Firefox is continually trying to access this IP: 91.224.160.212. Why?

Similar Questions

• Silverlight plug-in does not work on firefox. Everyone tries to solve this problem? Customer service seemed to have no idea and kept me around brewing to other numbers

  work on iMac 10.6.8
  have you tried using Firefox and Safari with no luck... of the plug-in does not open.

  I uninstalled, rebooted, reinstalled and restarted will be no appreciable results.

  This is work-related and has nothing to do with netflix.

  Thank you

  CJL

  Hello

   
  I suggest you to send your request in the Silverlight Forums for assistance.
  http://forums.Silverlight.NET/
   
  It will be useful.

• How to rename a new printer? I tried to access this feature in looking "devices and printers", but this process just turns around and shows me no devices or printers.

  The "Devices and printers" window does not work for me. It does not list devices that I currently have on my network. Although I can print from my printer, I want to rename it to distinguish it from another similar printer. How can I do this if the "Devices and printers" window does not work?

  Hello

  ·          What kind of network you are connected to?

  To rename a printer, you must have permission to manage the printer. You probably have permission if you installed the printer. If you are on a corporate network, you may need to ask your system administrator.

  See: http://windows.microsoft.com/en-US/windows7/Rename-a-printer

• On a Mac ios10.10, using the online service export to PDF format, an error message appears, "year error occurred while trying to access services."

  Can you advise steps I might take now?  On a Mac ios10.10, using the online service export to PDF format, an error message appears, "year error occurred while trying to access services."

  Hi Ringdoc,

  Please see this: "Error has occurred when trying to access this service" when you sign in to Acrobat.com

  Let us know how it goes!

  Best,

  Sara

• Firefox is hitting my firewall on port 80. Which tries to access the gateway/firewall?

  Linux firewall. When I launch firefox, I get loc2fw newspapers to dismiss on port 80. Is this a normal behavior? This should normally be associated with a virus tries to access a standard router. After the installation of a clean system, I still get these hits on my firewall. I used mozbackup to copy a few settings more from another machine.

  Last note: this Post of MozillaZine indicates that noscript uses secure.informaction.com to determine the WAN IP address, and that the behavior can be disabled.

• I'm using Firefox 9 and trying to download disconnection. Download tells me that I'm using version 3 of FX. How can I fix this error

  I'm using Firefox 9 and trying to download disconnect for FX. I get an error message that I am not using the latest version. I uninstalled and reinstalled FX with no change to the error message.

  Your string UserAgent in Firefox is marred by another program you have installed.
  
  http://en.Wikipedia.org/wiki/USER_AGENT

  type of topic: config in the URL bar and press ENTER.
  
  If you see the warning, you can confirm that you want to access this page.
  
  Filter = general.useragent.
  
  Right click the preferences that are "BOLD", a line at a time, select reset.
  
  Then restart Firefox

• Error: "you don't have permission to access this folder. ' Click on continue having access to this folder continuously ".

  Original title: cannot access files on a folder on the drive hard usb after you have turned off sharing on a network.

  About a week and a half, I have set up my external hard drive usb to share on my network domestic as well as my brother could access some files on his laptop computer.  I've been playing with the security of some of the files on the hard drive and made sure that he could not access some of them.  I don't remember exactly what I did unfortunately.  After I had changed the security access, I was still able to access all files and my brother could not access it.  He got the files on the hard drive and I turned off my computer.  A few days later, I tried to access the files that I had limited and I was stuck.  When I went back in the drive to recover some files, I received an error "you don't have permission to access this folder.  Click on continue to have access to this folder permanently. "When I click on continue that another dialogue box comes up saying"you refused permission to access this folder.  To access this file you will need to use the Security tab. "I click on the link to Security tab and another dialog box appears asking"to continue, you must be an administrative user with permission to view this object's security properties.  Do you want to continue? "I'm obviously the administrator because I have this computer and I'm the only account on it.  From this point, I don't know what I do or what I'm supposed to do to recover my files.  I played a bit with a couple of things and I was able to get into certain folders, but its an extremely long process that I don't have the time for.  A side effect of which in fact so I can see the files, is that for any movie file, I try to access it, I get an error.  When I try to open it with Windows Media Player, I get the error "Windows Media Player cannot access the file.  The file may be in use (which is not the case), you won't have access to the computer where the file is stored (which is not supposed to because the computer on which it is stored my personal computer), or your proxy settings are may not be not correct (what?). "If I try to use another program like VLC media player, I get a similar problem where an error comes up saying that it was impossible to access the file.  I can see the file and see the properties but I am unable to actually see the film.  I can't move the file anywhere because I don't have administrative rights.  I'm under Windows 7 Ultimate, and if someone could help me please, that would be greatly appreciated.

  Hi Ridley,

  I see that this problem is old enough but you (or others) may have problems with it. Here's what I did:
  -Got to your hard drive and right click on the folder that is causing all the trouble.
  -Click on properties.
  -Click on the Security tab
  -Then click on advanced
  -You will see a window with a few user names. Now click on owner in the tabs above.
  -Click on edit, then select the user name you want to open the folder and don't forget to tick the box that says "Replace the owner of subcontainers and objects", then click on apply.
  A pop will come which says something like "You have replaced the property for the selected records" or something in this way. It worked for me and I hope this post is helpful for some people.
  Nina

• I continue to have a new page opens when I click on a button. For example, when I clicked on the "category" to access this page, another page open for Norton.

  For example, try to access this page caused another page opens with an advertisement of Norton. Happens not every time, but every 3 - 4 times. I got Redbox, QuiBids, RxConnection and ensure the car outside Norton. I can't figure out how to stop this.

  Hello OKHiltibrand, this looks like a problem caused by malicious software on your pc. Please go to firefox > addons > extensions and remove any suspicious entries (especially 3 layers Word, things that you have not installed intentionally, does not know what purpose they serve, etc.). also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a full scan of your system with the security software you have in place and various other tools such as the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

• When closing Firefox 13.01 I always get this pop-up: Exception EAccessViolation in module ntdll.dll to 000222 B 2. Access violation at address 77BF22B2 in module

  When closing Firefox 13.01 I always get this popup:
  Exception EAccessViolation in module ntdll.dll to 000222B 2. Access violation at address 77BF22B2 in module 'ntdll.dll '. Writing of
  address 00000008.
  With previous versions of FF it never happened.
  Any solution?

  Hello

  Please check if this happens in a new profile. If the new profile is correct, you can then reset Firefox on the old (previous) profile via the help (Alt + H) > troubleshooting information.

• using Firefox 11.0 when trying to 'bookmark this page' in the bookmarks drop-down menu at the top of the browser bookmark pop-up window, but it disappears when I move my mouse to the bookmark window

  using Firefox 11.0 on Windows 7 prof 64 bit, when trying to 'bookmark this page' in the bookmarks drop-down menu at the top of the browser bookmark pop-up window. When I move my mouse over the bookmark pop-up window to change the directory where you will store the bookmark, it disappears before I can do something? If I move my mouse near the yellow star on the right side of the window to the url, the menu bookmark can appear again, but it disappears when I move my mouse over it?

  Hello!

  We have seen similar problems in the past. Read this 2-wire and let me know if they help you:

  https://support.Mozilla.org/en-us/questions/899098
  https://support.Mozilla.org/en-us/questions/850203

  Good luck
  Ibai

• I am trying to access the security settings in my Apple ID, but due to too many attempts to answer my questions of security, this option is blocked. How can I unlock it?

  I am trying to access the security settings in my Apple ID, but due to too many failed attempts to answer my questions of security, this option is blocked. How can I unlock it?

  You can see this page if your identifier Apple is locked to see how to solve this problem.

  https://support.Apple.com/en-us/HT204106

  If you cannot solve this way, please contact support at the link below!

  https://getsupport.Apple.com/

• Error MESSAGE: "Setup HAS the PRIVILEGES SUFFICIENT TO ACCESS this DIRECTORY: C\PROGRAM FILES (x 86) \QUICKTIME\QT SYSTEM." THE INSTALLATION CANNOT CONTINUE. LOG ON AS AN ADMINISTRATOR OR CONTACT YOUR SYSADMIN "_".

  ERROR MESSAGE:

  "THE installation program HAS the PRIVILEGES SUFFICIENT TO ACCESS this DIRECTORY: C\PROGRAM FILES (x 86) \QUICKTIME\QT SYSTEM." THE INSTALLATION CANNOT CONTINUE. "LOG ON AS AN ADMINISTRATOR OR CONTACT YOUR SYSTEM ADMINISTRATOR.

  TRY SEVERAL DIFFERENT PROGRAMS TO INSTALL/DOWNLOAD AND KEEP THIS SIMILAR ERROR MESSAGE ABOVE!

  WHEN, IN FACT, I AM THE ADMINISTRATOR ON MY COMPUTER! HE DIDN'T THERE WAS NO OTHER USERS ON MY COMPUTER. WHY IS THAT IT IS SAYING THIS? VERY FRUSTRATING! THANKS FOR YOUR HELP IN ADVANCE!

  1. Open the prompt with administrator privileges by opening the Start Menu, type cmd in the search box, pressCtrl + Shift + Enter or click Start orb, all programs, Accessories, right-click on command prompt and selectrun as administrator.
  2. Type the following at the command prompt, and then press enter after:

     NET user administrator / Active: Yes

  3. Restart your computer and logon as an administrator.

• 'PC' is not set up to establish a connection on port "file and printer sharing (SMB)" with this computer - I get this after enabling access to public folders and then trying to access (another pc on the network cannot connect to this pc but see).

  • Tried to reconfigure the firewall
  • Tried to change files and printers, sharing options
  • Restarted other computers trying to connect to my public folder
  • Tried to adjust the network discovery
  • Do all computers on the network among the same workgroup
  • I can access public folders from the other computer and their content
  • Other computers on my network, in my workgroup can see my public folders, and users, but cannot access it.
  • Other computers can see my computer, but can not access: error code: 0 x 80070035.

  Can't access: 'Public' and 'Users' in the title:

  -Network
  MyName-PC

  Please don't give me that: "If you try to connect to another computer, make sure that this computer is on, that you have enabled file and printer sharing on both computers, and file and printer sharing can communicate through your firewall." Because I seek NOT to connect to another computer... I want to just access MY Public folder and the users folder and eventually allow others to access also.

  Hi Katmandu774,

   

  Welcome to Microsoft Answers Forums.

  The Public folder is a convenient way to share files that are stored on your computer. You can share files in this folder with other people using the same computer and with people using other computers on the same network. Any file or folder you put in the folder Public is automatically shared with the people who have access to your Public folder.

  If you are not on a domain, you can limit network access to the Public folder so that people with a user account and password for this computer. To do this, turn on sharing protected by password.

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to password protected sharing, and then click one of the following options:

  ·         Turn on password protected sharing

  ·         Turn off password protected sharing

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To control the level of access to the Public folder

   

  1. Open the network and sharing Center by clicking the Start button, clicking Control Panel, click network and Internet, click network and sharing Center.
  2. Click the arrow next to public folder sharing, and then click one of the following options:

  ·         Turn on sharing so anyone with network access can open files

  ·         Turn on sharing so anyone with network access can open, change and create files

  ·         Turn off sharing (people logged on to this computer can still access this folder)

  1. Click apply. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Also, make sure you add everyone to the public folder and give the necessary permissions to access it.

  Sharing files with the Public folder

  http://Windows.Microsoft.com/en-us/Windows-Vista/sharing-files-with-the-public-folder

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• While trying to access another document, I get this "error in the object calling ScriptTypeError not valid."

  Original title: error

  I work in the database search.  In a particular site while trying to access another document, I get this... Error in the object of the invalid ScriptTypeError call.

  How can I fix it?  I be milling of the answers, I went to frequently asked questions, found no answers. I hope someone can help.

  Thank you

  pipster43

  Hi Pipster43,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum. Please ask your question in the Forums in TechNet Windows Server.

• When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. What this means and how do I continue to Word so I can edit pdf

  When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. -What this means and how do I continue to Word so I can change the pdf document?

  Hi wayned76005641,

  You subscription Adobe export to PDF, make sure that you are signed in DC from Adobe Acrobat Reader Adobe - Adobe Acrobat Reader DC Distribution using your Adobe ID to use the service to export it to PDF service The Adobe export in PDF format allows you to convert a PDF to Word, Excel, PowerPoint and RTF formats..

  You can also use this online https://cloud.acrobat.com/exportpdf service

  Once the PDF is converted .docx file you can edit in MS Word.

  Kind regards
  Nicos