How the processor cores and RAM work?

Similar Questions

• The processor speed and RAM for Hyperion 11.1.2.3

  Hi all

  Can I know where I can get the information below:

  For example, we are 4 dev servers. Installation modules: Foundation, Essbase, FDM, ODI, Planning Reporting

  for 50 users, how can we calculate RAM, processor, processor speed how?

  Documents or articles as well.

  Thank you

  Mady

  Not wishing to be too dismissive but it's one of these "how long a piece of string fo do I need?' type questions."

  The memory & processors will depend on the size and complexity of the applications/cubes resulting.

  As Essbase is always subject to a single processor by cube of pork, it is best to go for high speeds (3 Ghz +) processor more quanity of carrots for an essbase server.

  As a rough starting point I would usually put up on about 4 servers each at least 16 GB of RAM and 4 cores of each. However, you can get everything on a single server if he;'s spec is good enough and your cargo will be light (dev purposes).

  If the app is great, or reports strong he might need for more servers (Weblogic applications horizontal scale) or more of memory.

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• Why the processor info and his memory will not display on the properties of the computer.

  When I go into properties of the computer, the processor information and memory installed in not illustrated, the fields are empty or say no information available.   How can I fix it?   I can see the processor information using Device Manager.

  In addition, SYSTEM side is not displayed but I see when I select the tools and performance information.

  The computer seems to work fine otherwise, I just want to know how and why the information is not seen in the System Properties screen.

  If the system is stable and functional, I don't think anything really to worry about.

• Is there a way to stop the countdown rehearsal before she goes off without open the alarm app and turning works?

  Is there a way to stop the countdown rehearsal before she goes off without open the alarm app and turning works? Basically, if I'm ready to get up and there are 4 minutes remaining on the countdown of repetition which is the fastest way to 'Cancel' the snooze and alarm?

  There isn't a way, I discovered that allows me to do without invoking the alarm and the alarm clearing application

• I have Firfox 18.0.1. On a single Web site my usercode and password entries are considered not valid. The same words and password work fine in IE and Google.

  On a single Web site my usercode and password entries are considered not valid. The same words and password work fine in IE and Google.

  I found that my Norton Toolbar had been disabled so I enabled it. When I tried the site it worked. Go figure.

• my external hd will not appear in my computer, it is in the device driver and says working ok

  my external hd will not appear in my computer.  It is in the device driver and work very well, and it shows in the hard drives and says working properly.      I turn it on then it is not in my pc so that I can usr it t / you rick * address email is removed from the privacy * or * address email is removed from the privacy *.

  Hello

  Check your drive in computer management. Click Start-> run, type &-> compmgmt.msc-> navigate to storage-> disk management.
  On the right side, make sure your external drive-> Rightclick and assign a drive letter.
  I hope this helps.

• Pavilion dm1: how the recovery 2 and 3 disc (dvd) to be bootable on USB?

  Hi, my drive hard computers have crasched so I decided to buy a new hard drive and also the recovery kit that comes as a dvd discs. But given that the computer have any dvd player I need to move the data from dvd-drive to a USB key. So I use another computer to 'move' the data between dvd and usb (I use powerISO program, to copy the data into the ISO and make it bootable on a USB key).  To make the USB bootable for the first disc is easy because it contains bootable files but I don't know how the dvd 2 and 3 to be initiated through the USB, they do not contain startup files. So I did not be longer when the recovery program stops and application disk 2. Any suggestions?

  I found a solution, and it's a simple.

  Just move all *.wim DVDs 2 and 3 files to the directory disk 1 on the USB stick PRELOAD. I also changed the information in info.dat and the SSRD.dat (place in the Repertory of PRELOAD) file to not understand anything of disc 2 or 3, if necessary, I do not know...

  Info.dat:

  BOOT

  SSRD.dat:

  NumberOfDiscs = 1
  SOURCE_ROOT = C:\RM\Image\
  UP_SIZE = 69631
  UP_OFFSET = 204800

  After that, it was only to start the computer, press ESC and select boot from a USB...

  * Note. The USB is made bootable for disk 1

• I need to upgrade the CPU, motherboard and RAM in my machine. Which will impact my Activation of Windows genuine?

  I need to upgrade the CPU, motherboard and Ram in my machine. Which will impact my Activation of Windows genuine?

  original title: can I put my machine after GWA?

  It's a Genuine Windows Kit which is what you would be considered a retail license. In other words, that it is transferable to another computer, which means you have the right to support directly from Microsoft.

• I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I fixed the old-fashioned way. Uninstall - reinstall. Works fine now.

• How to set the processor affinity and memory.

  We have explicit recommendations of our application provider to set the processor affinity for one of our virtual machines running their product. However, this process is not quite clear to me despite the available docs. We are company ESXi 5.1 more.

  By looking at the tab "resources" for the parameters of the virtual computer you see under CPU:

  Actions (I would do that quite high so that it never goes to confront other good?)

  Booking

  Limit

  The requirement is to set aside x cores for the virtual machine while it is never claim to waiting or resource. They would also potentially implement affinity memory related to the same socket for the effectiveness of the NUMA node.

  We have a host with 2 8-core processors with 256 GB of memory. I'm not worried about the affinity of memory. This should be as simple as the control that the 'reserve any memory comments' correct?

  Is it simpler just set up a pool of resources for cela CPU and memory? The only concern I have is it if the processor uses the same memory channels. We do not want a CPU into a socket using the channel memory of another plug for this virtual machine.

  And it's too late to go back to physics for this system.

  Eeghads! Just FYI, the processor affinity is almost never what a seller really wants, even if they think they do. I can imagine there are valid use cases, but I spoke with several vendors who recommend this, and they were all wrong.

  From what I understand in your summary, the application is sensitive to the latency of the CPU. If the physical compute capacity, actions and reservations will address the latency. Latency is the only reason why they want to set the affinity, or are there others? If there is other, know what they are, because there is a good chance to those who are also invalid reasons. The processor affinity tends to exacerbate the problems you're having with loans time CPU and can often cause latency application MORE CPU than that without it. Yes, you can set up reserves of CPU to address these issues for this particular virtual machine, but you made life more difficult for the CPU scheduler. DRS involved in the loan time CPU, which means she won't necessarily move these other virtual machines on this host, even if they are jointly stop like crazy. While we're on the subject, this virtual machine would need to be excluded from automatic DRS migration, since you cannot vMotion with the processor affinity configured. It also means the virtual machine must be powered whenever his current host goes into maintenance mode.

  In any case, verification 'reserve any memory comments' will not affect memory locality. Will just leave all the pages of virtual memory with physical memory pages (another side effect interesting is that creates the virtual machine is no longer a pagefile on the boot). If you REALLY have to set the affinity to the CPU/memory, memory affinity can be set by changing the settings of the VM, the tab "resources", select Advanced Memory, and you can configure NUMBER here. In addition, if you had already seen it, the processor affinity is configured in the tab "resources", under Advanced CPU.

  I highly recommend you challenge the seller and ask if reservations CPU are sufficient. The planner of UC is already aware NUMA. VCPUs how they ask, anyway? Unless they want to more than 8, it is unlikely to split the virtual machine.

• How to make my waveform in the simulation design and control work continuously?

  Hi all, I m a begineer to Labview and have a few question.

  I use the Labview to design and implement a controller for FOPTD system, but I found that the waveform in the 'loop control and simulation"does not work continuously. I mean keep repeating in the same graph from 0 to 10 seconds. Is there an approach to make it run continuously?

  Thank you very much.

  Whenever a loop Control Design and Simulation is executed, it connects a full simulation, the initial time for the last time. When you drop a new loop CD & Sim down, the default values are zero second initial time and 10 seconds for the last time. I guess what you probably want is for simulation do not stop at 10 seconds. Double-click the left node attached to the CD & Sim loop and extend the end time. You can change the end of 'Inf' time if you want it to run until the VI is stopped.

• How to get to each use of the processor core using the powershell cmdlets?

  Can get stat used to get all the cpu cores use separately?

  Thank you

  REDA

  Of course, the cmdlet Get-Stat can, in addition to the real time statistics, also retrieve the metrics for each of the 4 historical intervals.

  You who control with the - IntervalMins (or - IntervalSecs), the - Start and settings - finish.

  A few examples

  # Historical interval 1
  $stats = Get-Stat -Entity (Get-VMHost ) -Stat cpu.usage.average -IntervalMins 5 -Start (Get-Date).addhours(-6) -Finish (Get-Date).addhours(-5) -MaxSamples 12
  $stats | where {$_.Instance -ne ""} | %{
       Write-Host "Core" $_.Instance "avg" $_.Value
  }
  

  # Historical interval 4
  $stats = Get-Stat -Entity (Get-VMHost ) -Stat cpu.usage.average -IntervalMins 1440 -Start (Get-Date).adddays(-2) -Finish (Get-Date).adddays(-1) -MaxSamples 24
  $stats | where {$_.Instance -ne ""} | %{
       Write-Host "Core" $_.Instance "avg" $_.Value
  }
  

• HP Pavillion P6347c: Allow the processor cores

  This is the second time that I post this question, now with more information. I ran the HP Hardware Diagnostic and Test "Multicore" informed me that "only two of the four cores are enabled. How to activate the other two hearts? When I search the computer for the amount of available cores, it is said that two nuclei, yet all other research say that there are four cores of the processor. When checking with the Manager tasks two cores work. The processor is the AMD Athlon II X 4 630 processor. I checked in msconfig and still only 2 cores are available. Here, any help would be greatly appreciated.

  Hello

  Device Manager displays both physical and logical processors.

  Download CPU - Z to verify that you have actually 4 cores and 4 wires. The default CPU tab shows the number of hearts and son down.  This tools will flush out the inaccuracies with Windows may report errors.  This tool should "dispel" you.

• Upgrading a p6510f Pavilion with a new power supply, graphics card and RAM work?

  Well, here's the deal that I go back to Japan for about 3 months and during this time I will borrow my laptop Cousins (in Exchange for my office) for Skype etc.. No problem their the thing is that he is a player and this p6510f has a few bad specifications when it comes to this, so I thought that I could let him borrow some cake rather than dirt, if you catch my drift ha... As well, when I get back gamer I ~ ('voice of Yoda"aka How Japanese works...)

  So I looked on Newegg / Amazon read comments and planned my purchase but the question is can this case and the Board of Directors manage what I use? lazy to measure everything out / busy.

  So first thing, I would like to replace:

  Replace the 2 x 2 GB ram cards default with:

  4 x Corsair blue Vengeance 4 GB (2 X 4 GB) 1600 mHz PC3-12800 DDR3 SDRAM of 240 pins

  For a total of ram 16 GB with my x 64 bit PC of course

  Link: http://AMZN.to/KtMt9m (note that I buy two)

  Replacing power 250w with an overkill rather one but it is the same price as a 550w then why not eh? After all the future upgrade/ability to use it in future builds?

  1 x Corsair Enthusiast Series 650 watts 80 Plus Bronze Certified Power Supply Compatible with Intel Core i3, i5, i7 and AMD platforms

  For the graphics card + overclocking.

  Link: http://AMZN.to/IkLTdp 

  Finally no more ATI integrated BS... Please for the love of the creator (will it work?)

  1 x EVGA GeForce GTX 580 1536 MB GDDR5 PCI-Express 2.0 2DVI/Mini-HDMI SLI

  If my PC can adapt to this card, and it works with power above that will make me happy enough. (Regarding the cooling if it becomes a problem, I can upgrade fans me but first comes this material.)

  Link: http://AMZN.to/IFiEa2

  I checked the slot for graphics card, RAM and power supply power and it seems to me that this will work out I want just a professional opinion...

  -----------------------------------------------

  Card not present upgraded

  HP Pavilion p6510f PC / Nr WW639AA #ABA

  Four cores AMD Athlon 630

  4 GB Ram DDR3

  HARD DRIVE 750 GB

  Integrated ATI Radeon graphics card...

  Power Max Power 250W

  Windows 7 Home Premium 64-bit

  -----------------------------------------------

  Thank you! ~ Of Amerindian

  Hello

  According to Corsair, the DIMMs that you chose is detected only at 1600 mhz, which is not in the specifications published by HP.

  You can roll the dice on the DIMMs that you chose, but I wouldn't recommend that buy you them until you contact Corsair and get a confirmation.  Computers HP can be very finicky with DIMMs, especially if you try to mix them with other DIMM modules.  If you do buy these bars and want to be them mixed with the existing DIMMs, then make sure the timings of latency CASE corresponding information validated HP. Also mix DIMM sizes will cause the memory function in unbalanced mode that adversely affect the performance of the memory.

  You should be able to make your own decision on whether to roll the dice.