After 30 seconds of playback AVCHD m2ts to xbox 360 extender stutter starts, mfpmp goes to 100% on Windows 7 host computer.

Similar Questions

• How can I change regional settings after connection Wi - Fi was made on my xbox 360

  How can I change the locale of my xbox 360 after connection Wi - Fi has been made

  Hello

  You can check the link:

  How to set up your Xbox 360 console locale

  http://support.Microsoft.com/kb/906497

  Note You can't change your regional settings, if you have enabled the family settings feature. The language setting is integrated with the family settings feature and wireless network settings. Change the regional settings can change the wireless network settings. We recommend that you do not change the regional settings after you set up your wireless network.

  If you encounter problems after you change the regional settings, you can contact your ISP for assistance.

  Hope the information is useful.

• Film shot in Windows Movie Maker crashes after 6 seconds during playback in Windows Media Player

  I have a film created (1 minute, 20 seconds) in Windows Movie Maker of two short videos to YouTube.  The original files were .mp4 files and I converted the .wmv files.  I cut 7 seconds since the start of the first video and just linked the two original videos into one.  No special effects.  Plays well in Windows Movie Maker.  Save the file as an .mswmm file (required by Movie Maker) and then published as a .wmv.  When I play it in Windows Media Player, he plays for 6 seconds, then freezes, but the bottom bar is moving, as if he is playing.  I tried to do the same thing without clipping 7 seconds from the beginning - same result.  I used WINFF (free Converter).  Any ideas?  Thanks for your help.

  Hello RachelPierce,

  1. what happens when you try to play the files with Windows Movie Maker?

  This problem can be caused by codecs supporting not the file that you created. If you use a converter, I suggest that you convert the files to MPEG format and verify if you are able to play the files.

  Thank you
  Irfan H, Engineer Support Microsoft Answers

• Still under menu stops after 15 seconds during playback of DVD

  Hello

  I built a DVD with a menu SUP to 6 scenes of the templete Rose.  I did the rollovers. When I go through in the overview, the movement keys repeat. When I play the DVD I have about 15 seconds to choose a scene or DVD goes to the home screen (not the main menu root) as when first put you the DVD in.

  I put the end action for the menu to stop, a link to here and return to the menu. Whenever I burned a DVD new but had the same problem. I know it must be something simple that I'm doing wrong... I hope! But can anyone give me an idea?

  Thank you

  Art

  Screenshots are good!

  Post a screenshot of each menu with properties tab and tabs of the motion. (4 screenshots)

  One of your chapters have stock of end? (they shouldn't)

• Xbox 360 Windows Media Center Extender does not connect after upgrade to Windows 7

  Xbox 360 Extender worked fine on Vista Home Premium (32 bit). After the upgrade Windows 7 Home Premium (32 bit) on-site, when I turn on Xbox and the attempt to connect to Windows Media Center, you get an error saying unable to connect.

  Back on the Windows 7 PC, I see the mcx1 file it under the users folder. But when I got to the tools, it says no set Extender in place.

  Someone at - it suggestions on how to change settings in Windows 7 while the Xbox can connect?

  Just in case someone encounters this problem, here is what I did:

  1. reboot the Xbox until Windows Media Center connects.
  2. back to the PC. Start Windows Media Center.
  3. go into tasks > settings > Extender
  4. Select Xbox 360 Media Center, then delete.
  5 PC removes the old mcx1 folder used to use with Vista.
  6. start the Xbox, go to Windows Media Center
  7 write down the code on Xbox's 8-digit ' display
  8. on the PC, you will be prompted to set up the Xbox extender
  9 follow the instructions to enter 8 digit code
  10. new file will be created, mcx1-PCNAME.

  You're all set on 7.

• First elements 10 HG1920 AVCHD (.m2ts) playback is choppy

  Hello

  Installed first Elements 10 day before yesterday and we tried a small project using my camcorder Panasonic SD900 material. The shots are HG1920 AVCHD (.m2ts) format. When I place them on the My project Panel and play them they are jerjy and shimmering. I tried to play sequences individual back by double clicking it in the task pane, and they play very well. I was given to understand that first Elements 10 can cope with the AVCHD formats. It's early days, but I I'm not at the moment who has impressed with the product.

  Title of the message was edited by: Brett N

  Thanks Neale

  Went to the MT2-H264/1920X1080i 25 AVCHD format and playback was fine

• Start the flv playback component playing mailed paused after n seconds

  I have a component playback flv (vidPlayer) with a set number of landmarks.

  When a cue point is reached the flv playback component stops

  and an externel swf is loaded from the staging. I know that the swf file plays for

  124 seconds. What I would like is for the flv playback component to start

  playing again hence is was suspended at the end of these seconds 124

  [code]

  If (event.info.name == "lit_23") {}

  lit_22.visible = false;

  var Xpos:Number = 94;

  var Ypos:Number = 78;

  var swf:MovieClip;

  var loader: Loader = new Loader();

  Loader.x = Xpos;

  Loader.y = Ypos;

  var defaultSWF:URLRequest = new URLRequest ("colours.swf");

  Loader.Load (defaultSWF);

  addChild (loader);

  component playback FLV stops

  vidPlayer.pause ();

  now start playback position break after 124 seconds

  }

  [/ code]

  Import fl.video.MetadataEvent;

  vidPlayer.addEventListener (MetadataEvent.CUE_POINT, fl_CuePointHandler_3);

  function fl_CuePointHandler_3(event:MetadataEvent):void
  {

  If (event.info.name == "lit_1") {}
  lit_1.Visible = true;
  }
  If (event.info.name == "lit_21") {}
  lit_20.visible = false;
  lit_21.Visible = true;
  }

  If (event.info.name == "lit_23") {}

  var loader: Loader = new Loader();

  Loader.Load (new URLRequest ("smallvideo.swf"));
  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, swfLoaded);

  Loader.x = 91;

  Loader.y = 82

  }

  If (event.info.name == "lit_22") {}
  Loader.Visible = false;
  lit_22.Visible = true;
  }

  }

  function swfLoaded(event:Event):void {}

  var loader: Loader = event.target.loader;

  trace ("Loaded")

  MovieClip (loader.content). your_flv_pb_instance_in_smallvideo. addEventListener (Event.COMPLETE, smallVideoFLVCompleteF);
  lit_21.visible = false;
  lit_1.visible = false;
  addChild (loader);
  Loader.x = Xpos;
  Loader.y = Ypos;

  vidPlayer.pause ();
  }

  function smallVideoFLVCompleteF(e:Event):void {}

  vidPlayer.play ();

  }

• Play, stop after 15 seconds on iPod Shuffle

  My wife I recently purchased an iPod Shuffle and headphones Skullcandy method for Christmas. The plan was to use for the race (Skullcandy are more comfortable than most of the Earbud Headphones, Apple included).

  Unfortunately, when I try to play music after about 15 seconds of reading the track abruptly fades, and then stops. If I press play again, the track will start again then wither and stop after 15 seconds... and so on! The battery is fully charged. The period of time until the music stops seems very accurate, so I don't think it's a bad connection.

  I've not had much luck trying to find the question - this request doesn't seem to be that common. States of FAQ of SKULLCANDY headphones are compatible with my iPod model: http://www.skullcandy.eu/customer-service/faq/faq.html

  I tried without success to the following:

  • Restore the iPod
  • Using disk utility to analyze and repair the iPod
  • Let it take over completely (just in case where iTunes has been somehow misreading of the amount of charge on the iPod)

  I tried with another too - Apple and some AKG - helmet which seems to fix the problem. BUT the Apple headphones are useless for the race and my AKGs are reserved for the studio. I want to use the Skullcandy headphones! It is a 3.5 mm jack, it should work!

  So, my questions are:

  1. All the world had or heard about this problem (with Skullcandy or any other headphones)?
  2. There is a known compatibility issue? (I don't like about the features of the control of the headphone button works with the iPod - I want just works fine).
  3. Anyone have any suggestions to solve this problem or a work-around, before buying a new helmet?

  Thank you

  J

  iPod Shuffle (2 GB) 4th Gen 1.0.3

  iMac (27 inch, end 2013) race El Capitan 10.11.2

  SKULLCANDY method (S2CDGY-405)

  If it works correctly with other headphones, the cause must be the Skullcandy headphones.  It is defective, or design is not compatible in some way.  It seems that these headphones have controls on the cord.  There may be a short circuit that is causing a faulty signal playback.

  "15 seconds" is maybe the shuffle 'expire' because it does not recognize the headset is connected.  The adjustment can be different between helmet, in order to ensure that the plug is fully inserted into shuffle headphones Jack.  It is tighter than expected when shuffle is brand new.

  You have another device, like an iPhone, try with the Skullcandy?  Or you can also try with your iMac.  Your iMac can use the power cord remote control signals, as well to launch iTunes and play a song to see if anything unusual occurs.

• Youtube video of yoga stuck 8 after 27 seconds

  I have yoga 8 4.4.2 android running and the youtube app update. All tube videos you stuck exactly after 27 seconds to play. Audio to work well. Everyone face similar problem?

  I am doing this side only if playback of video in youtube app. If the video is embedded in the Web site (even if the source is still youtube)... The hanging of video stream is not the case.

  Update:

  There is a system update, I've seen today with the build number. 140811... applied the update and after reboot it seems that the problem has disappeared.

• videos on web pages stop playing after 5 seconds

  I just installed Windows XP Home Edition on an old Dell (Dimension s 4500) computer.  Most things work well; However, I notice that all the videos on websites play for about 5 seconds and then stops.  The full video continues to be downloaded and can be restarted by clicking on a different location on the timeline - after which he played for 5 seconds.  This happens with Internet Explorer and Firefox and all the sites I've tried.

  It seems I missed some setting somewhere.  Any ideas?

  Duplicate content of the wire-
  "Earlier, I posted a question on playback of videos from web pages (" videos to stop web pages play after 5 seconds '). " Since then, I have studied the possible fixes on Windows sites as well as the Dell support pages (the computer is a 4500 s Dell dimension running Windows XP Home Edition). All responses/advice found do not seem to solve my problem. All drivers and all plugins are here and up to date. The problem is not caused by lack of bandwidth or buffer - download videos at a reasonable speed. It's just that they will play only about 5 seconds. Then they stop and not restart by themselves.

  In addition, the videos have played very well until I reinstalled Windows XP from a boot disk, so I'm sure that all the works of material.

  It's driving me crazy! Can anyone help? Please, I beg you! »

  I wonder if it's a snap in IE and Firefox. You can try and disable them and see what happens.

• Unable to connect to the Oracle Forms cmdlet after 30 Seconds (OATS)

  Hello
  
  While playback get error of OATS (Oracle Application Testing Suite) am most of the time 'Impossible to connect to the Oracle Forms applet after 30 Seconds (OATS)'.
  
  Please suggest solution for this type of error. I can't go further with this type of error.
  
  Kind regards
  Sairam

  Hi Sairam,

  GoTo OpenScript preference and change timeout for reading of the EBS/forms.

  Launch OpenScript, click view and select Preferences OpenScript. Then select Oracle EBS/functional forms under playback. Change timeout value.

  Kind regards
  Dembélé M

• IPod touch sound stops after 10 seconds to watch the video of youtube

  IPod Touch 9.3.2 volume stops after 10 seconds while watching a YOUTUBE video. Continue to play video.

  This happen using the YouTube app?

  Or by using the YouTube site?

  Try it otherwise.

• C50-A-1HF satellite will turn off by itself after 2 seconds

  Hello

  the laptop turns off by itself after 2 seconds when I turn it on. This happens if I shutted down or choosed hibernate before (Win8.1).

  This means hibernation is not at all useable.

  The next time I turn it on it works quite normal! Sleep mode works as well. Standby mode it is ready for use after open them both as a repetitive. Fascinating!

  I looked on all the settings of the BIOS, but I found nothing what could be the reason for this behavior.

  Perhaps there is a correlation with another strange behavior. The battery will not be charged over 80%. I do not use the green mode. I have to turn off the laptop and remove the battery completely for a minute. After inserting and booting Win8.1 what it charges again at 100%.

  The discharge time is approximately 3.5 hours. Otherwise, the battery is ok.

  But after the next discharge up to 10% charge that up to 80% more.

  These two effects are not normal. But I don't think (or better, I hope) that there is a material defect.

  Is there a chance does not post the laptop to a repair service?

  Best regards

  Onurbi

  Hey man it are so strange problems and it's not easy to say what to do. All you can do is to install the original recovery image and test with the settings once more, of course without changing anything or install updates or additional applications.

  If possible to do this and test it for a while.
  > Is there a chance does not post the laptop to a repair service?
  As you probably know your possibilities to do something about this are very limited and if there is permanent problem I think you should contact the closest service Toshiba and clarify all of this.
  You have the new laptop model and it should work properly. If you are not happy and there are service problems Toshiba should take are about it and help you.

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

• Skype on Sierra - after 12 seconds of appeal stands - I can't hear your voice.

  Hello

  I have a big problem with my Skype.

  After that 12 seconds of appeal stands - I do not hear voices, but my client hear me.

  I run echotest, but even call echotest of break after 12 seconds.

  The steps:

  Uninstalled SKYPE cleaner and installed the latest version - did not help.
  I uninstalled Skype cleaner installed an older version - it did not help.
  I changed the method / extra internet connection (cable and my LTE network)-did not help.
  I changed the settings, turn off and turned on the macbook, nothing--has not helped.

  Sorry for my bad English.
  Help, please.

  Best regards

  Simon

  I've solved a problem!
  Problem was in the firewall settings!
  Turn it off completely for a while. It helped!
  
  Topic that you closed.
  
  * For those who have problems:
  Please check your firewall settings after the update of the Sierra.