probkem to copy a file to another directory

Similar Questions

• Unable to copy a file to another directory - no reason given

  When you try to copy files to another directory, I gor a message that lightroom can not copy.

  I have a screenshot of the message (in Dutch).

  The reason why he cannot copy is not given...

  According to the message, it seems that the place where you're travelling doesn't have enough permissions.

  Make sure that the destination folder has full read and write.

  Restart Lightroom after applying the permissions and then try again.

• Copy files to another directory

  Before I'm going to reinvent the wheel again, does anyone know a LabVIEW feature that can perform the following operations:

  If I have a folder with files A, B, C, D, E, F, G

  and another file with only the files A, C, D, E

  Is there a function that checks the contents of the folders against anothers, and then copy all files that do not exist in the other folder?

  On the top of my head, I think I could write something that could do this, but if it exists, what's the point .

  I recently put in place something like this, but probably too specific to my files to help you. Using the following screw, you should be able to establish a fast enough:

  1 recursive list of files

  2. check if file or a folder exists

  3 copy

  These are all locate file IO, Advanced File Functions.

• I can script volume shadow copy service files to copy VSS files to another server?

  Hello

  Wanted to ask if it was possible to take the info created by VSS and move it to another server? The reason why I ask is that I need to information to a file on a backup server, copy it to another standby server and have it ready to go when the original bang goes machine!

  While enjoying the fact than expected jobs work fine with the backup software and can copy the file backup due to another server as a :-) scheduled task I can't put automated restoration work to restore back this folder on a daily basis by using the backup of windows server or backup exec (very annoying!). I was wondering if I could create shadow copies of the file/volume concerned on the original server, and then have a script that has copied the files on the backup server?

  Just in addition, the concerned files/folders are usually left "open" or "locked" (these include mdb files too!) so just using xcopy etc will not work :-(

  Any ideas or suggestions would be welcome :-)

  Thank you very much for your help

  Kevin

  I suggest that you take cela Server TechNet or TechNet IT Pro forums.  This forum serves users with Windows home versions.

• When I copy the files to another drive I lose sight that I put in place

  I have a folder of music with MP3s set up for show, track, year, artist, Album name, duration, and then sorted by Album title and show in groups.

  When I try to copy these files to a different drive (such as a backup copy), they lose that point of view I have Setup and it wou; d take me a long toime to reset the points of view for all folders is not good.

  Hello

  When copy you it to another drive, it will take the default order of windows.

  For reference:

  http://support.Microsoft.com/kb/306554

  http://support.Microsoft.com/kb/812003

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

• Moving the local/flatfile file in another directory after loading?

  Hey,.

  After you have successfully loaded my (local) flat file of the HIVE, now I need to move it to another directory on the local system, so that a new flat file may come instead and so on.

  Is anyway to do this in ODI? Any procedure that I can write?

  Spend your order:

  1) OdiFileMove '-FILE =/home/hive/sample/sample_1.txt "" '-TOFILE =/home/hive/used/sample_1.txt ""

  OR

  "2) OdiFileMove " "-FILE =/home/hive/sample/sample_1.txt" "-TODIR =/home/hive/used.

• Copy one file to another layer in PScc2014

  I think I saw a way to copy a layer from one file to another, when I'm in the consolidate all to tabs mode. Visible image one slide, or otherwise a layer to one of the tabs at the top of the window and this copy the layer to the image on this tab.

  I can't get it to work,

  I don't know about the 'double layer' selection in the layers panel, but there seems to be another faster way. I imagine this?

  I use iMac, Yosemite.

  Thank you

  Vince

  Same thing here. Photoshop CC, Yosemite.

  What you are to select the layer on the source document that you will move. Use Opt + eyeball to hide all other layers, so you can see clearly what you are moving. Do not do anything dragging them from the layer panel, open the document window.

  Then select the tool travel, go in the document window and drag this layer on the other file document tab until it opens.

  Then, drag and drop in your destination document. You could hold down the SHIFT key if you want to Center until you drop.

  It works in CC and CC 2014.

  Gene

• I want to copy all my jpg files to another directory (a portable hard drive) with some of the same names of JPGs, but not necessarily all. What will happen? The word 'COPY', will be some of the deleted files be added or nothing at all.

  I have a LOT of pictures in my computer (over a thousand) and I want to put them on a portable hard drive, I bought (1 terabyte) but I won't write any of the names of existing files with different images. IS THIS POSSIBLE? Do I need software or special hardware? I tried the copy/paste standard as well as move files to the new directory, but it seems that I can lose files. I'm not sure if the files that are missing (or lack, in my opinion) are not copied. When I finished emptying the directory, it shows that it is empty but the new directory does not seem to have any additional files that should be there based on the counting of the files before and after.

  Thanks for any help you can provide, Bill

  1: right-click and then drag the pix on the external drive. Release the right mouse button and choose copy here. They are there?  Now remove it from the computer.

  2: you can see pix of the same name overwrite each other, or be done with (1), (2), etc.. But even in this case, they will be interspersed with the former. If keep you them in separate folders with different names, that should not happen. Personally, I rename all the pix before storing them. You can select the set instead of the code of the camera and a group, rename the first holiday 2009 yo and the rest will be renamed holiday 2009 and each havf will one (1), (2), (3), after them.

  It is also a nice freeware tool which, among other things, can rename a group of photos easily.

  FastStone Image Viewer
  http://www.FastStone.org/

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• How to copy and paste a txt file in another directory

  It seems very simple. I used the "copy" of the function of advanced file. It worked fine until I created a standalone one. He made mistake and did not do what he did.

  Any idea?

  Thank you

  Opt_Ottawa

  Maybe a problem of path.  Remember that when you build your program into an executable, the executable file is added to the path, and you end up with a path of band more needed to get where you were during development.

  Do you have a miscarriage 7 has occurred to the new file?

• LoadLibrary fails with error code 5 after cloning project and SCF files to another directory.

  I have a project which communicates to an instrument on a USB UART.   The instrument telemetry packages are defined in the DLL that the main application load using LoadLibrary with a relative at the entrance path.  The plugin DLL is two directories below the application of all executable has been working well for months until I had need to clone the project (using Hg).  The cloned project is no longer responsible for the DLL.  The DLL is not corrupted as I can hard code their paths in my initial project for them and load them very well.  The cloned project concludes files (using GetFirstFile), so I know that the path string is corect, but that it is impossible to load the DLL using LoadLibrary.  The error code returned is 5.  Has anyone seen similar behavior when you try to copy or clone a project?

  Thanks for any help you can give!

  When you move or copy projects from one place to another I just copy the entire folder + subfolders and never had problems: CVI warns that roads had to be fix al corrects itself. However, error 5 should be "Access denied" then you can check the properties and the safety of the files copied to ensure that your code can access it properly.

  Otherwise, couldn't place the dll in some of the standard search paths? You will thus avoid problems in cases like yours.

• Copy one file to another email address

  I have the address book for different groups.
  Some of the addresses may be common to several groups.
  I want to copy, not only move, an E-mail from one address book to another because the groups change members.
  I don't want to have to recreate a new contact whenever the group changes.

  How to do this.

  Standard computer skills.

  Hold down the Ctrl key everything to drag and drop the contact with the other address book. You will see a sign more seem to indicate a copy and not move.

• I am trying to copy a file to another folder, I have the file open, how do the other folder along the side so I can drag and drop

  I have a file on a cd - rw that I try to copy to a different folder, I open the file, but how can I get the new folder the long side so I can drag and drop

  Hi tommckeith,

  ·         What version of the operating system is installed on the computer?

  ·         You try to move the file on the CD to the computer or inside the CD?

  If you want to move the file on the CD for computer, follow the steps in the article.

  Move and copy files using drag and drop

  http://Windows.Microsoft.com/en-us/Windows7/move-and-copy-files-using-drag-and-drop

  Copy and paste a file

  http://Windows.Microsoft.com/en-us/Windows7/copy-and-paste-a-file

  If you try to move the file to the CD, then it is not possible to make changes on the data stored in the CD. You must copy the data to the computer, and then make the necessary changes. You can also make the changes before saving the data to a CD.

• Æ copy my files to another location during import?

  When I import videos or photos in AE, they automatically copied to a different location on my hard drive?

  N ° AE uses the original file path to the imported elements.  For example, if you import a film located on an external drive, then disconnect the drive, AE displays the bars of color to indicate that it is not the images.

• Why color does not change when I copy one file to another?

  I have 2 indesign files.  It has a layer of background color I want to use.  so I select, then copy it and then paste it in the second file - where the color looks like, and prints, very differently.  duller be precise.  Why does the color remains the same because I made no change, just copied and pasted?

  Thank you!

  There may be several reasons:

  1. Color uses a shade that bears the same name in the target file, then the color in the target file replaces the color in the source file.
  2. You move between files with the merger of transparencies RGB space and transparency CMYK mix space (look in the Edit menu).
  3. The files have different color profiles and color loses saturation when displayed using different profiles in the two files.

• Work of multilayer of copying one file to another; keep the layers...

  I have a complex drawing that was one part I paint in a separate document. In the second document layers do not exist in the destination document.

  
  

  Is it possible to copy and paste art so that items are kept for their separate layers and at the same time to create those layers in the destination document when you paste the vectors?
  

  Bill,

  Layers of dough remembers must be enabled from the context menu of the layers.