Connection reset when HTTPS access through proxy

Similar Questions

• WRT610N resets when you access storage

  I try to add two external hard drives to my Linksys WRT610N.  The first is a Western Digital My Book 500 GB.  This drive works fine, can be mapped and accessible by all computers and drive domestic UPNP Blu Ray on my network.  It is formatted NTFS and still works fine.  on the storage-> record in the router configuration screen, it is labeled WD external 5000AAV.  I created the part and everything works fine.  Now, on the the problem drive.

  I tried to add a new WD My Book 1 TB.  It presents itself as WD external 10EACS in routers storage options.  Initially, this disc has been formatted FAT 32.  I had plugged, but it would become unavailable from networked computers all the time.  I surely 'delete drive' and formatted in NTFS to see if it would help as I did with the smaller drive, old people.  to reconnect the hard drive for the router, he always appeared in FAT32 so I safely removed the disc again.  This caused the router resets automatically.  When the router power back, the binked USB symbol repeatedly for what seemed like 5 minutes after that the internet service was restored.  During the period of flashing, I couldn't connect to the smaller drive properly in network.  Now the drive appears in my storage routers settings, but its name of the partition, NTFS and the button "Create sharing" are all absent.  When I try a "refresh" nothing changes.  When I try to 'Remove the drive safely', the router resets.  Passage of 'Disc' for "Media Server" and then back to 'Disc' options will cause the router to blame.  How can I get this 1 TB network drive and connected consistantly.  I'm sick of resetting everything and start all over with custom settings each time the hard drive of 1 TB is de-energized.

  Firm ware is the most recent version.  All IP addresses are static via a DHCP reservation.  Passwords have been customized and value.  Users are defined.  Two wireless networks have custom names, but the same password.  Before I converted the 1 TB drive to NTFS, I plugged on our laptop, ran a disk check, found many incomplete records that have been "resolved".  I analyzed and defragmented it too.

  I had many problems with this whole new router and I'm getting very frustrated with it.  Sometimes in the past, I had give up by transfers of files from our mobile network.  I can't use my HDD for storage networking upward because of this.  I was reseting everything many times.  The entire system (both network printer) worked fine with old wrt54G.  Everything was shared by a 10 year machine, running windows 2000!  We wanted to accelerate, so we spent $ 300 million this Christmas on the WRT610N and a WUSB600N.  The WRT610N never served the NAS correctly (for BLU - Ray).  When the WUSB600N was connected to our laptop, it would never allow 'see us' the network printer plugged into the router (internal wireless laptops will be 'G').  I have been in the forums and received very little assistance.  CAN SOMEONE HELP ME PLEASE?

  I called Linksys. After 1.5 hours on the phone, I finally got the answer I didn't want to hear.  The WRT610N does not support several hard drives.  You can only connect a hard drive at a time.

• ASA5505 - connection reset when you try to SSH IPSEC tunnel

  Hello

  VPN IPSEC just bought myself an ASA5505 to replace a PIX 501 and having been transferred to the bulk of the previous configuration, I managed to get the two tunnels to work as before.

  Unfortunately when I try and SSH for the SAA the right connection restores instantly even when the tunnel is up. It seems as if the ASA actively refuses the connection, if the journal does not specify this. I had always assumed that the traffic on an established IPSEC tunnel has been implicitly trust and not subject to the usual rules of access list.

  I can't SSH to the ASA in the 10.0.0.x range, but I can't SSH to a machine on 10.27.0.4 (I know the tunnel is up and working)

  Reference attached config (less sensitive information not relevant).

  Also - although I'm not sure of the relevance is given the tunnels seem to work - when I get the line "meepnet-map outside crypto map interface" in the reports of the ASA configuration mode "warning: the crypto map entry is incomplete!" even though I provided the access list, peers, and transform-set variables.

  Any help gratefully received! :)

  Thank you

  DAZ

  Hello Darren,

  Please mark as answer, if your querry is resolved. Enjoy your time!

  Kind regards

  Ankur Thukral

  Community Manager - security & VPN

• Launch of HFR reports in PDF format and in HTML when you access through planning Tasklist

  I am faced with a dilemma. I'm on a project where the planning is being installed. MS Excel SmartView is the main interface to the user for forms and reports. I posted several HFR reports for planning lists, but users want the option to open in PDF or HTML format. Reports HFR list of default tasks in html format. However, I understand that you can set the option via the workspace of planning to have financial reports in PDF format or html. The question is, how do I get a HFR report assigned in a task list to launch PDF unless the user set the preference in the workspace of planning. We have no change, so Management Department, the community using Smart View is a major obstacle so, another site it would do worse. Is there a global parameter that can be set at the level of the server, or behind the adjustment of scenes to the default code for all users in PDF format? The other issue is that if the user then wishes to obtain the PDF HFR report, can they have an option to open in mode query in MS Excel as an Ad hoc planning? Any suggestions on these two issues would be greatly appreciated. We are on the verge of the UAT and expected it comes down from the top. Thanks in advance.

  Hello

  In the world you can make changes in the Jconsole mbeans to open any report EN PDF default is htm (if you have version 11.1.2.1). To change the settings try below:

  To connect to the web server EN
  Run FRconfig.cmd in the Oracle\Middleware\EPMSystem11R1\products\financialreporting\bin folder.

  Above is open J console click mbeans (last tab)

  Expand .comhyperion click on change the attributes on the side left there is a single parameter called com.hyperion.reporting.HRPrefs.viewtype by default is html to PDF

  Close jconsole mbeans and restart web FR.

  For other parameters check you

  page 15 of http://docs.oracle.com/cd/E17236_01/epm.1112/fr_webadmin.pdf

• Site is not redirected to the mobile version when you access through phone

  I made a mobile version of my site www.derboden.com and uploaded on the ftp to my host. When I go there it always shows the desktop version not the mobile version. Help, please.

  The folder structure exported by Muse must be maintained. In general, this means using an FTP client or the built-in file? Upload to FTP host... Muse feature to copy all of the files and folders on your server.

• Since the installation of the latest version of 4.0b12, I am unable to connect to any https through a proxy site. Connection works if no proxy is involved, with the proxy, I get a message like "proxy refuses the connection". Thank you for your answer

  I am connected to the network of the client and I should use a proxy.
  I successfully authenticate to the proxy and I try to access https://mail.google.com.
  I get a message that the proxy refuses the connection.
  I noticed that this happens with all https sites.
  If I connect with my mobile internet stick without proxy, I am able to connect: the combination of proxy and https is a failure.
  Other computers on the same network with different browsers can connect to https via the proxy.

  I work with the development of Firefox on this team. As far as I know, they seem to think that there are 2 or 3 different with the same symptoms or very similar problems, all involving proxies. They think that they have set their all for RC1.

  Right now, it seems that we just want to test an early version.

  You can get that here:

  http://ftp.mozilla.org/pub/mozilla.or.../Firefox-4.0b13pre.en-US.Win32.installer.exe

  Install this somewhere (not in your current installation directory), quit all instances of Firefox and try it. I would like to know if it works.

• When you use a Proxy, FF4b12 unable to connect to websites over HTTPS

  Until including beta FF4b11 this behavior doesn't happen; using proxies was no problem at all. Since FF4b12 I can browse Web sites using HTTP, but is no longer using HTTPS. The proxy server uses the standard port 3128.

  A result of this. As far as I know, they seem to think that there are 2 or 3 different with the same symptoms or very similar problems, all involving proxies. They think that they have set their all for RC1.

  I passed along addresses but now, it seems that we just want to test an early version.

  You can get that here:

  http://ftp.mozilla.org/pub/mozilla.or.../Firefox-4.0b13pre.en-US.Win32.installer.exe

  Install this somewhere (not in your current installation directory), quit all instances of Firefox and try it. I would like to know if it works.

• I am a student in the United Kingdom, and my account Adobe said that my adobe creative cloud subscription has expired so I can't use the software. However when I access my account through "onthehub" he told me that the same subscription has not expired. P

  I am a student in the United Kingdom, and my account Adobe said that my adobe creative cloud subscription has expired so I can't use the software. However when I access my account through "onthehub" he told me that the same subscription has not expired. Help, please?

  Your subscription to cloud shows correctly on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I changed my password but cannot connect. When I reset the password they send an e-mail to my other email account, but there is no text tell me how to change

  I changed my password but cannot connect. When I reset the password they send an e-mail to my other email account, but there is no text tell me how to change it. He repeats to me just 'loading '.

  frustrating

  If you are referring to a Windows Live account, you can get help here: http://www.windowslivehelp.com

• All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.

  Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

  Laughing out loud

• SSLHandshakeException when connecting to an https site

  I'm SSLHandshakeException when connecting to an https site. The error message is

  javax.net.ssl.SSLHandshakeException: Received fatal alert: handshake_failure
  

  I turned on debugging to SSL recording, but I was not able to understand the root cause. It seems that the java client sends the ClientHello but does not receive the ServerHello message where the server chooses the most recent version of SSL and the best suite of encryption that both the client and the server support and sends this information to the customer. What is the cause? If so, how can I solve this?

  Newspapers are pasted here - Java SSLHandshakeException Logs - Pastebin.com

  Thank you!

  It seems that the question was because of java 8 client did not support the TLS_RSA_WITH_AES_256_CBC_SHA algorithm. Addition of the PVE pots has solved the problem.

  Answer detailed - java - SSLHandshakeException when connecting to an https site - Stack Overflow

• Fonts Typekit works not when you access the site through go daddy domain forwarding.

  Let me start by saying that I am a complete nube. I have a limited knowledge of the terminology and the way that the web works but I'm learning. I have CC, has created a site for a friend and used a typekit fonts. I downloaded the site to my hosting account as a "subdomain" of my website to test and everything seemed to work very well. Once I felt that everything was ready to launch, I went to my account of go daddy friends and did his estate on the site. The site loads very well and all the fonts appear ok except one typekit fonts that I used. When you access the site directly (as a subdomain on my site, example: www.mypersonalsite.com/myfriendssite) I see typekit fonts in all its glory, however when accessing the site of the field pointed no name, no typekit fonts. Very confused. I was under the impression that the two methods to access the site will take you to the same place and yet they net of different results. Any help would be appreciated.

  Hey Danny,

  Web of Typekit fonts are served only for the specified domains to publish on time. You need to specify explicitly field of your friend when the site is published.

  The website URL (s) on the ground in the Upload FTP host and export as HTML dialog boxes take in charge several entries separated by commas as in www.mypersonalsite.com, www,myfriendssite.com

  I hope this helps.

  Abhishek

• Access through my own security questions!

  I'm trying to re - put my security questions, but Apple won't let me until I answered to current security issues. I tried, but he repeated to me that my answers are incorrect. Therefore I can't go forward. Can someone please help/advise? Access through my own security questions?

  If you get the reset link to your account on http://appleid.apple.com , then you don't have an emergency verified account e-mail address (an additional/alternate e-mail address is different), you will need to contact support in the country where you are (and therefore the country on your account) to get the reset questions: Contact Apple for the Apple ID account security support

  If your country is not on this page, then try this form to contact Support: https://www.apple.com/emea/support/itunes/contact.html

  When they have been reset you can then add a backup for possible future use email address: on your Apple ID - Apple Support email addresses

  Or if it is available in your country, you can substitute 2-step verification: frequently asked questions about two-step for Apple ID verification

• Lost my internet connection, even when wired

  My laptop was working fine then one day just stopped connecting to the internet.  I have a computer dell laptop (Inspiron 1525) with vista.  I ran each test there is.  He says that I have "local".  I try cable and wireless tried to obtain a new ip address and just could not get my maptop online.  It has been more than two months without it and I go to school online.  I have 3 trays of Home Office and two of them are wireless and they work very well.  We tried my friend's laptop and told him the same thing: Wireless Network Connection Status, IPv4 & IPv6 connectivity is local.  I have a linksys router and use cox for my home internet provider.  All my other computers work and their wireless cards.  My laptop is new and I don't know anything.  Please help me get online?  any suggestions?  Dell wants $59.00 for help and I've been unemployed for months.

  Hello

  Are your other computers, Vista? Router is configured for WPA/WPA2 security? It broadcasts the
  SSID (name)?

  Try these:

  Eliminate corruption in case he has a role:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------

  Control Panel - Device Manager - network - Wifi - write down of the brand and the model - double click on write - tab - pilot
  version - click the driver update (this likely will do nothing that MS is far behind the pilots of certification).

  Do the same for the network (NIC) card

  Then right-click on each one and UNINSTALL - this will rebuild the driver stack - RESTART
  -----------------------------------------------------------
  Later, when I hope that you are online.
  l
  (If you get online, then you want to use this information to get the new drivers Wifi and NETWORK card and you can do it.)

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  Then - close all regular programs

  Start command - in the search box type-

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------------------------------

  Do this if up and running or not. Make sure you know the user name and password to the network.

  This will initiate you if you have any access - that and restart after the two.

  Control Panel - Network & Sharing Center - right click on Customize - set location Page - merge or delete
  networks - REMOVE ALL networks except those you are 100% sure aren't your network - so there is no doubt
  Delete it and really best to erase EVERYTHING. (if you delete one that you can relogon on when you access next time).

  Network & Sharing Center - on the left handle wireless networks - if all there right click Delete network
  Network & Sharing Center - on the left handle network connections - it should show nothing connected.

  Reboot - use start-up connect - connect to the network - when asked if you set it in private.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• IPv4 and IPv6 connectivity says no Internet access

  My computer says that it has access to the internet but when I use a browser it does not work. Also Ipv4 and Ipv6 connectivity says no internet access, and at the launch of the troubleshooting, it indicates that the DNS server is not responding. So there are a lot of problems.

  Hello

  Internet works with IPv4.

  I can't give a targeted response as you have not provided technical information on how you connect to the Internet and devices that are involveved.

  In general.

  Check the Device Manager for the entry of valid card of the wire.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).

  Turn off the computer and the router, reset the router and the computer.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  It still does not work, try this too.

  Firewall software.

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall Windows Firewall should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly, or uninstall it completely allowing the clean flow of traffic on the local network. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Reset the network stacks .

  Type Cmd in the search text box.

  Press Ctrl-Shift-Enter keyboard shortcut to run a command as administrator prompt.  Allow the elevation.

  Type netsh winsock reset at the command prompt and press the Enter key.

  Do the same process to refresh the TCP/IP, just replace the command typed with.

  netsh int ip reset

  Restart the computer.

  Jack, MVP-Networking. WWW.EZLAN.NET