Adobe Premiere Elements 13 - DVD Audio output

Similar Questions

• Some of the Menus Adobe Premiere element cause DVD burning failures?

  Some of the Adobe Menus cause DVD burning failures?   What should have been a project of 10 minutes for a small 4 minute video took hours as burning DVDs stopped at 4% and then gave a message of "something has prevented completion in progress DVD burning".  I could finally solve it down for the Menu template, and when an audio clip looping has been added.  The Menu was built for an audio clip loop, but when I removed it the fine burned DVD.

  Since my last post, I checked that my drivers are up to date.   Driver updates were made to the display card Intel HD 4600 Graphics and Chipset Intel 8 series/C220 family SATA AHCI Controller.

  I created a new project and changed the flow of work to remove the check mark from selection to 'Add Menu markers automatically for me'.   When the menu has been selected and displayed, only the main Menu was to confirm that I didn't remove the Menu scenes.   At this point, I finished the remaining workflow and tried to burn on DVD using the stated parameters previously.   However, it had the same failed result.

  I went then to the path of Premiere Elements menu bar: Edit > Preferences > General

  The option "use hardware acceleration (works on Intel HD Graphics 2000 and higher)" has been selected.  I unchecked this option and clicked on the OK"" button.   I then tried to burn DVD with DVD NTSC_Widescreen_Dolby preset.

  Success!   The DVD was burned and confirmed to work in older DVD player (AVCHD burning earlier disk did not work in older DVD player, but worked in a new Blu - Ray player).

  It seems that the "use hardware acceleration" option preferred default was the problem in the prevention of burning DVDs.

  A.T. Romano thanks for your quick response and help to solve this problem.

• Why my video's audio is out of sync in Adobe Premiere Elements?

  When I put my video in Adobe Premiere Elements, audio of the video is about 1.5 seconds at the end I contacted 6 reps and have had no help from Adobe support.

  Granuke

  What version of Premiere Elements and on what operating system works - it?

  The audio not synchronized with the video after timeline becomes the content of the timeline?

  What are the properties of your source file? And, above all, where is the from file-camcorder, mobile phone, iPhone, or other. Is the device that records video using a variable instead of a constant rate? If so, be aware that Premiere Elements (many versions) do not work well with the sources files that are saved with a variable frequency. Range of problems of desynchronization of audio should not be able to import the file at all. In these cases, the solution was to take the file in the free program of brake hand to get a version of H.264.mp4 with a constant, rather than the variable, the cadence. And then import this version in the Premiere Elements project.

  https://handbrake.fr/

  Please review, study and give more details. Then we can decide on what was then based on details in your response.

  Thank you.

  RTA

• I am trying to install Adobe Photoshop elements Adobe Premiere elements 13 13 and can't find the serial number. Where is it located? It is a dvd.

  I am trying to install Adobe Photoshop elements Adobe Premiere elements 13 13 and can't find the serial number. Where is the serial number? It is a dvd.

  Quickly find your serial number

• I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade and fade out and the yel

  I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade in and fade out and the yellow line that chart volume takes a strong recovery or dip at the beginning or at the end of the clip, but there is no change in volume when I play back. What I am doing wrong?

  Rickey

  Thanks for the follow-up report.

  Just a lit bulb. Maybe the answer, maybe a spleen.

  Look carefully at the audio track of the timeline in the vicinity of title of the file.

  

  The title of your file audio timeline shows: level of Volume or something else. If something else, click the tiny triangle where

  the red arrow in the screen shot is sharp and select the Volume and then level so that you end up with

  Volume: level as shown in the screenshot.

  Hope it's the factor involved.

  RTA

• Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  Hi, I have a problem with the import of the 4000 SJCAM MOV files. MOV files are in formats supported for Adobe Premiere elements 11. But if I am importing of MOV file, only audio part is imported, part video is not imported. How can I solve this problem?

  haben

  Looking at the specs of your camera (SJCam 4000), we already know what video compression your camera uses. It is H.264.

  A H.264.mov file should be accompanied by a first elements 11. On what computer operating system is your first items 11 running?

  You have the latest version of QuickTime installed on your computer? And, you use QuickTime and first of 11 elements of a

  Account user with administrative privileges? Please go to Premiere elements 11 publish + share/computer/QuickTime to confirm that you will find

  presets it to the choice of QuickTime, it.

  What are the properties of these files H.264.mov - is it 1080 p (1920 x 1080 p 30) 30 or something else? Do you know if this device is registering with a variable or

  a constant rate?

  Please check and review and then we'll decide what next.

  Thank you.

  RTA

• in Adobe Premiere elements 13, exit rendered freezes on an image, here and there, from time to time.

  Hello everyone!

  I am trying to output render a film either in MPG2 or DV Avi

  and when I play the video rendering result regardless of the format, sometimes it freezes on certain images, sometimes it's here, sometimes here.

  Here are the specs:

  Source: (3d animations made with Softimage) 75 shots 40sec max min 2 sec, resulting in 14 min 30 sec Avi movie PAL lower field 720 x 576 uncompressed

  animations are perfect, and play them on the timeline don't show any freezing point.

  for an example of the size: a shot 40sec weighs 1.5 GB

  I use Adobe Premiere elements 13

  my computer is a 2.1 Ghertz two processors 8.1 Windows 64-bit 32 GB RAM graphics card: NVIDIA Quadro K4000

  Thanks if you can help me.

  Dewey Dell 5

  Unfortunately, "new and quick" don't tell me what on your computer. Apple MacBook Air are new and fast - but you'll go crazy trying to edit any serious video on them.

  That said, I agree with you. Uncompressed opinion are not only inefficient format to transfer video DVDs, but they're also massive in size and difficult to transport. But if that's what your customer wants, it's what he wants.

  In the meantime, there is no reason that your finished video playback should freeze on a fast enough computer - unless you use a media player that don't handle some files well. And, if you are viewing your videos with Windows Media Player, you view on a drive that does not support some files well.

  Download the excellent and free VLC Media Player, one of the must have free utilities that I recommend to my books on Amazon. It will play almost any video format, and he's fine play.

• Adobe Premiere Elements 12.1 - how to change the speed of a row of photos on the timeline?

  (Adobe Premiere elements 12.1). I think I went through all the possible explanations using Adobe-videos, www and You Tube. etc., but I'm still too stupid, having not yet seized the response.  I am new to this, and it does everything just for me. If I manually drag the vertical red line along the timeline, then individual pictures presents during the masterscreen above, but they have almost disappeared in arriving at the other. If I press play instead, the red line is progressing fairly well, but still the same speed on the timeline, but I need an explanation to slow down or speed up the clouds-photos that I brought to the timeline. Y at - there someone here who can / will cut out in 5 mm plates of steel for me?  PS. This isn't a normal video, it's 190 photographs of clouds taken with my interval-o-meter, just to know 'how' in Premiere Elements

  faerk

  BTW. I was arrested on my previous effort to get an answer (in Danish): you are not allowed to question here - or something like!  Why?

  The best way is to your slide show in a video output then re-import this video in your project and use Time Stretch to slow down or speed up playback.

  How you do that depends on how you plan to use this slide show. It will be released on a DVD or BluRay disc? Uploaded to YouTube or Vimeo?

• Adobe Premiere elements 12 freeze during playback

  Hello

  I use Adobe Premiere elements 12.0 for about 2 years on a number of devices. I just bought myself a new machine of the host/music studio - Dell XPS 8900, i7 - 6700 k Skylake, 16 GB RAM, soundcard Realtek, double video (vga screens), a VGA port on NVidia Ge Force 645, the other running the INtel HD integrated graphics card displayport VGA.

  In any case, on the new machine, I see issues with reading gel every 20 or 30 seconds at random, how I have to start it up again.

  It's a bit annoying when trying to evidence look an article, but not the end of the world.

  I tried made using another sound card, disconnect the audio (I read on some issues from Realtek), uninstall and reinstall the program. Nothing has worked yet.

  Thanks for any help.

  OK, for those who have the same problem. I solved mine away from the integrated Realtek audio device. I just ran across the same video for an hour with all the time.

  I know that Realtek has caused problems in the past of my reading on this topic and he has certainly proved the case with me. It is a terrible device anyway, so move my audio from the PC to the sound card that normally, I reserve for my recording studio work is a bonus.

• Adobe Premiere elements 14 update

  Trying to move this message to ATR, but I look forward to any advice.

  Thanks for all your advice and help in the past.  I am now in the process

  construction of a new PC running 7.0 Win with 64 GB of RAM, i7, a Wacom

  Tablet, etc. to improve my photo restoration and video transfer business.

  You helped me in the past with the help of Adobe Premiere elements 11 in parameter

  upwards the proportions correct. I was using a telecine machine and

  transfer film to DVD 8mm. I am considering upgrading to Adobe Premiere

  14 items. You have any problems with elongation etc, if I

  upgrade?  I know that sometimes when you upgrade, you have an unexpected

  problems.  All advice is appreciated.

  Thank you

  Dennis

  www.savethosephotos.com < http://www.savethosephotos.com >

  RTA,

  Thanks as usual for your quick helpful answer.  Great tips for download

  a Trial Version of 14.  I'll do it, as soon as my new PC is built.  As

  for the Tablet, my intention was not to use only not for Photoshop Elements.

  for the first.

  Dennis

  www.savethosephotos.com http://www.savethosephotos.com>

  On Wednesday, October 7, 2015 at 13:25, A.T. Romano [email protected]>

• I can't install Adobe Premiere elements 11

  I can't install Adobe Premiere elements 11 of my DVD. I tried to download the trial online version, but that no longer works. I tried to use Internet Explorer 9. I had 6 GB of RAM and 650 + GB hard drive.

  It's actually a problem installing windows, nothing to do with Adobe. It seemed strange that I bought a new laptop with window 8 on it, so I did not understand why there was a problem with the windows service install. I contacted Adobe Support and a technician remotely took control of my laptop and solved the problem by repairing the windows service install and installation and execution of system update tool. I installed BEFORE 11 after that.

• Application of subtitles in Adobe Premiere elements 3

  Hi all.

  I am very new to Adobe Premiere elements 3 I was necessary to the understanding of the aspects of it for my new job. One of the aspects that I want to look at is the ability to add in subtitles. So, for example, I have some excerpts from DVD that was cut with no current subtitles (in about 2-3 minutes each) and was hoping to add captions to accompany the narration for those who have hearing difficulties. Is it possible through first elements 3? If so someone might be good enough to let me know how?

  Thank you very much and I look forward to hearing back soon.

  Kind regards

  Harj

  Harj,

  If you have installed additional content (separate downloadable file separately or DVD), you should have a lot (not sure the casual count) titles of lower third. Also, you can create according to your needs. Usually with subtitles, the design is very clean and simple, so there is not much "design work" required. However, you might want to do something simple, such as adding a form to give good contrast for text and also to keep the details of the underlying video it clutter.

  A tip, I like to keep any title text on the screen about 1.5 x as long as it takes to read it.

  With real subtitles (as created from SCC files in yet), I find that too, too fast to really allow the Viewer to read. I hate when that happens.

  Good luck

  Hunt

• Sony HDR-SR12 Windows 8.1-compatible 64-bit and Adobe Premiere elements 11?

  Hi can someone advise if the Sony HDR-SR12 camcorder is compatible with 64 bit Windows 8.1? The site compatibility 8.1 win was not clear.

  Can anyone adivse whether AVCHD files can be imported from the drive hard Sony HDR-SR12 or appropriate in Adobe Premiere elements 11 memory cards? I could not find the camera listed as supported, but may not have looked in the right place.

  Can anyone confirm if the AVCHD files can be imported from the HDR-SR12 in Corel VideoStudio Pro X 7? It seems to me that they can.

  Hoping someone can enlighten before that I spend over $ 500 on a second hand unit that I'm very interested.

  Regards, Phil

  Thank you Paul. I'll buy the camera. I discovered that the first items 11 supports the HDR-SR12E as well. Appreciate your reply and you will indicate the problem as solved. -Sincerely, Phil

• Adobe Premiere elements 14 accidents

  Hi adobe forum.

  I recently bought Adobe Photoshop elements 14 and Adobe Premiere elements 14.

  While I can start Photoshop, I can't do it with first. Whenever it crashes, and the ugly windows error message appears as shown in the png file attached.

  While waiting, and not by clicking on "Abbrechen" (which is identical to cancel), I offer myself to debug this problem, but even when I choose to do, nothing happens.

  My system is as follows:

  10 Pro 64-bit Windows

  I7

  8 GB RAM

  207 GB left on my HD

  I have installed Visual Studio 2015 and several other development tools. More details if necessary.

  I really want to use this program, otherwise I have to give back the license and get my money back.

  Any help appreciated,

  Torben

  EventLog SAIS as follows (in German, unfortunately):

  Fehler beim as "C:\Program Files\Adobe\Adobe first Elements 14\MPEGHDVExport.exe" Aktivierungskontextes Generieren. Die HPLC Assemblierung "Plug-ins and #x5c; Common & #x5c; TSStrider, type = "win32", version = "1.0.0.0" ' konnte nicht found werden. Use Sie eine Haltung as diagnose das Programm 'sxstrace.exe.

  My translation:

  Generation failed for "C:\Program Files\Adobe\Adobe Premiere Elements 14\MPEGHDVExport.exe" activation context Assembly dependend "Plug-ins and #x5c; Common & #x5c; TSStrider, type = "win32", version = "1.0.0.0" "is not found. For information, use the program 'sxstrace.exe.

  So basically, an assembly is missing on my system. What is TSStrider?

  [Left first Pro for first items - MOD]

  You must contact Adobe customer via chat service.

  https://helpx.Adobe.com/sea/contact.html?step=PRE_adobe-ID-signing-in_stillNeedHelp

• Download Adobe Premiere elements Fail test! --[- Cannot install on Vista]

  Hello!

  I want to download the Trial Version of Adobe Premiere Elements, but it won't let me.

  You see the screenshot in the link below:

  

  You see the screenshot, the so-called "sorry, this Page is not available.

  Could someone solve the problem of the Web page, one of the Webdeveloper?

  By the way:

  I took this for Windows Vista Home Premium SP2 32-bit.

  Hopefully, this could be resolved as soon as possible!

  Thank you!

  Best regards, MP.

  Hi, John Waller!

  Thank you!

  Okay, I found the old Version BEFORE here:

  First elements download | 10, 12, 14, 11, 13

  Best regards, MP.