Administrator password is not allowing me to be a Director

Similar Questions

• Somehow my diary of the administrator password does not work, no disc reset

  original title: locked out! Help, please

  Somehow my diary of the administrator password does not work. I tried everyting. I use Windows Vista.

  I continue to be asked to provide a 'A' floppy to recover my password, but there is no floppy drive on my computer.  I have not configured a retreival diskette.

  I am not able to access all the programs that I installed as an administrator through the comments log in.

  I tried to re - install the complete operating system after no longer being able to access my programs and I am not allowed to do it either.

  I'm at my wit's end! Can someone please?

  Thank you

  Completely lost in cyber space.

  Hello AdrianaMonti,

  I'm sorry but the Microsoft forum rules do not help users circumvent passwords of Windows OS or software systems.

  I do not understand why you have problems with re-setup because it has nothing to do with your original administrator password. Your copy of Windows came pre-installed on your PC or did you buy a boxed copy and install it yourself?

  If you are unable to re - install probably you get error messages. What these error messages?

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Windows Vista, administrator password, does not

  I had the windows administrator password since I bought my laptop about a week, there is the password no longer works, (no one has changed the password). Finger printer reader, my impression, finger reads me the green check mark, and then displays the incorrect user name or password. Dell has no help nor Microsoft, called the two, both passes the question to the other. I have many family photos and some documents I want to turn off my computer, I can't get them because of the password, I bought a case that Dell said to do, it does not fit my hard drive. Can someone tell me how to bypass my password so that I can get at my photos or what I can do to at least get my photos in the admin account that is displayed in my full name. I tried to type in the command prompt, and nothing works, please any help, I would be so grateful... Dell and Microsoft told me, there's a way to get around, but they cannot help doing it on my own computer.

  Hello

  Donna I don't know how the fingerprint reader interacts with the opening of session if it is an assumption. This method
  works on systems without the reader of fingerprints and perhaps on your system when used in conjunction with
  your fingerprint reader. Hope it's useful.

  If this is not enough you are no worse off as you are now.

  Try this - use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK
  then go back and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times.
  Then fix the password in your usual account. Do not forget to leave your account administrator if you
  wish.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I've forgotten the administrative password can not do anything__

  adminastrative password

  adminastrative password

  We are not allowed to help users to bypass the password protection, regardless of what are "reasons".
  Here's the Microsoft Policy about this:
  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  What to do if you forget your Windows password
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password
  Excerpt:
  If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to connect to Windows and you will need to re - install.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I forgot the administrator password & can not reset in!

  • I changed the administrator password last week and now I forgot what it was. I can't access or change the password, or reinstall windows. It asks password each time. I do not have a password reset disk.
  • Another user is available

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Administrator password does not not under Vista

  I have a new desktop computer with Vista and have worked on getting it set up. I've set up user accounts, but my password of the administrator account does not work. I tried all the options and checked the capslock and even tried a few misspellings, even if I don't have a problem the first 4 or 5 times I had used it. is there anyway to reset it without having to reinstall Windows since I don't have a password reset disk?

  You did not account for additional user with administrative privileges? If this isn't the case, you will need to use a program like NTpasswd empty password for your account, so you can connect.

  Download the bootable CD .iso image file, burning with burning software, third party (as an image, not in the form of data), starting with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/~pnordahl/ntpasswd/

  Once you're back in the system, here are my suggestions for how to configure user accounts in Vista:

  You absolutely don't want to have only one user account. In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
  MS - MVP - Elephant Boy computers - don't panic!

• Administrator password is not not eligible

  Hello. I'm changing the settings of the user account on Dell Inspiron my daughter with Windows 7. Apparently, it is not recognizing my administrator password. How can I work around this problem, or reset the password? Thank you. Please keep language simple!

  You can try a number of things, please see the following articles:

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-the-hidden-administrator-account-on-Windows-Vista/

  Or: http://www.sevenforums.com/tutorials/507-built-administrator-account-enable-disable.html

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  Credit: Ronnie Vernon MVP

  If you have an installation of Windows 7 disk, see the following article.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  Unfortunately, beyond that we can not help you. Please review the following policies for these forums and Microsoft.

  Answers Support Forums password policy

  Keep secure passwords - Microsoft strategy on move the passwords

  Microsoft's official policy

  Microsoft's strategy concerning lost or forgotten passwords

• Keychain password does not allow me to download and publish on IProducer

  I keep getting a message that my keychain does not allow me to continue with IProducer to download my book on ITune Connect.

  I currently have four books in my account.

  Help, please!

  I tried everything that I was on demand at Apple, systems preferably, ICloud and keychain.

  Any other suggestions?

  Thank you

  Paula

  You have turned on two-factor authentication? If so, try turning it off? A bit of a nuisance, but it could allow you to go further until they fixed it.

• Insert smart card menu appears whenever I do an administrative function, does not allow me to type the admin password.

  How can I disable this, especially since I cannot perform admin functions.

  I have not knowingly implemented the functionality of smart card.   (Laptop Dell Lattitude Professional running W7 64-bit)

  I am the only user of this machine and the only person with a user profile.  It seems NO admin profile.

  You can post this request here:

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads

• my main administrator password is not letting me access my laptop?

  can someone help me as soon as possible! my main administrator is not be accessed through the password that I used and I need to access my files.

  Hello

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  In addition, technical support engineers Microsoft cannot help you recover passwords files and Microsoft who are lost or forgotten product features.

  Microsoft's strategy concerning lost or forgotten passwords

  http://support.Microsoft.com/kb/189126/en-us

  I also suggest you to perform the system restore and check.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  http://support.Microsoft.com/kb/940765/en-us

• My administrator password will not work although it is correct. SULUTIONS?

  I got my Fujitsu Amilo computer for three years with the same password. All of a sudden, I can't open my administrator account.

  The first time I came I went in as a different user and when I changed one more time, I could come.

  But now, that do not work.

  Majalisbet

  Hello

  This is the information from microsoft on you assist on passwords

  http://support.Microsoft.com/kb/940765

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• My Windows 7 Administrator password does not work

  My password worked before and I know the password. But it doesn't work anymore. I was told to remove the connection administrator to display icon making it inactive. Now, I can't login with the administrator account or the second user as an administrator. The imagined two message incorrect password. The two passwords are correct.

  I was not able to save the password initially as he needs to be to save to a floppy disk and I don't have a floppy drive. He could not save on cd or USB, so I never had a copy of it. I have the system repair disk, but I don't want to lose my programs.

  Your help is appreciated.

  Hard to say, but if you normally use an account to admin-level during your daily use, this means that you might have contracted a virus simply by visiting a site with an infected server.  When you solve it, make sure that you only use your admin account if you really need to take as administratively reconfigure your network.  In the course of normal daily use, use a non administrator account so that nothing can cause the admin account get accessible.

• My administrator password does not work (I forgot not it). What should I do to access log on as an administrator?

  3 people know the password and none of us were able to get. What can be done to reset the password or to get the password to be accepted? We have no install disc.

  1. make sure that shift caps lock is turned off.
  2. try a different keyboard.

  If that doesn't help, clear the password with NTpasswd.

  Download the bootable CD .iso image file, burn with third-party burning software such as free ImgBurn , Nero or Roxio. Burn as an image, not in the form of data. Start with the media that you have created. You need to maybe change the boot order in the BIOS or obtain a menu of boot command temporary with the pressure of a special key. NTpasswd will run. Follow the instructions carefully.

  http://home.eunet.no/pnordahl/ntpasswd/ MS - MVP - Elephant Boy computers - don't panic!

• Why my administrator password does not work?

  Whenever I try to remove or install a program, I received the message that I don't have administrator rights, then I have the password and then get an "access denied" message on my C: drive? What is going on? I am the administrator, too!

  Hello

  1. Have you logged as administrator?
  2. You did any recent changes?
  3. What is the exact error message you get?

  I suggest to start the computer in safe mode and check if the same question:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  It will be useful.

• Pavilion g4: administrator password does not work bangoura and and the deactivation of the system 85109974

  Please help me soon

  Hello

  You can use the link below to generate the BIOS password reset key. Enter the system code stop or the serial number of the device to generate a.

  or use the code to reset below

  30861370

  You can:

  1. use the unlock code you generated to enter BIOS

  2 disable all passwords that are enabled in the Security menu of BIOS.

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.