advice/assistance on the consolidation of data from multiple Macs

Similar Questions

• Use two assistants for the acquisition of data at the same time

  Hello

  I want to read multiple data channels of analog inputs on my DAQ hardware. However, when I try to create two separate data acquisition assistants for each entry, it gives an error saying "is reserved for the specified resource. The operation could not be performed as indicated "." Can't use two assistants for the acquisition of data at the same time?

  I have to add different channels in the same assistant DAQ? I tried, but I couldn't separate the data in different graphs.

  How does this work?

  Kind regards

  Allard

  You can't have multiple tasks of the same type (in this case inputs analog) on the same device.  Just so having 1 DAQ Assistant read all your channels and separate your channels for individual transformation.

• Endangered on the consolidation of data

  I use HFM v9.3.1
  I created a new forecast scenario - load periodic (similar to the other forecast scenarios) already in the metadata
  I have load data into this scenario in an entity very well but when I start the consolidation of data disappear to zero
  I checked the new accounts are used and they are all set up as ASSET
  I loaded security, exchange rates, started the process control
  Don't know why this is happening as for other configurations of scenario did not happen.
  Please tell us if you can.

  Please make sure that you use the POV as well as you load.

  For example: If you load data into a specific POV, make sure that you view the data in the same POV. Then it will exist.

• the analysis of data from a legacy in the form of bytes bluetooth

  Hi, Iam execution of java for MYGlucoHealth code monitor. I have to catch the bluetooth through my application data and analyze format. (later I store in the SQLite database). But according to the specification of the Protocol had, I do not understand how to read and analyze. I know how to pair the device to my request. But I do not know how to parse the bytes of data according to the Protocol of the device specification.
  
  Can someone tell me how to do this. All done with this kind of coding?
  
  Thnaks in advance,
  
  -Cissokho
  
  Published by: 798686 on November 2, 2010 02:38

  798686 wrote:
  Ok.. Thank you

  Tips for the facilitator: don't double post. I've locked the new thread.
  the analysis of data from a legacy in the form of bytes bluetooth
  Please continue here.

  DB

• How to transfer data from a mac mini in 2006 for a new?

  How to transfer data from a mac mini in 2006 for a new?

  The following can help:

  Move your content to a new Mac - Apple Support

  OS X: manually the Data Migration from another Mac - Apple Support

• L50-A-19N satellite can not read audio data from multiple sources

  I can't read the audio data from multiple sources. It is very annoying when I have 2 youtube videos, playing, if I start playing something on the media player, there is no sound on media player, it's the same when I have 2 open media players and 1 youtube video playing, youtube video has no sound...
  It disappears when I plug my headphones...

  I already have all the latest drivers, the DTS driver was last updated was in 2014, his day of February of this year...

  
  
  
  
  
  

  25/02/14

  His Studio in DTS

  DTS Inc.

  Windows 8.1 - 64 Bit

  1.01.2700

  I don't know if this has the feel, but I had his most recent DTS driver that I found, it is not my laptop model, but they all seem to be the same - v1.1.88.0
  I uninstalled the DTS software and still had the same problem, then it is irrelevant on its driver somehow...

  
  
  
  
  
  

  02/10/15

  Audio driver

  Integrated Device Technology Inc.

  Windows 8.1 - 64 Bit

  6.10.6491.0

  Audio driver IDT has more recent release date, but the version of the driver is the same as the 2013 one...
  Why the older drivers of toshiba releaseing as 'NEW '?
  

  2nd is my Advanced settings speakers, nothing has changed when I disabled "allow applications to take exclusive control of this device.
  

  Sorry but I don't understand your problem.
  I tested it on my machine and if I start the music on three different sources (YouTube, player, web radio) I can hear all together, but it makes no sense to listen to music from different sources.

  Or how do understand you?

• map a java object to data from multiple data sources

  We have the requirement that the attributes in a domain class can come from data from multiple data sources. Is TopLink supports this type of mapping? Is it possible to do this mapping in the workbench?
  
  Thank you very much!
  
  Ming-Wen

  TopLink supports a feature of SessionBroker. This allows classes in the same session to come from different sources of data and for the relations between the classes of data sources. It does not allow a single instance of direct data from multiple data sources, but the Forum could have a link with its data in the other data source.

  ----
  James: http://www.eclipselink.org

• Aggregation of data from multiple sources with BSE

  Hello
  
  I want to aggregate data from multiple data sources with a BSE service and after this call a bpel with a process of construction of these data.
  1 read data from the data source (dbadapter-select-call)
  2. read data from the data source B (dbadapter-select-call)
  3 assemble the data in xsl-equiped
  4. call bpel
  
  Is this possible? How can I get data from the first call and the second call to conversion data? If I receive data from the second call, the first call data seem to be lost.
  
  Any ideas?
  Gregor

  Gregor,

  It seems that this aggregation of data is not possible in the BSE. This can be done in BPEL too using only assigned but not using transformations. I tried to use transformations by giving the third argument to the function ora: processXSLT. But couldnot get the desired result.

  For more information on the passage of a second variable (of another schema) as a parameter to xslt pls refer to the post office

  http://blogs.Oracle.com/rammenon/2007/05/

  and the bug fix 'passage BPEL Variable content in XSLT as parameters'.

  Hope this helps you.

  Thank you, Vincent.

• Maintaining the integrity of the data so that the migration of data from different environment

  Hello

  In Oracle 11r2,.

  We work in an environment were we have need to migrate data from one environment to the other.

  The data is stored in 5 tables that has data integrity constraints (foreign keys).

  They use keys of substitution for the primary key.

  These keys are populated by sequences.

  Export is not a problem.

  Importing is.

  The challenge is that surrogate keys (sequence numbers) may have already been used in the new environment.

  Thus, we would need assign new surrogate keys of the sequence for the imported data without compromising the integrity of the data in the parent-child relationships.

  We need the integrity of the data in this process.

  We need the process to be fast.

  We are looking for advice if data pump might solve our problem or if a script internal or a mixture of both is required.

  Perhaps other tools exist to achieve this goal.

  Any ideas or suggestions would be greatly appreciated.

  Thank you

  Yan Pachebat

  It would be instead of data pump.  11g Release 2 added the function REMAP_DATA, which will allow you to incorporate something like this into a data pump process.  It was not available at the time I did my scripts 11.1.

  http://download.Oracle.com/otndocs/products/database/enterprise_edition/utilities/PDF/datapump11g2_transform_1009.PDF

• Write the data from multiple devices in columns

  Hi, I have a problem in writing the data of 2 devices I have currently (for pressure and temperature). I wanted to be written in 2 coloums, one for temperature and pressure for each produced data. What I have now is that the data written in the rows. Please help me on this.

  Also, I put the timestamp, but only time as hh/mm/ss data. would it be possible to produce both as in the graph, which is written as hh/mm/Scott (in microseconds)

  I have attached my labview program, and also the current save file I receive, and format also required that I really want.

  Thank you

  Hello

  1 use a function table 2D transposes, before you write the table of function "spreadsheet table.

  2. use the format of the exact time in the string of Format date/time function. Use the assistance provided for this function to get the date and time format you need

  3. the wiring is not good. Your 'open file' function is placed somewhere after writing in the file structure. follow the flow of data.

  Tips: you can consize your block diagram and place your functions and blocks in order, wire the neater.

• How to implement the reading of data from a matte file on a cRIO?

  Hi all!

  I'm still not sure, it is plausible, but I'll ask rather before you begin complicating. So far, I found no useful information on reading in the data to a device of RT from a file (type of a simulation test - data is simulated).

  I have the MatLab plugin that allows the storage of data read a MAT file, which has a number of columns that represent the different signals and lines representing the samples at a time (depending on the time of the sample - sample every time has its own line of signal data).

  I have no idea how to implement this at cRIO.

  The idea is:

  I have some algorithms running on the controller of RIO in a timed loop. As the entries of these algorithms I need to access each of the values of columns in the row, which is the time of the sample (sort of a time series - without written actual times).

  I am fairly new to RT and LV development, so any help would be appreciated.

  Thank you

  Luka

  Dear Luka!

  I think the reading of all the samples in a single channel is exactly what you need here, because reading the files may take some time and is not deterministic, so it is best to read all the data in memory (or if this is not feasible due to problems of size, fairly large pieces may be sufficient). The table read can be provided and then in the loop simulating outings, something like this:

  

  I used here separate channels so it's more graphic, but you can build all the channels in a 2D array and array index corresponding to the samples fom 1 who. You can also use for loops with indexing as tunnels are setup and then you won't need the index functions and the number of iterations is also set automatically, but you have to take care of synchronization settings.

  Best regards:

  Andrew Valko

  National Instruments

• Speed up the transfer of data from Excel

  Hey!

  In my VI, I need the contents of 3 Excel files. The VI then takes in the filter criteria and uses them to filter all the data and produce graphs. Problem is that all 3 Excel files are more than 8000 lines deep and wide of 40 columns. She takes super long to get the data from one of these worksheets, nevermind 3.

  IM only starting this project, so I wanted to find the best way to address the issue.

  Is it possible to quickly transfer all the data from Excel to LabVIEW?

  If I read once and then writes it to a binary file for quick access, which would be better?

  I'm under that LabVIEW 2009 on Windows XP with report generation tool installed too.

  Rkll!

  Then this is the case you have seen either

  This

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/2231

  or

  This

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/3409

  ?

• Windows 7 hangs during the transfer of data from one drive to another

  This problem was pestering me for a long time, well over a year.

  When I transfer data from one disk to the other (generally large amounts), the computer crashes and I get a blue screen or it just restarts.

  Initially, I thought it was a faulty hard drive, so I replaced that, but the problem persisted. I ran diagnostics of smart drive on all my drives and no problems have been picked up.

  Then I replaced my RAM assuming there that all. The problem continues.

  Then I replaced the video card. The same problem.

  I then upgraded to windows 10 and the problem became more acute, so I rolled back to windows 7.

  The SSD has the latest firmware, the latest graphics card drivers.

  I think now it is one of the following two issues:

  Either my SSD drive that contains the operating system or motherboard?

  Someone at - it ideas of how to diagnose precisely this problem or how to solve it? Would contribute to a new facility?

  PC: Windows 7 SP1, AMD Phenom II X 4 965, Kingston 16 GB 1866 MHz DDR3 Non - ECC CL9 DIMM (Kit of 4) XMP beast series - HX318C9T3K4/16, AMD Radeon (TM) R9 series 200, Asus M4A87TD/USB3 motherboard

  Pilot, verified and associated usbfilter.sys from Advanced Micro Devices Inc. USB filter driver.

  Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  Also and important you need to update this driver since 2005.  It is a known problem in win 7 (ASACPI.sys)

  Pre 2009 this driver version is a known cause of BSOD.
  
  Please visit Asus tek computer Inc. - support - drivers and download p7p55d the
  http://support.ASUS.com/download.aspx?SLanguage=en&m=P7P55D%20Le&p=1&s=32&OS=29&hashedid=e7zic83pvqsr80lm

  Scroll to the utility category, then scroll down to the "atk0110 driver for Windows XP/vista/windows 7 32 & 64-bit" (it is about 12 down).
  Download and install it.

  Go to c:\windows\system32\drivers to check and make sure that the file asacpi.sys is stamped 2009 or 2010 (not before).  If you are using Win 8 there are at least a 2012 version that is needed for this.  If you can't find it on the site of ASUS you can download using windows update.  Read about it here

• Backup utility Windows 7 application ' are you sure you want to remove the most recent data from the backup file "even if I'm trying to remove the backup set is not the most recent.

  I'm trying to reduce the amount of space that my Windows 7 backup uses so I've come to the place in Windows 7 backup:
  Manage space > view backups...

  I am then presented a list of three backup sets:
  01/03/2012 to 01/04/2012
  12/07/2011 to 12/21/2011
  23/11/2011 to 30/11/2011

  I would like to remove the older two, leaving the most recent. However, this doesn't seem to work as expected. If I try to delete one of the two most recent ones (the first two in the list above) I get the following warning "Are you sure you want to delete this backup file.

  However, if I try to delete the last one in the list, I get a slightly different error "Are you sure you want to remove the most recent data of the file backup?"-sounds strange because it is clearly not the most recent backup according to the dates it's show.

  Of course, I can go ahead and ignore the warnings, but I fear that maybe there are some files in the last backup the value in the list that may not be right more recent set backs.

  In 2011, I thought this might be something wrong with the date formats vs US UK (I am in England so the above dates are in dd/mm/yyyy format and not in jj/mm/aaaa) - but now it's 2012 and I backup from 2012 and 2011 games and he always seems to think that the oldest backup of 2011 is the most recent.

  Any ideas? Can I delete the oldest backup sets (that is, the two that are from 2011) safely?

  Any help much appreciated - thank you.

  Simon

  Update: I checked on other PCs in the office and the situation is the same - is not only something strange on a PC.

• Can we use Source accounting entity group to load the data from multiple entities with a single rule to load?

  
  Page 79 of erpi_admin_11123200.pdf says that "reporting entity groups are used to extract data from several reporting entities in a single data rule execution.  I use standard EBS adapter to load data in HFM application, I created a group of entity made up of several accounting entities, but I can't find a place in FDMEE where you get to select/use this group... When you define an import format you type the name and select Source (e, g. EBS) system you can select Map Source (for example EBS11 I adapter) or the accounting entity (it is what I select to define data load maps), but not both.  Note that there is no place to select the Group of accounting entity...  Location check menu group entity drop-down but it doe not my group of accounting entity which I believe is anyway something different... and creating a location and pointing to a format compatible with the selected Source adapter is no not good either... I'm confused, so is it possible to load data from several reporting entities in one rule to load or am I misreading the documentation?  Thank you in advance.

  Do not leave the field blank in the Import Format. If leave you empty to the place, when you set the rule to load data (for the location with EBS as a Source system), you will be able to select a single accounting entity or a group of accounting entity.

  You can see here

  Please mark this as useful or answer question so that others can see.

  Thank you