Adobe Premiere Elements 11 - Timestretch creates a choppy video playback

Similar Questions

• Makes me nuts. Adobe Premiere Pro CC - Mp4 fine but Choppy in playback and export.

  It's driving me crazy. I can't find anything about my situation.

  I transfer all my VHS tapes & tapes Hi8 using Blackmagic Media Express. They fired to the mp4 format, but the sound was a little out of sync so I went to fix this in Adobe Premiere Pro CC because I'm adding titles in any case. The original mp4 file works perfectly. But when I import it into Adobe CC he plays rough AND when I export, the new ground thus plays file. I tried using a converter that makes the works, but the video does not look more good. This is my first post so I apologize if I lack info.

  I have a...

  Mac Pro (end 2013)

  Processor 3.5 GHz 6-Core Intel Xeon E5

  32 GB 1866 MHz DDR3 ECC memory

  Start drive Macintosh HD

  Graphics AMD over-pants D700 6144 MB

  Any help at all will be greatly appreciated. Thank you!

  The problem is obvious, as the sequence frame rate and the output is 14.985 when be 29.97

  I wonder if the mp4 clips captured with the good rate, but first he misinterpreted?

  MediaInfo is a free downloadable software that shows all the technical features of the file source video. First, right-click on a clip in the tray, and then select Properties - what does say for pace?

  Try this - open a new project, import your mp4 clips captured. Right-click and select change > interpret footage and if the pace is not 29.97, change it to 29.97

  Now click with right button and select new sequence of the Clip. Add the clip to the timeline and play, how is it? Check sequence > sequence settings and make sure it is 29.97, and the output should be as well.

  If you have already done a lot of editing and of course don't want to start over, try this. Make a copy of your project. Create a new sequence DV NTSC. Do the thing of frame rate change on source clips in bin. I think that you may be able to select multiple and modify several at a time. Go to the original sequence with published clips and do CTRL + A to select all, then CTRL-C to copy, then go to the sequence of NTSC DV you did and paste with Ctrl + V.

  If all goes well, he takes the work you have already done and make a beautiful sequence of 29.97, you can then export to 29.97 and everything is fine!

  Thank you

  Jeff Pulera

  Safe Harbor computers

• Why Adobe Premiere elements 11 not load not my video?

  First, the system I'm working on a 10 and set windows to update some time ago. I have not had any problems until today 27/12/15.

  So basically, the problem is the following

  1. open the first elements 11

  2. Select new project

  3 Add media items

  4. click on video avi [note recorded with fraps, which I've never had problems with before]

  5. video appears in the files

  6. the little blue bar at the bottom left of the screen is not displayed with the percentage of loading it

  7. drag the video to the editing area

  8. go to save [tried several ways to save]

  9 is it trying to save it without time til done appear or anything like that.

  Usually, and I mean from last Sunday. He would charge the media, a little blue bar would leap upward, at the bottom left of the screen and it would be to load the file. I would then remove the video stream to the economy option and click Save medium-quality mp3 and then it would take up to 3 minutes to save a file of 30 minutes. I did exactly the same thing for 2 years now and it worked til last Sunday which was the 20/12/15. I tried to run with the settings recommended, tried as admin, tried to restart the computer, try recording on computer, have still attempt to reinstall but I refuse to do so until I know for one did that 10 windows do not update some messed up updated and caused my computer to have problems.

  So if you have an idea please let me know

  FRAPS is certainly the issue here. It uses a codec that Premiere Elements is not able to read on your computer.

• A video created with Adobe Premiere elements 13 can be converted to run on Adobe Premiere elements 11?

  A video created with Adobe Premiere elements 13 can be converted to work (and edited, etc.) on Adobe Premiere elements 11?

  I invested in a video creation I made with 13 items first, but now 13 refuses to work properly for several hours (space bar and game button won't do not time line indicator).  I hope that I will get the problem solved, but in the meantime I must get this complete project and don't have the time to do it again.  So, I need to convert the work so that it can be completed with 11 first which seems to work fine.

  Thanks, Dave

  A standard THAT VIDEO should work on both versions... a PROJECT file is generally not backward compatible

• Adobe Premiere elements 13 crashes at startup.

  At the start, "Adobe Premiere Elements 13 has stopped working" error, and clicking on debug does nothing. I run Windows 10, but this is the first problem I've had since the first purchase. I created this new thread because I can't find an effective solution in any thread. Any help, or a link to a thread that I neglected, would be greatly appreciated.

  Edit: I don't know if that helps, but the specific program, it stops on the start is ImporterQuickTime.prm

  Thanks for your comments. The key to mine is shift + f10, but I did see an option to restore the default value, and I can only assume that's been there forever. I also tried to reinstall the first, but it only starts for a second before crashing with the same error.

  Update: after 4 hours of watching Adobe supports tinker with my files, they concluded it was my Nvidia GTX 765 M graphics card causing in problems with Adobe Premiere. After a little handy, I found that if I go to the Nvidia control panel-> manage 3D-> global settings settings-> and put "Graphic processor preferred" for automatic selection, the issue is fixed.

• Adobe Premiere Elements: Film lasst sich nicht speichern

  Hallo,

  I have Adobe Premiere Elements ganz neu, kenne mich noch nicht gut damit aus especially dementsprechend. Jetzt habe ich einen ca 5-minütigen Film standing und diesen nun speichern möchte. Habe're jetzt schon mit den single tried Optionen der Film lasst sich einfach nicht speichern, kommt immer dieselbe Fehlermeldung: "Fehler beim create movies. Unbekannter Fehler. ».

  Film der ist ein Geschenk und ich IHN unbedingt bis Sonntag (9.08.15) thankyou!

  ICH möchte like IHN so, dass man also auf dem speichern oder zur computer not auf dem iPad Mini playing kann. ICH ware thankful so, wenn mir helfen konnte, dieses problem zu losen lastige someone. ICH kenne mich mit computers nicht sehr gut aus, deswegen ware eine möglichst verstandliche explanation gut . Schön evil vielen Dank im Voraus!

  Daten zu meinem Notebook:

  Windows 7

  4 GB Arbeitsspeicher (3 davon vertretbar)

  32 bit-system

  LG, Alisha

  Alisha

  Thank you for the responses with a lot of important information about your problem. It's OK to write in German. I don't speak or write German, but I can use the translate in the response or use Google Translate or Bing Translate. We will find a way to communicate.

  Top of the list to check

  1. the latest version of QuickTime installed on your computer

  Please open QuickTime player on your computer and navigate to its information Menu/About Quick Time Player. Is the version number here indicated as 7.7.7?

  If this is not the case then please download and install the latest version of QuickTime on your computer with Premiere Elements.

  Apple - QuickTime - Download

  2. run the program to a user account with administrator privileges and apply run as administrator.

  a. right click on the desktop for first 13 items icon and select apply Run As Administrator.

  b. navigate to the account user/screen control and determine if the label for your user account includes the word administrator.

  Next on the list

  1. in the open project (Expert workspace), expand the Timeline with the - + cursor above the timeline and look for gaps in the chronology of content as well as for any irregularity in lots of text tiles and placement of any transition.

  2. There is the issue of computer-related resources elements first 13/13.1 on Windows 7 32-bit as a 32-bit application, 3 GB of RAM or less, your space probably about 200 GB of free hard disk or less.

  a. what type of a project of your I - standard definition 720 x 576 or high definition 1920 x 1080? You can check that by accessing the Menu/project to change settings/general and see what is there for the size of the image.

  b. what type of video files you make to the project - with compression DV as DV AVI or AVCHD compression or other?

  Lots of text on the video could contribute to the project. But you see prior to export, or only by the continuation of the problems when you try to export?

  What are the dimensions in pixels of the pictures? Photos oversized for project settings can be another factor contributing to project failures. Then he takes the photos resized before use.

  Since your message is "failure to create a framework", my first choice of solving problems of management would be chronology contained irregularities and issues of secondary computer resources.

  Please read the above. Explore the effect of the deletion or reorganization of some of the components of the timeline and then let us know of your progress.

  We can then decide what then.

  Best wishes

  RTA

• Having several problems with Adobe Premiere elements 13.  Now my worst is that when I add text to a clip, it comes out "Auto color" so that the text is in place.  Help?

  I'm having some trouble with 13 elements.  One is that, in mode 'play', the sound stops just happening.  I have to click 'pause' and then 'go' again and the sound returns.  It stops also play on its own, I have to hit 'play' on several occasions.  Just got the software, used intensively for a week or two and it just started happening.dor

  Today, when I add text to a clip, it deletes now on "Auto color" so that the text is visible in the clip, then automatic color when the text is missing.  Any suggestiosn?

  nikovichb

  If we look at the same thing, you called the attention a strange first elements 13 titration AutoColor/module interaction. This can be reproduced to the Expert or

  fast working space. I will be this demo within work fast since it's where you worked.

  1. import a still in fast work/film space.

  2. with the still selected, go in Panel of Palette/Color tab/settings setting expanded and just click the close the route of the tab Auto color tab adjust.

  3. go into Menu/New text/default text to open the module of titration of the project. When you do this, you see the following and not the still on which the text title must go.

  

  And when you close the titration module, you will see the title of text "Add text" in nature.

  

  The only solution I can think of right now is to create the title of text and then apply the Auto color to the still.

  It is interesting that this happens only with the color of the car in the color Panel. If you do not click

  Color Panel and to use more options for color adjustments, this behavior does not occur.

  Deleting the Adobe Premiere elements Prefs file does not correct this situation.

  Regarding

  I'm having some trouble with 13 elements.  One is that, in mode 'play', the sound stops just happening.  I have to click 'pause' and then 'go' again and the sound returns.  It stops also play on its own, I have to hit 'play' on several occasions.  Just got the software, used intensively for a week or two and it just started happening.dor

  I think that here we have to explore the parameters of the project (presets), rendered the source and chronology of media properties and non-rendusent contained prior to export.

  Please read the foregoing

  a. check if the Auto title text color glitch I've seen what you describe in your situation

  b. give the details of your project so that we can explore cause and effect for irregularities in reading content of chronology, as seen in the edit box monitor.

  Thank you.

  RTA

• Application of subtitles in Adobe Premiere elements 3

  Hi all.

  I am very new to Adobe Premiere elements 3 I was necessary to the understanding of the aspects of it for my new job. One of the aspects that I want to look at is the ability to add in subtitles. So, for example, I have some excerpts from DVD that was cut with no current subtitles (in about 2-3 minutes each) and was hoping to add captions to accompany the narration for those who have hearing difficulties. Is it possible through first elements 3? If so someone might be good enough to let me know how?

  Thank you very much and I look forward to hearing back soon.

  Kind regards

  Harj

  Harj,

  If you have installed additional content (separate downloadable file separately or DVD), you should have a lot (not sure the casual count) titles of lower third. Also, you can create according to your needs. Usually with subtitles, the design is very clean and simple, so there is not much "design work" required. However, you might want to do something simple, such as adding a form to give good contrast for text and also to keep the details of the underlying video it clutter.

  A tip, I like to keep any title text on the screen about 1.5 x as long as it takes to read it.

  With real subtitles (as created from SCC files in yet), I find that too, too fast to really allow the Viewer to read. I hate when that happens.

  Good luck

  Hunt

• Adobe Premiere Elements Collage Question

  If this isn't the right place for this type of question please let me know.

  My ultimate goal is to use Adobe Premiere Elements 8 (or 9) to create a collage of images that appear on the screen.

  What I want to do is have an image on the screen for a second, then turn and reduce the size in the background, to have another image displayed on the screen and repeat the process until you have a pile of images scattered on the bottom.

  The method that I came with several background images, the first with one image, the other with two photos, etc. with the changing as each image turns up.  The problem I encountered is that I can't seem to control the spin, or make the images become smaller as they do not rotate.

  Someone has an idea how to get this effect?

  You can certainly do this by keyframing effects of movement. Do you understand how to use keyframing?

  It will become quite complicated, however. Each of your clips will have to be on a separate video track so, depending on how many images you want to display at this time, you could use a dozen or two video tracks!

  But it is certainly possible - as long as you keep made your time line that you work and you have enough computing power to have so many images on the screen at once. (This sort of thing is much more easy in After Effects - but this program costs hundreds of dollars more).

  So 8 or 12 images on the screen at the same time is certainly feasible. There is a lot of work, but doable. But create a major photomontage of 30 or 40 images in Premiere Elements is likely to drive you crazy!

• Adobe Premiere Elements 8 - cannot start a project

  Hello

  I'm new here, I just bought first 8 to change and creat videos at home, but when I opened the first and select new project, I can't get as much as my file naming. After that, I get a blank gray screen with the menu bar. Unable to add my files or change at all. any help would be appreciated. Oh and I am running windows 7 Home Edition

  Thank you

  ulua76

  Hello Ulua76,

  Recently, I read about Anti Virus 'on access Scan"have to interfere with Adobe Premiere Elements.
  Did you by chance 'on access Scan"feature enabled in your Antivirus software? If you do not have this option, could you try disabling it and verify that your problem is resolved.

  EM

• Sony HDR-SR12 Windows 8.1-compatible 64-bit and Adobe Premiere elements 11?

  Hi can someone advise if the Sony HDR-SR12 camcorder is compatible with 64 bit Windows 8.1? The site compatibility 8.1 win was not clear.

  Can anyone adivse whether AVCHD files can be imported from the drive hard Sony HDR-SR12 or appropriate in Adobe Premiere elements 11 memory cards? I could not find the camera listed as supported, but may not have looked in the right place.

  Can anyone confirm if the AVCHD files can be imported from the HDR-SR12 in Corel VideoStudio Pro X 7? It seems to me that they can.

  Hoping someone can enlighten before that I spend over $ 500 on a second hand unit that I'm very interested.

  Regards, Phil

  Thank you Paul. I'll buy the camera. I discovered that the first items 11 supports the HDR-SR12E as well. Appreciate your reply and you will indicate the problem as solved. -Sincerely, Phil

• Adobe Premiere elements 14 accidents

  Hi adobe forum.

  I recently bought Adobe Photoshop elements 14 and Adobe Premiere elements 14.

  While I can start Photoshop, I can't do it with first. Whenever it crashes, and the ugly windows error message appears as shown in the png file attached.

  While waiting, and not by clicking on "Abbrechen" (which is identical to cancel), I offer myself to debug this problem, but even when I choose to do, nothing happens.

  My system is as follows:

  10 Pro 64-bit Windows

  I7

  8 GB RAM

  207 GB left on my HD

  I have installed Visual Studio 2015 and several other development tools. More details if necessary.

  I really want to use this program, otherwise I have to give back the license and get my money back.

  Any help appreciated,

  Torben

  EventLog SAIS as follows (in German, unfortunately):

  Fehler beim as "C:\Program Files\Adobe\Adobe first Elements 14\MPEGHDVExport.exe" Aktivierungskontextes Generieren. Die HPLC Assemblierung "Plug-ins and #x5c; Common & #x5c; TSStrider, type = "win32", version = "1.0.0.0" ' konnte nicht found werden. Use Sie eine Haltung as diagnose das Programm 'sxstrace.exe.

  My translation:

  Generation failed for "C:\Program Files\Adobe\Adobe Premiere Elements 14\MPEGHDVExport.exe" activation context Assembly dependend "Plug-ins and #x5c; Common & #x5c; TSStrider, type = "win32", version = "1.0.0.0" "is not found. For information, use the program 'sxstrace.exe.

  So basically, an assembly is missing on my system. What is TSStrider?

  [Left first Pro for first items - MOD]

  You must contact Adobe customer via chat service.

  https://helpx.Adobe.com/sea/contact.html?step=PRE_adobe-ID-signing-in_stillNeedHelp

• Download Adobe Premiere elements Fail test! --[- Cannot install on Vista]

  Hello!

  I want to download the Trial Version of Adobe Premiere Elements, but it won't let me.

  You see the screenshot in the link below:

  

  You see the screenshot, the so-called "sorry, this Page is not available.

  Could someone solve the problem of the Web page, one of the Webdeveloper?

  By the way:

  I took this for Windows Vista Home Premium SP2 32-bit.

  Hopefully, this could be resolved as soon as possible!

  Thank you!

  Best regards, MP.

  Hi, John Waller!

  Thank you!

  Okay, I found the old Version BEFORE here:

  First elements download | 10, 12, 14, 11, 13

  Best regards, MP.

• ADOBE Premiere Elements 12

  Hi all

  For some days, the first items 12 adobe editing software refuse to acquire my images when I connect my camera sony HDR - FX7 (HDV format) via the firewire cable. I note that all of the camera - editing adobe ss12 program settings are correct. Besides I am no newbie in editing video on the PC because I have already used adobe first elements 4 for 6 years and now version 12 for almost 2 years with no problems. When I run the capture images, or although I pilot the camera via ss12 (forward, stop...) you will see a screen:

  "Adobe premiere elements 12 has stopped working. A problem is that the program has stopped working properly.

  Windows program will close it and you specify if a solution is available.

  Of course I got no response from windows.

  Why nothing change in the pc, from one day to the next, adobe ss12 refuse to purchase t - it to rush on my K7 HDV?

  As I have not found solutions on different forums, I am addressing you.

  Thank you pour your answers.

  JPE

  your camcorder is connected to your computer with a FireWire/IEEE-1394 cable?

  Are you able to capture your videos using the free download HDV Split?

• How to merge video projects into Adobe premiere elements 14

  I am running Adobe premiere elements 14 on an imac and I built two projects that I am trying to merge into a single project. Is it possible to do without exporting to a video file, so I can still change the two projects into one project? Thank you in advance!

  but this does not change the project more.

  That is right. Elements doesn't have the ability to import a project into another project.