Adobe captivate 8 windows don't respondents not 8.1
Hello.
Well, my problem is that the program stops working at startup and I try several solutions:
(1) turn off the firewall
(2) reinstall adobe captivate
3) run as administrator
(4) compatibility mode
(5) disconnect internet
If anyone has a solution, please help, thanks and greetings
processor works, but the program does not
Hello
It could be a problem due to some corrupt or foreign fonts in your system:
You can try the following steps to make sure if it is the case on your side as well?
(1) close to Captivate and all other running applications.
(2) go to C\Windows\Fonts - copy the "Fonts" folder and paste it on your desktop (to have a return to the top).
(3) now remove all the fonts in the directory "C\Windows\Fonts", it would eliminate all the fonts installed on your computer, it could ask that some policies are necessary, because applications are dependent on them, therefore, ignore these fonts.
You would be left with a bunch of fonts needed after this operation., now try to launch Captivate again.
Note: Please be sure to keep a backup for all the fonts on your desktop.
Kind regards
MILIN
Tags: Adobe Captivate
Similar Questions
-
First Pro Cs5 windows don't respondents not 10
Hello
After the upgrade to Windows 10, I noticed that first CS5 will not respond for 10 to 30 seconds each time I get out of the program to check e-mail, internet, and then go back to change.
My specs:
OS - Windows 10 pro set for priority of performance
CPU - Intel I - 7 3960 x 3.30 GHz
Hand drive - Seagate 750 G Momentus XT (472g free)
Storage - Seagate 2 t in Raid 0 (234g free)
Video card - Asus GTX 570 1280 MB 320 - Bit GDDR5
RAM - 16g
Any help would be appreciated.
Hi IOU.
OS - Windows 10 pro set for priority of performance
Sorry, you have problems with this. The problem is that you are running an operating system not supported according to requirements for CS5. Windows 10 is simply not supported, we cannot give you advice other than the installation of a Windows 7 boot disk in your computer and first Pro CS5 install it. Start this drive when you work with first Pro CS5.
If you use this software with Windows 10, unexpected behavior will continue to arise. If all goes well, another user will be upward to help you with these errors if you insist on running the outdated software with a modern operating system.
Thanks and good luck,
Kevin
-
Windows don't mail not send and receive some
Windows don't mail not borrowed with att.yahoo port, Server error message: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] wrong username or password.', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92
Hi Thomas,
Thanks for posting the question in the Microsoft Community!
I suggest you to refer to the article and see if it helps:
Solve problems with Windows Mail
If the problem is not resolved, please respond with more details and we will be happy to help you.
Thank you.
-
OK, I changed my hard reversing in car and the windows don't will not activate because of it, how or who should I call to fix this *... once again!
Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us
---------------------- -
CDRom does not work and the DVD player does not work. Have you checked the two drivers are up-to-date.
Hello
For the 6to4 card number, which is separate from the issue of the CD/DVD.
Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT
Nothing else to do, Windows will do the rest. And you can ignore errors if you wish and on some
computers, it will always be there but no problem to be expected.On a Windows Vista-based computer or on a computer, Windows Server 2008, the card Microsoft ISATAP
appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
http://support.Microsoft.com/kb/932520==============================================
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
solves the problem.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
If necessary:
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
that the troubleshooter does not, and those who "could" be the cause.Check with your system manufacturer Maker and device for possible firmware updates and the good
Your player registry entries.Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
a person with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob - bicycle - Mark Twain said it is good. -
CC Adobe works on windows 10, nothing will not install correctly
OK NONE of the applications will install properly on my windows computer 10 BRAND new. Support told me that I had to wait until Monday, so that someone who could help then disconnected from the chat session while I was responding. Is compatible with windows 10 CC of Adobe and should even bother trying to reach customers on Monday. Everything seemed to install, and then says that he has not completely installed. When I reboot it looks like everything installed but when I try to open a first file that was created on another computer on my 2 month account, the system says that it cannot open the file because it was created with a NEWER version of first. It is not yet possible
Run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)
-
Adobe Creative Cloud window empty and does not ask for connection?
I currently have three computers. A 2010 iMac, a Macbook Pro 2012 and a new Macbook pro 2014. I disconnected and uninstalled creative cloud of the iMac. After buying the new MacBook Pro (2014), I used the mobile 2012 to copy my user profile on the laptop latest (including Adobe applications and cloud creative). However, when I try to open a project from the external hard drive, that I worked out, I get this message:
Adobe Application Manager is needed to solve this problem. However, it is missing or damaged. Please download and install a new copy of the Application Manager 'http://www.adobe.com/go/applicationmanager'.
When I go to this link, I get a prompt to download creative cloud (No Manager applications). Of course, I redownload creative cloud and gives me the steps to install but once the creative cloud installation progress bar ends and CC open, the window is empty and I wonder not identify or anything. I can't access all projects or connect to my computer CC on this new account be.
I deleted the file opm.db in the folder "OOBE" and I restarted the application. I uninstalled and reinstalled. I restarted my computer. I have tried everything for the last hours and made absolutely no progress.
I'm pretty stressed about it than the projects I work on are time sensitive. Any help would be greatly appreciated as chat customer support just left me on hold for almost an hour and I have not found a solution in the forums.
Thanks in advance.
Mac migration (or Time Machine) does not always work with cloud programs
Uninstall... to run vacuuming... Restart your computer... Reinstall
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-using the vacuuming after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-
L Ctrl Alt Del and Windows don't DO NOT WORK ON WINDOWS 7 PC
Hello
I tried netplwiz and requires users to press Ctrl alt delete is checked.
I looked on many sites and I'm stumped
I don't know what to do
Help, please
It can help to compare the Winlogon key in the registry with another computer to see if there is something missing.
Select Start, run, type regedit and press the ENTER key. Locate HKEY_LOCAL_MACHINE and the arrow to the left of HKEY_LOCAL_MACHINE to expand the folder. Repeat the process with the SOFTWARE and so on until you get to Winlogon.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WinlogonRight-click on Winlogon , and then select export from the menu drop down. Enter a file name (no matter what) and change the record as the type of textfiles. Please download a pf copies the file to your OneDrive as a shared file and post a link here.
For assistance OneDrive see paragraph 9.3:
http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm -
Adobe Captivate 5.5 aggregator project does not move forward... Help
Hello
I have an aggregator project with two included Captivate SWF projects. For some reason, when Captain project finishes, the aggregator project stops, does not open the second SWF file. I have the last slide in the first project "on exit" "go to the next slide" value (I tried also to leave 'no action' in the form). It worked last week, and I can't understand what changed, or what I'm doing wrong this week. If someone else has encountered the question and can offer an idea?
Thank you
Tim
Well, the question seems to be if the aggregator published title is identical (in my case) the master SWF file. I just added a ' at the end of the title published aggregator and it works as it should now.
-
It is said that this is a prob with Windows.net framework or microsoft office 2003 thre are updated 3 (kb2533523) (kb2468871) and (kb2539636)
See Ted_W; s solution
09:20:02 UTC 08/17/11
-
Windows don't email not able to click on a link successfully?
I use Windows live mail for ages OK all of a sudden when I get an email with a link (URL) to a website I get a box indicating
""This file has no program associated with it for performing this action. " Please install a program, or if it is already installed, create an association in the default programs control panel. » »
So I downloaded Windows Essentials, which I think is out of date, but I still get the same message (above) when I click on a web address that comes in an email?
Any body can help?
Reaffirm Internet Explorer as default browser:
- Close all running programs.
- The default type in the start search box, and select default programs results.
- Click set your default programs select Internet Explorer in the left pane, and then click set this program as default.
- Back to default programs, click on set access and computer program defaults.
- Expand the custom section and select Internet Explorer under choose a default browser.
- OK on all open windows control panel.
Now try to open a link in an e-mail.
-
Adobe Photoshop CS5 crash/don't will not start on my XP computer.
Hello
I installed Photoshop CS5 on a coupel of comupters (XP) and I am getting following error when I start it. The user use compulsory porfiles NTUSER. THE MAN.
AppName:photoshop.exe AppVer: 12.0.1.0 ModName:scriptingsupport.8li
ModVer:10.0.0.0 Offset: 000d183a
Larbi
Some security stuff blocking the socket required for scripts... connection turn off / configure it accordingly.
Mylenium
-
SWF in IE a project created by Adobe Captivate 7
When someone tries to read a swf in Internet Explore a small box appears with "project created by Adobe Captivate 7" and the video will not play
Anyone know why this might happen?
I think it's because the PC trying to play it using IE with the flash 9 version...
-
Adobe captivate 5 help pdf file
Under the Help menu, the help of Adobe Captivate (F1), the help file does not open, and there is no error message. Does anyone know of another way to access the help file?
Hello
Welcome to the Adobe Forums.
You can download the PDF (Captivate 5 help) from here: http://help.adobe.com/en_US/captivate/cp/using/captivate_5_help.pdf
It could be useful!
Thank you
Vikram
-
I hope you can help me. I bought adobe captivate 8 online and when I click the e-mail link for download, it comes up with 7 programs, some are 64-bit and some are not, my computer is 32-bit. I don't know which of these 7 to download? All or just the 4 non 64-bit?
I tracked down the problem with the download and installation, my windows 7 was missing a file and everything worked after reinstalling windows. The first 32-bit program in their list was used. I hope this can help others.
Maybe you are looking for
-
I tried to install MS Office 2007, but failed due to the Error 1314, who was looking for '% APPDATA%\MS\INTERN\QUICKL\ '. Now, I could not even run Outlook 2003. The same problem occurred when I tried to install iTunes 10.2. I couldn't use ipad shuff
-
I recently download adobe reader, and for some reason any he does all my files when opened must be opened with adobe reader, evern my internet explore trying to open with it and fails. How to fix it.
-
Unable to connect to the Internet with Magic Jack
Original title: network programs network networking Internet Web site Site Web Web Site URL I recently bought a magicjack, it keeps telling me to connect to the internet, which I am connected. What I need to know is how to run on windows 7
-
Is it necessary to have one user other than administrator if I'm the only one using the computer?
-
I'm unable to use windows applications in my college. Is it because of the proxy connection? Each app says I'm not connected to a network. Please let me know how to encounter this problem.