Adobe Premiere: 'I-beam' timeline control

Similar Questions

• Adobe Premiere Elements 12.1 - how to change the speed of a row of photos on the timeline?

  (Adobe Premiere elements 12.1). I think I went through all the possible explanations using Adobe-videos, www and You Tube. etc., but I'm still too stupid, having not yet seized the response.  I am new to this, and it does everything just for me. If I manually drag the vertical red line along the timeline, then individual pictures presents during the masterscreen above, but they have almost disappeared in arriving at the other. If I press play instead, the red line is progressing fairly well, but still the same speed on the timeline, but I need an explanation to slow down or speed up the clouds-photos that I brought to the timeline. Y at - there someone here who can / will cut out in 5 mm plates of steel for me?  PS. This isn't a normal video, it's 190 photographs of clouds taken with my interval-o-meter, just to know 'how' in Premiere Elements

  faerk

  BTW. I was arrested on my previous effort to get an answer (in Danish): you are not allowed to question here - or something like!  Why?

  The best way is to your slide show in a video output then re-import this video in your project and use Time Stretch to slow down or speed up playback.

  How you do that depends on how you plan to use this slide show. It will be released on a DVD or BluRay disc? Uploaded to YouTube or Vimeo?

• How to add video effects to images in the timeline in Adobe Premiere Pro CS6?

  Hello

  Can anyone help me please with the following? I use Adobe Premiere Pro CS6, and I have a sequence of images which I imported it in video editing. I want to apply the effect 'Chained' to all the images, but I'm not able to add the effect to all images at once? I can do one at a time without problem, but it is of course very time consuming when it comes to the thousands of images.

  I've tried highlighting all and CTRL + C, CTRL + V with no luck. Any help would be appreciated, thank you very much.

  Before putting pictures on the timeline, use "Automate to sequence" with the cross dissolve as the default transition. Cross dissolve is not an effect, but a transition.

• Adobe Premiere Elements: Film lasst sich nicht speichern

  Hallo,

  I have Adobe Premiere Elements ganz neu, kenne mich noch nicht gut damit aus especially dementsprechend. Jetzt habe ich einen ca 5-minütigen Film standing und diesen nun speichern möchte. Habe're jetzt schon mit den single tried Optionen der Film lasst sich einfach nicht speichern, kommt immer dieselbe Fehlermeldung: "Fehler beim create movies. Unbekannter Fehler. ».

  Film der ist ein Geschenk und ich IHN unbedingt bis Sonntag (9.08.15) thankyou!

  ICH möchte like IHN so, dass man also auf dem speichern oder zur computer not auf dem iPad Mini playing kann. ICH ware thankful so, wenn mir helfen konnte, dieses problem zu losen lastige someone. ICH kenne mich mit computers nicht sehr gut aus, deswegen ware eine möglichst verstandliche explanation gut . Schön evil vielen Dank im Voraus!

  Daten zu meinem Notebook:

  Windows 7

  4 GB Arbeitsspeicher (3 davon vertretbar)

  32 bit-system

  LG, Alisha

  Alisha

  Thank you for the responses with a lot of important information about your problem. It's OK to write in German. I don't speak or write German, but I can use the translate in the response or use Google Translate or Bing Translate. We will find a way to communicate.

  Top of the list to check

  1. the latest version of QuickTime installed on your computer

  Please open QuickTime player on your computer and navigate to its information Menu/About Quick Time Player. Is the version number here indicated as 7.7.7?

  If this is not the case then please download and install the latest version of QuickTime on your computer with Premiere Elements.

  Apple - QuickTime - Download

  2. run the program to a user account with administrator privileges and apply run as administrator.

  a. right click on the desktop for first 13 items icon and select apply Run As Administrator.

  b. navigate to the account user/screen control and determine if the label for your user account includes the word administrator.

  Next on the list

  1. in the open project (Expert workspace), expand the Timeline with the - + cursor above the timeline and look for gaps in the chronology of content as well as for any irregularity in lots of text tiles and placement of any transition.

  2. There is the issue of computer-related resources elements first 13/13.1 on Windows 7 32-bit as a 32-bit application, 3 GB of RAM or less, your space probably about 200 GB of free hard disk or less.

  a. what type of a project of your I - standard definition 720 x 576 or high definition 1920 x 1080? You can check that by accessing the Menu/project to change settings/general and see what is there for the size of the image.

  b. what type of video files you make to the project - with compression DV as DV AVI or AVCHD compression or other?

  Lots of text on the video could contribute to the project. But you see prior to export, or only by the continuation of the problems when you try to export?

  What are the dimensions in pixels of the pictures? Photos oversized for project settings can be another factor contributing to project failures. Then he takes the photos resized before use.

  Since your message is "failure to create a framework", my first choice of solving problems of management would be chronology contained irregularities and issues of secondary computer resources.

  Please read the above. Explore the effect of the deletion or reorganization of some of the components of the timeline and then let us know of your progress.

  We can then decide what then.

  Best wishes

  RTA

• How to properly configure a graphics card for SpeedGrade, Adobe Premiere Pro and After Effects?

  Okay, so I have the following system configuration:

  2 NVIDIA Geforce GTX 970 s

  5960 X CPU

  MSI X 99 game 7 motherboard

  32 GB DDR4 RAM

  256 GB and 1 TB Samsung 850 Pro SSD

  Basically, even if I have the whole system built together, I'm not sure how check and know whether or not Adobe Premiere Pro is in fact using the map graphic or not.  I know it has to be using some of them, otherwise it would not run correctly (as I discovered a recent experience).  However, I don't know if there is, perhaps, some settings in the NVIDIA Control Panel that must be configured so that Premiere Pro can use the card to its full potential.  Here's an example of what I'm talking about:

  

  In other words, they are (I'm sure) all of the default settings of the Control Panel applies to Premiere Pro.  However, I don't know if there are any parameters here that I should change or not.  So what I'm looking for an answer to this question:

  • What parameters, if any, should change for Premiere Pro (as well as other adobe applications that can use all the force of the 970 GTX)?
  • How can I check the GPU activity it is applied during rendering?  (For example, I can check with the Task Manager, CPU usage while I made to see that it is used at 100%).
  • If, perhaps, something goes wrong and even with the right settings, say that the card still is not fully used, what other settings can I change to ensure that the GTX 970 is fully used by Adobe first Pro/After effects/SpeedGrade CC 2014?

  If you want a reference point to measure the performance of Premiere Pro to your: drive system, GPU and CPU use our first Pro BenchMark (PPBM)

  When you finish running the test and then run the script, you will get this report

  

  In this case the result of my laptop (with a GTX 765 M GPU and SSD drives)

  1. The disk performance are explicit.
  2. Number 2 is a very complex timeline of seven layers with heavy assistance from CPU and GPU, without hardware acceleration GPU (processor only) should be longer than 1350 seconds.
  3. Three above is a measure of a chronology exaggerated using many, many GPU MPE accelerated effects and characteristics using a GPU to 99% of load (54 seconds above) and an export-only CPU of the same timeline (802 seconds).

  If you want to compare your results to others, that you need to register on the site PPBM7 to see the results.

  EDIT! I corrected the number 2 above originally, I said 900 seconds, but he was really longer than 1350 seconds

• Adobe Premiere elements 13 crashes at startup.

  At the start, "Adobe Premiere Elements 13 has stopped working" error, and clicking on debug does nothing. I run Windows 10, but this is the first problem I've had since the first purchase. I created this new thread because I can't find an effective solution in any thread. Any help, or a link to a thread that I neglected, would be greatly appreciated.

  Edit: I don't know if that helps, but the specific program, it stops on the start is ImporterQuickTime.prm

  Thanks for your comments. The key to mine is shift + f10, but I did see an option to restore the default value, and I can only assume that's been there forever. I also tried to reinstall the first, but it only starts for a second before crashing with the same error.

  Update: after 4 hours of watching Adobe supports tinker with my files, they concluded it was my Nvidia GTX 765 M graphics card causing in problems with Adobe Premiere. After a little handy, I found that if I go to the Nvidia control panel-> manage 3D-> global settings settings-> and put "Graphic processor preferred" for automatic selection, the issue is fixed.

• Makes me nuts. Adobe Premiere Pro CC - Mp4 fine but Choppy in playback and export.

  It's driving me crazy. I can't find anything about my situation.

  I transfer all my VHS tapes & tapes Hi8 using Blackmagic Media Express. They fired to the mp4 format, but the sound was a little out of sync so I went to fix this in Adobe Premiere Pro CC because I'm adding titles in any case. The original mp4 file works perfectly. But when I import it into Adobe CC he plays rough AND when I export, the new ground thus plays file. I tried using a converter that makes the works, but the video does not look more good. This is my first post so I apologize if I lack info.

  I have a...

  Mac Pro (end 2013)

  Processor 3.5 GHz 6-Core Intel Xeon E5

  32 GB 1866 MHz DDR3 ECC memory

  Start drive Macintosh HD

  Graphics AMD over-pants D700 6144 MB

  Any help at all will be greatly appreciated. Thank you!

  The problem is obvious, as the sequence frame rate and the output is 14.985 when be 29.97

  I wonder if the mp4 clips captured with the good rate, but first he misinterpreted?

  MediaInfo is a free downloadable software that shows all the technical features of the file source video. First, right-click on a clip in the tray, and then select Properties - what does say for pace?

  Try this - open a new project, import your mp4 clips captured. Right-click and select change > interpret footage and if the pace is not 29.97, change it to 29.97

  Now click with right button and select new sequence of the Clip. Add the clip to the timeline and play, how is it? Check sequence > sequence settings and make sure it is 29.97, and the output should be as well.

  If you have already done a lot of editing and of course don't want to start over, try this. Make a copy of your project. Create a new sequence DV NTSC. Do the thing of frame rate change on source clips in bin. I think that you may be able to select multiple and modify several at a time. Go to the original sequence with published clips and do CTRL + A to select all, then CTRL-C to copy, then go to the sequence of NTSC DV you did and paste with Ctrl + V.

  If all goes well, he takes the work you have already done and make a beautiful sequence of 29.97, you can then export to 29.97 and everything is fine!

  Thank you

  Jeff Pulera

  Safe Harbor computers

• in Adobe Premiere elements 13, exit rendered freezes on an image, here and there, from time to time.

  Hello everyone!

  I am trying to output render a film either in MPG2 or DV Avi

  and when I play the video rendering result regardless of the format, sometimes it freezes on certain images, sometimes it's here, sometimes here.

  Here are the specs:

  Source: (3d animations made with Softimage) 75 shots 40sec max min 2 sec, resulting in 14 min 30 sec Avi movie PAL lower field 720 x 576 uncompressed

  animations are perfect, and play them on the timeline don't show any freezing point.

  for an example of the size: a shot 40sec weighs 1.5 GB

  I use Adobe Premiere elements 13

  my computer is a 2.1 Ghertz two processors 8.1 Windows 64-bit 32 GB RAM graphics card: NVIDIA Quadro K4000

  Thanks if you can help me.

  Dewey Dell 5

  Unfortunately, "new and quick" don't tell me what on your computer. Apple MacBook Air are new and fast - but you'll go crazy trying to edit any serious video on them.

  That said, I agree with you. Uncompressed opinion are not only inefficient format to transfer video DVDs, but they're also massive in size and difficult to transport. But if that's what your customer wants, it's what he wants.

  In the meantime, there is no reason that your finished video playback should freeze on a fast enough computer - unless you use a media player that don't handle some files well. And, if you are viewing your videos with Windows Media Player, you view on a drive that does not support some files well.

  Download the excellent and free VLC Media Player, one of the must have free utilities that I recommend to my books on Amazon. It will play almost any video format, and he's fine play.

• Adobe Premiere Pro for Mac CC 2015 does not open.

  Hi, I, ve downloaded Adobe Premiere Pro for Mac CC 2015 and spin OS Yosemite.

  When I try to launch the app, it goes through the boot process and then closes (or does nothing).

  I tried to uninstall and then re - install, but the same thing happens.

  Anyone got any ideas?

  Thanks in advance.

  Having had an online chat with Adobe, they have taken control of my mac and came to the conclusion that it was a permissions problem. They advised me to repair permissions with disk utility. I did and it did not work.

  They also advised me to create another administrator user account, it worked, however it is not convenient switch to another user account.

  In the end I did some research and found this solution.

  If you right-click the hard drive icon, info, unlock the padlock at the bottom and give full read & write to (your username (me)) it will ask you if you want to apply to all the files, I said yes.

  It took a few minutes to complete and then voila, I could open up, no problem.

  I hope this helps.

• Adobe Premiere Pro CC - Visual works, no audio with MOV

  Help, please!

  I have a clip on the timeline that the signal is not triggered, but the Visual works.

  The file is a MOV and appears gray, not blue like other clips.

  This is my first time working with Adobe Premiere Pro CC, so I'm a novice at this program, but not video editing.

  All suggestions are welcome!

  Is there a work around?

  Thank you!

  JANNET

  

  Hi Jacob,

  You have not inserted the audio for this element.

  Click A1 as V1 is highlighted (in blue) once done drag the audio on the timeline and check.

  

  Vinay

• No puedo desinstalar Adobe Premiere Pro

  Hola, hace poco instaled Adobe Premiere Pro CC (2015), one dia para otro pero me daba UN error al iniciarlo than as lo desinstale y vuelva a instalar y al try desinstalarlo con the application of creative cloud me daba error y trate desinstalarlo con una application aside y me appears in creative cloud than esta actualizado el y sigo sin poder desinstalarlo nor abrirlo

  Use of Windows 7

  Hello

  Please see the cleaning of CC for uninstall tool:

  The Adobe Creative Cloud Cleaner tool allows to solve installation problems

  Otherwise, you can uninstall the application from the control panel.

  Kind regards

  Sheena

• Why my video's audio is out of sync in Adobe Premiere Elements?

  When I put my video in Adobe Premiere Elements, audio of the video is about 1.5 seconds at the end I contacted 6 reps and have had no help from Adobe support.

  Granuke

  What version of Premiere Elements and on what operating system works - it?

  The audio not synchronized with the video after timeline becomes the content of the timeline?

  What are the properties of your source file? And, above all, where is the from file-camcorder, mobile phone, iPhone, or other. Is the device that records video using a variable instead of a constant rate? If so, be aware that Premiere Elements (many versions) do not work well with the sources files that are saved with a variable frequency. Range of problems of desynchronization of audio should not be able to import the file at all. In these cases, the solution was to take the file in the free program of brake hand to get a version of H.264.mp4 with a constant, rather than the variable, the cadence. And then import this version in the Premiere Elements project.

  https://handbrake.fr/

  Please review, study and give more details. Then we can decide on what was then based on details in your response.

  Thank you.

  RTA

• Audio playback altered in Adobe Premiere Pro CC2014Sequence

  We started the Assembly of a draft standard CC2014 - we work with the cloud and all our software are up-to-date Adobe said CC

  The project implemented to the point - we've added an audio track - all played back fine.

  As we finished the project we have had to add a second layer of audio as the last piece will be narrated by 2 narrators one until the customer decides who will read what to keep two audio in the timeline panel, and disable the file on the right. (We did this in the past without problem projects.)

  That's where the problems are developed - poltergeist any as re-read us the sequence we hear various audio ghosts (for lack of a technical term) as - hear us the audio stops playing below at a lower level and distortion - but even more strange - audio playing under another part of the timeline is - so if I turned on the file below , I could now hear 3 track audio playback - 2 turned on and to place and one 3rd-audio lower flat and distorted.

  Troubleshooting steps so far:

  I think that hmm... perhaps it is an audio or a 3rd party software problem - I did so to disable all my audio playback software and send the audio to the desktop - problem still there

  I think hmm... maybe it's a corrupted file - so I open a new project file and import the sequence - problem still there.

  I think that hmm... the second audio is maybe a problem - so I delate all the sound elements to add - a single layer of the audio in the project - now the problem there re-routed self to give me the same problems, but always using the audio line in the sequence.

  I think hmm... maybe it's a problem or a question of platform - I played this sequence back on 3 different computers, ranging from OS 10.8, 10.9 to 10.10

  Some with and without 3rd party software. -problem still there

  After 45 minutes on hold with Adobe - they agreed it needs to be examined by a specialist software - connect and chat - they ask to connect to the desktop - and unfortunately we are disconnected - no call back as of yet.

  Anyone with ideas - I've heard of and seen a lot of problems with 3rd party but I trust, I ruled that - I too confident that this isn't a platform or a conflict of OS.

  It really looks like a corrupted file or a bug in the software.

  Audio files are a standard .mov file is saved with Adobe Premiere Pro 2014 CC capture mode.

  Video files are nothing out of the norm for us - variety of photos, graphics, videos, assembled in a deliciously funny and wonderful way.  Wish just that we could get the audio to work.

  Hi valeriav80637310,

  Welcome to the Adobe forums. We regret the inconvenience that you are currently experiencing with Premiere Pro.

  Please try these steps and let us know if it works:

  1. go in the preferences > media and clean the cache and re - open first to check on the issue.

  2. create a new sequence of a clip that you used in the project by right-clicking and selecting 'new sequence of the clip.

  -erase the media in the new sequence

  -Copy all the files from the original sequence and paste them into the new sequence

  Check on the issue and please let us know more communication.

  Concerning

  Anand Sachan

• Sorry, that a serious error has occurred which requires Adobe Premiere Pro stop. We will try to save your current project.

  Whenever I have put a video in the timeline of the sequence, this error message appears, "Sorry, a mistake that requires Adobe Premiere Pro to stop. We will try to save your current project. "and then the first crashes.
  
  I tried to uninstall all of the products and then reinstalling, and the problem is still there.

  What can I do to fix this?

  @RoninEdits, thanks for the reply.

  But yes, I have tried both the Mercury Playback Engine GPU acceleration AND software only and it is the same problem with both.

• Using a NAS with Adobe Premiere?

  Hey!

  So, long story short. Me and a few guys edit video for ourselves or others. There are now a few of us who work at the same time sometimes, 2-4. Manage all this media we sometimes get on with different drives everywhere and different versions of projects Gets a little messy. If we wanted to have a central location where we can draw media from and change.

  We think goes in the direction of NAS and I pulled a few parts from NewEgg which seem to to adapt us.

  Here's my question:

  How exactly does Adobe Premiere and a fair NAS LAN?

  And as I understand it, if media files are on the NAS and the project files are on our work computers, if we open our computers that will playback, record, export and not the NAS that's all small little CPU.

  Fix?

  TL DR: when you work with a SIN, is SIN with the media on this subject, or the computer with the project file, that you work the who did the treatment. What happens if the project file on the NAS and open from a work computer?

  Additional

  If you're asking about the NAS specs, I looked on NewEgg:
  * Micro ATX intel motherboard with 6 SATA III

  * 3.0 GHz iCore 3

  * 60 GB SSD for OS (FreeNas)

  * 4X2TB Western Digital Green, storage media and readers to share on the network

  * 8 GB OF DDR3 MEMORY

  There are a lot of discussions here on the nas, if you want to see the problems others have ran using nas or network shares...

  a nas is a computer, but he doesn't have the processing of the adobe project. It transfers only the requested data (video files) on computers on a network. This does not add a middle man, as the two computers talk to negotiate the transfer of data, vs. a direct connection and control using an internal hard drive or usb.