Display/color problem

Similar Questions

• Secondary display color problem

  I've seen several similar questions posted, but I can't seem to understand this one. This question has recently started to happen only in Lightroom 4 and continues to be a problem for me with Lightroom 5. It happens not in Photoshop CS5.

  I have a Dell laptop and a Samsung monitor that I use as secondary display. Lightoom images appear correctly on the screen of the computer, but not on the external monitor Samsung. Both screens have been calibrated with ColorMunki Display. As you can see in the screenshots, other images, like the desktop wallpaper make fine on both monitors. Images in Photoshop CS5 and other image software visualization also make good on both monitors. This issue has not always been a problem, he began to appear about 6 weeks ago. Any thoughts on what could happen? See screencaptures below.

  Thanks in advance for any help you can provide.

  Jon

  LR5 computer laptop screen:

  

  LR5 external display:

  

  The LR5 laptop display:

  

  LR5 external display:

  

  PS5 laptop screen:

  

  PS5 external display:

  

  What happens when you re - calibrate the displays? These symptoms are very typical for the bad monitor profiles. Photoshop ignores just while Lightroom will tip upwards. It is not inconceivable that a software update wiped your calibrated profile and windows can use a color profile canned, which are terrible usuably. Also make sure you have your calibration software to create icc v2 profiles. Lightroom v4 had problems with v4 profiles.

• Satellite A210-127: display colors began to be weird

  Hi friends

  Well I installed win xp pro sp2 on my laptop. I managed to find all the drivers for xp.
  A week ago I noticed that while my laptop worked for about 2 hours or more, the display colors began to be weird.
  A shade of blue covers parts of the screen and in some cases, I see a few icons or a part of the pictures (like desktop) to tremble.

  As I have some experience of it I tried to close the cover (screen) and then to open it to know if the sceer has a problem, but no, the problem was still there.
  I restarted the laptop and everything is ok. AFEW more hours of work and the problem again apeard. I tried a bios update and reinstalled the display drivers.

  The problem was not resolved. So I disconnected all usb devices and battery and rebooted.
  After a few hours, the same problem has happened so I looked in the case where the viewer and that there was no error. I am convinced that I have to blame the display drivers, but I'd like to hear opinions.
  My graphics card is ati mobility radeon 2600

  Thank you

  Hello

  I don t think it is a software problem and therefore in my opinion the update of the graphics driver is simply not necessary.
  For me, it looks like a hardware problem. Probably the fault of operation of the FL-ups!

  I recommend to connect the external monitor to the laptop while the shade of blue is displayed on the internal screen for laptop!
  If you see the same thing on the external monitor that maybe the GPU causing this strange issue.
  But if the problem isn't on the outside monitor then either display laptops or the FL inverter causes this problem.

  In both cases it s advisable to contact the service provider allowed in your country, because the part which malfunctions must be replaced.
  I think that the guarantee is valid and this is why everything should be done for free!

  Good luck

• Color problem

  My monitor has a color problem that needs fixing, the color is not right or true to life... How can I fix?

  A little more information please. What model Mac? Year? What you see or what the app (s) do you use which shows the aberrant color cast? Did you do the steps in the system preferences of color correction of > displays > color > Calibrate...?

• Unable to run automatic checking of the display colors using command/usr/openwin /.

  Hi all
  
  OS: Solaris 11 x 86-64
  DB: 11.2.0.3
  
  I am trying to install the infrastructure grid + Oracle db 11.2.0.3 on a Solaris 11. I'm used to working with Red - hat, so I don't remember having such a problem. The problem is, when you try to execute "runInstaller" as user oracle:
  

  Checking Temp space: must be greater than 180 MB.   Actual 1527 MB    Passed
  Checking swap space: must be greater than 150 MB.   Actual 2104 MB    Passed
  Checking monitor: must be configured to display at least 256 colors
      >>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Check if the DISPLAY variable is set.    Failed <<<<
  
  Some requirement checks failed. You must fulfill these requirements before
  
  continuing with the installation,
  
  Continue? (y/n) [n] n
  
  User Selected: No

  Doing some research, I found that the solution to this problem would be to install SUNWxwplt package. As you can see below, I have installed all required packages:
  

  root@sol11:/mnt/sf_Compartilhamentos# pkginfo -i SUNWarc SUNWbtool SUNWhea SUNWlibms SUNWpool SUNWpoolr SUNWsprot SUNWtoo SUNWlibm SUNWuiu8 SUNWfont-xorg-core SUNWfont-xorg-iso8859-1 SUNWmfrun SUNWxorg-client-programs SUNWxorg-clientlibs SUNWxwfsw SUNWxwplt
  system      SUNWarc                  Lint Libraries (usr)
  system      SUNWbtool                CCS tools bundled with SunOS
  system      SUNWfont-xorg-core       X.Org Foundation X11 core fonts
  system      SUNWfont-xorg-iso8859-1  X.Org Foundation X11 iso8859-1 fonts
  system      SUNWhea                  SunOS Header Files
  system      SUNWlibm                 Math & Microtasking Library Headers & Lint Files (Usr)
  system      SUNWlibms                Math & Microtasking Libraries (Usr)
  system      SUNWmfrun                Motif RunTime Kit
  system      SUNWpool                 Resource Pools
  system      SUNWpoolr                Resource Pools (Root)
  system      SUNWsprot                Solaris Bundled tools
  system      SUNWtoo                  Programming Tools
  system      SUNWuiu8                 Iconv modules for UTF-8 Locale
  system      SUNWxorg-client-programs X.Org Foundation X Client Programs
  system      SUNWxorg-clientlibs      X.Org Foundation X Client Libraries
  system      SUNWxwfsw                X Window System platform required font software
  system      SUNWxwplt                X Window System platform software

  I also configured the DISPLAY env, and here's where I think I'm doing something wrong.
  

  -- as oracle user (my statis ip is 192.168.0.20)
  -bash-4.1$ export DISPLAY=192.168.0.20:0.0
  -bash-4.1$ xhost +
  xhost:  unable to open display "192.168.0.20:0.0"

  I think I made all the necessary configurations (?). So, where, what Miss me?
  
  Thanks in advance.

  Fabricio_Jorge wrote:
  Hello. Thank you for your attention.

  You see, I installed Solaris 11 on a VirtualBox env (only for the objective test), and I'm connected locally on the virtual computer (make sure you don't connect do not). I installed Solaris with gnome, so I'm now working on a GUI Solaris 11.

  The strange is that the xclock binary is not found (through research).

  You must open directly as an oracle user OS.
  YES fails if you like below

  Su - oracle

• Maj CS5 photoshop color problem

  When I open or copy any image in photoshop, for some reason, it changes colors.  For example if I have a picture that has the text in blue, when I open it in photoshop text becomes Purple.  Everyone knows about this problem before?

  Programs like Photoshop and Illustrator are management while painting and Photo viewer on XP are not colors. Have in mind that the color managed programs use your monitor color space to simulate other destination color spaces and this can cause inconsistency between color and programs without colors. With color managed programs that you must be aware of the color space, that you use to display images. UN-color managed programs can display color only the way in which your monitor's display. So first of all you must decide how you want to display images. The way in which your monitor can display the or the way in which they can appear in other color spaces?

• Color problems: the red color has disappeared from my computer

  Original title: color problems

  The red color has disappeared from my computer. The moniter is ok.

  Hello
   
  You did it changes on your machine before the problem?
   
  It could be a hardware failure.
   
  Things that can be loaded are listed below:
  
  broken monitor cable has...
  b. defective monitor.
  c. faulty graphics card.
   
  You can consider measurements:
   
  Step 1:
   
  Double check that monitor cable is firmly attached. Try the Wiggles, see if the color returns.
  Step 2:
  
  Test another monitor on the PC (Personal Computer), and/or the monitor on another PC.
  Step 3:
  
  You may have a bad cable, or the monitor may be defective.
   
  Step 4:
   
  Right-click on the desktop and select Properties. Go to the tab settings, and report on what choice was filed under 'Color quality' and what is the other choice in the drop-down list?
   
  If there is no choice of color quality better than what you have, you may not use the correct driver for your video card or monitor.
   
  Uninstall and reinstall the drivers for video card and see if the red color appears.
   
  Follow the steps in the link to uninstall and reinstall the video card drivers.
  http://www.Microsoft.com/windowsxp/using/Setup/support/driver.mspx
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• messed up display color

  Display colors are medium - black are blue, red are "purple", etc.

  Hi Rustydog13,

  The first thing I would check is that the monitor cable wiggled loose. Even if it seems trendy I could look a little longer. If that doesn't fix it, you may need to reload the display driver.

  If you want to know the answer just to the display driver.

  Matt
  Matt Cameron

• Active window color problem - cannot change the background color

  original title: Active window color problem

  By right-clicking: Desktop, then click on: personalization / window color and appearance / settings (Advanced) appearance, Windows user can assign a background color of the active window in any application.  This is useful for those of us who don't want a stark white screen; We can assign a mild pastel tint which may be easier on the eyes for long term sessions.

  At some recent point, I lost the background color of the active window within Windows uses 'household.  I still not my background color assigned in any application I run (Word, Mail, etc.), but using Windows Explorer to navigate through my hard drive, the active window is now always the default stark white Windows.  How this change and can it be forced to adhere to the assigned active window background color?

  Hello

  Step 1: Check if the problem continues in a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-user-account

  Step 2: If the problem does not persist in a new user account, then the old profile could have been corrupted. Try the following article to fix a corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Color problem of LABORATORY so that create new Document?

  Color problem of LABORATORY so that create new Document?

  its is possible to open a new Document with the CMYK color Mode

  

  You can create a new document with tasks defined in CMYK profile and save it here:

  /Users/ [username] / Library/Application Support/Adobe/Adobe Illustrator 19 / fr_FR / New Document profiles

  Why would you do that, though? The laboratory is the best way to represent a blot of ink, if you print with the tones, and if you're not, it is best to not use them.

• When Lightroom does not display color space?

  When Lightroom does not display color space is assigned to an image? It should be in the metadata Panel. In Bridge, it displays color Mode: RGB/B & W and color space: sRGB/Gray Gamma 2.2. Or Lightroom all converted Adobe RGB or ProPhoto RGB?

  The ExifMeta plugin (free) will show the color profile in the metadata Panel.

• Need to display color on top of the region of the table.

  Hi all
  
  In my page, there are 3 table, just on the side of the region of table need to display green space (header) for each table.
  is it possible to display colors in the OPS?
  
  Please help me on this.
  
  Robet

  Code:

  OARowLayoutBean RowLayoutRN1 = (OARowLayoutBean) webBean.findChildRecursive ("RowLayoutRN1") ;---Id

  CSSStyle oraaniltext = new CSSStyle();
  oraaniltext.setProperty ("color", "#000000");
  oraaniltext.setProperty ("background-color", "#ADA96E");

  RowLayoutRN1.setInlineStyle (oraaniltext);

  -Use the same code and let me know... :))

  Concerning
  Meher Irk

• My operating system is Windows XP and the display color quality setting properties automatically by default, low (8-bit) then access to Photoshop, this problem just started.

  Every time I use Photoshop CS5, the color quality setting in display properties by default on bass (8-bit), and I have to change the settings back to the high (32 bit) in order to use Photoshop. This has happened for at least a week; Why this problem persists I don't know.

  Thanks for writing. I have an Intel 82865 G Graphics Controller and I think I have the latest drivers, but your answer refers specifically to a device driver. So I hope to go online at the Intel Web site and search for a device driver. I'll let you know if it works and thank you once again.

  Could try their utility for the identification of such things:
  http://www.Intel.com/p/en_US/support/detect?IID=dc_iduu

• Display refresh problem: Pixellations

  Pixelation occurs only in Firefox. I tried to plug in computer screens and other screens, LOC and the problem is that the same no matter what screen is hung. It only happens with Firefox and not other browsers or other programs on my computer, including the desktop. Because I can't post a screenshot, I will try to describe what I see. The header sidebars and Firefox display a master random gray squares that hide the text as the text menu, but not white address bars. If I move my mouse over the gray block, it refreshes and correctly display the menu icons and text. The passage of the mouse refreshes the text and icons, but not the background of the menu headers or the sidebar. They remain cut upwards with random blocks of color opaque dark squares, rectangles and the combinations of these sizes.

  Hello

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  This solve your problems? Please report to us!

  Thank you.

• Re: Satellite P300 - display colors are not displayed correctly

  A few months ago appeared a strange problem with my laptop screen as you can see in this video made by me: http://www.youtube.com/watch?v=tjpsXNB6prc

  I tried to tilt the cover but without results. Sometimes it comes back normal picture all of a sudden. If I close the lid when I stopped the laptop, when the next market problem appears.

  With the help of Corel, I noticed that the RGB colors are not displayed correctly. I connected the laptop to a VGA monitor and the image was normal.

  I would like to know what the problem is so that I am able to fix it myself.

  Thank you.

  Hey Buddy,

  It of great that you've made a video of your problem, most other users don t do that, but it makes history. :)

  In any case, it is really hard to say what part is causing this problem. Either it's internal display itself or graphics card. Easiest way to check this is connect an external monitor and check what is happening.

  So if it was a normal external VGA monitor image it seems to be the graphics card. This means that the motherboard must be replaced and this can be done from an authorized service provider. Then get in touch with the guy and ask for help.