Adjust the size of the brush with scroll wheel

Similar Questions

• Satellite P205D - how to adjust the volume with sensitivity control

  I was wondering if there was a way to adjust the sensitivity of the variable volume wheel.

  I noticed that in the turning point, I'll go to volume level 0 directly at the level of volume 4, which is quite frustrating, because I'm used to using a dial bound volume that will increase the volume of minor rotation 1 level of each instead of minor rotation 4 levels each.

  And with headphones this floating dial increases the volume of uneasy quiet. (my comfortable with headphones is between 1 and 2)

  Thank you
  -Talmru

  Hi mate

  To be honest I didn t notice such big difference using the volume control digital on my Satellite.
  I m not owner of the Sat P205 because this P205 is a model of Toshiba laptop and here in Europe, you will find only the P200.

  However, as I said above, I can adjust the volume with sensitivity and volume increases not rapidly from 1 to 4.
  Of course this new generation of volume controls works a little different than the volume controls current, old mechanics, but you should be able to affect the level of volume correctly.

  I put t know which driver sound and that Toshiba control you are using, but maybe you should check if the update might help you

  Good bye

• When I use my brush tool, it works very well unless I overlap the brush with another brush stroke.

  When I use my brush tool, it works very well unless I overlap the brush with another brush stroke. When this happens, it turns bright red. How can I fix this and put it on the default setting?

  Your brush is set to Hard Mix in the options bar.  Change this to normal and everything will be fine.

• How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly? Like I can't pin, I keep it at the top of the page with scroll effect 0. It collapse, shows the menu buttons but does not close back up once reached the

  How paste an accordion MENU navigation on a mobile scrollbar page and make it work properly?

  Like I can't pin, I keep it at the top of the page with scroll effect 0.

  It collapse, shows the menu buttons but does not close back once it reaches the anchorpoint.

  Appreciate your help. Thanks.Guess I need to find another solution. Am an artist and don't know anything about coding.

• "Zoom with scroll wheel" option missing PS CC 2015.1

  Before the update to Photoshop CC 2015.1.2 there was an option to Preferences > General "zoom with scroll wheel." However, after update this option disappeared.

  Here is a video of someone enabling this option in preferences using PS before the https://www.youtube.com/watch?v=cJy_Old5myg update

  Not only did this option disappeared, but many others did as well. Here is a screenshot 2 of before and after the update. Click on the screenshot to see the enlarged image.

  Before the update (more options):

  

  After update (less options, no scroll zoom):

  

  This option is in the category 'Tools' in your preferences.

  Gene

• adjust the tint with the paint brush tool?

  I have 2 good paintings together to appear like when hooked together. I like several colors in the two existing skies but just cyan edge seal on one of them is hue. Is there a way I can gradually adjust the hue of an area with a paint brush tool. In other words no paint on the texture.

  An adjustment layer tint effects uniformly a whole layer or a selection, not what I need. I want to use a diffuse brush or Airbrush to tease gradually in a color change where I want.

  Ideally, it would be surprising if I could adjusted the tint of end target so once the image reached this color it would interrupt being adjusted no matter if I continued to paint.

  I suspect one of the dozen or so list drop-down MODE options like normal, color dodge, saturation... could do but nothing with that I've experienced seems to do.

  Is this possible?

  Barry

  Use the Bush set to color.

  Example of the color box.

  Opacity allows to get the desired color.

• CHANGE of SIZE of the BRUSH WITH CTRL and alt KEYS

  Hi all

  I'm on the road with my new macbook, and I have a problem with setting up my wacom pen.

  At home I use an iMac with CS5 and to change the brush size, I press alt and CTRL key and move the pen left/tight up/down to size of chang and hardnes of the brush. I find it very convenient!

  On my new Macbook, I have CC and I don't have the ability to use this easy key combination, I was loking autour and some google, but I have found the place to get the same settings on my macbook.

  Is there anyone who can help me?

  Thank you very much.

  When you hold down Option/Alt + Control and left mouse click and drag anything happens?

  (the button on the pen is set to left click?)

  The Option/Alt key should always be the second key to the left of the SPACEBAR

  The control key must always be the third key to the left of the SPACEBAR

• Precise timestamp on the graph of the band with scrolling

  I have a user interface with a set of synchronized graphics that operate in mode scrolling stripchart.  The elevator of the x-axis is visible on one of the cards, and the operator has the ability to take a break from the update of this table (essentially locking the entrance to the chart) and scrolling in a bit of history.  The width of the graph is about one minute of data, the number of points has been set to allow about an hour to scroll of history.  Other maps which are synchronized with the main chart have the x-axis property nodes attached, so that they follow the scrolling of the main graphic.

  Everything works fine with the current configuration, except for one small detail: the timestamps.  I put date and time stamping visible on the x-axis of the main graphic, so that operators know exactly when any aberration in the data actually took place.  I have seen a few entries in how add real timestamp, but none of them seemed to work properly.  They work very well on a standard sight, but fail miserably once the scrolling action is activated, so I have to do something wrong.

  Any suggestions on the best way to get this accomplished timestamp?  It's absolutely crazy to me how much pain is to put a timestamp to the real real world in a graphic...  As someone who constantly defends LabVIEW against colleagues who claim that it is "too difficult" to use it, it's kind of embarrassing when a thing so simple becomes so complicated in LabVIEW!

  The short answer is that this is impossible with a graphic if you add the requirement to be able to take a break. The reason is simple - a chart stores data on its own, but it saves all the values of X - you give only values Y and for the X values he simply uses the index of the value and the most you can do is set a t0 and delta t for the X scale. This works normally, but does not work when you stop feeding data to the chart, because the value of X is not stored. I heard someone say once a waveform graph does not allow this, but I've never looked into it and I'm not sure that's true.

  What you can do is use a graphic instead of a chart - in a graph, you provide values X and Y for each point, so you can have absolute time for the x-axis values. The key point is that, to a chart, you must provide all the data to draw, you must maintain a circular buffer of the data yourself. You can do this by using a queue with loss, when you preview the queue to get the data, but there are also some examples online, as well as in the finder of the example, if you search for 'XY Chart'.

• Can not adjust the volume with the Fn keys

  Hello people,

  I have an Aspire laptop 5733Z and I love her dearly.  Recently, I lost the ability to adjust the volume using the Fn key keyboard shortcut with upward or down arrow keys.  I have uninstalled and installed the Realtek HD driver.  I called technicians to Answersby.com and they couldn't help.  Did anyone out there has had this problem and is there a solution.  Thank you for your assitance on it.  Ron

  [subject line changed to reflect the new topic]

  Thank you very much!  who did the trick!  Kudo!  It doesn't seem to be "* beep * island" now and goes off often.  Fix is quick and easy to make as needed.  Thanks for your help.  good luck finding a job.  Ron

• Automatically adjusts the brightness with the background of the window.

  This is a fairly long description of the question, but I tried to be as complete as possible (this looks like a minor problem but it's very embarrassing in the conditions I work often) I have a laptop Dell Inspiron under Windows 7 Home Premium, and I'm having a problem with the brightness of the screen. I was not able to locate any other positions, even with a similar problem:

  Windows automatically adjusts the brightness of the screen based on the background color of any windows is open. When the toggle between light/dark background brightness will increase or decrease respectively. This is unrelated to all conditions of lightning of the room, and I was able to nail that this occurs only when two conditions are met (but she she 100% reproducible in these conditions) 1. Laptop is running on battery and 2. the screen brightness slider is calibrated for lower brightness about settings up to about 30 to 40%.
  I tried to eliminate all possible variables that I can think of, including the diagnosis via msconfig startup. This automatic brightness adjustment occurs independently of the program or the window involved, but here's an example where I cut everything and simply alternate between the Windows desktop (including the black background value) and Windows Explorer (white background).
  EXAMPLE 1: Desktop (black) came, no agenda. I open Windows Explorer (white) and the brightness fades gradually more light for a period of 5 seconds, tick-tick-tick-tick-tick brighter. I reduce Windows Explorer (dark back) and the brightness fades gradually more dark, tick-tick-tick-tick darker. When working in a darkened room this very annoying constant increase or decrease the brightness. Note that the brightness slider is set to the minimum setting all this time (about 40% of the automatic erasure is more noticeable at the point of annoying, even if it is always present, but 40% is way too bright for a darkened room).
  EXAMPLE 2: I opened two tabs in Google Chrome or Internet Explorer (that happens for two and all the other programs besides), in a tab of the page Web has a dark background (grey/brick/whatever) while the other tab has a light background (white/yellow/whatever). As I switch between tabs brightness will decrease after the passage in the darker background and rise after the transition to the lighter background, tick-tick-tick-tick-tick discoloration with about 5 seconds each time.
  Since this only occurs on battery you need just a simple setting in Power Options, but I don't the do have not yet localized as and option. I would be grateful all the ideas, and I can provide more information if necessary. Two solutions would be acceptable
  (A) brightness remains constant at the level that I put it independently to know if the laptop is plugged in or on battery power.
  (B) brightness adjusts in a single 'jump' when switch between light/dark circles, rather than erasing more than 5 seconds.
  Thanks for your help

  In fact, after a lot of research and work of suggestions other people, I think I found a solution that works on my machine. (I'm saying I think because I shot to the top of a black web page, he gave way to the screen for a while and looked and seems not to reduce intensity, but I'm a little worried that it's just top-down influence and I just wanted to believe that I solved the problem...)

  Here's what I did (on my Toshiba);
  Control Panel > display > adjust the resolution
  Click on 'Advanced settings' (a small blue link in the drop-down "Orientation").
  Click on tab "Intel (R) Graphics and Media Control Panel"
  Graphics properties
  Power > power features
  Click the menu drop-down and select 'on battery '. Under this drop-down menu, there is a checkbox next to "Display Power Saving Technology" that only appears when "on battery" is selected. On my computer, the box has been checked. I've disabled, and who seems to have stopped the display to change the brightness according to the color of the window.
  I hope this works for some other people (and indeed works for me) - this seems to be a very rare but incredibly annoying problem for those of us who got it.

• where are the brushes with bristles in PS CC 2014?

  According to the documentation PS CC has brushes, but I can't find such labeled brushes and without UI elements to manipulate as stated in the adobe tv video: works with the new tricks of brush hair | Visual design CS5 | Adobe TV

  They exist? Where are they? And where the controls are described in the video? (which seems to be for PS CS5 btw)

  on my system it has by default several brushes advanced with the small brush icons: flat, blunt... dish etc.

  When you open the Panel the brush for one of those who have the brush icon, you can choose among 10 bristles different forms of qualities.

  If you do not have these brushes by default, maybe try to reset the brushes (right click on the Tools icon in the menu bar down arrow)

• Scroll the swf with scroll bar

  In a SWF, 1000 can x 1000, you only display 1000 x 500 and scroll the film with a scroll bar?

  If yes how?

  Thank you

  If your .swf is 1000 X 1000 and you only want part of it to be displayed in the browser, you can place the .swf in a div and set the height of the div to 500 pixels and then in css, set the div overflow: scroll

  -What are you looking for?

• Anyone having problems with scroll wheel zoom since the 12.1 update?

  Zoom in or out in the composition with my scroll wheel window is suddenly a very inconsistent process. I'm used to be able to scroll or back to a simple 'tick' of my scroll wheel. Now, it seems that sometimes one must a huge burst of scroll wheel to zoom in at all, and then of course it is difficult zoom with precision. Single ticks no longer seem to have any effect.

  AE 12.1

  Mac OS X 10.8.5

  This bug has been fixed in update after effects CC (12,2), which was released yesterday.

  Let us know how it works for you when you tried with the updated version.

• Connecting the frames with scroll

  

  I've created a scenario planner of the wall as shown above. The month and the content below are in a floating frame that scrolls back and forth. The problem I have is that when I scroll down, I lose the months. So, I wanted to know if there is a way to connect the 2 frames with scroll separated? Really it pasted it and am sure that's not possible, so thought I would ask experts.

  Thank you very much

  Steve

  I'm sorry but I don't have time for a long answer. If you read my post above, once again, you will see that you need create two moving images.

  1. just below the month set to vertical content.

  2. one that contains the first one grouped with the months set horizontally.

  Try it and tell us.

• Illustrator CC - Zoom with scroll wheel?

  I put Photoshop in place so that I can zoom in and out by using the arrow pad (not used, just scroll keys).

  I'm getting started with Illustrator, and I'll put up my workspace for its similar to what I have in Photoshop, but I can't seem to find the zoom with the mouse scrolling option!

  It is simply non-existent or just hard to find in Illustrator?

  I'm afraid that you have to press Alt/Option, d.