Advocate for help with fast storage Y500 disk cache

Similar Questions

• Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet?

  Dear all

  I need help with the following problem:

  Clicking on the tab help for help with photoshop first time get in "photoshop online help could not be displayed because you are not connected to internet" but I'm connected to the internet.

  Appreaciate help on this problem.

  MSD

  I find it easier and faster to use just this link, which goes to the same place as aid > online help for Photoshop:

  Using Photoshop | Photoshop help

  To bookmark so that you can find.

• Dialog box that says ' Creative Cloud Installer wants to make changes. Type your password for this purpose"- I type my password for Adobe ID (creative cloud), but it will not accept it. who should I go for help with this query?

  Dialog box that says ' Creative Cloud Installer wants to make changes. Type your password for this purpose"- I type my password for Adobe ID (creative cloud), but it will not accept it. who should I go for help with this query?

  It does not ask the cloud your computer admin password password!

• Need help with hardware (storage of 1 servers)

  Hello world!

  We want to put all our production and testsystems on ESX servers. We also have a redundancy, so that if a server fails, it could host all systems for the time beeing.

  We contacted Dell fo a nice solution and came it with 2 x 1950 and 1 MD3000. I know that we can not all HAL and vMotion with the MD3000, but for our purposes it would be bad enough if we could start these systems manually on the other server.

  As far as I understand is that both servers share the same storage and are locking the vmdk when used, am I right?

  I posted our HW we'll buy and I would be really grateful if someone could take a look and give their opinion on this system:

  See you soon

  2 x III PE1950 Quad-Core Xeon E5420 2.5 GHz/2x6MB 1333FSB

  PE1950 PCIE-Riser-Karte (2 card locations)

  16 GB (8X2Go dual rank DIMMs) 667 MHz FBD

  PE1950 III - other Quad-Core Xeon E5420 2.5 GHz/2x6MB 1333FSB

  2 x 160 GB Serial ATAu 7,200 rpm 1 3, 5Zoll slim Hot Plug able

  SAS 6i/R controller integrated C3/C2/C6 1 S

  DVD-ROM SATA

  PE1950 III Redundante power supply Kein Netzkabel

  Adapter Intel PRO 1000PT Dual Port Server, Gigabit NIC, Cu, PCIe x 4

  Unloading TCP/IP 2 p engine

  VMware VI 3.5, Foundation 2 CPU - SnS 1 year only

  VMware VI 3.5, Foundation 2 CPU, 1YR, NFI, license only

  PE1950 OpenManage Kit

  PE1950 III - C3, MSSR1, add in PERC 5i/6i or SAS6iR, min 2 / max 2

  Basic 1 year - next business day warranty - guaranteed minimum

  Base 1 S warranty

  3 years ProSupport for IT and NBD on-site Service

  1 Cluster-Crossover-Kabel (Kit)

  1 x PV MD3000 Extern SAS RAID Array mit 2 single Port Controller

  5 x 750GB SATA II 7, 2 k 3, 5Zoll III

  Keine SAS 5/E 1 sec Option

  Base 1 S warranty

  Basic 1 year - next business day warranty - guaranteed minimum

  3 years ProSupport for IT and 4 hours on-site after diagnosis

  Well learn you something new every day.

  You can share a logic unit number between two servers from an array of SAS switching, IE the MD3000 you look. Of course, you are limited to two servers.

  You'd be surprised iSCSI how fast is. Just because it's ethernet does not mean that it is slow. At my last job, we had a NetApp FAS3020 with FC and SATA disks connected to eight cores double 32 GB ram ESX host ~ 160 running virtual machines, and they have recently bought four servers dual quad core more with 64 GB to support ~ 120VMs.

  Certainly depends on what are your virtual machines, in your case, you can do much more disk IO and feel the need to drive faster, but a number of virtual machines in the environment above have been weather data processing and real-time flight.

  That said, if you do want to grow then two ESX hosts, will spend SAS keep things simple. I'll have to see on one of these loans...

  Good luck.

• Photosmart: Called tech support for help with my printer and got a sales pitch

  I called HP customer service today to get help with my wireless printer because it won't print wireless. What I got was a sales pitch to buy a value of $450 of virus protection! So very disappointed!

  Hello
  
  Thank you for using the HP forum.

  How can we help with your wireless?

  Have you tried the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926 & h_lang = on & h_client = s-h-E016-1 & h_keyword = DG - PDU
  
  Hope that helps.

• living person to contact for help with download

  Now Adobe Team - not good to serve customers paying leaving suspended on photoshop elements for windows 13 and the first lights. All 8 pieces downloaded cannot open in windows 8.1 SAY MISSINGFILE ARCHIEVE PART of ADOBE NEED all PARTS to DOWNLOAD COMPLETELY. SO HELP WITH DIRECT RESPONSE! NUMBER OF VOICELESS!

  Friend,

  To install Photoshop or Premiere Elements for windows, you will need to download the exe and 7z files. They usually end up in the folder to download unless otherwise stated.  Just make sure you put the two files in the same folder and double-click the exe file to install. Don't forget to download the version appropriate depending on whether your machine is 32-bit or 64-bit.

  Photoshop elements 13, 12, 11, 10 | 9, 8, 7

  First items 13, 12, 11, 10 | 9

• Ask for help with PHP to send an e-mail

  I have a family site. I use a PHP only access with that family members (portions glued and may not be complete)

  / * Adds a line of [] $authorization for each pair of login/password you want to add: * / (I have 30 odd)

  [$authorization] = array ('Big boy', '123456');

  $submit = $_POST ['submit'];

  $user = ";

  $password = ";

  $remember = ";

  If ($_GET ['user']) {}

  $user = $_GET ['user'];

  $password = $_GET ["password"];

  $remember = $_GET ["remember"];

  }

  If ($_POST ['user']) {}

  $user = $_POST ['user'];

  $password = $_POST ["password"];

  $remember = $_POST ["remember"];

  {foreach ($authorization as $loginpair)}

  {If (($user == $loginpair[0]) & & ($password == {$loginpair [1]}))}

  $_SESSION ['user'] = $user;

  $loginsuccessful = TRUE;

  }

  {If ($_SESSION ['user'] == {$loginpair [0]})}

  $loginsuccessful = TRUE;

  Then, on each page of my site, I

  <? PHP require('.. / Login.php ');? >

  I know that's not the best system... I'm afraid to try the mySLQ

  There is much information available to send the results of forms, but this isn't what I want to happen. As I create a session for the user, it seems to me that it should be possible for PHP to send me an email with the name of the users (the first time in the current session), a page is accessed.  By using the following code (from somewhere)

  <? php mail (' [email protected]', 'Topic of the e-mail', "The body of the email?");? >

  I get an email sent to me. But how can I get the name of the user, the time and date and... If possible, do it just send me an email once.

  I hope that my request for help is logical... I appreciate your time. Thank you

  Ralph3616 wrote:

  My 'desire' was to replace Scripture in a file which I then access through FTP to read, send the results in an e-mail message would be easier.

  If you use my code and create a $_SESSION in the login page and replace $_COOKIE for $_SESSION is exactly what he will do.

  If you are not ready to be a little more open minded and at least give it a go then I guess you're stuck with what you currently have.

• Looking for help with the motion in still menus of EI.

  Need help to make a menu driven sequelae. can understand the import process in yet. I can't the buttons I did in AE to work. Anyone?

  Read this (but do not have your plan until you read the link at the end of the post):

  http://help.Adobe.com/en_US/Encore/CS/using/WSF49EA5DB-3743-49C2-9831-F66328B192F8.html

  The important part is:

  «The loop point is used first to disable the buttons.» Until the loop is reached, the Viewer cannot select or activate a button. The menu returns to this point on each repetition, so the buttons are disabled when the menu is displayed first. For rehearsals, the duration is shorter and the starting point for all video content in the menu is offset. »

  So in AE, you create a video (the substance of the application) which includes the image of the buttons as they fly in. Still is the addition of highlights. AE for a period of time could also create layers of button, but you will be less confused if you use Photoshop and again for the file menu itself.

  I forgot to give you this link for help, which is the help file to work with AE:

  http://help.Adobe.com/en_US/Encore/CS/using/WSA5513911-0AD1-440C-BDAD-2E0E806B425E.html

  This method begins with a menu into Encore and creates an AE composition from there. It can only work with AE CS6, since you have EN CS6. I don't remember if it is technically a form of dynamic link, which requires corresponding versions of the applications.

  There are a lot of ways to skin this cat.

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.

• clean reinstall with fast storage intel ROM

  After a series of hickups, I recently found with a need to reinstall Win 7 on a Dell Inpiron 7250, which came with an SSD and a 1 TB hard drive. Hardware diagnostic shows no errors. The problem is that when I try to reinstall the OS OEM DVD of the Bios menu is set to Intel Rapid Storage, but installation is not possible. It seems there is no disk to install to. With the BIOS value AHC installation works, but I end up losing the SSD and Intel RST feature. Having quickly skimmed manual Intel, it seems that what Miss me is: option technology Rapid Storage Technology ROM. How can I reinstall the which?

  I need a set of foolproof step-by-step instructions that starts from a totally clean system. Can't help but wonder why the OEM DVD system is not able to put the system in place from scratch.

  1. Windows installation media, and the UEFI BIOS settings?

  Did you get a USB key of resettlement set to be installed in the UEFI with GPT partition scheme in FAT32? You have active UEFI, disabled SecureBoot and USB Debug active (USB 3.0 off):

  http://dellwindowsreinstallationguide.com/converting-your-Dell-Windows-reinstallation-DVD-into-a-reinstallation-USB/

  http://dellwindowsreinstallationguide.com/ensure-you-have-the-correct-SATA-configuration-in-the-BIOS-Setup-for-your-configuration/
  

  2 SSD Windows Boot/HDD data - recommended Configuration
  

  There are a few problems with SSD cache drives and SSD prices fell his best in most cases it is sufficient to replace the mSATA SSD with greater capacity (> 256 GB).

  This generally perform much better and much more reliable than a SSD cache drive.

  Ensure the exploitation of the SATA AHCI and use DiskPart to wipe the HARD drive SSD:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/useofdiskpart/

  Clean install of Windows on the SSD and then redirect libraries:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/solid-state-drive-and-hard-drive-configuration/

  3 SSD Cache drive Windows - Configuration public

  You mentioned the model as an Inspiron 7250 number, there is no Inspiron 7250, there is an E7250 of Latitude and PowerEdge E7250.

  Please confirm the model and what SATA driver, you tried to load.

  Ensure that the SATA Intel RS operation.

• Re: Request for help with Tecra A10-156 (Vista backup media)

  Dear members of the Forum

  I am the owner of a laptop Toshiba Tecra A10-156. As the owners of this model will be aware, the machine is supplied with Windows Vista pre-installed. Also supplied is a recovery of Windows XP Professional disc, which, once loaded on the machine, remove everything on the hard drive, including the operating system Vista and the Vista hard disk recovery partition.

  The documentation that comes with the laptop warns the user if he wants to take the Windows XP program on the computer, it must burn a DVD of backup software vista before you load the XP image because if it loads Windows XP without doing that then he loses everything to do with VISTA on the machine.
  Unfortunately, when I bought my machine, I did exactly this error and load Windows XP without backup Vista Software. Load the XP dvd, hard drive was completely wiped out, including not only the Windows Vista installation, but also the recovery partition.

  Although windows XP is a good operating system, I would like the ability to restore my machine to the factory setting. When I asked what to do with Toshiba, they said that the only way they could help would be to sell me a backup DVD of Vista recovery which would cost me a little money. (more than thirty books).
  They also mentioned that if I could find another owner of A10 - 156 using vista would be ready, they could burn a DVD using their recovery from vista machine and then I would be able to use this DVD to do the job.

  As I know personally of all other owners Tecra A10, I am writing to make a plea to ask if some A10-156 (it takes as the exact model) owner would please that nature to let me have a copy of VISTA backup medium please. Of course, I'd be more than willing to pay a total amount of the Virgin DVD (s) and shipping costs.
  If someone is willing or able to help should I very grateful indeed and hope to hear from a fellow A10-156 owner as soon as possible.

  Yours sincerely
  Ian in the United Kingdom

  I hope someone here can help and maybe you should put your e-mail address for direct contact.

• Need help with powercli report - thin disk

  Hello

  As always, the forums here have given me what I need, and I learned a lot. However my knowledge of script is still not at the level where I can combine all I learned. I would appreciate help.

  Basically, I want to write a report that shows the configuration of each computer drive virtual MORE stocked the size of the disc if the disc is thin.

  Currently, I have the following two pieces of code that run completely separately.

  1 - show me the size committed

  $report = @)
  #$allvms = get - VM
  {foreach ($vm to $allvms)
  $vmview = $vm | Get-View
  foreach ($disk in $vmview. Storage.PerDatastoreUsage) {}
  $dsview = (get-view $disk. Data store)
  $dsview. RefreshDatastoreStorageInfo()

  $row = "" | Select VMNAME DATASTORE, VMSIZE_GB, VMUSED_GB %
  $row. VMNAME = $vmview. Config.Name
  $row. DATA store is $dsview. Name
  $row. VMSIZE_GB = (($disk.Committed+$disk.Uncommitted)/1024/1024/1024)
  $row. VMUSED_GB = (($disk.Committed)/1024/1024/1024)
  $row. P = [int] (($row.)) VMUSED_GB / $row. (VMSIZE_GB) * 100)
  $report += $row
  }
  }
  $report | Out-GridView

  2nd - produces the majority of the report

  $report = @)
  $report = {foreach ($vm to $ALLVMs)
  Get-disk hard $vm | Select @{N = 'The virtual computer name'; E = {$vm. Name}},
  @{N = "RDM Name"; E = {($_ | where {"RawPhysical", "RawVirtual"-contient $_.)} DiskType}). File name}}.
  @{N = 'Data store name'; E = {($_ | where {"RawPhysical", "RawVirtual"-notcontains $_.)} DiskType}). Filename.Split(']') [0]. TrimStart('[')}},
  @{N = 'Name of the HD'; E={$_. Name}},
  @{N = 'Size of HD GiB'; E={$_. CapacityKB/1 MB}},
  @{N = "Format"; E={$_. StorageFormat}},
  @{N = "Clerk disk"; {E = {$_.Committed}}.
  @{N = 'Memory'; E={ }},
  Get - VM $vm | Select @{N = 'Memory'; E = {$vm. MemoryMB}}
  
  }

  $report | Out-GridView

  Thanks to those who submitted the code above, I changed a bit!

  Ideally, the 2nd report would contain a "Committed disk" column which shows the < committed > according to code 1.

  Any help or pointers gladly accepted.

  Unless you have a 1 vdisk in line with the strategy of the data (as already mentioned Conrad) store, I'm afraid, it's impossible

• Help with VC server and disk space

  We run our virtual Center as a virtual machine. It has a 90 GB virtual disk. I know that this is probably not advisable, but it was setup before coming. Disk is running out of space (3 GB remaining). I was wondering where all space is getting pulled to the top. I also wonder what to do next. I thought about simply expanding the drive as 150 GB. But I think that it is not recommended.

  Can someone recommend me a few options on what to do. I would like to do things and not to have any downtime.

  Thank you.

  If your database is local SQL (looks), and is 2.x and complete his recovery mode for SQL, you have probably some large translogs and you might also have a lot of data that has piled up over time in the database that could be purged.

  Browse the system files first, as you would with any other server, and find out what is using the space.   On the domestic ass that your database is in mode local recovery, full and the database is old for a few years and little or no maintenance has been done, this knockout can help http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1003980&sliceId=1&docTypeID=DT_KB_1_1&dialogID=9840420&stateId=0%200%2011555726

  If this isn't the PB or if these conditions do not apply, and if all goes well a search through the file system will lead you in the right direction.

• Phone call to home phone saying that Campeau Microsoft for help with my computer is infected with a virus?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:?  PH false calls from people posing as employees of Microsoft to help me with the infection by the virus. Others have similar appeals? 

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  The game, 6 January 2011 08:26:45 + 0000, spider legs wrote:

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:?  * Ph false calls from people posing as employees of Microsoft to help me with the infection by the virus. Others have similar appeals? *

  * You have problems with programs * error messages * recent changes made to your computer * that you have already tried to solve the problem

  Please, in the future, remove all the verbiage above when you ask for a
  issue. It has nothing to do with your question. And ask your
  questions in the body of the message, not in the title. The title
  should be used only for a brief description of what is the question
  everything.

  Your phone call was a scam. This has been a very common scam these days. Hang
  upward on the appellants as this.

  Ken Blake (MS-MVP)

• Ask for help with reinstalling Windows 7 on Sony Vaio

  Hi all

  I have a Sony Vaio Y Series in which I installed a pirated Windows and also improved version at 10. After these two cases, my laptop has become very slow and can barely use it. Now I want to reinstall the Windows 7 Home Basic 32 bit original version which is pre installed, but I don't know if I have a DVD with it or not.

  If I buy an original Windows of any of the online sites, it'll work, or must it be model specific?

  Can someone tell me how to restore the original version now? I don't have the bifurcated drive where the original should have been in the store. I am based in the India but bought the laptop in Saudi Arabia.

  Any help will be really appreciated.

  Contact Sony:

  Sony

  https://servicesales.sel.Sony.com/Ecom/accessories/Web/welcome.jsp

  1-800-488-7669

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?