How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

Similar Questions

• How to solve my problem with the microphone?-it does not work normally (his jerky) after application of the reductions of noise/restrictions

  Hi il. I recently installed Adobe Audition7.2 on my windows 8.1 and I noticed the button sound recording from the microphone inside the program is disabled while at the same time, I could record using other programs on my windows. I worked with my AU and eliminate the background of an old audio recorded sample. ((mon micro intégré est donc bruyant) noise) I chose a very noisy place and crossed the effect / noise noise reduction of the restrictions/print capture. And then I went through effect / restrictions/noise reduction noise reduction process and apply the settings. Although it works and my sample file has improved (without noise), I encountered another problem, my mic does not work normally both in AU and other windows software. The recorded sound now go offshore and (rough) while recording. How can I solve the problem?

  I also followed the instructions on this link https://forums.adobe.com/thread/1546014?start=0 & tstart = 0 and installed ASIO4ALL... but this isn't work, the program may not work correctly for me.

  
  

  Thank you for your attention.

  If your microphone is sounding restless that you save (rather), there is problem on your Windows sound settings. As Steve G suggested it sounds like a form of blocking to reduce the noise. I don't know if this is an effect that Windows 8.1 can do to the incoming audio signal. If you find a way to turn it off.

• After download of internet explorer 8 every time that it opens, I have to maximize the window, whywill it does not open full screen?

  After download of internet explorer 8 every time that it opens, I have to maximize the window, whywill it does not open full screen?

  "titch hill" has written in the new message: * e-mail address is removed from the privacy... *

  After download of internet explorer 8 every time that it opens, I have to maximize the window, whywill it does not open full screen?

  You double click on an icon to open Internet Explorer?

  If so, right-click on the icon and select Properties.
  Select the shortcut tab.
  Change the value of the "run:" Maximized field
  Click on apply, then OK

  Next time that you double-click the icon, it is a maximized window will open.

• File in the windows Explorer 8 does not open

  Hi everyone, I hope that all do you well

  I have problem with my file Explorer in windows 8, that it does not open when I click on file Explorer it stop for a period and relatives and so on

  the hope of finding assistance; Thank you for all

  Hello

  Each method/step below progresses to another if the first does not all corrupted files which are, etc..

  Have you read this information from Microsoft on the repair of errors and corrupted system files?

  «Use the System File Checker tool to repair missing or corrupted system files»

  https://support.Microsoft.com/en-us/KB/929833

  _________________________________________________

  And these eightforums.com tutorials are very detailed for the problems resulting from Scan SFC:

  "How to run the command" SFC/scannow"at the start or in Windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/3047-sfc-scannow-command-run-Windows-8-a.html

  Read it in conjunction with the rest of the information they give link above.

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If not, then run the Dism/online/Cleanup-Image /RestoreHealth command to repair damage to the component store,

  Repair-WindowsImage-online - CheckHealth

  Repair-WindowsImage-online - ScanHealth

  Repair-WindowsImage-online - RestoreHealth

  Restart the PC afterwards, and then retry the command sfc/scannow .

  If still no, then try using ONE OPTION above to run the command sfc/scannow at the start

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the section THREE OPTION to manually replace the files SFC could not fix.

  __________________________________________________

  "How to update windows 8 and 8.1" . "

  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  Refresh your PC goes like this:

  • The PC starts in Windows RE (Recovery Eenvironment).
  • Windows RE scans the hard drive for your data, settings, and applications and puts them aside (on the same drive).
  • Windows RE installs a new copy of Windows.
  • Windows RE restores the data, settings, and applications, which it set aside in the newly installed copy of Windows.
  • The PC reboots into the newly installed copy of Windows.

  _________________________________________________

  "How to reset Windows 8 and Windows 8.1" . "

  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  "When you reboot your PC, the drive will be completely reset and all your applications and your files will be removed it." Windows 8 will be reinstalled, and you need to change any settings, and then reinstall all the apps you want to come back after the reset. If you know if all the files you don't want to lose, then you must back up these files before you start resetting.

  See you soon.

• My computer hangs at the Windows loading screen OR blue screen comes up saying I need to install the hardware.

  Hi, I recently got a computer and I just realized that whenever I turn it on after a long period of time (eteindre turn off during the night, turn it on morning) my computer freezes at windows startup screen. Sometimes a blue error screen appears and after reading it, I would say that a material is not installed correctly. After graduating with my computer, I am sure that I have installed the latest updates, but im not sure what is causing this problem.

  Would be very happy to help!

  Thanks a bunch! : D

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Trying to fix the windows defender who does not open

  Tried to start wuaueng and got this message "the c:\windows\system32\wuaueng.dll module was loaded but the call to SDllRegisterServer failed with the error 0x80070005.

  Hello

  ·         Which version of Windows Vista you are using?

  ·         Do you have an antivirus installed on your computer?

  ·         Did you of recent changes made to your computer before this problem occurred?

  I suggest you to follow the troubleshooting steps in the article below and check if that helps.

  http://support.Microsoft.com/kb/555962

  Hope this helps,

• The window Media Player does not open since applying a skin

  I applied a skin to media player, which crashes, because then whenever I try to launch the media player I get the message; Windows Media Player has encountered a problem and needs to close, by looking at the error report it says error signature; AppName AppVer ModName ModVer Offset 00003179 1.0.0.1 albumart3d.dll 11.0.5721.5145 wmplayer.exe (I can get the full technical report) I am running Windows XP SP3. I tried to roll back the media player, it still doesn't load, then I have updated again, it's same thing, I cleaned my registry verified virus you name I did, it seems as if the media player is trying to load in the mode of the skin which crashed it original course if I can't open the media player I can't turn off the skin. Should I delete all the skins and visualizations manually through their records or which would make it the worst?

  I've sorted it, went ahead and deleted the files in any case that he can't do worse as it don't work and voila, I have music :)

• Error - there is a problem with the external Setup program and it must be closed when you try to install windows updates

  Original title: How can I fix external MSI?

  When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed.  Updates will not be installed.  Anyone know how to solve this problem...?

  Hi John,.

  ·         You are able to install other applications on the computer?

  It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.

  http://support.Microsoft.com/kb/923100

  Hope the helps of information.

• I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

  Try a reset...

  Force restart your iPhone: tap on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, tap settings > general > reset > reset all settings

• Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

  Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

  I hope this helps...

• Windows Media Player does not open the .tgz files

  Original title: codec .tgz files

  My Windows Media Player does not open the .tgz files

  Hello

  1. what happens when you try to open the .tgz files?

  2. what version of Windows Media Player do you use?

  .tgz file is not supported by Windows Media Player.

  You can use your favorite search engine to download and install the latest codec for Windows Media Player. Subsequently, check if you are able to read .tgz files.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  
  Reference: information about the types of media files that supports Windows Media Player

  Package of Installation of codec

  Hope the helps of information.

• Windows Live Mail does not open. Contacted the help people who told me to uninstall Windows Live and start over, but my computer won't uninstall it?

  Windows Live Mail does not open. Contacted the help people who told me to uninstall Windows Live and start over, but my computer won't uninstall it? Back to the use of Windows Mail, but now some of my emails are not received by some of their recipients even if they seem to send and there is no error message. It is not a server problem, as everything goes through, if I send directly from their site. Help please.

  original title: Windows Live Mail does not open.

  Hi Fenellacat,

  Here are specific instructions on how to remove and reinstall Windows Live Mail.

  http://support.Microsoft.com/default.aspx/KB/938275

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

  big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

  Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

  You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

  But first, give us details about your configuration:

  STANDARD TEXT:

  Note that it is standard text.

  If you give complete and detailed information on your configuration and the issue,

  as your platform (Mac or Win),.

  accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

  your settings in Photoshop > Preferences > performance

  the type of file you were working.

  specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

  What troubleshooting steps you have taken so far

  what you receive, error messages

  If problems of opening raw files also the exact camera brand and model that generated

  If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

  A capture of your settings, or the screen image could be very useful also,

  etc.,.

  someone may be able to help you (not necessarily this poster, which is not a Windows user).

  Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

  http://forums.Adobe.com/thread/419981?TSTART=0

  Thank you!

• Window Live Mail does not open the wmv files.

  Window Live Mail does not open the wmv files.  It comes up with an error that says: (wrong parameters).  Also gives the path that looks all wrong.  How can I change these settings?

  If I save the wmv on my desktop it will open, so I think that the file association is OK.

   
  1. download and save the attachment to the office.
  2. right click on the saved file.
  3. Select: Open with on the shortcut menu.
  4. click on: choose [default] program.
  5. Select: Windows Media Player.
  6. check: always use the selected program to open this type of file.
  7. click on OK.
   
   

• I installed the beta version of lightroom 5 when he was 1, it does not open, I installed the current version through creative cloud, it will not open either.

  I installed the beta version of lightroom 5 when he was 1, it does not open, I installed the current version through creative cloud, it will not open either. I tried to delete the preferences.agprefs file, did not help. Lightroom 4 runs normally. I use Windows 8.1

  They said that nothing happens when they begin to LR.  It is a symptom that began with LR 5.5 or whatever the first version which was installed after that, where for me deletion of content but do not delete the folder SLCache, itself, is what worked for me:

  Different things to try are listed here, where the Solution 4 is what worked for me:

  https://helpx.Adobe.com/Lightroom/KB/unable-launch-Lightroom-55.html