AE CS4 only recognize 2 processor cores...

Similar Questions

• How to change the number of processors / cores

  I have virtual machines that I have to move periodically between 3 computers main host that I use:

  1 Intel Core 2 Quad CPU with Windows 7 Home Premium 64 - bit - 1 processor with 4 cores

  2 Intel Core i7-2630QM CPU with Windows 7 Home Premium 64 bit - 1 processor with 4 cores

  3 Intel Core 2 Duo T7700 CPU VT with Windows XP 64 bits - 1 processor with 2 hearts

  Hosts running VMWare workstation 7.

  Most of my virtual machines running XP 32 bit and have been initially created for my 3 platform.

  When I move my machines between computers I see that the parameters of the Virtual Machine for my change of processor in (for me)
  in unpredictable ways. Sometimes it shows 1 processor and gives me a choice of up to 4 cores.
  in other cases (always on a 4 base platform) 1 single processor with 1 core, in other cases, with 1 core 2 processors.

  In most cases, my freedom of choice is limited, because the selection of the number of cores is grayed out.

  When I try to make changes by editing the vmx file, I find them ineffective (no change).

  The other problem I think is that my VMs run VERY SLOWLY on my i7 with 8 GB platform!
  I have no idea if this is related to the improper setting of the number of processores / cores (I'm not able to define
  1-4-hearts and spin with settingsd 1.1 instead).

  Could someone please help me understand how:

  1. check / change the number of processors / threads on an existing virtual machine.

  2. how to set properly for an i7 processor

  Thanks in advance,

  Andrew

  1. providers that create virtual machines are in a race - they assume that customers use this version which proposes to use the virtual processors more ;-)
  For some workloads inside a virtual machine - say Oracle or other database and applications servers such that it is sometimes really good idea to use more than one virtual processor

  2. virtual machines to scale differently with more CPU than the real computers.
  Virtual machines are for host applications.
  This means that the host schedules the time CPU to each virtual machine.
  If you follow this thought that you will see that a virtual machine that uses one virtual processor has a greater chance to run then a VM with 2 virtual processors.
  A VM with 4 cores running on a host with 4 cores will spend a lot of wait time - it may work only when the host reports the application of Workstation 4 hearts are available.

  A virtual machine with only 1 vCPU will probably be able to run all the time without any waiting time.
  This is why usually with a single CPU VMs feel better to the needs of the user.

  This translates into the best practical advice: assign a CPU unless you really notice you need more.

  3. probably, you try to change the values, while the virtual machine is suspended?

  4.
  numvcpus = '8 '.
  cpuid.coresPerSocket = "4".

  We hear two processors with 4 cores of each

  numvcpus = "4".
  cpuid.coresPerSocket = "4".

  means a processors with 4 cores

  numvcpus = '2 '.
  cpuid.coresPerSocket = '1 '.

  We hear two processors with a carrot

  No effect? n ' mind that not all clients can use 2 or more processors
  For example, XP is limited in this respect.
  Some guests may also not change the number of CPUS after what they have been installed

• Isolate processor core

  Is it possible to dedicate a heart of processor together for a virtual machine?  With the processor affinity, I will devote a virtual machine at the heart of a processor.  This virtual machine running only with the heart that he has an affinity with.  However, other virtual machines can always run on this core.  How can I insulate a whole CPU core to be used by a single virtual computer?  The other processor cores should be free of any of a large number of virtual machines - run using Affinity processor for all the virtual machines so that a VM can have its own core is not an option.  I just need to dedicate a carrot to a vm, and keep the other each vm to access.

  (Note: this is all terrible design and not best practices that I realize - it is independent of my will to tell how to do but be aware if it is theoretically possible)

  Thanks for the input

  You are right. But remember that each vCPU is programmed according to the CPU scheduler.

  This means that:

  • 1 vCPU by pCPU
  • Timeslicing for the principle of equity, even if you isolate a Jepp. so a vCPU is going to be tended if it reaches the end of its timeslice, because no other vCPU run on the Jepp this will be scheduled immediately.
  • Other worlds, BHs and interruptions of must be published too, so assign a second Jepp to eliminate vCPU and competition for the time of the worlds.
  • The VMkernel uses all pCPUs available for the planning of its process, it does not take into account a virtual machine with the processor affinity.

  Tip:

  • If you are running on a NUMA node, set the affinity of the memory to avoid distant memory.
  • "Off to assign" the Jepp second on all other VMS as well, because the CPU scheduler can (more to the difference, but there is no guarantee) migrate the vCPU thread to the other processor for balancing purposes.

  Frank Denneman

  Co-author of: vSphere 4.1 HA and DRS technical Deepdive - now on Amazon

• After I installed el capitan my imac only recognizes my external sound card line! It's a focusrite 2i2

  After I installed el capitan my imac only recognizes my external sound card line! It's a focusrite 2i2

  Did you try a reset of the SCM and hope that the problem is solved?

  • Reset the management system (SCM) controller on your Mac - Apple Support

  What does the computer when started in safe mode?

  • Try safe mode if your Mac does not end commissioning - Apple Support

  You have a copy of backup clone of the previous OS X and its applications?

  This is usually a preventive measure to be still able to use the Mac

  an upgrade path does not work as expected, so you have alternative.

  Or you can return to the configuration already in place, in offline mode.

  In any case...

  Good luck & happy computing!

• Microsoft Word only recognizes / prints first page of a multiple page document?

  I did something to my Microsoft Word program. I think it is the 2003 version. I have no idea of what I did, but now it will only recognize the first page of a document, I create. When I print it only prints the first page and the bottom of the screen never shows anything other than "Page 1". No matter how much time there is no 2 page or all the pages will be never created or printed. I looked to each icon and the option in the toolbar and may not know how to reverse this trend. Can someone help me? Thanks, Andrea

  Open Word and click Help > detect and repair.

  See if that helps.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Groups discussion board link above.

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  General discussion of Word Group.

  If you don't get an answer here, you can try the above.

  See you soon. Mick Murphy - Microsoft partner

• ProBook 450 G2: Upgraded to the 6th generation 4th generation intel processor core i5 to skylake

  My laptop is HP Probook 450 G2. And my processor is 4th generation Intel Core i5. So, I want to upgrade my processor CPU 4th generation intel core i5 to 6th generation intel processor core i5 to skylake. Can I put my 4th generation CPU intel core i5 processor in the 6th generation intel core i5 processor skylake? Pls tell me

  Laughing out loud

  You can't do this for a simple reason.

  The processor on the motherboard socket are not identical.

  4th generation Intel core i5 mobile CPU uses socket 1150

  6th generation Intel core i5 mobile CPU uses socket 1440

  It's a bit like trying to plug the power plug of the American unit to an electric outlet of the European House.

• How flip and save gradient CS4 only

  I've never been good with gradients but the gist.

  I did a 'Sky' degraded.  But when I want to "reverse" the gradient, I can't understand how do.  In other words, make a gradient as seen on the left below, then click on a button and it makes blue top and white on bottom.  See below:

  

  Also, once I have a gradient that is put in place, how save it is in my gradient swatches?

  I use Illustrator CS4 - only responses to this version of the software.  Thanks - Deaf Guy

  Mike,

  In the gradient palette, set the Angle to 90 degrees instead of the current 0.

• How the processor cores and RAM work?

  I'm abit confused as to how work the processor cores and RAM work? What is selecting 2 hearts the mac was still 4 processors and virtualization of Windows is limited to 2 hearts or virtualization of Windows has 2 cores and running the CMA may have 2 hearts ? The same for both RAM and also when is suspended the RAM of virtualization Windows continue to use mac RAM?

  Kind of a newbie question, but I'm new on this and have tried searching on Google and could not find anything on this subject, it was that most do just enough carrots or RAM rather than information.

  Best regards

  -Mark

  Welcome to the community - operating system MAC will always use all the cores by default. Fusion is an application running in the operating system, and when you run a virtual machine and it needs time processor, the operating system will set the virtual CPU on a core - and if you have 2 vcpus assigned it will plan each thread on separate kernel - memory is done in the same way that the virtual machine when it is necessary the OS it will plan to the applicattion.

  When you suspend a VM from virtual machines running it will still use some memory - to suspend the virtual machine, it is better to merge.

• Dell XPS 730 X - upgrade memory only recognize two sticks

  I upgraded my office 730 x 4 GB Crucial single DDR3 1600 MT/s PC3-12800 CL11 UDIMM unbuffered 240-pin Desktop CT51264BA160B Module of memory and the computer only recognizes two sticks.

  I tried reseating the memory sticks and not change.

  Any suggestions?

  Thank you

  Don't know how much RAM Kingston was physically installed during this test, but he sees only 8 GB. And no matter if the Crucial scan will work or not.

  The question is what is the maximum amount of RAM that can take in charge the BIOS and chipset of the motherboard?

  You can install as much RAM you want, but if the BIOS and chipset can use only 8 GB, there is nothing you can do to change that. So you can waste your time and money...

• CS6 Bridge does not recognize the videos but CS4 only

  Hi forum,

  My copy of Bridge CS6 suddenly stopped showing a preview for video files image and does not play the two.  Lightroom 4.4 and Lightroom 5 also do not recognize the video files (in .mov, of .avi, clamps to m...).  My Lightroom used to have no problem playing them.

  Bridge CS4 can see and play as usual.

  I'm running OSX 10.8.5 have purged my cache in Lightroom, uninstalled and reinstalled video, updated Quicktime.

  You need to reset the preferences.  Hold down the option key and launch Bridge.  You will get a window to reset.

• Adobe Master Collection CS4 works on Quad processors?

  I am buying a new computer (laptop) and I currently own Adobe CS4 Master collections and I would like to know if someone has installed this on a quad processor and what graphics card works perfectly with her? Also would what speed processor I need on a quad processor.

  Thank you.

  In comparison to what you currently have, the second option will not be a real upgrade. Performance gains will be limited, as is always is a core duo. Option 1 is OTOH a significant upgrade, because you are moving to a quad core with HT, so it will look like 8 cores.

  The i7 has a range so-called Turbo mode, which means that the BCLK (base clock) is multiplied by a number to give you a certain clock speed. Thermal and electrical reasons the number is quite low in standby mode or when there is no strain on the system, so the speed of 1.73 clock. It conserves energy, making your battery will last longer and generates less heat. Now when you turn the system on, the CPU is automatically limited to Turbo mode with a much higher multiplier, increasing the speed of clock to 3.06. Of course the energy consumption rises, battery life is reduced and time go up, so this is done only when the load is sufficient, as during the encoding.

  On the i7-920, for example, the multiplier when idle is 12, but can be increased to 20 under load (which gives a standard clock of BCLK speed x multiplier = 133 x 20 = 2.66 GHz). In Turbo mode multiplier rises to 21, which gives a 2.8 GHz clock speed. The new i7-720QM has an improved Turbo mode and can change the multiplier between 12 and 23 in Turbo mode.

  What it boils down to, is that the lower multiplier is used when you consider what text to use in your subtitle and typing that in, which is pretty fast at this moment, but when restore you the timeline or encode into MPEG or H.264, Turbo mode is used and the clock speed goes up to 3.06 GHz.

  A worry about option 1 is the resolution of the screen on your current system, only 1600 x 900 more enjoyable instead of 1920 x 1080 on a 17 "display.

  I saw the results of the benchmarks of this processor, so it will be difficult to make a guess on the performance gain, but my feeling is that it will be at least 2.5 - 3 times faster than your current system.

• HP Pavillion P6347c: Allow the processor cores

  This is the second time that I post this question, now with more information. I ran the HP Hardware Diagnostic and Test "Multicore" informed me that "only two of the four cores are enabled. How to activate the other two hearts? When I search the computer for the amount of available cores, it is said that two nuclei, yet all other research say that there are four cores of the processor. When checking with the Manager tasks two cores work. The processor is the AMD Athlon II X 4 630 processor. I checked in msconfig and still only 2 cores are available. Here, any help would be greatly appreciated.

  Hello

  Device Manager displays both physical and logical processors.

  Download CPU - Z to verify that you have actually 4 cores and 4 wires. The default CPU tab shows the number of hearts and son down.  This tools will flush out the inaccuracies with Windows may report errors.  This tool should "dispel" you.

• recognizes the triple core as a core

  Recently, I upgraded my pc on windows 7 from a single to a triple core AMD phenomenon 8550 processor. Although every time I check the Task Manager or cpuz shows only a kernel. I tried almost all the possible solutions, but I can't seem to solve the problem.

  Run the utilities posted below.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the option 'stress test' for a few seconds. If you have 3 active hearts it will show 3 test of columns, one for each carrot.

  Core Temp:
  The temperature of each core of the processor.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php
  Tab CPU, lower right corner list hearts and son.

  J W Stuart: http://www.pagestart.com

• Why my doesn´t OS Win2008 recognizes the vSMP (virtual CPU) 6 assigned, will only recognize vSMP 4.

  Hello

  Anyone know why my VM Win2008 OS doesn´t recognize the vSMP (virtual CPU) assigned 6 and do recognize that 4 vSMP?.

  I have the correct license for VSphere and VCenter, also in the guest OS device manager, I can see the six vCPUs but in the System Properties window, I can see only four vCPUs.

  I m running on ESX 4.0

  I hope someone can help me on this problem.

  P.S. I have attached images of system properties and Device Manager

  Thanks in advance!

  Windows Server 2008 Standard(32bit)--> 4 processors

  Windows Server 2008 Standard(64bit)--> 4 processors

  Windows Server 2008 Enterprise(32bit)--> 8 processors

  Windows Server 2008 Enterprise(64bit)--> 8 processors

  Windows Server 2008 Datacenter(32bit)--> 32 processors

  Windows Server 2008 Datacenter(64bit)--> 64 processors

  VCP4 | MCITP | Master ASE | CCNA

• Can how many processor cores I use?

  Hi all

  I have installed a virtual machine with Windows 7 on an ESXi 4 host:

  • I can select up to 8 cores in the settings of virtual machines.

  • ESXi 4 has a vSphere advanced license key.

  However, the virtual machine shows only 2 processors with 1 core each. Can I use only two hearts in ESXi4, even if I use a vSphere license?

  If so, why I can select up to 8 cores?

  Thanks in advance,

  Andreas

  You can assign the number of vCPUs is determined by the level of license - http://www.vmware.com/products/vsphere/buy/editions_comparison.html, but you must always take into account the comments OS CPU licenses.  Windows see 2 vCPUs as physical processors and so just to use them.  To move, you must use the parameter of cpuid.corePerSocket - http://www.yellow-bricks.com/2009/06/04/per-processor-licenses-for-your-application/.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.