advice of sequences fps 25 and 29.97 FPS

Similar Questions

• Any sequence of copy and subsequence.

  In my main sequence, there is a sequence in a Select Case structure that has a stage, a call to a sequence that has several subsequences. I want to copy the whole set of subsequences and subsubsequences. By copying the case, step and end and then sticky am I copy the whole or just the topping of cheese enchilada? Perhaps there is a standard language to achieve this.

  Thank you

  JVH

  If you make a copy of a file of sequence, you copy what is in the file in the sequence. If you are in a sequence of main and copied a sous-suite, then the only copy made is of the subsequence. Of course, all calls to additional subsequences would not change.

  If the two are almost identical, why don't you just use one and have different parameters that you pass?

• I'm on the 4.1.1.00.23 Apex vesion. I've created a classic report and I am trying to sort. Here's how I'm trying to sort by column name. I have TotPGPV with sorting sequence 1 desc and NewTOTPGPV with sorting sequence 2 desc. I have Count1, Count5 with t

  I'm on version 4.1.1.00.23 of the APEX. I've created a classic report and I am trying to sort. Here's how I'm trying to sort by column name. I have TotPGPV with sorting sequence 1 desc and NewTOTPGPV with sorting sequence 2 desc. I have Count1, Count5 with the sort column. What I'm asking is when the report is run can column sorting to default Count1 and Count5 descending instead of the ascendant. I don't see anywhere to set the default value for the sort column.

  Hi - on the report of the page attributes - that you show in your attached screenshot - you can select the columns to sort on the sort sequence as well as the direction of the sort, i.e. for a given column, you can choose to allow sorting on this column, what position this column must be in the sort sequence and whether to sort Ascending or descending by default (i.e. '1' means sort this column first and bottom-up and "1 desc") sort this column first and downhill). Don't forget that once you click on one of the headings of column during execution, it changes your sort settings and these settings are stored in your preferences, that is, they are used again the next time you log in your application and rerun the report.

  Kind regards
  Marc

• Help create browse sequences that work and remove sync TOC

  Hello

  I use the latest version of the TCS with RH 9.0. I'm trying to create a release of WebHelp Pro

  for a book produced initially in Framemaker. I followed Rick skinny on skins

  Guide to customize the appearance, but real problems to make my sequence to browse

  to work. I used the tools > Browse, and then create automatically using Frame TOC, sequence editor

  Select the table of contents of the drop-down list and 4 chosen as being the depth I want to browse.

  The table of contents that appears in the browse sequences is strange and does not represent the table of contents of the frame that

  appears in the html code, I left that ' such what. " Once I've produced the navigation sequence output works

  the equivalent of the top level only. What am I am I doing wrong and what I should

  be change to make it fully functional?

  I also want to remove the table of contents of the synchronization of the toolbar, and it seems possible to

  remove the image but not the entire field. I know that this can be done, because of Peter Grainge

  HR site didn't. I will reach between stone and Rick somehow this website for

  my business...

  Thank you very much in advance for any ideas and help.

  Best wishes

  Karen

  Murder off the coast of the research is done through the presentation of the SSL Navigation pane - this is where you select which items you want to show (and in what order).

• Can I need separate videos to allow a user to 'Play All' (from the beginning to the end) and select certain sequences (ceremony, reception which the sequence chosen start and end at the rest of the video and not the sequence, speech etc.)?

  Hi - I'm obviously new to yet, but that's what I want to do.

  In a wedding video, I want them to be able to:

  1 play the movie from start to finish.

  2. Select a sequence (say speech) who plays since the beginning of the sequence to the END of the whole video.

  So do I need 1 video for the room, as well as 4 sequences - reception, cake, speech, dance?

  Colin

  You can use separate videos or a single video. The only video is easier for your desired navigation. You will find more people asking how to get the 'chapter' or the video scene at the rear to a menu when it ends and also have a game all. So ignore the advice on those.

  Simple video:

  Your single video goes on a timeline. 'Play all' is a button in the timeline, and the timeline has an end action of "last menu."

  Menu of chapter has 4 buttons (plus a fifth to return to the main menu), going to each respective chapter marker. There is no action to end on chapter markers, so when a new chapter is reached, he continues to play as the piece all the.

  Several videos:

  Each video goes on his own script. The end of video action a timeline is timeline two video etc. Play all is a button that goes to the timeline one. The chapter menu also has a button go to chapter one, and it works identical to the play all. Each of the chapter buttons go to their respective chapter deadlines.

  Still may have some problems with a certain time lag, but I do not think that they affect either of these workflows. Don't rely on the preview again; burn a test disc and play on a DVD player.

• Can someone give advice on apparently loose confidentiality and security settings in Safari on Mac

  I'm new to Mac and see that the security and privacy etc.settings for Safari seem to be very loose. (I have I have these much tighter settings on my Windows 7 PC) I am concerned about privacyand on web security, but I don't want any more to hinder the default mac system? So I would appreciate any advice on this subject. Thank you!

  Post edited by: bobhom

  There are a few easy steps you can take to improve your privacy on the Web.

  In the Safari menu bar, select

  ▹ Safari preferences... ▹ Extensions

  An inventory of the extensions you have installed, as appropriate. A few Safari extensions are adware or spyware. Carefully read the privacy policies or the terms of use. Delete everything that you don't really need, or you are not sure.

  An extension that you may want to install is called "Ghostery." It blocks tracking cookies a lot. Extensions "ClickToFlash" and "ClickToPlugin" prevents Flash content from loading automatically.

  If you have installed hacks supported by advertising as "Glims" affecting the Safari, uninstall them as instructed by the developer. Doing so will improve the stability of Safari, as well as your privacy.

  In the Safari Preferences dialog box, select the Privacy tab. You have the option to delete data, such as cookies, stored on your computer by web servers. You can delete all of these data, or only some of them remove by clicking on the Details button. The other parameters are little explicit.

  On a more advanced level, you can change the DNS servers used by your computer or router, to find the addresses of all the Internet servers that you use. In general, the best choice from the point of view of privacy is to use the DNS servers of your ISP. Your Internet traffic goes through the network of your Internet service provider anyway, so in theory, there is no loss of privacy in the use of its DNS servers. Avoid third party DNS services such as "OpenDNS", which is in the business of selling your information to marketing specialists.

  Consider using software like 'GlimmerBlocker' ad-blocking, which also blocks certain forms of abuse of JavaScript that can be used to track you. It is only suitable for advanced users, and it can block some web content you want to see.

  This comment is not an endorsement of any third party software. Do your own research before deciding whether to use the software.

  When you use a public network such as a Wi - Fi hotspot, don't forget that others connected to the same network may be able to listen to your network traffic. They will not be able to read the content of this traffic, if you connect to Web sites secured like this, but they know the addresses of the sites. It is the same for the e-mail and Messaging. Public VPN services to sell as a solution to this problem, but using these services may have a serious security and privacy implications.

• Need advice on the bluetooth driver and software download

  * Please HELP *: you have just bought a bluemicro Nexus pro bluetooth v2.1 dongle. and Ive has damaged the disc it came with when I was opening the package.

  The disc says: Toshiba bluetooth driver and software bluetooth BT1.2/2/0/2.1.
  Anyone know if there is a download for this online somewhere or I have to go out and buy another? I'm not clued up when it comes to computers and would be very grateful for any help and advice... I; m using windows vista so that it should be compatible.

  Download and support Toshiba page you can download BT Toshiba stack but it's for use with Toshiba laptops.
  You bought non-Toshiba product then download contact Nexus or visit the support page of Nexus.

• Sequence multiple source and track V1 camera

  Hi, I have a camera sequence multiple source, but it does not seem to operate when way V1.

  So exchanged to any other track (for example V2) I can't switch the cameras:

  

  Is this correct, or is it a bug?

  Thank you

  According to me, the targeting of track chooses the lowest number of the selected track. Deselect your target track V1 and your multicamera will be operated in the V2.

  Click the blue color V1 to disable V1 track addressing

• generation of sequence using rownum and order of

  Hi all

  Need to generate a sequence number based on a column value in a table.

  When you try to insert into a table by using the order by and rownum, I am not able to do the same thing.

  Here is a simple example to show this... need help how to insert a sequence field in the base table a column value...

  create table test1(col1 number);
  
  
  insert into test1 values(1);
  insert into test1 values(2);
  
  
  
  
  insert into test1 values(4);
  insert into test1 values(3);
  

  select * from test1;
  

  1

  2

  4

  3

  Now, I'm trying to insert into test1 values-based test2:

  create table test2(col1 number,seq number);
  
  
  insert into test2 (select col1,rownum from test1  order by col1 asc);
  

  ORA-00907: lack of right parenthesis

  So I tried with:

  insert into test2 select col1,rownum from test1  order by col1 asc;
  

  It worked, but the sequence is not generated according to the ranking...

  COL1

  SEQ

  1	1
  2	2
  3	4
  4	3

  can someone please help...

  Thanks in advance...

  MRK...

  Another way would be to use analytical functions. These have the advantange of being independent of the order of... in fact, you could use serveral where everyone has his own sort.

  Select col1

  row_number() over (order by col1 CSA) seq_asc

  row_number() over (order by col1 desc) seq_desc

  of test1

• Sequence of character and Date

  Hello
  
  Oracle 11.2.0.1
  Windows
  
  Is there any way by which I can get next character and date as it takes the sequence number please? Suppose that in my table below is data:
  AA
  AB
  CA
  AD
  ..
  ..
  AX
  AY
  AZ
  BA
  BB
  BRITISH COLUMBIA
  ...
  BX
  BY
  BZ
  
  and I would like to get this type of sequence of object / function. Similar work if possible, date also please.
  
  Thank you.

  You are looking for something like this?

  create table test (col1 varchar2(2),col2 date,id number);
  
  CREATE OR REPLACE TRIGGER testtrig
  BEFORE INSERT ON test
  FOR EACH ROW
  DECLARE
  BEGIN
  select max(trunc(nvl(col2,sysdate)))+1
  into :new.col2 from test;
  select x1.seq
  into :new.col1
  from
  (
  with
    letters
    as
    (select chr( ascii('A')+level-1 ) letter
       from dual
    connect by level <= 26
    )
  select l1.letter || l2.letter as seq,rownum as rr
      from letters l1, letters l2
  ) x1
  where x1.rr=(select count(*) from test)+1;
  end;
  /
  
  SQL> insert into test(id) values (1);
  
  1 row created.
  
  SQL> insert into test(id) values (2);
  
  1 row created.
  
  SQL> insert into test(id) values (4);
  
  1 row created.
  
  SQL> insert into test(id) values (5);
  
  1 row created.
  
  SQL> select * from test;
  
  CO COL2              ID
  -- --------- ----------
  AA                    1
  AB 07-JUN-13          2
  AC 08-JUN-13          4
  AD 09-JUN-13          5
  
  SQL>
  

  Idea received from http://asktom.oracle.com/pls/apex/f?p=100:11:0:P11_QUESTION_ID:4136198000346693074

  Example, above work for 676 lines, because I gave the length of col1 like 2. If you want to develop in more lines, then follow the link that I write here.

  If you want to start your date column from a specific date, then in the code above to triger:
  Select max (trunc (nvl (col2, sysdate))) + 1
  You can give your date for sysdate instead

  and you did.

  If the above doesn't work, or you're looking for something different, then let us know.

  Concerning
  Girish Sharma

• Sequence of pixelation and video output

  Hello

  I have a project where I have original video pan within a smaller area of the sequence, a kind of Ken Burns effect.

  My overview of the sequence happens very pixelated and this, any export of this video file.

  I tried to export to MOV, AVI, FLV, MP4 and other formats, with different codecs, quality settings, binary and other - flow does not.

  I also tried to make sequence with different codecs prior to export, the effects of pan and make a WMP - it comes out exactly the same.

  Here's how it looks compared to the original video, if you look at the top line of the arms of the girl, you'll see what I mean:

  i.imgur.com/6IkGLez.jpg

  This is how the export looks like for Quicktime:

  i.imgur.com/r53Pblm.jpg

  I will appreciate if someone tells me why this is happening and how to remove the pixelation.

  Thank you!

  Ah ok.

  Yes, create a new sequence with fields to which Progressive instead of low.

  Copy and paste all of the old order in the new.

  And sure, when rendering, you use no. fields / Progressive on your exports too (in your screen shot you have down)

• Sequence video Previews and GPU settings?

  Dear PrP CC users,

  I wanted to get a few related that information to the sequence settings.

  In the bottom of the sequence settings box: video Previews. There are three boxes of UN / tick:

  Maximum depth

  Maximum render quality

  Linear color composite (requires a GPU acceleration or rendering quality max)

  Normally, I check all of them. I have an active Windforce GTX 770 4 GB CUDA mercury engine. I also updated rendering optimizes for: Performance.

  My questions are these.

  -These selections make the final output of a delivery schedule, or is it just for during regular and rendered reading preview?

  -Also when I export using Media Encoder through dynamic, is links - this misuse previews for a faster export, often I export to ProRes4444 for classification, I heard the preview files will differ as its created by the GPU and may slightly change color depending on the GPU, you have, so it is better to export and to allow him to perform a new made using the CPU in Media Encoder (I have always set the maximum depth and quality)?

  -Finally, in the export process, when I select the maximum Bit depth, there are options in the value of depth of bits (32, 48, 64) does it become redundant since I checked the maximum depth?

  Thank you.

  The first two boxes only affect previews.  The boxes of same in the export settings dialog box will be replace those and determine the output.

  Using previews for export is generally not a good idea, that doing so will incur an additional compression stage.  The exception occurs when the previews are lossless (or almost, as with DNxHD).

  Not working not with ProRes, I've never seen these options.

• Sequence of rendering and Clip title information on encoded sequences.

  Is it possible in first, After Effects or Media Encoder to render the title of the name of sequence information and the name of the clip on the encoded videos? First, I would like to do this on Dallies to make it easier to examine, with out having to deal with long slate-ins and which do not.

  Better to ask questions of specific product in the forum products

  http://forums.Adobe.com/community/premiere/premierepro_current?view=discussions

  http://forums.Adobe.com/community/aftereffects_general_discussion?view=discussions

• EBS - seeking advice re patches battery tech and also forms for 12.1.3

  Hi all
  
  I've updated a 11.5.10.2 to 12.1.3, ebs system currently HAVE the following versions of Oracle and forms are installed...
  
  The forms are :-10.1.2.3.0 ($ORACLE_HOME/config/ias.properties [InstallData] Version 10.1.2.3.0 =)
  and java-jar oc4j.jar - version returns-> Oracle Application Server containers for J2EE 10 g (10.1.2.3.0)
  (build 080228.2305.2133)
  
  the context file ias_version is :-10.1.3.4.0
  
  I installed 12.1.1 battery tech and fixes applied including the 12.1.3 file upgrade driver. I'm not tech battery upgrade just the key process according to the 121upgrade.pdf and 12.1.3 readme.
  
  I just want to check that I have not missed anything whatsoever for 12.1.3?
  
  Is the version of forms OK?
  
  Should spend 10.1.3.4.0, 10.1.3.5 to ias_version, I think that this is the last as we speak.
  
  
  Welcome to all the advice about what do better here for this to be as current as possible, we will make upgrading Production in September.
  
  OK, looking forward to hear from you.
  
  
  Cheers, Rob

  Please see the docs for the last group of hotfixes in 10.1.2 and 10.1.3 ORACLE_HOMEs.

  Upgrading Forms 10 g OracleAS and reports in Oracle E-Business Suite Release 12 [437878.1 ID]
  Upgrade to the latest Patch of 10.1.3.x 10g OracleAS located in Oracle E-Business Suite Release 12 [454811.1 ID]

  Thank you
  Hussein

• Sequence with copy and paste data

  My effect plugin implements the sequence data to save and retrieve a string like the PathMaster example. Indeed, the code is pretty much cut and paste from this example. Everything works fine for the backup and the opening of a file, but when by copying and pasting the effect, it seems I'm getting data corrupted for the flattened sequence data. I see that AE deploys the following calls in the order:

  PF_Cmd_SEQUENCE_FLATTEN

  PF_Cmd_SEQUENCE_RESETUP

  PF_Cmd_SEQUENCE_RESETUP

  PF_Cmd_SEQUENCE_RESETUP

  It's on the third PF_Cmd_SEQUENCE_RESETUP that the sequence_data is not correct. I've seen similar to this issue positions, but it was never answered.

  Any help would be appreciated.

  I realized that it was. My data structure was not correctly sorted. The sequence data must be structure so that your unflatten/flattened flag arrived until all data needed as pointers for flattening when RECONFIGURE them gets called he can ride correctly and can detect if the sequence data is flat or not. Previously, my data structure was as follows:

  typedef struct {}

  Prefix A_char [255];

  Flat A_Boolean;

  } Flat_Seq_Data;

  typedef struct {}

  A_char * prefix;

  Flat A_Boolean;

  } Unflat_Seq_Data;

  And it should be like this:

  typedef struct {}

  Flat A_Boolean;

  Prefix A_char [255];

  } Flat_Seq_Data;

  typedef struct {}

  Flat A_Boolean;

  A_char * prefix;

  } Unflat_Seq_Data;

  Which makes me wonder if the unflat data get past to RECONFIGURE an error must be returned or simply do nothing?