Sequence of pixelation and video output

Similar Questions

• XPS 10 and video output without the dock/keyboard

  Is it a cable out there that can leave my video output Tablet HDMI, without the need for the dock? This would be ideal for Netflix as I used on my iPad.

  Sorted. I need the following Dell adapter

  Accessories.euro.Dell.com/.../ProductDetail.aspx

• R830 satellite and video output via HDMI

  Just wondering if it is normal that my laptop for a max of 1280 x 768 HDMI to my TV LCD 26 '' exit?

  Its an i3 Satellite R830 with graphic hd3000. I have 8 GB of RAM. Tried on Windows 7 and 8 but the same thing.
  I tried custom resolution, but he's also saying on the TV out of reach.

  MT graphics driver is up to date and I got full HD working on this TV via another laptop old.

  Any suggestions please?

  I don t know your LCD TV listing, but always is he that external resolution depends on three options:
  driver graphics card, graphics card and the external device connected to the computer/laptop.

  So if your TV does not support a higher resolution, you will not be able to choose another resolution.
  If your TV supports a higher resolution but the graphics driver and the graphics chip would not support a higher resolution, you also won't be able to use it.

• Qosmio F10: How to record audio and video and use QosmioPlayer

  I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.

  The questions are:
  1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?

  2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?

  3. I only use VIDEO IN to WATCH is not to save: where is my fault?

  Thanks, Marco

  Hello Marco

  I did some testing and I can tell you about my experience on Qosmio G20.

  1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.

  It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.

  I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
  2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.

  Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
  3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.

  Good bye

• Audio and video out of Sync

  I capture images from video game using ShadowPlay recording at 60 fps mp4 files. When I import into first and play in the sequence, the audio and video are out of sync. When I play in VLC or Windows Media Player, the timing is perfect.

  Why first plays the audio and video synchronized?

  The corrections that I found online that does not solve the problem are:

  -Make the video in the work area bar (it actually makes it worse for some reason any)

  -Edit video in .mov file extension

  -I know how to use Handbrake to make the files before import has also been suggested, but I don't want to have this extra step added to my workflow, it should not be necessary.

  Any help on this would be greatly appreciated.

  Tempest tim wrote:

  Also, is there no other way to get around the problem of variable frame rate?

  Not if you use the GPU hardware to capture your h.264 videos, there isn't.  First can not correctly handle variable frame rate images.  And the images only you're going to get your encoder is VFR.

  You have 3 basic choices:

  (1) stop using ShadowPlay and use something else which will tax your system more to capture video in a constant frame rate format.  There are other applications that capture images CFR, generally in AVI format, and the resulting files are massive.  You will have a drop in performance in the game when you use these applications.

  (2) transcode w/parking brake to the CFR

  (3) use a different NLE.  Sony Vegas, from what I hear, will support VFR without problems.  Most other NLEs will not, including Premiere Pro.

• Satellite 5105 and 5205 video output bad piece (US)

  The video output is good on the 5105.

  The image on the LCD will not give a complete picture. Thirdly, the bottom is either hidden or replica the upper third of the image. Most likely, I see a drooping white or gray. This occurred when starting, too.

  I replaced the LCD screen with another of a deceased 5205. This time, only the first third shows an image. The lower 2/3 seem to be blackened.
  In addition, the Toshiba Spalsh screen logo does not appear at startup (maybe it's because it's in the field of electricity failure).
  I have not checked the State of the screen LCD 5205. I also forgot to connect this laptop to external video, when I used the
  5205 LCD.

  I just want to confirm the video cable needs replacing.

  I would like to know how completely detach from the Palm of the lower chassis. I read the instructions provided by the sticky thread. I'm stuck at the point where he seconded the palmrest except for the area around the speakers ' top'. Better yet, should what cables I detach before completely disassemble the palmrest?

  Once this is done, I intend to replace the video cable, but I also see what looks like a metal shield in the middle of the laptop. Any thoughts on treatment that, too?

  Blurred image of 5105: http://img526.imageshack.us/i/toshiba510501.jpg/
  Then the lower part is gradually degraded: http://img29.imageshack.us/i/toshiba510502.jpg/
  and: http://img196.imageshack.us/i/toshiba510504.jpg/
  and go: http://img262.imageshack.us/i/toshiba510503.jpg/

  Then I rebooted the 5105: http://img196.imageshack.us/i/toshiba510505.jpg/

  The 5205 is even more colorful!

  http://img12.imageshack.us/i/toshiba520501.jpg/
  http://img150.imageshack.us/i/toshiba520502.jpg/
  http://img262.imageshack.us/i/toshiba520503.jpg/
  http://img526.imageshack.us/i/toshiba520504.jpg/

  I'm afraid I forgot to test the video output on the 5205.

  I also posted this on Notebook Review.

  Thanks for reading!

  Hello

  I; m afraid; It looks a bit like a graphics card problem...
  If replacing the screen did not help the GPU could be affected.
  In this case, the motherboard should be replaced. It would be the worst case, because a motherboard is the most expensive part for laptop.

  In addition, you will not find any what manual disassembly here on the Toshiba page.
  These manuals are not for use public and created only for the technicians of the ASP.

  But the world wide web contains lot of information and I would recommend to google for some details.

• Qosmio F10 - 136 and D-video output

  I have a Qosmio F10-136, I want to use the D-video output with cable SCART. I ve tried to change BIOS, VIEW the section, but through the various options it s PAL (SCART) NOT. Only PAL (S-Video), 525 p. 750, 1125i, 525i NTSC (US), NTSC (Japan).
  My BIOS version is 1.20, I've followed the instructions of the FAQ5300XK0012R01 and TSB4A00TK000MR0.

  Hello

  Is your unit pre-installed with original recovery media and if the display driver is original Toshiba designed one?

• HDMI output on Apple TV 4 sends audio and video on TV, not just audio and video for TV to a stereo receiver

  Just hooked up our new Apple TV. Excited is no longer need to use both optical HDMI cables so that everything happens [with our compatible audio receiver HDMI.] But to hook the HDMI cable to the receiver, it sends audio and video to the TV. The audio will not play back via the receiver which is very annoying. Anyone else having this problem?

  It all depends on how your receiver and the TV are connected. the general idea that underlies the HDMI, is that he send audio/video in HD quality via the same cable...

  my system is configured - Live tv on HDMI1, HDMI2 on ATV, bluray on HDMI3 and cable optical audio output to receiver - no "entry" material I look at, the audio comes through tv receiver.

  on the other hand, my father has everything connected to the receiver via HDMI, which acts as a transition to television, but he needs to change the entry on BOTH the TV and the receiver...

  How is your audio connected TV to the receiver - it cable on which exit?

• When paused in the timeline the video is very pixelated and has red and yellow lines going down it

  When paused in the timeline the video is very pixelated and has red and yellow lines going down it.

  He plays very well, but when any display of still images he look like the image below. Someone knows how to fix this?

  

  Hey Danny,

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which select "remove previews."

  Try these steps and it should work.

  Check out this post on the forum for more details: Heads up on first with El Capitan

  Kind regards

  Navdeep Pandey

• I can't import any type of video file in the sequence, it represents imports video and audio. Please help me I am unable to work and I have clients waiting!

  I can't import any type of video file in the sequence, it represents imports video and audio. Please help me I am unable to work and I have clients waiting!

  Wild guess: I forgot to patch source the video track.

• A video that I shot is pixelated and fuzzy. I think I have the wrong codec.

  Hello!

  I shot images on a camera decent (not HD) - a Canon Vixia HFM30, it must have a decent image quality. I saw the regular difference between HD and video footage, but it's horrible. It was exported on a Mac on iMovie, then transferred to my Mac Book Pro. I tried to do some research online; He pointed toward the download or purchase the appropriate codec. Reading an article on Apple's site, it says to go to > Finder, then file, then > news > name and Extension to find the used extension. I don't see any extension. I know what they were referring. Here are a few links to articles that I met and I was not able to download anything useful, it does not download or does not help me.

  http://support.Apple.com/kb/HT3526

  http://support.Apple.com/kb/HT3523

  This image is a sceenshot of the film. Thank you for your time!

  The link that I posted a little over an hour ago has nothing to do with Morgan

  Media Inspector is designed to tell you what's really inside your video

  Here is the link to redirect http://mediainspector.massanti.com/ (link above goes here)

• Audio and video Shifted only in Premiere Pro

  Hello guys,.

  I'm having a problem with premiere pro with sync audio and video, which are stored in files separated by means of bandicam.

  These files are saved as:

  
  VIDEO:

  AVI Motion JPEG to the 720 p 30 fps
  
  

  AUDIO:

  Stereo PCM 48 kHz

  When I open the video file, via a media player like the one used by default on windows, I have no problem, but when I add these files in the timeline of a sequence in first pro, I notice that after some time (+-2 minutes), audio and video are starting to change and I don't really know why.

  In Premiere Pro, I tried the sequence with the video and tried settings with HDV 720p30. In both cases I had the same output two files moved after awhile.

  Someone knows how can I fix this?

  Kind regards

  FC.

  Is bandicam media variable or fixed rate? If you don't know, drag & drop a file on the MediaInfo program mentioned here, go to TreeView and see if it's the VFR or CFR. PrPro do not play perfectly with the media of VFR. Which many screenshot recorders produce.

  Neil

  Media Info: https://mediaarea.net/en/MediaInfo

• Importing animations and videos-videos are important to small

  I was searching for an answer to my problem. I have a project with animations and video. When I matter my animations, photos and music is the perfect size. When I import my video it's small in the display screen. Very small. If I import on another project, it is important properly. I don't know how to change the setting of the sequence before importing the video, or if I can import the video with different parameters. Help, please

  Apparently you create your your forests of animation sequences, then adding videos later? What image size are they? PrPro creates a sequence with the settings according to the material in FLAC to an area empty timeline, so if say your animations are defined in 1920 x 1080 and your video is 1280 x 720 and you started with the animation first, PrPro would create a sequence of 1920 x 1080, and when you put the video on the timeline it will put in the small box in the Middle , but the size of 1280 x 720.

  Say your animations and still images are 4096 x 2304, if the size of the sequence that you will receive, and if your video is 1920 x 1080, once again, you will get a small video in what appears to be a box in the middle.

  Maybe you should check your sequence settings by right-clicking on a sequence, then select Properties... post a screenshot of this back here.

  And also... What are the dimensions in pixels of your video media, your photos and your animations? Sounds like you may need to set your sequence to match your video and maybe use 'set of sequence' for your entertainment & stills if they are no longer large width x height as your video clips.

  Neil

• QuickTime h.264 first CS6 comes out pixelated and low quality

  I'm working on iMac OS X 10.7.5, trying to export to quicktime square pixels video h.264 1080 p 24 fps first CS6, but the video comes out pixelated and of poor quality. Help, please!

  Thank you all so much for your help! I finally managed to get a good export with the following parameters:

  Format: QuickTime

  Screening: Custom, 1920 x 1080, 24 fps, progressive, quality 100, H.264, target 6 Mbit/s, 6 Mbit/s AAC Max, 48 kHz, stereo

  Go to maximum depth, 24-bit

  Advanced settings: key frame all 72 images

  Bitrate settings: Limit date rate to Kbps 6 000

  Use the maximum Render quality

  The only thing that so I was missing before with mediocrity, output was tick the box "key fits all 72 images."

• Photos and videos are blurry loading

  For about a month, whenever I chaque fois que je vais'm going to online photos load blurry, as are videos. At the beginning it was just to do it on YouTube and so I thought it was manually loading funny, but it wasn't and then shortly after any kind of pictures, even those of high quality, load blurry/pixelated. The only kind of real answers I've seen are to use ctrl + 0, but which is not at issue. The Web page is fine, it's photos and videos themselves that are funny. My computer doesn't have a virus, I regularly clean my registry browser and I clean my cookies and cache. I've updated all my plugins and passed through them to see if one of these could be a problem, and this is not it no more. I don't know what is happening. Has anyone else had this issue or how I could solve this problem?

  This also happens to you if you save an image on your computer and open in another program?

  Try a clean reinstall and remove the program Firefox (C:\Program Files\Mozilla Firefox\) folder before reinstalling a new copy of Firefox.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you will also lose your personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall