AF:messages only for the Type INFORMATION

Similar Questions

• "Sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you. "windows 8

  Hi so I recently bought a new computer and out of no where he worked in some really annoying errors. This has happened three times, I can't understand a reason yet, AFAIK, it occurs randomly. A few times I start up my computer and it starts just the windows icon, the loading circle is not displayed. If I let it run it will remain still frozen. After a few reboots, he says still 'preparation auto repair' is still frozen. This has happened 3 times.

  The first time I have not jumped into the recovery CD, no problem, used a system restore, it was all good.

  The second time, she actually had a cause, our power went out and my pc was used, then maybe he could have ruined a circuit. So I put the CD, it wouldn't recognize it and if he did, he would freeze just and nothing to do. I tried F8, F12 and F1: he didn't even recognize these keys or react at least based on them.
  After a few restarts I miraculously managed to do recognize the CD and this time I made a cooling system.
  This lead me to think it might be some of my files/programs, but I'm still working on acquiring them all back after the update so I think it is unlikely that. 3rd time: yet once, it happened when I turned it on after a normal closed. It would not recognize the cd or the keys. After maybe 15 attempts, but rather oddly, everything was OK? I also noticed that my Tablet Wacom Intuos 5 is connected it will not start, but if I unplug it, it starts very well. (Driver error?)

  All this is fine and dandy, I can deal with it, but not until recently that error in the title stood. I noticed, that it normally occurs when the computer is in "sleep" or the monitor turns off because it is inactive. If I move the mouse to bring on the monitor, it is just a bright blue solid then the following message: "sorry, your computer has encountered an error and needs to restart. We are only collecting the error information, and then we'll restart for you"appears and it stops. Whenever this happens, it starts up just fine, it is just annoying it encounters this error whenever I use it. I tried to do system recoveries, but it did not help. I can just do a reset or refreshment, but again once I do not want this effort and to lose files if the error is still going to happen. I'm not sure if this is a hardware error, heating, maybe? But I'm not all that experience in these things. As I said, this computer is fairly new, maybe 2 months, then maybe I could just put its warranty policy to use. But if you can think of anyway to help, it would be great thanks!

  My specs are:
  Avatar
  CPU: AMD FX Processor with Six cores (tm)-6100 3.30 GHz
  GPU: Geforce GT 640

  16.0 GB
  operating system 64-bit, x 64 processor
  Windows 8.1

  Hi Kaelie,

  This issue seems to be with the material. As you mentioned that your computer is under warranty. It would be better if you contact the manufacturer of your computer for help on this issue.

  Just reply to us if you are having problems with Windows in the future. We will be happy to help you.

• Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.

  Why do I get a blue screen that says your PC is encountered a problem and needs to restart. We are only collecting the error information and then it will reboot for you.

  https://www.dropbox.com/s/2dtm74f6ki7goa4/minidump.zip

  DAG

  These were related to your driver atheros wifi athw8x.sys I would like to re - install the latest driver available.

  If you continue to plant I remove Symantec and use the built in Defender

• Security filters for the Types of Plan of ASO in 11.1.2.3

  
  All,

  My understanding of security filters for the Types of Plan of ASO in 11.1.2.3, is that they are not as robust as Types of Plan of traditional BSO are. Is this true? If so, can I restrict access to users who are assigned to the ASO Plan Type to display only and read/write on the private accounts and entities (for example)?

  Thanks in advance.

  The limitation that you refer is a bit confusing.  In summary, the planning will not create Essbase security filters on a data base of the ASO.  However, this does NOT mean that you will not have security on the Type of Plan of ASO.  Instead, it depends on which tool you are using to access the Type of Plan of ASO.

  If you want to connect to the ASO Plan type planning or tool (e.g., EN) with a connection to planning, you'll be fine.  The planning gets its security filters Essbase security information.  It gets its information from the relational repository security.  So the planning and the EN (with a connection to planning) are supported.  Security works as you would expect, even for the Type of Plan of ASO.

  If you want to connect on the type of Plan of ASO with something that requires a * Essbase * (not planning) connection, it only is not supported out-of-the-box, because planning will not create filters on the ASO cube (at least not yet in this version).  However, there is nothing that prevents you from creating filters on your own.  I usually manage all of my safety in an Excel/VBA model that allows me to export/import the Essbase security planning and.  This allows me to apply specific to Essbase filters after a refresh (by importing the custom filters via MaxL).

  So the question is... what tool you will use to access the Type of Plan of ASO?  If you use a connection of planning, you're good.  If you use a connection of Essbase, should be a personalized approach.

  Hope this helps,

  -Jake

• How to create a validation only for the lines that are created in a table

  Hi all
  
  I have a simple question. Is it possible to create a validation in a table that fires only for created?
  
  There is a possibility at the APEX 4.1 choose two types of "* execution scope *" is first of all ' * created and updated lines * "and the second is" * all subject lines. "
  
  Thanks in advance!
  
  Kind regards
  
  Jiri

  Hello Jiri,

  > Is it possible to create a validation in a table that fires only for created?

  You can still use the field lines created and updated the and use a PL/SQL Expression condition of:

  :APEX$ROW_STATUS = 'C'
  

  You will also need to change the Condition run for each line.

  It will be useful,
  Arie.

  -------------------------------------------------------
  Be sure to mark the appropriate fix/useful messages. For the long term, it will benefit us all.

• Satellite 4090 BIOS number - message "ready for the update BIOS... ' appears

  Hi all! Excuse my poor English because I'm french.

  A friend gives me his cell phone (a Satellite exactly 4090CDS) because he had a problem.
  In fact, the problem is that when I turn on the computer, I have a single message (not even the toshiba red logo) that is "ready for the update of the BIOS. Place the BIOS update floppy in the drive and press any key when you are ready to move forward."

  So I go to the french site of toshiba, in the BIOS download, I find that I must download this update: http://support.toshiba-tro.de/tools/bios/satellite/4030-4060-100/bios_820.zip

  OK, I download and unpack it on a floppy disk and I start the laptop with the disjette, he said that the update has been successful and it restarts automatically.
  This time, the Red toshiba logo appears, but then I have a black screen with a message:

  Bad checksum (CMOS) *.
  Check the system. Then press the [F1] key.

  And after that, I can't do anything, not even, press F1. If I restart the laptop, I myself meet once more with the first message «Ready for the update of the BIOS...» "and it's still the same.

  If someone could help me understand what the problem is, that would be fine.
  Thank you.

  Bastien.

  It sounds as if your CMOS chip has a problem. It is possible to s that the CMOS battery has failed and the BIOS settings are lost.
  Maybe the RTC battery is empty. In this case, you should connect the AC adapter to charge the battery of the CCF.
  Please note that the RTC battery (CMOS battery) can be fluffed once the main laptop battery has been recharged. In this case, the charge process may take several hours.

  But if after this long process of load this message appears again then I guess the battery is dead.
  I suggest that you only contact your ASP closest to get your phone checked.

• When I defragment I get message "suspended for the shadow copy of volume.

  Original title: Defrag problem

  When I defragment I get message 'suspended for the shadow copy of volume' whatever that means?

  The VSS Service should not be run unless you do some kind of a backup that uses it.

  Are you using any kind of third-party backup software that would force the VSS Service to run all the time?

  If defrag used to work, what do you think might have changed since the last time it worked correctly?

  I have my VSS Service set to "Manual" - in this way, it not start with XP on a restart and run all day to do nothing, but he will start by itself when I do a backup and stop when the backup is complete (it runs when you need).

  You check the VSS Service, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services applet and find the Volume Shadow Copy Service.

  Select the status and Startup Type columns.

  If you do not have a backup at this time there, the Status column must be empty (not started) and the Startup Type should be set to manual.

  If this is not the case, let a right-click on the VSS Service, properties, Stop (to stop it), change the Startup Type to manual and OK your way out (ensure that it is reactivated by itself).  If it starts up again without a valid reason, you need to understand why and fix it.  Restart to make sure the changes 'stick '.

  See if your defragmentation works when the VSS Service does not work...

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• Value to be entered when filling out the metadata for the type of Version in Plannin

  Hello
  I extracted the dimension of the version of my plan.
  Now I need to push planning 11. I reversed the planning 7 dimension by using the dimension of the version to push the value.
  
  After the excerpt, the type of version is UDA as 'Standard bottom-up, Public '. I divided the chain into 2 columns in the version type and others such as the UDA.
  I traced the type column version to the source to version type (in planning) to the target.
  
  The performance of the interface, it generated the following error log:
  
  Final Version, Version, never share, Public, Standard Bottom Up, ~, cannot load the dimension member, error message is: java.lang.IllegalArgumentException: invalid value for the Version Type field: Standard Bottom Up.
  REV 1, Version, never share, Release 1, Public, Standard Bottom Up, ~, cannot load the dimension member, error message is: java.lang.IllegalArgumentException: invalid value for the Version Type field: Standard Bottom Up
  
  What value must be entered for the type of version?
  
  Furthermore, if there is no doc/pdf that provide details on the different values that can appear in the dimensions of planning, please share.
  
  Thanks in advance
  
  Published by: user8628169 on January 18, 2010 16:40

  Hello

  The value should be 'Bottom Up' or 'Target', have a read here for properties

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Will that be HP motherboard compatible with RAM only for the card mother amd?

  Hello

  I have Compaq 510 with motherboard HP

  I want to upgrade from 2 GB to 4 GB

  I only compatible DDR2 Ram only for the AMD motherboard

  my laptop that will run RAM?

  I don't want to lose my money to buy an another RAM

  thankss...

  Sorry for my bad English

  You must ask to HP/Compaq.

• I just bought the 14 items and I don't see the download button. only for the operating system of the ILO. Help, please.

  I just bought the 14 items and I don't see the download button. only for the operating system of the ILO. Help, please.

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If he continues to not try to use a different browser.

  Download and Installation Help-

  https://helpx.Adobe.com/download-install.html

  PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  PE 10, 11, 12, 13, 14 - https://helpx.adobe.com/premiere-elements/kb/premiere-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html

• How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  Hello Jmbtexas4,

  By default, you will need to individually click on the fields of the form and check the 'read only' and save it. From now on, it is not possible to select all together and make the changes.

  -Usman

• Hi, I installed Windows 10 on my II Surface Pro today and I lost my ADobe Acrobat program, installed, but it took a key no. from a previous version. My no. is only for the update to Acrobat XI. Thank you

  Hi, I installed Windows 10 on my II Surface Pro today and I lost my ADobe Acrobat program, installed, but it took a key no. from a previous version. My no. is only for the update to Acrobat XI. Thank you

  Hey Samy,

  Please read: error: "this serial number is not for a product calling it" | CS6 cs5, CS5.5,

  Hope that helps!

  Kind regards

  Sheena

• I just started my creative cloud subscription and in artificial intelligence, I try to convert the text to outlines text, but only in the type of command is not active! can someone tell me why? and what should I do to activate it? I use in windows 8

  I just started my creative cloud subscription and in artificial intelligence, I try to convert the text to outlines text, but only in the type of command is not active! can someone tell me why? and what should I do to activate it? I use in windows 8

  Abdel,

  What font you vectorize?

  Or is happening with all your fonts?

• Are the five sites of free creative cloud only for the test?

  Are the five sites of free creative cloud only for the test?

  Hello

  No, you can add your own domain name to these sites and use them like any other normal site. Let me know if you have any specific doubt, and I will try to answer,