Adobe AIR - creates disk image does not open

Similar Questions

• Lightroom disk image does not open

  I downloaded the Lightroom 4.4 disk image twice (to the default download folder), but doesn't open on my Mac to Snow Leopard. I get a message that it is "not recognized".

  What is the cure?

  I'm guessing a corrupted download. If you have the correct file and you have unpacked it should install without problem on Snow Leopard.

• I downloaded adobe cc cleaner, but it does not open why?

  I downloaded adobe cc cleaner, but it does not open why?

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

• Edit an image from lightroom to photoshop... Image does not open.

  When I want to edit an image from Lightroom to Photoshop (CC), Photoshop opens, but the image does not work. However, I am still able to do with some images, but some images are simply no opening. This is the time of fisrt I have this problem.

  
  

  My version of photoshop is CS5 extended.

  
  

  I have Lightroom 6.0.

  
  

  I'm with P.C.

  
  

  Thank you
  

  Photoshop Cs5 will not open images Nikon D750

  You must use the version of Photoshop cs6/CC or DNG converter to be able to view these images in Photoshop cs5 in DNG

  Download DNG Converter:-Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.2

  Concerning

  Assani

• Disk Defragmenter does not open in Windows 7

  Since I started using Norton, Disk Defragmenter does not work and my computer is very slow. How can I me Defrag to work and to speed up my computer?

  There are 2 issues here:

  1 Defragmenter does not
  2 PC is slow.

  If the disk is very fragmented, it can cause the PC to run poorly, so let's handle defrag first and then we can look at the additional steps to speed it up.

  There are several reasons why the built-in Defragmenter may not work correctly:

  1. the disk is too full (you need at least 15% free space, sometimes 20%). Solution: Delete files unnecessary and programs until you have more than 20% free space.

  2. the disc is damaged and must be repaired. Solution:
  a. open "My computer" and right-click on the drive that you want to disable frag.
  b. Select 'Properties' and click on 'tools '.
  c. Select "Check now" to check the drive for errors.
  d. Select the two options and click on 'start '.

  (This can take time and can restart the PC so that it can do the check at boot time. Be patient and let it complete).

  3. There may be malware on the PC
  Solution - run the Antivrus, then Antispyware scans (can take a long time if ever made. Be patient):
  a. analysis of the entire system with the anti-virus & manage everything that exists;
  b. analysis of the entire system with Anti-Spyware & manage everything that exists;

  4. Disk Defragmenter can be altered, needing a system restore to fix it. Solution:

  a. start - all programs - Accessories - System Tools - System Restore (click here to open);
  b. Select a good restore point before you start having problems with Disk Defragmenter.
  c. start the restore process and let an end (descriptive name of something restore operation as "Repair Defrag").

  5. There are other programs that run the Defragmenter interruption integrated. Solution:
  a. close all running programs.
  b. If you think there may be some programs that run in the background.
  c. press Ctrl + Alt + Delete and
  d. Select "start Task Manager".
  e. under the 'Applications' tab, you will find a list of all running applications - you can close these by selecting "end task."

  6. If still no luck, try disabling the screen saver when you run Disk Defrag (you should very well leave the system only when running the built-in defragmentation utility).

  7. If still no go, try to run the defragmenter in Mode without failure. If she runs, something interferes with it in standard mode and stalking the interference may not be easy. Note: Some versions of Windows 7 disables the ability to run the Defragmenter built-in in safe mode. If disabled, it will say when you try to start it in safe mode.

  8. Disk Defragmenter may no longer be on the system or is damaged while it needs a re - install. Solution: Reinstall the built-in function.

  There are several ways to re - install the built-in Defragmenter:

  A:
  a. open the menu 'start '.
  b. type '% Windir%\Inf' in the 'Search' box and press 'Enter '.
  c. in the window that opens, find the file named "dfrg.inf.
  d. right-click on "dfrg.inf" and "install".

  B:
  a. go into "start > run" on your computer.
  b. Type "rundll32.exe setupapi, InstallHinfSection DefaultInstall 132% windir%\inf\dfrg.inf" and press "Enter."
  3. click 'OK' to make the program automatically reinstall itself.

  C:
  a. go to start > all programs > Accessories > right click on command prompt > select 'run as administrator '.
  b. at the command prompt, type "regsvr32 dfrgsnap.dll" and press "enter."
  c. type 'regsvr32 dfrgui.dll' and press 'Enter '. This will reinstall the missing Defragmenter files.

  Most of the problems will be resolved in #6 above, but if not and if your windows installation is otherwise works well, consider downloading a free trial of a commercial defragmentation tool rather than the drastic measures to restore the frame-s functionality.

  Third-party programs are more robust and many work in the background, so you can use your PC during defragmentation.
  Most third party programs offer a free, fully functional trial (better ones are for 30 days). Install one of them allows you to disable built-in and if you decide to uninstall, removal will replace the built-in function, repaired several times in the process: it's worth a try...

  9 here is a recent Top 10 comments side-by-side comparison of the best available defragmentation programs:

  http://Disk-Defragmenter-software-review.TopTenReviews.com/

  a. Select a program and install it. The best defrag programs are automatic and the top placers in the foregoing analysis can defragment everything using the PC. Place it at the top of the page was the only defragmentation program preventing fragmentation (see comment).
  b, readers to defragment your drive.

  The PC should improve speed, as the above steps are performed. Here are additional steps to optimize PC for speed:

  10. make sure that your PC has as much memory (RAM) as possible.
  Solution - Know how much RAM your PC:
  a. go to start > right click on 'Computer' > properties
  b. this list the type of processor and speed and how much RAM is installed, and what version of windows is running and the Service Pack. Sign it, because it may be necessary later.
  c. search your PC name and model # followed by 'memory' and see what is listed. This tells you what type of memory you need and how many "Sticks" your PC will accept.
  d. get the maximum amount of memory your computer can contain and install it. Search for "how to install memory on one (your model name and #)" to find videos on how to do this if necessary.

  11. make sure that the registry is clean.
  Solution: Get and run a good registry cleaner.
  a. check to see if there is a registry cleaner already in the system;
  b. otherwise, download CCleaner here: http://download.cnet.com/ccleaner/
  c. run the registry cleaner until he finds and corrects any errors.

  Note: Be careful with registry cleaners as there are many autour with new ones coming all the time with some would have been causing more damage than they help. Use a proven reliability.

  CCleaner is one of the originals and very safe.

  Once all this is done, your PC will be in the best possible shape.

  Good luck and let us know if you have any questions (ask your questions and I will then answer best I can).

  Bill R TechSpec

  PS: If after all that, the PC is still not doing well, repair may involve repairing the windows installation and possibly re - install windows itself. These aren't simple solutions. If so, indicate if and guidelines can be provided.
  ..

• Creating .exe cloud does not open when you download.

  As the title says, I can download the file but it does not open. In addition, when you attempt to open in Internet Explorer, it says that the file is not found or it can be moved.

  Any help?

  Andrew

  We can call you and help you resolve it.

  Otherwise, you can create a new user account and verify that.

  Create a user account - Windows help

  Thank you

  Varun

• When I right-click on an image in LR and select Edit in PS, PS opens but the image does not open in PS.  CC (2014)

  Everything seems to work as it should, but the picture just does not open in PS CC (2014).  I am very new to PS everything subscriber to CC for photographers a month ago.  I have the last PS and LR (5.5).  Photoshop just open and that's all!  I know the image I selected in LR to open in LR.  I selected edit copy with changes in LR.  When I do the same edit with the same picture and ask for one of the perfect Photo Suite 8.5, the images opens as expected.  I don't know that I have a preference thing incorrectly.

  Al Guden

  Yet once, thanks for the quick reply, but in searching the web I found someone responds that it looked like something that would go far with an uninstall and reinstallation of PS CC 2014.  I have done that and restarted my PC and back and forth works now.  I guess that the problem was caused when the new version has been added without the 2 previous versions being deleted.  When I have remeoved the 2 old versions, I hope that the link had a falling out.  Now everything is ok.

• Disk drive does not open. What is a girl to do?

  I've been ripping CDs to music on computer, and now my drive doesn't open. Can you help me solve this problem?

  Hello

  If they don't help then check with the manufacturer of the system or in support of the Drive manufacturer,
  their documentation online and drivers and ask in their forums (if any) on the known issues.

  The drive is just stuck?

  For the readers of the status bar:

  Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
  a paper clip that will release him and the reader to open.

  Create a trombone in car Opener
  http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

  Open a CD/DVD player with a paper clip.
  http://www.josepino.com/?open_cd-dvd_paperclip

  =================================

  For the readers of the slot:

  Check with the manufacturer of system on how do to eject the disc.

  Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
  http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

  Be careful as you may damage the player using the method below:
  
  You may need to get the driver to work 1 However, this could still work.
  http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

  The method used on the Mac could work
  http://www.YouTube.com/watch?v=wpWieIoBBrk

  How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
  http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

  Also have heard double tape on a credit card or play can work.

  ===========================================================

  If necessary:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot uninstall Adobe Air - tried everything - Pandora does not.

  I can't update AdobeAir and now pandora will not work. I tried to update for the month.

  There is an error unspecified everytime I try.

  So now, I try to uninstall AIR, so I can try to reinstall.  I get the same error when I try to uninstall it.

  I am the administrator on my machine - and I tried to uninstall as an administrator. No difference.

  I tried to uninstall to the CMD line - no difference.

  I'm on my work maching - Windows XP Professional Version 2002 - SP3

  The AIR is version 1.5.3.9130

  Help, please!

  Hi guys,.

  Could you try uninstalling AIR using the Windows Installer Cleanup utility?  Details on this app on this post.  If this does not resolve the problem, the next step would be to review your logs to install AIR.  Here are the details of this procedure:

  1. ensure that the display of hidden files is enabled.  You can find instructions on the Microsoft site:

  Windows 7, Vista, XP

  2. navigate to the following folder (replace username with your username):

  Windows 7: C:\Users\username\AppData\Local\Adobe\AIR\logs

  Vista: C:\Users\ username\AppData\Local\Adobe\AIR\logs

  XP: C:\Documents and Settings\user_name\Local Settings\Application Data\Adobe\AIR\logs

  3 attach the install.log to your post on the forum or open the log file with Notepad or your favorite text editor and select all and copy/paste.

  4. in some situations, the AIR installer will fail during the installation MSI.  You can determine if this has happened by searching the text to Install.log "an error has occurred during installation msi operation".  If the text is found, please enable and locate the MSI log using this Microsoft document and include it, as well as the Install.log AIR when it referred to the issue of installation.

  How to enable Windows Installer logging

  Once the MSI logging is enabled, rerun Setup from the AIR to generate the MSI log.

  Thank you

  Chris

• Disk Defragmenter does not open

  Hello, I have an inspiron 530 with Vista and I wanted to clean up some files that I don't have anymore, I did but now Defragmenter will not open. Can someone point me in the right direction, thank you.

  See if there is a solution here.

• Purchase image does not open.

  It is being downloaded as an AI / EPS file. Other images I have purchased are download in jpeg format. Why is it one different image from the other?

  It says Adobe Reader cannot open "AdobeStock_28589586 - 4.ai' because it is not a supported file type or because the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded)." I don't have illustrator from adobe installed on my computer (Mac - pro 2014), but want this file in jpeg or pdf format.

  Thank you

  David

  .AI is an Illustrator file or a vector. You don't need illustrator, but you will need program that can open them. Adobe Fireworks is another which should open the file. To read in PDF format, you will need to create a new PDF and import the image in it.

• png image does not open in Firefox (wants to download)

  This is one of those little annoying things. I enjoy working the Samarai. available from djape Sudoku puzzles. Solutions for all the different puzzles are available on a single page: http://www.djape.net/sudoku/wp/index.php/solutions/

  For puzzles, I can right-click on the image of the puzzle, open in a new tab, and print it from there. But the solutions are different - they are png graphics that are a link to the solutions page. I can not just with the right button, because the image is a graph generic blank puzzle. The link takes me to a .png file, but I can choose only to open the chart with preview or save the file. I prefer to open in a new tab and print it to in Firefox, because the title of the page (and therefore the date of the puzzle) may appear on the printed copy and I know what goes with what puzzle!

  I searched Add-ons that could allow me to don't solve this problem - no luck. Firefox preferences only let me not choose between 7.6 QuickTime plugin or a snippet, and they both just open in the preview.

  Whenever a web page has just a png image as part of its page, which loads well (including the graphics on the Mozilla support site). Why does a different problem just because it is accessible by a link?

  Any help you can offer would be greatly appreciated. Thank you!

  -Sarah

  Look to open them in the browser: https://addons.mozilla.org/firefox/addon/8207

• DNG images does not open in 16 bits in ACR 6.7

  Hi all

  Never seen this problem before and it seems to be no answer in the forum:

  DNG images will open at 8-bit in PS CS5 and 6.7 of the cab on our old iMac OS 10.10 on our even more recent than the one they open in 16 bits as they always have and should...

  I tried opening CS5 in 32-bit mode, stopping and restarting in 64-bit... without any result. Since there was a problem of disk a few months ago which has been fixed, I think that maybe I need to reload CS5 from the CD, I have...?

  I checked all preferences: CS5, bridge, ACR 6.7 and there is nothing that allows to select 8 or 16-bit except the usual method via the "Workflow Options" box when you click on the info of the image - in blue - at the bottom of the window of the cab or CS5 > Image > Mode > 8 or 16-bit... Of course I could do anyway, but there's a glitch here which is annoying when you don't know where to go next because it must be done for every image you open... !

  Could be, of course, such a simple solution, as usual...!

  Thank you all for any possible answer!

  See if remove Camera raw preferences solves it.

  Reach

  ~/Library/preferences and remove the Adobe Camera Raw 6.0 Pref.

  What ' s your user library that is normally hidden on the new os x versions and can easily be accessed by clicking on '.

  on your desktop, press Option while clicking on Go menu , click library.

  Then click the workflow options in the acr dialog box and set it to 16-bit/channel and see if the parameter sticks when you open another dng.

• Disk defragmentation does not open. Command prompt opens and closes in a fraction of a second

  I've upgraded to windows 7 ultimate x 86 a few months on my Toshiba. Form below-

  
  I ran Disk Defrag when it was Vista Home Basic before the upgrade. 2 days, I just cleaned my hard disk of 8 GB of free space to the 37 GB is now. I wanted to revive Disk Defrag. Don't ask why or say that I owe.
  The point is, I can't even open the program. Is nothing in Task Scheduler. I had a 30 day trial Norton after my update for win 7. I noticed a lot of people blame anti virus for a reason, so I thought it should be mentioned.
  This is what happens when I run Defrag.exe from the C:\Windows\System32 folder. (Note: the screen command prompt runs command sfc/scannow & found and given nothing wrong)
  
  The prompt on the left window disappears quickly able to capture, and it seems important to my problem, I guess.
  Why in the world can't run the Defrag.exe at all? Any help? I'm positive I want to install a third-party Defrag.
  I hope that I asked the right way.
  Thank you
  Mickey

  Well, that's the question. I can't access the UI anyway what so ever.

  I decided to do a complete reset of the system and re - install Windows 7 Ultimate on my computer. The user interface of defragmentation works perfectly fine now. I guess I'll never know the problem I had, but at least it is fixed :)
  Rajesh, thank you very much and thank you for your quick responses!
  Mickey

• My Photos stored on hard disk separate does not open

  my system:

  I saved all my photos on another more difficult due to the large number of it to avoid slowing down my computer.

  I've been to been able to open on and off my Photos, but since yesterday when I try to open it is extremely slow and stay stock to 18%, I'm not on gif because th various apple software update? can anyone help or point me?

  Thank you

  François

  What is the format of the external hard drive (in the finder, click right on the drive and get info to see the format)-there must be as Mac OS extended (journaled)

  What else can you tell us about what's going on?

  LN