seems like it should be in Firefox, but seen in IE7, it is not not in the centre.
  
  The page can be found here:
  
  http://www.martingreshoff.co.UK/Free_Standing_Furniture_Gallery.html
  
  I have included the code in the case where this assistance. Any help in getting it works correctly in both browsers would be much appreciated.
  
  Thank you
  Martin

  Its good enough that I have you asked to do earlier.
  Here is the code for the table with images.

  
  
  
  
  
  
  
  

  <>
  height = "12" >

  
  
  
  
  
  
  
  
  

  <> SRC = "Resourses/Free standing furniture size pictures/thumbnails/library Size - Thumb.jpg"width ="105"height ="146"border = '0' well ="#Map7">			width = "136" height = "97" border = "0" align = "bottom" well = "#Map6" >	Case.html"> border = "0" well = "#Map9" >
  Width = "105" height = "146" border = '0' well = "#Map3" >	height = '97' border = '0' well = "#Map2" >		width = "136" height = "97" border = '0' well = "#Map5" >	height = "146" border = '0' well = "#Map4" >

  Changes to your code:
  -Deletion of table height (you can keep it, but its an invalid attribute and)
  should not be used. The height of the table will be as much as the cells need. The
  table does not content hold, there are cells that hold content and therefore the
  height should be of the cell)
  -Added height = "242" to the first cell in the second line of images. Since
  all cells in this line have the same height, so set it to a single cell
  must ensure that other cells expand to that height as well.
  -Removed

  and closing
  Tags for cells of
  the first line of images. It is not necessary that the cell of table align = "center" and
  VAlign = "bottom" is sufficient to align the images. The div is an extra
  a container that is not necessary here.

  In fact, if you add just the height = "242" to one of the cells of the
  second row of images, which should do what you need. The other changes are more
  code cleanup.

  I still insist once you change the names of files and folders
  so they have no space in the name. If you do not, it
  will have problems at some point in time.

  Other changes as I explained in the previous code would be useful if you
  you want to do.

  --
  You can't lose until you quit!
  ...........................................................
  "greshoff" wrote in message
  News:eqih39$8kj$1@forums. Macromedia.com...
  > Yes it works exactly as it should. AS you might be able to tekll I'm
  > very
  > new to Dreamweaver. Could you explain in very simple, step by step
  > instructions
  > How to get to this result.
  >
  > Thank you
  > Martin
  >

• Height of the disconcerting cells

  Hello
  Forgive my ignorance. For the life of me I can't understand why this cell of a row in the Table height seems to be out of control. "If you go to my site please look at the white line with ' Rushton farm ' and the text to the right. I want the rank at the same height as the image of the logo close Rushton, which is 157.
  
  http://www.wctrust.org/communityfarm/farm.html
  
  Thanks much for any help!

  Wait you will look at the page in anything other than IE! It's a real treat in
  Firefox.

  Your problem is related to the use of table cell splits and mergers to build
  This monolithic table. Please read this-

  http://apptools.com/rants/spans.php

  Changes in the form of a split/merged cell affect ALL cells of the
  table when you do this and it affects them in ways that you don't expect.

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  ==================

  "spraggini" wrote in message
  News:fqhaps$76C$1@forums. Macromedia.com...
  > Hi there,
  > Forgive my ignorance. I can't for the life of understand me why this
  > Cell of table row height seems to be out of control. If you go to my site
  > please
  "> Watch the white line with ' Rushton farm ' and the text to the right. I have
  > want to
  > This line at the same height as the image of the logo close Rushton, who is
  > 157.
  >
  > http://www.wctrust.org/communityfarm/farm.html
  >
  > Thank you very much for any help!
  >