afeter signing key, I can't deploy ap on device

Similar Questions

• Linked my token BBID signing keys and now I can't deploy on the device

  Finally tied my token BBID to my old signature keys, curiously, now whenever I have add a device or try to deploy one it looks like for the device, validate test the password but then said that it couldn't connect.  I tried to restart the computer, deleting and creating a debugging token, I tried to restart the testing devices as well.

  Nothing seems to work.

  Is there anything else I can try that I didn't think?

  I could solve the problem by removing and reinstalling Momentics. Not sure as to why this happened in the first place, but at least it has set.

• What determines the size of the rsa keys that can be generated on a device?

  According to this pdf:

  http://www.Cisco.com/c/en/us/TD/docs/iOS-XML/iOS/security/A1/sec-A1-XE-3...

  It seems to me that any device running a before image of Cisco IOS version 15.1 (1) T was able to create a key size of 2048 and any device that is running the image above and those who subsequently would be able to create keys of 4 096

  Am I right in saying this. I know it's a bit obscure question where the reason why I am struggling to find an answer to this. Any help much appreciated. TIA

  Yes - this is confirmed in the Release Notes for IOS 15.1 (1) T.

  (ASA, Wireless controllers etc.) non - IOS devices will have their own dependencies of liberation.

  Also - note for some trains of release of IOS 12.x improvements were released after IOS 15.1 (1) T, so those could also have benefits from the support of 4096 bits.

• How can I block my keyboard so when my cat button, the keys perform the functions? I have a lock on my computer so I need a password to sign, but I can't find any info on how to lock keyboard features in.

  How can I block my keyboard so when my cat button, the keys perform the functions? I have a lock on my computer so I need a password to sign, but I can't find any info on how to lock keyboard features in.

  A quick Google for "lock keyboard" raised a certain links that seem promising. Here's one of eHow that answers your questions to kitty:

  http://www.ehow.com/how_4925264_lock-keyboard.html MS - MVP - Elephant Boy computers - don't panic!

• Code signing keys can be used on more than a developer (different PC)?

  Hello

  I applied for a set of code a long time ago signing keys.

  I installed them on the JDE on my computer... and I was able to migrate them to my new computer always on the JDE, then on the eJDE thereafter.  I had a few problems of migration of these keys, but everything is working well now, I am able to sign my application.

  Now, I have a colleague who wants to develop an application using Widgets and there need code signing keys as well.  Can I just send my key itself?  Or he must apply to his own set of keys?

  In other words, the code signing keys used to identify a company or developer?

  Thank you!

  Each developer must have their own set of BlackBerry Code signing keys.  Sharing the key is against the license agreement.

• Back up signing keys

  I would like to reformat my computer. How can I save my BB signing keys so I can write it again later?

  Check out it:

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/backup-and-restore-BlackBerry-code-SIG...

  Also follow this doc:

  https://developer.BlackBerry.com/native/documentation/com.QNX.doc.native_sdk.DevGuide/com.QNX.doc.na...

• New signing keys

  Hey guys

  Thank you for your support, the last time I had questions.

  I have developed many applications PlayBook with WebWorks.

  Today, I wanted to get one of them running on my DevAlpha camera.

  I had the same problem as this guy here:

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/ripple-deploy-to-BB10-dev-Alpha-failur...

  Here's my output terminal:

  Building:

  1. [INFO] The application of filling source
  2. [INFO] The analysis of config.xml
  3. [WARNING] Build ID is defined in the file config.xml [version], but no signature password was provided [-g]. Bar will be unsigned
  4. [INFO] Generation of output files
  5. [WARNING] Cannot find the debugging token
  6. [INFO] Info: Package created: /.../simulatorArchiv 2 bar.
  7. [WARNING] Cannot find the debugging token
  8. [INFO] Info: Package created: /.../device/Archiv 2 bar.
  9. [INFO] BAR complete packaging

  Installation:

  1. Info: Send request: install and launch
  2. Info: Action: install and launch
  3. Info: File size: 311765
  4. Info: Installing undefined.testDev_undefined__c21f6150...
  5. Info: Treatment 311765 bytes
  6. actual_dname:
  7. actual_id:
  8. actual_version:
  9. result::failure 881 the application author does not match the author token of debugging

  I ordered new signing keys because mine were only for PlayBook and I needed for BB10.

  Then I started GraphicalAid, implemented the last SDK to WebWorks BB10 as 'BlackBerry WebWorks SDK location' and click "Start the Configuration Wizard".

  On the last step, I was able to click on "Register New Keys".

  Here comes the problem.

  Luckily the program told me this:

  "(!) ATTENTION: this action will cancel the registration of that computer, making it impossible to sign applications.  To continue signing applications and the creation of debugging tokens, you must re-enroll to the: http://www.blackberry.com/go/codesigning after re-registration, new versions of your applications appear as new applications, not upgrades, and will not have access to shared data from previous versions.  Are you sure you want to delete your current keys? »

  Now, I want to be able to get the BB10 apps running but I also want to be able to release future updates of my PlayBook applications. If updates recognized as new apps I can't use them as updates.

  So I have not deleted my key of course, but now I can't test stuff on my DevAlpha using my DebugToken.

  I thought it might be because I used BlackBerry Tablet OS graphical help but I don't know too much about.

  Any suggestion guys?

  Please help me.

  Flo

  
  

• Problem signing key with Chrome Ripple when installing on my Alpha BB10 device

  The signing keys created since Blackberry 10 native SDK Eclipse plugin can also be used to sign applications Webworks HTML 5 under construction of Goggle Chrome Ripple Extension?

  My directory "C:\Users\dev\AppData\Local\Research In Motion" seems to have the files: author.p12, barsigner.csk... etc. But when trying to install on my 'device BB10 Dev Alpha', the server of the ripple is spewing what follows:

  Build completed, now deploy
  ...

  Info: Send request: install and launch
  Info: Action: install and launch

  ...

  actual_id:
  actual_version:
  result::failure 881 missing signatures

  Problem I think was that I had no "Enable Remote Web Inspector" checked and maybe even used the wrong PIN number (confused 0 o) and 8B.

• Move the Code signing keys

  Hello everyone

  Is there a way to switch between PCs of signature key code?

  Thank you

  You can back up your keys and restore the same or another PC.  Steps can be found here.

  Backup and restore BlackBerry Code signing keys

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/backup-and-restore-BlackBerry-code-SIG...

• Can not deploy the build Q10

  Hello. I have difficulties deploying my build for a physical device. It seems to work fine on the Simulator. It is a port from files apk android to a bar file.

  None of these debugging info below seems familiar? No idea why it does not work?

  Thank you

  Kenneth

  Env:

  10.9.2 MacOSX

  Customer 1.1.0.20 | Mix 1.1.0.67

  Command line tools: 2.0.6.201409181326

  feature:

  Q30

  version s/w 10.3.2.2474

  OS: 10.3.2.2639

  Build ID: 857461

  What I tried:

  1 using the BlackBerry deployment tool, I get the error message:

  Error: Failed authentication user
  com.qnx.bbt.deploy.Deploy$ DeployException: error: failed authentication user

  2. via command line tools

  $. / blackberry-deploy - v - installApp-password 1111 - device 169.254.0.1 - package androidapp.bar
  Info: Initialized http client
  Info: Attempt to leave with cookie
  Info: Logging in...
  Info: Response analysis...
  Info: Status of reading...
  Info: Status: success
  Info: Application-Development-Mode is set to false, off sync
  Info: By running the command INSTALL
  Info: Send request: INSTALL
  News: Expired session reset

  A debugging token is not required for the loading of a signed version.  Restart the Q10 help?  You can try deployment WiFi instead of USB?  If it works, try to install the latest version of BlackBerry Link, that will update the USB drivers.

• Loading in Eclipse signing keys

  I received my two SJC files for signature by e-mail. Eclipse asks a .zip file when you request the signing keys. I checked the docs and I can't find information on how to create this .zip file or what steps I have to take after receiving the email. I followed the link to the help key signature page, but there seems to be no section for the native SDK.

  What should I do after receiving the SJC files?

  Thank you
  Scott

  These temporary files in order to activate your account, after activation, you can throw away them.

  To activate start IDE, go α fenΩtre-> preferences-> BlackBerry Tablet OS->

  Then click on the link that activates the wizard. Follow the wizard, asked about the signature

  the option key

  "You have not been saved...". »

  It will prompt for the CSJ files and create all the necessary things.

• Lost signing keys

  I have a question, I have published several versions of a product... I lose my sigtool files so I asked new code signing files, I have already installed the new keys, so I would like to know if is there any problem if I register my files with this new key at the time release a new version of the product?

  Thanks in advance!

  If it is an application BBOS, you can sign the new version with keys no problem different code signing.  Code signing keys should remain the same for BlackBerry 10 applications.

  Also note that [email protected] is no longer controlled.

• I forgot the password of the Code signing key

  Hi, I got the signature key (csk file) by registering on blackberry, but for some reason, I forgot my password... When I try to sign my code it ask me password... I googled a lot to find a way to recover my password, but no avail... Can someone please tell me how to recover my password for the key signature or any other way that i can reset my password... Any kind of help would be appreciated... Thanks in advance...

  This is an old thread... but since it's one of the first results in a Google search, I wanted to bring an answer here.

  It is not possible to recover your password for BlackBerry Code signing keys.  However, you can choose a new if you reinstall your keys.  The first thing you need to do is to order a new set of keys (free) using the form below.

  https://www.BlackBerry.com/SignedKeys/

  Before installing your keys, find and delete the files below that will be present in the various BlackBerry development tools installation directories (location varies by tool).

  sigtool.DB

  sigtool. CSK

  sigtool. Set

  You will now be able to install your new CSI files and choose a new password.

• Sign keys issue or rule?

  Hello. I have question? I bought sign keys and install them in JDE 4.2.1 and all is well. When I tried to use the same keys for JDE 4.1.0 then I was unable to use files: sigtool.csk, sigtool.db, sigtool.set to sign my application, why? Also for more advanced JDE I'll be able to use these keys, or just for specific JDE in virtue of what I install?

  Thank you.

  Hi all I found the Solution.

  Go to your \bin folder of the version of the JDE who you can connect (by default: C:\Program Research In Motion\BlackBerry JDE 4.2.1\bin) and COPY files the 4 following four:
  -sigtool.db
  -sigtool.set
  -sigtool.csk
  -SignatureTool.jar

  If you could navigate to the \bin folder of the version of the JDE, you want to be a signing, but do not proceed and PASTE the files there (by default: C:\Program Research In Motion\BlackBerry JDE 4.1.0\bin), you should be able to copy your signing privileges. This process can be performed for several versions of the JDE, as well as the Eclipse plugin eJDE.

  Enjoy.

• Limit BlackBerry code signing keys

  The same set of customer files - RDK.csj and customer - PBDT.csj is usable on multiple computers to create the device debugging token?

  The CSJ files themselves can be installed once.  But after they have been installed, you can save your code signing keys and restore them on multiple computers.  See the link below for more information.

  Backup and restore BlackBerry Code signing keys