Advice on the Sata Raid Controller

Similar Questions

• Satellite L645D-S4025 - need drivers for the SATA RAID controller

  Basically, I need the drivers to load my operating system, because at the time where he leans on my hard drive as unknown. I get BootMGR is missing error, so when I put my Windows 7 disc and go fix it is unclear what operating system is installed.

  So any help will be much appreciated. If you need more just information

  Hey,.

  Have you ever seen the Toshiba page? On this page you can download all the drivers and tools for your laptop:
  http://www.CSD.Toshiba.com/

  For this model with AMD chipset you can find the SATA driver in the display driver package, you must download the display driver. It also contains the SATA driver and chipset.

  But I m wondering why you started this question because there are already several discussions here in the forum about it ;)

• non - SATA RAID controller for C2100

  Hello. I'm trying to find a non - SATA RAID controller for C2100 but have trouble knowing what controller would correspond. All I can find are RAID controllers.

  Hello jodido74

  The H200 is compatible with the C2100. It has capabilities no RAID for SAS/SATA drives. It's the only option I know.

  Thank you

• Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

  Need drivers for the SATA hard/controller on the dv7-6c95dx disc.

  We load Windows 7 Enterprise on these newly purchased laptops, but do it have not the required appropriate drivers detect the hard drive on them. Impossible to find on the HP website.

  You can refer to a completely different question here, Marty. I was installing to a flash drive and it turns out that my install media has been connected to ports USB 3.0 on the left rather than right 2.0 ports. Moving to the ancient ports of 2.0 has solved my problem. Good luck.

• Amd Ahci Sata Raid Controller Win XP for Compaq 435 need

  Hello

  Information on my laptop:

  Model: PC portable Compaq 435

  Product number: LV474PA #UUF
  Processor: AMD E - 350 1.6 Ghz

  Memory: 4 GB of Ram

  Worm of BIOS: Insyde F.26

  I already install Win 7 Home Premium and it work very well.

  But my work using Win XP to do the installation in-plant printing machine.

  So, I bought this laptop because compaq provide xp for notebook driver... had no other brands.

  1st try boot with win xp appear suddenly BSOD... because it is impossible to find the driver for hard drive...

  in the bios, it has NO option to change the RAID Auto/Ahci RAID Auto / ATA

  So I integrated the sata driver (ahcix86.inf, ahcix64.inf) with win xp sp2 as well as with win xp sp3 using nlite...

  When to start from the cd then charge Setup until the message come out ahcix64.sys is corrupt / missing... I tried other driver version also came same result... I think that the driver is not the right for this laptop...

  I already have together spent 3 days looking for the right...

  the most recent I've tried driver is version 3.2.1540.75

  Please help me... Thanks yo

  I come, I see, I conquer

  With nLite_choose onlyahcix86 unless you install XP 64-bit. "Be sure to also check ' Textmode driver.

  Then a new XP slipstreamed the file cd_delete previously used. Make a new copy of XP cd in the folder.

  Dan has a step by step guide on integrated installation HERE

• ESXi 5.0 U1 could be installed on a SATA drive, but can't the SATA RAID

  This is the case:
  My physical server includes the Intel series E5-2600, Intel C600 (A for SATA) chipsets.
  In the VMware ESXi 5.0 Update 1 Release Notes, I find his support for chipsets Intel C600 and E5-2600.
  So I want to confirm if ESXi 5.0 U1 could be installed in my machine.
  In my test, ESXi 5.0 U1 can be installed with a SATA, but not SATA RAID drive. (Installed by CD)
  What's wrong?
  Waiting for your help.
  Thank you!

  Another feature that is missing in ESXi is caching block... So if you buy a hardware RAID card choose one with a battery to use the cache policy writing and write I/O faster.

• NVIDIA MCP55 SATA/RAID controller, not possible to mirror?

  Is it possible to configure the controller NVidia MCP55 under ESX4i a mirror?

  In the bios, it is possible, but ESX4i does not recognize the mirror and shows the mirror as 2 separate drives.

  ideas?

  Ronald

  Drivers for ESX (i) support software (also known as false) as the MC55 RAID controllers.  If you need RAID you will have to go with a hardware RAID card.

  Dave

  VMware communities user moderator

  New book in town - Start Guide quick vSphere -http://www.yellow-bricks.com/2009/08/12/new-book-in-town-vsphere-quick-start-guide/.

  You have a system or a PCI with VMDirectPath?  Submit your specifications to the unofficial VMDirectPath HCL - http://www.vm-help.com/forum/viewforum.php?f=21.

• LSI SAS3041E-R SAS/SATA Raid Controller

  The PCI - X version is in the official, but the above is PCIe and is not. They are both the same, just different interfaces. Has anyone used this controller or whether work with ESXi U3? There is no processor or memory card listed for this controller, so I guess than fakeraid his. Can anyone confirm?

  Nemasis

  LSI controllers are not usually false RAID controllers - those who are generally real RAID controllers.  In addition, if the PCI - X version of the RAID controller is listed, it is likely that the PCIe version will also work.

• Download the integrated raid controller dell perc, perc H730 > mini configuration utility

  Hello

  Could you please let me know where I can find the following utility software to download for windows server r2 2012? I need to use it to make the Online Capacity Expansion for raid 6.

  Thank you

  André

  You can't develop multiple VD through a disk group. You must remove the second VFD to reconfigure. You might be able to create a new VD with space, but you cannot expand existing ones.

• ESXi 6.0 installer did not drive on the second Raid Controller

  Hello!

  I want to improve my Testserver of 5.5 to 6.0.

  The server is an ML370 G5 with controller P400 Smar table 2.

  But the installer 6.0 only to find the drive on the first controller (Slot 1).

  If I change the disks from one controller to another, the installation program are the other disks.

  I used VMware-VMvisor-Installer - 6.0.0 - 2494585.x86_64.iso.

  I was able to install and everthing workes of other purpose, except the disk on the second controller P400.

  In/proc/driver/cciss/cciss * all this drive listed there.

  Anyone has a suggestion for me

  Thanks Andreas

  Hello

  We faced the same problem.  The P400 is no longer supported. Nor is the P600 and I don't think that the P800 is either.  Check the HCL.  You must stay on 5.5.  Same HP dropped support in his favor

  VMware KB: Obsolete and unsupported features in VMware ESXi 6.0

  "Some devices are deprecated in ESXi 6.0. During an upgrade, these device drivers can still be installed on ESXi 6.0 host and can continue to function, but the device is no longer officially supported on ESXi 6.0 "

  So basically you are lucky that he finds at least one of them.  Weird he did not find the two, but no matter what is not supported

• Can computer M9450F of office - do sata raid?

  If so, how?  I see the sata RAID controller sata under option 1, but can't figure out how to install 2 drives in raid...

  Can anyone help?

  n/m found that the 2 drives should be in sata 1 and sata 2 slots - and of course, with the bios set to plunder.

• W540 Option SATA (RAID or AHCI), disappeared after the update of the BIOS to 2.05

  W540 20BG001CGE, had 1.05 BIOS and RAID 1 with two 840 Samsung 1 TB EVO works well under Windows 7 - x 64. Do you have one (by lenovo recommended tool update) update BIOS with the Manager to update the bios to 2.05. Update went very well. After the reboot (and load defaults, disabling Intel Rapid Start, boot to BIOS option change the legacy of all first... I recognized the SATA (RAID or AHCI) in BIOS option disappeared. At boot time Intel Matrix Storage Configuration doesnot appear (where you can create RAID etc.).

  Startup then displays message "missing operating system".

  Downgrade BIOS 1.05 impossible, due to ISO file on www.lenovo.com support is not compatible, system message "Lenovo Group Limited - disc system not valid." Replace drive you and then press any key")

  (The link to the ISO file version 1.05 at the bottom of this page of links not a bootable ISO image)

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS039078)

  Also the downgrade to BIOS version 1.08 found here http://www.notebook-driver.com/detail/thinkpad-driver-id-22182/ doesnot work CD also messages "Lenovo Group Limited - invalid system disk - replace... »).

  Rewrite of the BIOS version 2.05 (GNET57WW) doesnot work (says "BIOS update is not necessary").

  Embedded Controller Version GMHT25WW (1.10) ME Firmware Version 9.0.22.1467.

  Anyone has a suggestion of what to try next? Someone has a tip how to recover my RAID controller?

  Thanks and have fun

  
  

• The RAID controller compatibility

  Hi I just bought a new system and intend to use a RAID controller to configure a RAID array.

  The controller that is available is ""Intel RS25DB080"." I've never done this before so to start I wanted to ask you how can I check if it is compatible with my x 99 Deluxe motherboard?

  (he did not appear on the page that mentions the compatible products: Specifications of RS25DB080 for the Intel® RAID controller)

  Secondly, it would be possible to set up several RAID arrays using a single controller? that is, if I want to do a table composed of 3 disks and another 3 more I have to buy an extra card?

  Also if this controller is not compatible what other controller I'll buy? And what exactly what I look for in a RAID controller if I'm looking for one? (Currently I just check to see if it's a SATA or SAS controller)

  So, basically, do not know much about the RAID needs your help, thank you!

  Generally if you are serious about RAID for the only real video editing solution is arec, because you will need 3 RAID or Raid 6.  There are a number of X 99 different systems with the Areca RAID card installed I am owner of a BOW 1883i, which works very well in my x 99 motherboard, I have it configured with 7 discs each RAID 3 Samsung 840 Pro I probably will be getting rid of it I can get nearly the same results with a SSD of unique m2.  In my old age, I went basic/simple rather than exotic.

• Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

  Hello world!

  Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

  (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

  (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

  (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

  I'll be very grateful for any useful info! Respectfully, Tianuchka))

  Hello:

  I would use it to HP... the description tells you what it does.

  The HP 6910P has the same controller and chipset as the 610 HP.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

  Who answers your questions first 2.

  Regarding the 3rd, I don't know whether or not you notice an improvement.

  If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

  Download, unzip and run the setup.exe file.  Then restart the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format

• Where to find the SATA drivers for hp a6745f desktop to install windows XP

  I have a HP a6745f desktop computer and try to install the hard drive from my old inside with windows XP on it, so I can choose between Vista or XP when I start my pc. My old hard drive is IDE and SATA supports only the mobo. I bought an adapter that converts the IDE to SATA, which recognizes the bios, but it does not start the windows xp operating system. I tried to do a clean install on FDI, but it reminds me of an error code. From what ive gathered research on the net, I need SATA driver for my mobo and SATA/raid controller. Ive read the indications on how to wake in os windows with "Nlite" disk, problem is questioned Nlite for the driver file, he wants a ".inf" file The only driver downloads ive found are executable in accession. mobo is MSI, chipset is AMD 780 G and video onboard is ATI radeon 3200.Any help would be appreciated, thanks.

  Shugninx, you can integrate without the sata driver AMD/ATI drivers. Most of the nVidia chipsets include the necessary drivers. This isn't Intel.