Satellite L875-116 turns off when installing graphics driver

Computer laptop L875-116 was caught in the cycle of continuous reboot (last driver loaded CLASSPNP. (SYS). Retrieved HARD drive recovery, but laptop still caught up in the cycle of rebooting to the 6/49 - graphics driver.

Attempt to retrieve the DVD, new was wobbling at 6/49, but eventually got to 49/49 after three hours.

Error with Catalyst software reports of (the age AMD) and only runs pilot generic VGA.

When tried to update the driver PC gets stuck in the new cycle of rebooting.

If uninstalling driver update (F8, last known good configuration) that's the generic VGA driver running.

The thoughts if it is hardware or software related?

(Windows 7, 64-bit)

> Any thoughts if this is hardware or software related?

In my opinion its hardware problem.
Eventually he s a graphics card problem.

Usually the laptop should work correctly after or during the process of recovery if it s not the case, then basically a hardware problem is the troublemaker

Tags: Toshiba

Similar Questions

  • Satellite A300-1GC - turn off when I play games

    Hello

    I try to explain my problem (I'll try because English isn't my motherlanguage wull so hards to ensure that you understand me Hi!).
    Usually I use my Satellite A300-1GC also for two or three days (I watch divx on tv and other small applications, but nothing special) and never happened to me that yesterday was happing!

    I installed a game (Jekyll & Hyde) and I played it with the pc cable hook up to electricity. After a while (I think only an hour) the computer turns off! After that was not possibel to turn it on nothing! No light was on the same battery icon nothing complitely dead! After about 10 minutes instead of the icons light was on and so I was able to restart the computer. Windows XP doesn't give me any error on the "blackout" reports the system. I restarted the game and play with him for about two hours without any problem! If you have something (hihihihi) understud my question is:

    Whay you do that I can do so that this accident will not happen more? Is there some test or newspaper or something similar I can read to see if there is any hardware/software problems? May need a BIOS update? I mean, is there anyone who have the same laptop and have similar experience and sort it out with an update?
    On short time I'm planing to install windows 7 (two DVDs I received from Toshiba) but first I must address this problem.

    I thank the of in advance for help
    Helen

    PS: Once again at 11:36 the laptop shut down whenm I played :(

    Hi Helen_1,

    Usually, if the laptop shuts down during a game, it s caused by a higher internal temperature to protect the equipment.

    I put t know how long you already have Satellite A300, but usually the laptop must be cleaned every 3 months using a jet of compressed air. You will find here in the forum how an article on this subject:
    [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

    Also make sure that this new Toshiba Web site display driver is installed.

  • Satellite Pro 6100 turns off when I connect the power adapter

    Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
    Any ideas would be appreciated

    see you soon

    Hello

    You use original Toshiba AC/DC adapter or another?
    What happens if you connect the AC/DC adapter, while the laptop is turned off?

    It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself

  • Re: Satellite L300 - screen turn off when it will be moved

    I have a problem with my screen stopping when I move my laptop or move the screen slightly. The computer does not turn off just the screen becomes black. I have to then hold the power button to turn off the computer.

    Does anyone has any ideas or had this problem?

    Hi Geg,

    You may notice this behavior on external monitor too?

    For me, this looks like a hardware malfunction caused by internal display or just the cable. You should ask a technician for laptop help.

    If only the cable must be replaced cheap s and takes a few minutes a technician for laptop.

  • Qosmio screen X 875-black q7380 when installing graphics driver intel hd 4000

    Hello

    I have a qosmio toshiba X 875-q7380 when starting Windows 8 screen was black and never started so I decided to move to W7, the installation has functioned well until I have install the display driver intel, then the screen is black and will not start.

    If I press F8 and failsafe mode works well, I would uninstall the Intel graphics HD4000 card driver and then start normally.

    Is there a solution to this problem?
    Thank you very much

    Post edited by: yop787

    Hello

    > .when from Windows 8 screen was black and never started

    The Toshiba Qosmio X 875 - Q7380 has been pre-installed and configured with Win 8 OS.
    The laptop should run correctly using the factory settings which means that the use of Win 8 should not be a problem.

    Intel HD graphics unit is part of the CPU. I m not very well, but I guess that the issue could be due to hardware problem CPU.

    Of course this is only my personal opinion, but I think that in cases where the laptop does not work using the factory settings, malfunction of the equipment is possible.

  • Satellite 2430-S255 turns off during playback of video clips

    My laptop Toshiba Satellite 2430-s255 turns off 5 minutes every time I play streaming video clips to web sites using Windows Media Player version 10.0. I have uninstall the version 10 and used version 9, but there is no difference. Computer has 512 meg of memory and 10 GB of additional space on the hard drive.

    There is no problem when I play DVD using the same software.

    Toshiba support has been telling me that cpu is working hard and it heats up because of this problem. I used the fan to circulate the air, but the computer still shuts off.

    Can help.

    Christiane

    HI Fanny,.

    Any graphic activity will tend to make your laptop run more hot and therefore sufficient cooling.

    Make sure that your airway through the CPU radiator is not clogged with dust and debris (a lot of discussions in this forum about this) and also ensure that there is sufficient air under your laptop knife get in the fan air vents.

    HTH

  • My Satellite L555-L11 turns off suddenly very

    Hello
    My satellite L555 L11 turns off very suddenly. It seems that it s because of the heat, as when it arrives, I put my hand under the laptop and feel a too high temperature.
    my laptop is 5 years
    What should I do?
    thx for you answer

    I think your laptop is quite full of dust and I can imagine that cooling rack is blocked so that your laptop is unable to catch his breath.

    Believe me, that cleaning can help. Best thing you can do is professional cleaning. In this case the laptop must be disassembled. Otherwise, you can buy compressed air and try to clean it.

  • Satellite A110 ranging power off when it is hot

    My Satellite A110 is always turned off when it's hot.

    What is the problem? Mayby fan? Can I change this?

    Hello!

    You hear a fan noise?

    Maybe you should clean the laptop. For this, you can use compressed air jet and could blow the dust from the fan. You n t have to disassemble anything.

    And try to find out if the fan works.

    Good bye

  • IPhone 5 s screen does not turn off when it is plugged in to the charger.

    Hi all

    I use Iphone 5s from the last 4 months. Recently I came across this situation. Sometimes I see screen only turns off when its plugged into the charger. After a few hours of mobile will be turned off. Sometimes I manually press the power button to turn off the screen.

    Please let me know how to solve the problem.

    Kind regards

    Manju!

    Hello there, Manjunath K P!

    Thank you for joining the communities Support from Apple! Looks like you're having a problem getting the phone to automatic locking. I know that I want my iPhone did not stay when over and have the screen lock correctly. You can, of course, that your Auto-Lock is set up correctly. Your range of choice of automatic locking from 30 seconds to 5 minutes before locking the screen, or you can choose never so that it does not lock. To change the settings, tap the settings icon, click the general button. Tap the AutoLock option and choose your preference.

    If these steps do not work, and you still do not see the iPhone Autolock when you're in charge, you can go to settings > general > reset and then press reset all settings. This removes all the data. For example, if you have 16GB of music, videos and photos, this option will not remove. What this does is actually reset some of your settings to factory default. It is not a complete withdrawal of the parameters. It deletes all of your preferences for Wi - Fi, Bluetooth, do not disturb, Notifications, general, sounds, brightness & wallpaper and privacy.

    Once that is done, go ahead and try to set the automatic lock again and see if it works.

    See you soon!

  • Satellite A60-122 turns off immediately

    Hi there, my 2.5 year satellite SA60-122 turns off no aparent reason.
    Sometimes after 10 minutes and sometimes after 3 hours.

    Why o why?

    Does anyone have an idea?

    Thnx a lot.

    Edwin

    Hello

    you are somewhat familiar with computers? If not, I suggest you bring your machine to a local service partner (http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?subs=tais)
    If Yes, then firstly make a few hardwaretests. You can make them with tools like "Memtest86" for memory or "Prime95" for CPU and RAM.
    This software is on a windows live cd for computer-maintenance as the UBCD4Win (Ultimate Boot CD for Windows) which contains a lot of useful tools and diagnostic programs.
    Here´s a link:
    www.UBCD4Win.com

    Other means can be:
    Clean the CPU fan, try to remove the RAM (maybe), maybe the power adapter is defective or maybe the battery.
    It s a little more difficult to find these things, but often it s really good to use this live-cd-system and check the system.

    So, try it (or not :)) and give some information about what happened, maybe to give more detailed information about the behavior of the machine.)

    Welcome them

  • iPAQ turns off when taken off the coast of the Office docking station

    My hp iPAQ PDA (model 4155) began to turn off when I take it off the cradle of office.  I don't see any options or settings to correct this.  Please notify.

    Sounds to me like the battery takes is no longer a burden.  You can probably find a new battery for your iPaq by searching on the internet.

  • My computer it does not turn off when I go early and turn it off?

    My computer it does not turn off when I go early and turn it off? u can help me, please!

    Hello

    ·         What operating system do you use?

    ·         Did you do last changes made on your computer before the show?

    If you use Windows 7 or Windows vista, I suggest you to follow the steps in troubleshooting this article and check if that helps:

    You can't do a computer that runs Windows 7 stops or sleep

    http://support.Microsoft.com/kb/977307

    If you use Windows XP, see:

    You cannot log off, restart or shut down your Windows XP-based computer

    http://support.Microsoft.com/kb/831431

    See also:

    Turn off a computer: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/turn-off-a-computer-frequently-asked-questions

  • Canon powershot s100 turns off when I turn it on

    WHY IS MY POWERSHOT S100 CAMERA TURN OFF WHEN I TURN IT ON... I PRESS THE BUTTON... BUT IMMEDIATELY PUT OUT... AND EXTENDED THE STAY OF THE LENS... THX, BILLIE

    Yes, that's what I have... I used my battery and the camera turns on... so, not my camera... Good!... it's the AC adapter kit... do not get the connection somehow... I have the kit that has been recommended for my camera... I'll try another Coupler... I think that's my problem... do not establish a connection. I'm already supposed to have the right pair... But? who knows?

    Thank you for your interest and help to... Thank you very much.. Just going to try an another Coupler... S100

  • Monitor not turns off when I close the lid!

    I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

    I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

    This is probably controlled by the power settings. Once you enter the power settings there should be an option something similar to 'change the closure of the hood '. There are probably several options such as sleeping, ect...

    You can download the manual in PDF HERE.

  • HP 15-r011na: laptop turns off when it is attached cable ca

    Hi, I recently picked up the upgrade of Windows 10 and since then have had problems with the laptop switching power, do not know if it is related to Windows 10 but seems a coincidence!  When I got close I use the power on the screen completely closes the button and the laptop.  When I turn it on it's ok, if I have the AC cable disconnected (i.e. using battery power) but if I have the AC cable the screen goes off, but then goes black and seems to have turned off again, and I have to press the power button to put on the.  Also, if I connect the cable so that the laptop is on it goes black immediately, and if I delete it the screen comes alive again.  Can someone tell me what's going on that I have no idea about these things, and it makes me absolutely crazy!  I would really appreciate some advice please.

    Hi @Greenjack67 ,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop 15-r011na HP TouchSmart and the laptop turns off when it is attached cable ca. Here is a link to test and calibrate your battery for Windows 10.

    Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

    Plug the power supply directly into a different wall outlet. Do not connect it a power strip, surge arrester, or secondary power source as this could cause and issue.

    You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

    Here is a document that shows how update the drivers that do not work correctly with Windows 10.

    I hope this helps.

    Thank you.

Maybe you are looking for