Advance planning of the supply chain

Similar Questions

• The launch of supply chain

  Hi all:
  
  I use advanced Supply Chain Planning tool in collaboration with Oracle Process Manufacturing for hardware and resources planning. In the process, I made all necessary settings and got the point of the Supply Chain planning process. However, after I start the process, the parent process has triggered a child lots of concurrent requests in the background. And I was stuck with the concurrent running forever requests in the last 8 hours without end. The status is 'normal' and 'running' for all concurrent requests...
  
  Navigation:
  Advanced supply chain Planner
  Navigate: Supply Chain Plan - Workbench
  
  No idea why?
  
  Thans
  Sandeep Penumalli

  Hi Sandeep,

  Make sure that the concurrent Manager (probably the standard Manager) has enough available to deal with workers in the process. The increase if needed.

  Best regards
  Geert

• Ahead of Supply Chain Planning

  Hi Hussein.
  
  
  I installed instance R12 VISION using the default options.
  "Advance Supply Chain Planning" installed in default? If this is not the case, how can I install it separately.
  
  
  
  Thank you very much

  Hello

  Check of OAM if the product is approved or not.

  In addition, please see (Note: 733189,1 - Notes of installing Oracle Advanced Planning R12.1.01).

  Kind regards
  Hussein

• How to install the tools 8.51 people & EP end & Supply Chain Management 9.1?

  I try to get a minimal installation of 8,51 PeopleTools and PeopleSoft Enterprise finance and Supply Chain Management 9.1 - revision 1. I installed Oracle Linux R5 U5.
  
  I downloaded the following files for Oracle edelivery.oracle.com site.
  
  PeopleSoft Enterprise - PeopleTools 8.51 Media Pack v1: (Y = downloaded & N = not downloaded)
  
  V17270-01 - Y - Oracle PeopleSoft Enterprise quick reference Guide - Version 10
  V22324-01 - it - PeopleSoft Enterprise PeopleTools 8.51 install Supplemental Information
  V22547-01 - it - PeopleSoft Enterprise PeopleTools 8.51 disc 1 of 3
  V22548-01 - it - PeopleSoft Enterprise PeopleTools 8.51 disc 2 of 3
  V22549-01 - it - PeopleSoft Enterprise PeopleTools 8.51 Disc 3 of 3
  V22345-01 - N - Site of the library of documents online (1.0) for UNIX
  V22347-01 - Y - Site of the library of documents online (1.0) for Windows
  V22351-01 - N - Document online generic library Site (1.0)
  V22352-01 - Y - Document library file WAR of Application (1.0) online
  V22322-01 - it - PeopleSoft Enterprise PeopleTools 8.51 PeopleBooks
  V22550-01 - it - PeopleSoft Enterprise PeopleTools 8.51 Verity
  
  
  PeopleSoft Enterprise - Financials v7 & Supply Chain Management 9.1 Media Pack
  
  V20864-01 - it - PeopleSoft Enterprise finance and Supply Chain Management 9.1 Installation additional information - review 1
  V18507-01 - it - PeopleSoft Enterprise finance and Supply Chain Management 9.1 - revision 1 (including Service Pack 1)
  V18507-01 - it - PeopleSoft Enterprise finance and Supply Chain Management 9.1 PeopleBooks
  V20280-01 - Y - PeopleSoft Enterprise finance - and Supply Chain Management 9.1 Maintenance Pack 1
  V21526-01 - Y - PeopleSoft Enterprise finance - and Supply Chain Management 9.1 Maintenance Pack 2
  V22551-01 - Y - PeopleSoft Enterprise finance - and Supply Chain Management 9.1 Maintenance Pack 3
  V23740-01 - Y - PeopleSoft Enterprise finance - and Supply Chain Management 9.1 Maintenance Pack 4
  
  Issues related to the:
  1 have I downloaded the correct files to get a minimal installation? If this isn't the case, you have a list of the files needed? You pleaseo share this list?
  2. do you have a written task llist order, that the software needs to be installed? If so, please share this list?
  3. I downloaded the 32-bit versions of Oracle Linux, PeopleTools and end of PS and SCM software. Is it possible to install using32-bit? Should I have downloaded 64-bit software?
  
  Thank you very much.
  See you soon!

  1 have I downloaded the correct files to get a minimal installation? If this isn't the case, you have a list of the files needed? You pleaseo share this list?

  V22352-01 - Y - Document library file WAR of Application (1.0) online

  For a minimal installation, it is not required.

  V22322-01 - it - PeopleSoft Enterprise PeopleTools 8.51 PeopleBooks
  V18507-01 - it - PeopleSoft Enterprise finance and Supply Chain Management 9.1 PeopleBooks

  For a minimal installation, it is not required. Especially since they are available online http://www.oracle.com/pls/psft/homepage

  V20280-01 - Y - PeopleSoft Enterprise finance - and Supply Chain Management 9.1 Maintenance Pack 1
  V21526-01 - Y - PeopleSoft Enterprise finance - and Supply Chain Management 9.1 Maintenance Pack 2
  V22551-01 - Y - PeopleSoft Enterprise finance - and Supply Chain Management 9.1 Maintenance Pack 3

  It is not required, the MP4 is cumulative (include all previous members).

  2. do you have a written task llist order, that the software needs to be installed? If so, please share this list?

  Read carefully the Guide of Installation of Peopletools, all steps are described (even when you install the application tier): http://download.oracle.com/docs/cd/E18373_01/psft/html/docset.html

  3. I downloaded the 32-bit versions of the Oracle Linux, PeopleTools and PS end & SCM software. Is it possible to install using32-bit? Should I have downloaded 64-bit software?

  You must have a 64-bit Linux, then download the x 64 version of OEL, reinstall it.
  But don't download Peoplesoft, Peopletools and application software are always the same, regardless of the options you choose on delivery (who are by default of delivery options but does not count for Peoplesoft - results returned are always the same) and are 64-bit compliant only.

  Nicolas.

• Mobile supply chain application Vision r 12.1.1

  Forum of HI, I have A Vision of Red hat 5.3 demo instance.
  
  How can I install / activate "* Mobile Supply Chain Application * ' and what will be the port number for the telnet?
  
  Thanks in advance!

  Hello

  Please refer to the manuals of user/application because the steps are covered in the documentation.

  Mobile supply chain applications
  http://download.Oracle.com/docs/CD/B53825_03/current/HTML/docset.html

  Kind regards
  Hussein

• Disable the Passport to the supplier portal Support does not

  I have an existing application for the sale which has been marked as being supported for all devices BB10.  When the passport was released, the current version has been updated automatically show their support for the Passport (which is a hell of an assumption to make, but not the topic of the post)

  As the app is not supported for the Passport, I opened a session in the supplier portal and disabled support for the passport of the current version.  Connection again today, I see that it is still the case.  All the changes you want devices are controlled and passport is not.

  Screen grap of audit this Passport is disabled: http://tinypic.com/r/34gscw9/8

  However, I have just confirmed that in AppWorld, this application is available for the Passport.  Downloaded and installed smoothly (appears broken due to lack of support of passport)

  Did I miss something?  Users are complaining it is understandable that the app is broken for passport and this is wrong our rating

  Thanks in advance

  Hi people,

  A few things;

  (a) before a new device being available in the provider portal (and more if you launch to the public) we send all the BlackBerry World suppliers and let them know the new device, to provide links to resources, etc.  We also note that if your application supports a similar device (and not fail all of the tests made in-house), we will add the new device to your list of supported devices.  The realization of this is not ideal for some/many publishers, we also provide a link where you can opt-out of this process; allowing you to take your time and add the new device on your own schedule.

  (b) If a new device has already been added to the list of devices supported for your applications through the process described above, and that you want to remove, you will need to check your releases which have previously supported the similar device.  In the case of the passport for BlackBerry, you will need to check any release that supports the Q10 BlackBerry and BlackBerry passport to remove from the list of supported devices.

  Hope this helps to clarify.

• Table for the code for method of payment for the suppliers site

  Hi all, does anyone knows how to get the value for the code for method of payment for the suppliers site in R12.1.3? I don't speak from that in the following path: 1 Paybles responsibility 2. Suppliers 3. Request for a 4 suppliers. Click on details of payment 5. Scroll to supplier Sites and press the update button 6. Note that, for example among the payment methods is checked as default thanks in advance, A.Stoynaov

  Hello

  Please check this note that contains the query:

  Default values for method of payment for providers at the level of the Table (Doc ID 737128.1)

  You can use this query to view the lines for a given provider site:

  SELECT *.

  Of iby_ext_party_pmt_mthds IEPPM

  WHERE IEPPM.ext_pmt_party_id IN

  (SELECT IEP.ext_payee_id

  Of iby_external_payees_all IEP

  WHERE IEP.supplier_site_id IN

  (SELECT APSS.vendor_site_id

  Of ap_supplier_sites_all of the PSA, ap_suppliers APS

  WHERE APS.vendor_id = APSS.vendor_id

  AND APS.vendor_name = '. '

  AND APSS.vendor_site_code = ''));

  Concerning

  Joel Purswani

  Support of Oracle

• How to disable the planning to the administrators and interactive users to create or modify rules Manager calc in their application?

  Hello

  According to the designer of Calc Manager 11.1.2.3 Guide and my tests:
  -Planning of the directors may change the rules of Manager of calc deployed in their planning application

  -Planning interactive users can create their own Manager calc of the rules in their planning application

  But according to our governance IT, they are not able to do, especially in a production environment (and they were not able to do planning with HBR 11.1.1).

  Any idea or tip to disable the planning to the administrators and interactive users to create or modify rules Manager calc in their application?

  Thanks in advance.

  Philippe

  I don't think that there is a way to disable. If you look at the shortcut create a shortcut to a business rule, then it just gives you an option to run the rule even on different applications (rather that copy you in applications).

  Concerning

  Celvin

  http://www.orahyplabs.com

• Help to understand the plan of the explain command

  Hello world

  I have a question:

  INSERT INTO ICM_UPSEL_1_ALL

  Select a.customer_no, a.pr_code_bbl, pr_code_pmm, a.score, a.price_diff, a.flag (b.pr_code_pmm) min

  ICM_UPSEL_MIN_PRDIFF_1 a, icm_pre b

  where a.customer_no = b.customer_no

  and a.pr_code_bbl = b.pr_code_bbl

  and a.score = b.score

  and a.flag = b.flag

  and a.price_diff = b.price_diff

  and b.price_diff > 0

  and b.score > = 0.5

  and b.flag = 1

  and b.price_diff > 0 and b.price_diff < = 10

  Group of a.customer_no, a.pr_code_bbl, a.score, a.price_diff, a.flag

  This query runs in a pl/sql procedure.  The plan of the explain for this query command is:

  Hash value of plan: 3124235498

  ------------------------------------------------------------------------------------------------------------------

  | ID | Operation | Name                           | Lines | Bytes | Cost (% CPU). Time |

  ------------------------------------------------------------------------------------------------------------------

  |   0 | INSERT STATEMENT.                                |     1.   143.     4 (25) | 00:00:01 |

  |   1.  LOAD TABLE CLASSIC | ICM_UPSEL_1_ALL |       |       |            |          |

  |   2.   HASH GROUP BY.                                |     1.   143.     4 (25) | 00:00:01 |

  |   3.    NESTED LOOPS |                                |       |       |            |          |

  |   4.     NESTED LOOPS |                                |     1.   143.     3 (0) | 00:00:01 |

  |*  5 |      TABLE ACCESS BY INDEX ROWID | ICM_UPSEL_MIN_PRDIFF_1 |     1.    65.     1 (0) | 00:00:01 |

  |*  6 |       INDEX RANGE SCAN | MPD_1_FLAG_IDX |     1.       |     1 (0) | 00:00:01 |

  |*  7 |      INDEX RANGE SCAN | ICM_PRE_FLAG_IDX |     1.       |     2 (0) | 00:00:01 |

  |*  8 |     TABLE ACCESS BY INDEX ROWID | ICM_PRE |     1.    78.     2 (0) | 00:00:01 |

  ------------------------------------------------------------------------------------------------------------------

  Information of predicates (identified by the operation identity card):

  ---------------------------------------------------

  5 - filter("A".") PRICE_DIFF"> 0 AND 'A '. "SCORE" > = 0.5 AND 'A' "." " (PRICE_DIFF"< = 10)

  6 - access("A".") FLAG "= 1)

  7 - access("B".") FLAG "= 1)

  8 - filter("B".") PRICE_DIFF"< = 10 AND 'B '. "SCORE" > = 0.5 AND 'B' "." " PRICE_DIFF"> 0 AND

  "A"." CUSTOMER_NO '=' B '. "' CUSTOMER_NO ' AND 'A '. "" PR_CODE_BBL "=" B ". "' PR_CODE_BBL ' AND 'A '. "SCORE" = 'B' "." " SCORE '.

  AND 'A '. "" PRICE_DIFF "=" B ". ("' PRICE_DIFF")

  This query runs for 10 hours now and still no results.  Could someone please help me where goes wrong... Why is - it take as long to insert data...

  The number of rows in ICM_UPSEL_MIN_PRDIFF_1: 84 858

  The number of rows in icm_pre: 455,500,944

  All columns are indexed.

  My version of the database is 11.1.0.6 running on windows server 2003 R2.

  Thanks in advance

  This plan seems much more suitable for me: instead of doing > 80 K of the loops of the CBO now decides to make a unique HASH JOIN. I would try to run the operation with the dynamic_sampling flag. If the system statistics are not completely misleading the operation now only takes a few minutes (and no 10: 00 >).

  Concerning

  Martin

• Plan of the hash value for two queries!

  Hello
  DB: Oracle 11g (11.2.0.3.0)
  OS: RHEL 5
  
  I have two question:
  
  1. can two queries have the same hash value of the plan? I mean I have here are two queries:
  
  SELECT /+ NO_MERGE * / MIN (payor.next_review_date). *
  * Payer from *.
  * WHERE payor.review_complete = 0 *.
  * AND payor.closing_date IS NULL *.
  * AND payor.patient_key = 10; *
  
  and
  
  SELECT MIN (payor.next_review_date)
  * Payer from *.
  * WHERE payor.review_complete = 0 *.
  * AND payor.closing_date IS NULL *.
  * AND payor.patient_key = 10; *
  
  When I tried to examine the execution plan for the two motions, the hash value of the plan remains the same. This means that implementation plan for both queries are same? If so, then how Oracle includes or changes to the execution plan based on hint. If not, then what hash value of the plan represents?
  
  2. If the plan with suspicion, and without suspicion is identical except for a given query except the number of lines and bytes. Do you mean this query with fewer lines and scanned bytes is better?
  
  Thanks in advance
  -Onkar

  >
  1. can two queries have the same hash value of the plan?
  >
  Yes - as already said - but it's not just because of tips.

  Here is the example code that I use to show that Oracle does NOT simply use a text version of the query that you propose and compute a hash of it.
  These two queries are radically different but have the same hash value; Oracle are not different at all.

  set serveroutput on
  set autotrace traceonly
  select * from DEPT A, EMP B
  where A.DEPTNO=B.DEPTNO
  
  SQL> select * from DEPT A, EMP B
    2  where A.DEPTNO=B.DEPTNO
    3  / 
  
  14 rows selected.
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 844388907
  
  select * from
  (select * from DEPT) A, (select * from EMP) B
  WHERE A.DEPTNO = B.DEPTNO
  
  SQL> select * from
    2  (select * from DEPT) A, (select * from EMP) B
    3  WHERE A.DEPTNO = B.DEPTNO
    4  / 
  
  14 rows selected.
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 844388907
  

• So I reworked my code and it seems more clear but who always get "RangeError: Error #2006: the supplied index is out of bounds"nonsense. " (CODE + ERROR ATTACHED)

  I reworked the code to make it without error. now, all we are dealing with is the problem of ERROR REANGE. I'm very new to Flash and read responses from people on sites where they solved this problem, but do not understand what people at all. any help would be greatly appreciated.

  Let me explain a little better my problem: I am creating a menu drop-down. everything goes fine UNTIL I'll scroll above the button and get the error. I added an inner glow, etc and it all works very well. I'm only stuck to where the menu is supposed to go down.

  CODE 1:

  var navBtnGlow:GlowFilter = new GlowFilter (0 x 000000, 0.5, 0, 15, 1, 2, true, false);

  navBar_mc.addEventListener (MouseEvent.MOUSE_OVER, navOverF);

  navBar_mc.addEventListener (MouseEvent.MOUSE_OUT, navOutF);

  function navOverF(event:MouseEvent):void {}

  event.target.filters = [navBtnGlow];

  navBar_mc.setChildIndex (event.target as MovieClip, 1);

  dropMenus_mc.gotoAndStop (navBar_mc.getChildAt (1) .name);

  trace ("we rolled on..." + navBar_mc.getChildAt (1) .name)

  }

  function navOutF(event:MouseEvent):void {}

  event.target.filters = [];

  }

  ERROR:

  RangeError: Error #2006: the supplied index is out of range.

  at flash.display::DisplayObjectContainer/setChildIndex()

  to NEWprim_fla::MainTimeline/navOverF()

  Thank you for your help in advance.

  not sure about this, but what happens if you change your setchildindex to 0? in the navOverF function

• Supply Chain MFG Family Pack R12

  Hello
  
  What is the number of patch of Supply Chain MFG Family Pack R12?
  
  Concerning

  Hello

  Recompile all INV and GME PLL and forms after you apply this hotfix? means that I need to generate forms and straight adadmin libraries?

  Fix.

  and how can we give 2 modules name to generate from adadmin, I will be grateful to you if you put a concrete example here.

  There is an example in (Note: 141118.1 - how to re-edit forms library of files using Adadmin) that you can use. For the modules name, enter the name (instead of otn in the document) and generate the forms for each module separately.

  Kind regards
  Hussein

• Hyperion Planning for the day-to-day management of payment in banks

  Hi, all!
  
  I need a customizable review on Hyperion Planning to implement reports on the days, e.g. daily liquidity statement of banks and creation of payment plans? So far I am informed HP works with the months as the shorter period. Thank you very much in advance!

  The time dimension can be customized to accept the daily details.

  We made time for Essbase right thing usually type using cash flow forecasting systems rather than planning however can accommodate this kind of customization.

  There may be some performance issues with the form definition which can be quite important on this type of application.

  Kind regards

  John A. Booth
  http://www.metavero.com

  Published by: Jbooth on December 17, 2009 19:41

• Where can I define the transit time of the supplier?

  Hi Experts,
  
  I have a doubt in the definition of transit time.
  
  Defining the supplier lead time, one of the most important breaking is the lead time of intansit.
  
  I can set the lead time in transit provider "processing time" of the attributes of the element?
  
  And for the CPHA to consider the transit provider for the planning period, where should I set it?
  
  Thank you for your valuable time.
  
  BR,
  Babu Ji

  The addition of transit times to the post-processing of lead time is a bad idea. It will certainly CAWC spit more reschedule messages as necessary. And it can increase your onhand inventory and decrease your inventory turnover.

  Why you want to represent transit lead time separately by the supplier replenishment lead time? That's reduce reschedule the time in transit for the choice of messages?

  Is to install the provider as an org and set transport systems maritime inter-org. You can specify the transit times it.

  Hope that answers your question
  Sandeep Gandhi
  Independent consultant
  513-325-9026.

• Cannot access the application of planning through the workspace

  Hi gurus intended,
  
  I need your guidenace I'm unable to access planning through workspace to help navigate - Application-> planning-> Planapp1 (my request that I created in the planning planning URL); Hyp Workspace Error: Invalid or to find the configuration of the Module; --> required application module HyperionPlanning. It is not configured in planning. Please contact your administrator; --> communication error;
  
  I use Hyp 9.3.1 on windows 2000 Advance Server with SQL server 2005. while I have no problem to navigate directly from URL planning. Evenes am able to load data using the Regional service.
  
  I configured: Shared services, Essbase server, services of the Essbase administrator; Reporting and analysis services, Reporting and UIservices analysis and planning.
  
  Kindly advice.
  
  If possible send me details of correct order of departure services. I need to use planning through the workspace.
  
  Concerning
  Kumar N

  Hello

  Stop the planning server and re configure the planning through the configuration utility.

  Thank you
  TSR