advantages of Windows 7 service pack 1

Similar Questions

• Product key required for Windows XP Service Pack 2 download.

  I had to back up my data and reinstall Windows, yesterday. I downloaded Windows XP Service Pack 2 installation network for IT professional and developers using Dell's Support Package. Everything seemed to be working fine until I opened a Word 2002 document and asked for a product key. I ran Microsoft Genuine Advantage Diagnostic Tool and product key turns out to be xxxxx-xxxxx-GD6GR-K6DP3-4C8MT. What can I do?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a test free version comes preinstalled when you buy it and that would have been reinstalled, but invalid, when you reinstalled Windows)?

  PS: Your new thread had a response-online http://social.microsoft.com/Forums/en-US/genuinewindowsxp/thread/489138ff-4ad5-4678-895b-2372fe66d13f

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Vista Service Pack 1 install properly

  I downloaded Service Pack 1 several times, but it appears in the list as a major update when I do a search for updates. Service Pack 1 does not appear to have been installed correctly.

  I tried to do a fresh install from the recovery disk, but the problem remains the same.

  The following report was generated after the unsuccessful attempt to use the recovery disc.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: genuine
  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key:
  Windows product key hash:
  Windows product ID: 89578-OEM-7332157-00061
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6000.2.00010300.0.0.003
  ID: {273A995B-E660-4DB2-AF39-75091DDDDA8A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0x00000000
  Build lab: 6000.vista_gdr.100218 - 0019
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 7.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {273A995B-E660-4DB2-AF39-75091DDDDA8A}1.9.0027.06.0.6000.2.00010300.0.0.003x 32 89578-OEM-7332157-000612S-1-5-21-665033281-550049748-2402549587Hewlett-PackardHP G7000 Notebook PCHewlett-PackardF.3320080429000000.000000 + 000B2333507018400FAD 041041 DVasteuropa, normaltid(GMT+01:00)03HPQOEMSLIC-MPC109

  Content Spsys.log: 0 x 80070002

  License data-->
  Programlicenstjanstens version: 6.0.6000.16509
  Namn: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Aktiverings-ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  Program-ID: 55c92734-d682-4d71-983e-d6ec3f16059f
  Product Utokat ID: 89578-00146-321-500061-02-1053-6000.0000-1872012
  Facilities-ID: 004143614560689131029594562133620521664220414003024184
  URL of up to processorcertifikatet: http://go.microsoft.com/fwlink/?LinkId=57201
  URL of up to datorcertifikatet: http://go.microsoft.com/fwlink/?LinkId=57203
  URL of up to anvandningslicensen: http://go.microsoft.com/fwlink/?LinkId=57205
  URL of up to produktnyckelcertifikat: http://go.microsoft.com/fwlink/?LinkId=57204
  Ofullstandig produktnyckel: WQD8Q
  Licenstillstand: Licensierad

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: NgAAAAEAAwABAAIAAQABAAAAAwABAAEAJJQE/Qp6fLYCckaDFHX8U8JQ8vSwQajBzg2sVrIN

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  HPQOEM APIC-SLIC-MPC
  HP FACP SPARTAN
  HPQOEM HPET SLIC-MPC
  START HPQOEM SLIC-MPC
  MCFG HPQOEM SLIC-MPC
  ASF!   HPQOEM SLIC-MPC
  SLIC SLIC-MPC HPQOEM
  SSDT PmRef Cpu0Cst
  SSDT PmRef Cpu0Cst

  1. start your own, new thread in the following Microsoft Genuine Advantage forum and repost your MGA journal, and a clear description of your problem:

  http://social.Microsoft.com/forums/en-us/genuinevista/threads>

  2 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:

  http://go.Microsoft.com/fwlink/?LinkId=52012>

  Try the number listed here appropriate phone: phone numbers Microsoft Activation centers worldwide:

  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx >

  `~`

  Learn how to install Windows Vista Service Pack 1 (SP1)

  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx>

  Windows Vista Service Pack 1 standalone installation) (KB936330)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b0c7136d-5ebb-413b-89c9-cb3d06d12674&displaylang=en>

  UTC/GMT is 10:54 Friday, July 6, 2012

• After the release of windows vista service Pack 2 and flash 10 my system continues to blue screen

  After the last update of windows vista service Pack 2 and flash 10 that my system continues to blue screen, the solution has advised windows that will fix it is to uninstall flash and reinstal, it dosent solution work any ideas? I tried to roll back to Flash 9 and it's less, but happens again... someone has any ideas?

  First, uninstall Flash to make sure that's not the problem.  If the problem persists and if the problem is related to the installation of Vista SP2 (as seems to be the case), then Support Microsoft offers free technical support for installation of Vista SP2 issues at: https://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034&st=1&wfxredirect=1&sd=gn.  They are experts on these issues and you should take advantage of the offer, although it is still free.  I'm sure they will be able to help you.  Minimize (but do not deny) the update of Flash and to focus on the installation of SP2 when you explain the problem.

  I hope this helps.  If this isn't the case, after return and we'll see what we can do.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Toshiba Satellite Pro A10, Windows XP Service Pack 2

  Hello world
  "I have a ' Toshiba Satellite Pro A10: P4 - M 2.2 GHz/XP Pro/15" TFT/40 GB / 768 MB.
  I have installed Windows XP Service pack 2 in my book.
  After the update to Windows XP SP2, the only way to start my computer after putting in "sleep mode" or "hibernation mode" is witch power off and then start up.
  I reinstalled "Toshiba Power Saver", but nothing came of it.

  What can I do about it?

  Kind regards
  Krasteff

  Obviously the Service Pack 2 does not match current preinstalled saver.

  First installation, you have is to wait for an updated version of Toshiba Power Saver, which is XP Service Pack 2 tested. But so far, you have no "Standby" or "hibernate".

  Installation of the second. If you need to "Standby" or "Hibernate" feature, uninstall Service Pack 2 and wait until there is a solution to the problem of energy saving.

  The two sounds is not perfect, but I think the second installation is the best way. Toshiba will surely bring a new Service Pack 2 tested Power Saver version.

  Good bye

• New computer with Windows 7, Service pack 1 and I cannot do Mozella Thunderbird works.

  Product: HP h8-1216

  Operating system: Windows 7, Service pack 1

  Program: Mozezza Thunderbird

  Error message: "could not initialize the safety component of the application.

  Hello

  Consult this publication of information.

• > SetupNew\setup.cpp (135) __PAPP:__PVENDOR:__PGUID:__@windows XP Service Pack 3 (2600) IE 8.0.60001.18702__

  I downloaded PC Studio for my Samsung and got this error.

  > SetupNew\setup.cpp (135)

  PAPP:

  PVENDOR:

  PGUID:

  @windows XP Service Pack 3 (2600) IE 8.0.60001.18702

  How can I solve this problem?

  Hi al1902,

  What operating system do you have Windows installed?

  This sounds like the download is corrupted. I suggest you uninstall the original download and get it again on the site.
  If it's a big file, possibly using a download manager could help.

  Download and install the download at this link Manager: http://store.microsoft.com/Help/Download-Manager

  Also I suggest you to optimize and reset Internet Explorer before reinstalling the PC Studio to your computer

  Follow the steps in the link given to optimize IE.
  http://support.Microsoft.com/kb/936213

  Click on 'Fixit' from this link and check: http://support.microsoft.com/kb/923737

  Aziz Nadeem - Microsoft Support

• Failure of the Installation Windows 7 Service Pack 1 x 64 error code 0 x 80073701

  Hello, I tried to install on Window 7 Home Premium x 64 SP1 several times today, and all end up with failed with the same error code. (error code 0 x 80073701 - the reference cannot be found). I tried troubleshooting windows update, updated system preparation tools, disable security software, and even installing in safe mode, and all end up insufficient. I use the Offline Installer (Windows6. 1 - KB976932 - X 64 .exe) because the help of windows update, the download will not start even (in a first time, it starts, then stuck at 22 percent, and then it shows the same error code).

  I hope you can help...

  Additional information:

  Firewall: Windows Firewall

  Antivirus: Microsoft Security Essential 2.0

  Additional security software: Malwarebytes Anti-Malware 1.50 with real-time protection (has been disabled, but even failure), Panda USB Vaccine (I think that this has nothing to do with this problem)

  The extra TSRs: SmartDefrag 1.5, Advanced SystemCare 3.7.3 Daemon Tools Lite

  Well after hours of time, I found a solution and posted a comment here:

  http://Marcin.Malkowski.EU/2011/03/02/Windows-7-Service-Pack-1-error_sxs_assembly_missing/

• WINDOWS VISTA SERVICE PACK 1 (KB936330) PROBLEMS? Help, please?

  Windows Vista Service Pack (KB936330) will not install? I tried several times, it will take about an hour to download, then just when I think she finally takes, it cancels everything back, and it takes another hour? He says it's important, but I can't do it, can anyone help? I would be grateful if someone could tell me what I need to do.
  Thanks in advance for your time
  Race...

  Hi racechasser,

  Thank you for using the answers.microsoft.com forum.

  .  .  Please download the service pack again. It may have been a corrupted download.p >

  You can ensure that a download manager is used for this process, so not yet of corruption that happens.   Search live.com or your search engine preferred download manager and select the one sure what you will find.

  Here is a link to the service pack.  https://www.Microsoft.com/downloads/details.aspx?FamilyId=B0C7136D-5EBB-413B-89C9-CB3D06D12674&displaylang=en

  Another way to look at this question is to get information of the event viewer on the failure that occurred.  To review event viewer / click on the ORB Start / computer right click / Select manage / select event viewer.

  Find the information in Event Viewer on the failure of the update installation and provide this information on the forum.  As well as if there is an error, you receive what it is and ID # is.

  Safety Note: always have on hand a good backup before you start any installs/updates/or diagnosis of troubleshooting.

  Let us know for more information if necessary.

  Thank you

  Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

• Side effects of installing windows xp service pack 3 upgrade on windows xp media center edition version 2002 service pack 2

  Will there be side effects to install windows xp service pack 3 update on my windows xp media center edition version 2002 service pack 2?

  Done correctly, installation of SP3 will have as a side effect, a very beneficial: Extended Support for WinXP (x 86) SP2 ends July 13, 2010. After this date, computers that run Windows XP SP2 will NOT be offered additional security updates critical (x 86), automatic updates do not work, and Windows Update Web site is not accessible until SP3 is installed.

  How TO get a computer running WinXP SP2 fully patched
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

• Windows 7 Service Pack 1

  Hello I use a Hp Pavalion 64 bit windows 7 computer. I restored my computer back to factory specifications and it seems that I no longer have the service pack installed on it. To confirm this, I have a right-click on computer in the menu start select properties and a top of the window where it is written. Windows Windows Home Premium Edition and the rest of the Windows copy right information. Services pack is is no longer there. I ask if this seems similar to anyone. Can someone also please show me where I can get the service pack and if some slim chance if service pack one is installed on my computer it can damage it if I download it again. Please any advide. Thank you.

  Hello

  Restore your machine back to factory settings will bring down your machine on day 1, at the opening of the box. You must apply all the updates/fixes for Windows. Depending on when you bought your machine, SP1 may not be ready at that time here. Yes, that's the standard. Please use the following instructions to update your computer to SP1.

  http://Windows.Microsoft.com/en-AU/Windows7/install-Windows-7-Service-Pack-1

  Kind regards.

• Error on Windows 2003 service pack 2 (ql40xx.sys)

  I get the pop following error when you attempt to apply windows 2003 service pack 2:

  Setup has detected a driver (ql40xx.sys) that is not compatible with Windows Server 2003 Service Pack 2. If please contact QLogic for an updated driver and restart the installation.
  It is a 2003 physics attached to the initiator iSCSI via MS iSCSI storage server
  I searched on several forums resolution and there is limited information everywhere associated with this error message
  Here's the whole svcpack.log journal entry
  3.063: 20/03/2013 03:56:46.133 (local)

  3.063: C:\WINDOWS\SoftwareDistribution\Download\f6beed31356960099b028c3b7e0f7fc3\update\update.exe (version 6.3.4.1)

  3.063: service Pack started with following command line: /ParentInfo:2e2d6a92fab565479ffd0c74fb0be2d5 /if

  3.063: in function GetBuildType, line 1170, RegQueryValueEx failed with error 0x2

  3.141: return the value of OnACPower = 1

  3.141: OnACPower returns the value (0 x 1) that is equal to 0 x 1

  3.141: condition succeeded to the OnACPower.Section section in row 1 prerequisites

  3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to halcmpx.dll

  3.625: condition succeeded to the CustomHalUnisysBlock.Section section in row 2 of prerequisites

  3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to Unisys CMP Server ACPI HAL

  3.625: first condition in CustomHalUniSysBlock.Section2 succeeded

  3.625: condition succeeded to the CustomHalUniSysBlock.Section2 section in line 3 of prerequisites

  3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to HALSRAAC. DLL

  3.625: condition succeeded to the CustomHalStratusBlock.Section section in line 4 prerequisites

  3.625: C:\WINDOWS\system32\HAL InternalFileName. DLL is not equal to halce52.dll

  3.625: condition succeeded to the CustomHalMarathonBlock.Section section in line 5 of prerequisites

  3.625: service SpUpdSvc not registered in SCM 0 x 424

  3.625: condition succeeded to the SpUpdSvcBlock.Section section in line 6 requirements

  3.625: start is present

  3.625: SYSTEM\CurrentControlSet\Services\MSDTC\Start is not equal to specified value

  3.625: second Condition in MSDTC. Not.Disabled succeeded

  3.625: condition succeeded MDSTC section. Check.Disabled on line 7 prerequisites

  3.625: C:\WINDOWS\system32\DRIVERS\elxsli2.sys is not present

  3.625: first condition in Emulex.Driver.Compat.Check.Section succeeded

  3.625: condition succeeded to the Emulex.Driver.Compat.Check.Section section in line 8 of prerequisites

  3.625: C:\WINDOWS\system32\DRIVERS\ql40xx.sys is present

  3,672: C:\WINDOWS\system32\DRIVERS\ql40xx.sys FileVersion is less 2.1.3.9

  3,672: Check condition for line 9 of prerequisite returned FALSE

  3.984: installation of Service Pack 2 has encountered an error: Setup has detected a driver (ql40xx.sys) that is not compatible with Windows Server 2003 Service Pack 2. If please contact QLogic for an updated driver and restart the installation.

  4,000: UnRegisterSpuninstForRecovery, failed to delete SpRecoverCmdLine, 0 error value x 2

  4,000: DoInstallation: has no cancellation of registration of spuninst.exe for recovery.

  4,281: Setup has detected a driver (ql40xx.sys) that is not compatible with Windows Server 2003 Service Pack 2. If please contact QLogic for an updated driver and restart the installation.

  4,281: Update.exe extended error code = 0xf0f4

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows 7 Service Pack 1 - what patches are in it?

  I installed Windows 7 Pro 64 bit. I heard that Windows 7 Service Pack 1 is about to begin its beta in July. Someone can still provide a preliminary list of which sets are in it?

  TIA.

  Ken Friedman

  It will be a minor update. Please note that a beta (test version) of Windows 7 Service Pack 1 will be released in July. It is not the last update.

  http://windowsteamblog.com/blogs/Windows7/archive/2010/03/18/talking-about-Service-Pack-1-for-Windows-7-and-Windows-Server-2008-R2.aspx

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I have to update my Microsoft Windows XP Service Pack 3 operating system.

  I have to update my Microsoft Windows XP Service Pack 3 operating system.

  However, in my services, I am unable to change my Automatic Updates service status to started.

  I get the error message - error 1058: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Hi, Bill.

  Follow the instructions here:

  Error 1058 "error message appears when a service stops unexpectedly

  http://support.Microsoft.com/kb/241584

• The Print Spooler Service is not running. Operating system is Windows XP Service Pack 3.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Robear:

  I'll be back of the travel.  I'm after the suggestion of CARI.  Seems to be the right track.

  My print spooler system component is missing from the remote procedure call.  If I restore it, I think that the print spooler is reactive.  Suggestions of curry hit Start, Program Files, accessories and they type net start spooler.  However, after the departure, I don't see any Program Files, so am unable to complete the suggested path.