Æ copy my files to another location during import?

Similar Questions

• Import error "some operations not carried out. Could not copy the file to the location requested.

  I have the demo version of LR. I imported the pictures that were on my hard drive. Now, I can't import more photos when I want to add new ones. I get a screen that says that some operations have not been performed. Could not copy the file to the location requested.

  Help, please. I don't know what else to try.

  If these images are already on your hard drive, you must use the Add option.

  If they are on a USB key and you want to copy them to your hard drive during import, then the Destination you have select this option to copy them doesn't have the appropriate permissions for your user name. , Select a different Destination or change the permissions on the folder that you selected.

• I can't import pictures from a card file or anything like that.  I get "could not copy a file at the location requested.  It's never happened before.

  I can't import pictures from a card file or anything like that.  I get "could not copy a file at the location requested.  I've never had this happen before.  I use a MacBook Pro

  well, I understood my question, maybe the same thing for you...    The catalogue was somehow the problem, I created a new catalog and everything works well again.  I assumed that the catalog has been damaged during the import failed because the network connection.   hope that helps

• Hi, I have the latest version of lightroom. It works fine until last night when I tried to import some files in lightroom. It will come out with a message "could not copy a file at the location requested. (113)

  Hi could someone help me with this problem.

  I tried to import pictures to destination Macintosh HD or my external hard drive but it continue to go out with the same message "could not copy a file at the location requested. (114) items 1-100: articles 101-114.

  Interestingly, it was working fine up until yesterday.

  I tried restarting computer, I have the latest version of lightroom, I use Mac Os x Yosemite 10.10.4

  Thank you very much

  Hi josepht,.

  Looks like your destination folder does not have a full read and write permissions.

  Try to set the destination as a specific folder that contains all the permissions on your local or external drive, then, check.

  Kind regards

  Claes

• Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "coul

  Could not copy a file at the location requested. Mac OS 10, Version 10.10 [1].

  I JUST bought this new macbook pro and Lightroom installed, imported 2 lots of pictures, but all of a sudden he kept denying my imports with "could not read the file" or "couldn't copy file at the location requested.  Help, please!

  Your use of the word "files" (in the plural) still makes me believe that you have not checked the permissions on the folder that is appropriate (in the singular).

  You must determine the Destination of the Lightroom Import dialog window Panel and see which folder Lightroom is really tr6ing to copy photos in (which may have been accidentally changed and is not what you may have used in the past) and change the permissions to write to this folder.

• How to copy the database using rman file from another location.

  You can clone data base using the files of rman backup from somewhere else (on the server to clone).
  
  I have two server db source and clone db server.
  I normally copy the files of RMAN backup to clone server (under the same folder structure, as it was on the source server).
  
  The purpose of the test, IE I don't have same partition and free space on the source server and the clone.
  
  I usually use under notes to the clone.
  http://trysellit.com/hosting/Ttrail/Fajr.php?doc=wtrail & ND = 0556200
  
  I would try to explain for example again.
  In source server, my rman backup are stored in / U01 and clone server, I copied the files of rman /u04. What step I should take to clone to work anywhere else?
  
  Using Oracle 10 g on Linux RedHat.

  sape007 wrote:
  Thanks Ken & PrafullaNath.

  BUT my question is: how to transport .dbf files in another place on the clone (I already do).

  Rather:
  The clone is on another server. How to restore by copying the RMAN files from another location on the clone. Please read description above in its entirety.

  Sorry for not being clear.

  Please see my video tutorial. In this tutorial that I take backup of the database, copy the backup to the different server and perform a recovery disaster

• [LR4] Could not copy a file at the location requested

  Hello

  All of a sudden started to experience this problem when you try to import * all * images (jpeg or cr2). Tried to import the camera card SD and a folder on the desktop. You do not permission issues.

  Error:

  Some import operations were not performed.

  Could not copy a file at the location requested. (XX)

  System information:

  Lightroom version: 4.0 [814577]

  Operating system: Windows 7 Enterprise edition

  Version: 6.1 [7601]

  Application architecture: x 64

  System architecture: x 64

  Physical processor count: 4

  Processor speed: 3.3 GHz

  Built-in memory: 8175,1 MB

  Real memory for Lightroom: 8175,1 MB

  Real memory used by Lightroom: 251.5 MB (3.0%)

  Virtual memory used by Lightroom: 230.3 MB

  Memory cache size: 0.0 MB

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1080, 2) 1920 x 1080

  The application folder: C:\Program Files\Adobe\Adobe Photoshop Lightroom 4

  Library path: C:\Users\xxxxx\Pictures\Lightroom\Lightroom 4 Catalog.lrcat

  Settings folder: C:\Users\xxxxx\AppData\Roaming\Adobe\Lightroom

  I tried to uninstall Lightroom and reinstalling, tried to create a new catalog - same question. Any help would be appreciated.

  Resolved:

  It turns out that LR was attempting to import to/Users/User/Pictures instead of C:\Users\User\Pictures.

  Don't know how it happened that I wouldn't change a thing - I'm just glad things are working again.

• Copy files to another location without DateModified change using Javascript

  Hi Expert,

  I have a problem while copying a file from one place to another place. If I copied and paste manually, the update is displayed both as the same as the copied file. But if I did it with JS codes, show the date of the day for all (created, modified, accessed). I want the same as the copied file.  I worked on this in Java. But I need made using Javascript. Can someone help me...

  My code is:

  File ("C:\\Users\\Indesign\\Desktop\\New folder (2)-abc\\1.jsx").copy("C:\\Users\\Indesign\\Desktop\\New folder (2)"------xyz\\1.jsx "")

  Thank you and best regards,

  Vel.

  I'm sorry for the late reply, was unable to come down to that earlier.

  Here is an example:

  Main();
  
  function Main() {
      if (File.fs == "Windows")  {
          var file = new File("/E/Temp_1/Test.txt");
          var destinationFolderPath = "/D/Temp_2/";
          var destinationFolder = new Folder(destinationFolderPath);
          if (!destinationFolder.exists) destinationFolder.create();
  
          var vbScript = 'Set fs = CreateObject("Scripting.FileSystemObject")\r';
          vbScript +=  'fs.CopyFile "' + file.fsName.replace("\\", "\\\\") + '", "' + destinationFolder.fsName.replace("\\", "\\\\") + "\\" + file.name + '"';
  
          app.doScript(vbScript, ScriptLanguage.visualBasic);
      }
  }
  

• Could not copy a file at the location requested

  I used 4 LR several years but now I can't import my files to LR - "some import operations were not performed. Failed to copy a file to the requested location. »

  I can't fix this annoyance, I'm sorry.

  Well, then I suggest that there is cut here... you do not check the folder where the picture is supposed to be copied, you checked another folder...

• When I copy the files to another drive I lose sight that I put in place

  I have a folder of music with MP3s set up for show, track, year, artist, Album name, duration, and then sorted by Album title and show in groups.

  When I try to copy these files to a different drive (such as a backup copy), they lose that point of view I have Setup and it wou; d take me a long toime to reset the points of view for all folders is not good.

  Hello

  When copy you it to another drive, it will take the default order of windows.

  For reference:

  http://support.Microsoft.com/kb/306554

  http://support.Microsoft.com/kb/812003

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

• move the primary database files to another location

  Hi all
  
  I move the files of my primary database to another location on the same server, but on a different drive (from f: to G :) with rename comand but file name will be the same, after you have moved the files what step I need to perfom on standby DB will have on my database pending?)

  This doc is everything after you rename the primary file, I'm not rename all the files I need to just move file from one place to another without changing the file name.

  I hope you know how to move files from one place to the other on the primary database. It's not just copying the files from one disk to another and then to go to the top of your database.

  You rename your data files or copy it to another location, how the controlfile to know you have copied/renamed to a different location?

  I guess you 1 to ask the question of how to move files to a different location in primary education and then move on standby.

  Steps to follow:
  1 Hope you brought your primary database.
  2 copy the datafiels to one disk to another.
  3. attach the primary database.
  4 rename all data files that you moved to this control file would know the changes.
  SQL > alter rename file 'G:\oracle\user01.dbf' to 'F:\oracle\user01.dbf ';
  5. subsequently open the database.
  Refer this to move data files from one place to another http://www.orafaq.com/wiki/Move_datafile_to_different_location, http://www.adp-gmbh.ch/ora/admin/move_datafiles.html

  on autonomy in standby:
  1 cancel the MRP
  2. change the db_file_name_convert to point to «F:\»... »
  3. Mount the backup database
  4. start the MRP

  Hope that these steps are clear.

• I can script volume shadow copy service files to copy VSS files to another server?

  Hello

  Wanted to ask if it was possible to take the info created by VSS and move it to another server? The reason why I ask is that I need to information to a file on a backup server, copy it to another standby server and have it ready to go when the original bang goes machine!

  While enjoying the fact than expected jobs work fine with the backup software and can copy the file backup due to another server as a :-) scheduled task I can't put automated restoration work to restore back this folder on a daily basis by using the backup of windows server or backup exec (very annoying!). I was wondering if I could create shadow copies of the file/volume concerned on the original server, and then have a script that has copied the files on the backup server?

  Just in addition, the concerned files/folders are usually left "open" or "locked" (these include mdb files too!) so just using xcopy etc will not work :-(

  Any ideas or suggestions would be welcome :-)

  Thank you very much for your help

  Kevin

  I suggest that you take cela Server TechNet or TechNet IT Pro forums.  This forum serves users with Windows home versions.

• Unable to copy a file to another directory - no reason given

  When you try to copy files to another directory, I gor a message that lightroom can not copy.

  I have a screenshot of the message (in Dutch).

  The reason why he cannot copy is not given...

  According to the message, it seems that the place where you're travelling doesn't have enough permissions.

  Make sure that the destination folder has full read and write.

  Restart Lightroom after applying the permissions and then try again.

• probkem to copy a file to another directory

  Hello

  my page contains af:inputfile.

   <af:inputFile label="#{viewcontrollerBundle.SELECT_FILE}" id="if1" value="#{docbean.file}"/>
  

  the user must use this page to browse any file in its machine and uploaded on the server

  I use FileUtils.copyFileToDirectory () to copy the file into the directory. This method comes from org.apache.myfaces.trinidad.model.UploadedFile;

  It's the body of the method

  import org.apache.myfaces.trinidad.model.UploadedFile;
  ....
      public void uploadToServer(ActionEvent actionEvent) {
          UploadedFile myFile = (UploadedFile)this.getFile();       
              File outputFile =         
                  new File("D:\\SystemsData\\ScannedFiles\\" + this.getCurrentDocId() + ".tif");
              try {
                  FileUtils.copyFileToDirectory((File)myFile, outputFile);
              } catch (IOException e) {
                  e.printStackTrace();
              }
  

  at run time when I press the upload button, I get this error

  java.lang.ClassCastException: org.apache.myfaces.trinidadinternal.config.upload.UploadedFiles$FixFilename cannot be cast to java.io.File
  

  My Question is:

  How to make a cast of org.apache.myfaces.trinidadinternal.config.upload.UploadedFiles in java.io.File

  You cannot mount a the UploadedFile to a file. You must copy the inputstream provided a the UploadedFile in the file. I suggest that you download Commons IO - overview of common IO and use IOUtils to archive it.

  You can watch JDev11.1.2.1.0: manipulation of images/files ADF (part 2) | JDev & amp; ADF Goodies createBlobDomain (file UploadedFile) method that shows how to create a BlobDomain on the stream. In this method, you will need to write to the stream pointing to your target file.

  Timo

• Copy one file to another layer in PScc2014

  I think I saw a way to copy a layer from one file to another, when I'm in the consolidate all to tabs mode. Visible image one slide, or otherwise a layer to one of the tabs at the top of the window and this copy the layer to the image on this tab.

  I can't get it to work,

  I don't know about the 'double layer' selection in the layers panel, but there seems to be another faster way. I imagine this?

  I use iMac, Yosemite.

  Thank you

  Vince

  Same thing here. Photoshop CC, Yosemite.

  What you are to select the layer on the source document that you will move. Use Opt + eyeball to hide all other layers, so you can see clearly what you are moving. Do not do anything dragging them from the layer panel, open the document window.

  Then select the tool travel, go in the document window and drag this layer on the other file document tab until it opens.

  Then, drag and drop in your destination document. You could hold down the SHIFT key if you want to Center until you drop.

  It works in CC and CC 2014.

  Gene