After awhile java.exe is the CPU at 100%

Similar Questions

• Windows XP I often setup.exe keeping the CPU at 100% for at least a few minutes.

  Running Windows XP, I often setup.exe keeping the CPU at 100% for at least a few minutes... this process can be completed or ignored?

  "Setup.exe" is a generic term used by many applications.  The short answer is 'yes', it's OK to complete the process, but you really need to know what it is and why it continues to run.

  You probably need to download, install, update and run these free malware scanner (not at the same time):
  MalwareBytes AntiMalware
  SUPERAntiSpyware

  If that is not fix things, and assuming that this process begins when you start the computer, download, install, and run Autoruns.  When Autoruns has finished scanning, click the 'Connection' tab and look for the line that contains "setup.exe".  You can just uncheck the box on the left, or remove the item, which will prevent the routine of starting when Windows starts.

  Preferably, however, you should look at the path containing setup.exe where you should be able to deduce what application is trying to set itself up.  You can then take the appropriate measures, which may be simply delete the folder that contains the file.  Note that if you delete the file, you must ALSO remove the line in Autoruns, otherwise you will get a "file not found" error every time Windows starts.

• Portege will extinguish after iTunesphotoprocessor.exe gets the CPU to 100% usage

  Hi all

  I am having a problem with my Toshiba Portege and sync with my iPad2.

  I'm syncing large amount of photos to my iPad, when synchronization progess is at the stage of optimization photos iTunes runs two processes iTunesphotoprocessor.exe and the CPU usage is 100%.

  The Toshiba fan then runs at full speed until the immedialtey of the computer turns off.
  It is not a normal shutdown of Windows 7 64-bit. It's an energetic power loss, while the Toshiba is on a/c.

  I can reproduce the same with my iPhone 4.

  I thought I should use a USB hub with an adapter separated instead, unfortunately, there is no difference.

  It is not only synchronize photos that it occurs also when I sync movies and only iTunes.exe running at 100% CPU usage.
  Which brings me to the conclusion that the iPad draws a lot of power of the Toshiba until the laptop is on its knees.

  I use external drives (not USB powered) and can copy a lot of data without any problem.

  Perhaps worth mentioning that I have improved the Toshiba two months ago for Windows 7 64 bit and installed all the 64-bit drivers found here on the forum with the upgrade of the BIOS.

  Any hint is appreciated.

  Thank you

  Hello

  In my opinion this has nothing to do with the power supply or the power adapter plugged.
  The iTunesphotoprocessor.exe belongs to the iTunes software and in my opinion this software highlights the laptop CPU s that cause automatic shutdown!

  This means that it is not a problem of laptop but the Apple software.
  I m not sure if it s a compatibility issue with 64-bit Windows system, but he s certainly an iTunes problem

  So, in my opinion, you need to reinstall this software to see if that would help
  You can uninstall this software from the system and could clean the registry with CCleaner, it helps to clean the registry
  After that and after new restarts, you can try to install a version compatible 64-bit iTunes maybe it helps

• ccSvcHst.exe inhibits the CPU at 100% on XP Media Center 2002 (Service Pack 3). PC does not respond until the end of ccSvcHst.exe there domination of 30 to 90 minutes.

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3)

  • PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes.
  • Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM).
  • Has always been a problem with Microsoft Media Center o/s, which has worstened and occurs more frequently.
  • The PC makes it completely useless.
  • Unable to complete the process or decrease its priority.
  • If hardbooted, the ccSvcHst.exe process usually will continue during the restart.
  • Running Norton 360.
  • Please indicate if you need additional information?
  • Thank you in advance with the help of solution (s).  Your help is greatly appreciated!

  The list file you most often is a process associated with Norton 360. However, malware is sometimes assumed the names of the legitimate files in order to deceive the end user. Norton is a Devourer of known system and as a result, I wouldn't be surprised to learn that he is a legitimate file in your case. However, I recommend you download, to update and scan with Malwarebytes and Superantispyware, just to be sure. If the scans do not detect the file and the problem persists I would contact Norton or remove Norton making sure to use the tool to uninstall do.

  Malwarebytes.org

  SUPERAntiSpyware.com | Remove malware | Remove spyware - AntiMalware, AntiSpyware, adware!

  Sometimes to decide what battles to fight the toughest battle of all... Visit my forum @ http://repairbotsonline.forumotion.com/forum.htm

• Program path: c:\windows\system32\audiodg.exe, HELP the cpu at least 99%

  Program path: c:\windows\system32\audiodg.exe, HELP the cpu at least 99%

  Hello

  Method 1: I suggest you put the computer to boot is a way to determine what's asked the origin of the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also try the steps in the link and check if it helps:

  A problem with leaks memory occurs in the Audiodg.exe process when you play audio on a computer that is running Windows 7, Windows Server 2008 R2, Windows Vista or Windows Server 2008

  http://support.Microsoft.com/kb/981013

  Important

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Read the CPU hits 100% in the FIFO usage

  I have a PC in real-time with a card of RIO 7833R. I write the values that I read a microphone in a FIFO at a sampling rate of 4 kHz.The length of the FIFO is 2048. The PC in real-time, when I call 'FIFO read' function to read say 400 data samples, the use of CPU time real PC hits 100%. Why is it so? The function 'Read FIFO' is placed inside a while loop.

  Thank you

  Prashant

  Hi Prashant,

  Reading the FIFO is a method of querying, so if the number of elements specified to read are not available when the method is called, it queries the FPGA until they are.  This causes the CPU to 100% usage. You can find more information on this subject and a way around this here.

• Svchost.exe is causing cpu at 100% of capacity

  My computer is very slow. I ran the antivirus software and malware, and it finds nothing. Finally, I found that the CPU is at 100% and it looks like several SCVHOST. EXE are running taking up all my CPU. How can I stop this and speed up my computer?

  Help, please!

  There are supposed to be several svchost.exe running process.

  This is explained in article http://www.howtogeek.com/howto/windows-vista/what-is-svchostexe-and-why-is-it-running/ there are also instructions on how to get more information about which services can cause problems.

• Event Viewer Help - PC uses the CPU to 100% every 10 seconds

  Every 10 seconds, my CPU goes to 100% usage and then back down to normal levels.  When I check the event viewer, it says that Itunes is the source of the problem.  I uninstalled Itunes and other Apple software and still have the problem.  How to use the info in the event viewer to clear the file that asks that question?

  The event viewer displays the following:

  GroupOperationId 143

  OperationId 800

  Operation Start IWbemServices::ExecQuery - select * from Win32_Product where Name = "iTunes."

  ClientMachine Local

  User . \SYSTEM

  ClientProcessId 0

  NamespaceName \\.\root\cimv2

  Help! I have spent HOURS trying to understand this point and cannot!

  Thank you

  Jaime

  Go to http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click on everything and see if there are lists of iTunes.  If so, clear the checkbox to remove the starter.  Check the complete list in case there is more than one entry.  When finished (if you foind alone), reboot and see if the problem persists.

  Download Revo and use it to uninstall iTunes http://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html.  He is able to find and to perform an uninstall, then restart and see if the problem is resolved.  If he could not find or uninstall iTunes do not bother with the reset - it did not work.  Try to reinstall iTunes and then uninstall with Revo instead of Vista uninstalling the program to see if that makes a difference.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  Double-click the error message in the event viewer, and it can provide premanente details that can help us find the problem.  Here's how to use Event Viewer: http://www.petri.co.il/vista-event-viewer.htm. Display any additional information that you will learn (if any).

  In the Task Manager when you see the running process, try clicking on it and then click end task.  Is there any task containing more than 10% of the CPU at all times - if so, what?  I assume that you have already tried it and a new process starts just 10 seconds later.

  The above information is useful in telling us that iTunes seems to be the cause.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HPCompaq laptop running Windows 7 32 bit Ultimate edition always maxing out the CPU at 100%

  long story short info above more than 4 GB of RAM, 8500 MB virtual, Microsoft Security Essentials running.  CPU is and remains 100%. I used Disk Cleaner, CCleaner, Comodo, Combofix, chkdsk f, Defragmenter, HiJackThis, Kaspersky, killbox, minitoolbox, rKill, sfc/scannow, regedit, Fabar, Norton, Norton Erasure Secundia, rogue, esetrogueappremover, esetsysinspector, kingsoft antivirus junkremovaltool listparts, securityscanner of Microsoft, SuperAntispyware, speccy, greatis reanimatoradaware, Malawareft, avast, forticlientlite, AND none of them found nothing. I did at least 6 clean / custom installs two different iso downloaded from digital river on Hd wiped, repartitioned and reformatted with diskpart. FEES. The second of what I get to install the installer... BAM! 100% OF THE CPU. I used msconfig, services.msc. prayer, crossed fingers and toes. How he survives, it would be in my bios? What about a network card and the part of the BIOS? Help!

  Hello

  Thanks for posting the question in the Microsoft Community!

  Try restarting your computer in safe mode and check if the problem persists.

  If the problem does not persist, I you suggest to restart the computer to return to normal boot and then run Autoruns by downloading it from the following link:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  Once Autoruns runs in the computer, it will show the use of the processor by the exact process names. I suggest you to respond with the names of your higher CPU processes.

  If the situation is the same in safe mode, I suggest you to contact the manufacturer and try to run hardware diagnostics on the computer.

  Thank you.

• I can't find the fix_svchost.bat file update. The svchost.exe process is spiking the CPU at 100% after the computer crashes.

  Original title: I can't find the fix_svchost.bat file update.

  I'm in you process of having my computer running faster. The svchost.exe process takes 100% of cpu memory and computer dthe freezes. A friend of mine told me a method to solve the problem, but I can't find the fix_svchost.bat update. I went to microsoft update center and don't find any results at all, and I don't know another place to look for. I think that the update does not even exist.

  I could send you a fix_svchost.bat file, but I don't think it's the starting point.

  What you need to do is run a few respectable scans for malware first, and then see if any of you are your svchost.exe process is still badly behave.

  Behind each of the svchost.exe process that see you in the Manager of tasks can be one or more process of XP you have to be running, but malware is KNOWN to imitate or hide behind a svchost.exe process, so you won't be able to see in Manager tasks.  You have to outsmart it.

  First yo should make a reasonable effort to eliminate malware, and then start troubleshooting - not the other way around.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  These comprehensive analyses can take some time, but you really need to run.  SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

  They can be uninstalled later if you wish.

  In 1985, there were 11 known computer viruses.  Today, there are over 70,000 and new threats are detected every day.  Always update your virus definitions before running a scan.

• After you install an update from the CPU to 100% usage

  I installed an important update for Win 7, it was for forefront security. After the installation was successful, I saw that my CPU usage went to 100% and the memory above 70 %s. In the Task Manager, I saw around 50-100 process rundll32, and also a lot of wermgr.exe. I tried to uninstall the update, but the problem is that I can see that update my update history (control of configuration\systeme and Security\Windows Update\View update history) but when I want to uninstall that I don't find it in the installed updates. Please help me how to get back to the original on my laptop configuration. This problem heat intensely my laptop and I fear that it could damage my system.

  Thank you

  Anshul

  Try posting in an appropriate instance of Forefront specific: http://social.technet.microsoft.com/Forums/en/category/forefront ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Igfxupdate.exe forces the cpu to load 100%

  Recently, my cpu load @ full, when open the Task Manager it remains cool. I couldn't find IGFXupdate.exe job manager. When deleting the file in the windows folder, it activates by itself once the Task Manager is closed. Please someone find a solution to my problem... Even google is looking for the answer...

  Thank you

  Hi, after several hours of attempts, I think I finally found the culprit:
  most likely a Trojan Generic 792778 of KDV, it claims to be the windows service "Search Indexer" and it creates the executable file false: 'igfxupdate.exe' who tries to connect to the internet and increases cpu load all the time until you open the Task Manager to hide...
  So I solved the problem like this:
  in the windows services management console, I disabled the above fake windows service (he was in automatic start mode) and after I deleted the igfxupdate.exe file in the windows system32 folder...
  I restarted the pc and I deleted the same service with the command: "sc delete SearchIndexer '...
  problem solved! CPU back to the normal level, no more connections and no more files igfxupdate autour...
  in any case, for more security, it is best to also do a full scan with a good antivirus/malware software

• ESSSVR.exe using the CPU @ 96.37%

  Hi all
  
  We have 4 application that will load data on a daily basis and we have provided in the planner of Arcana.
  
  Every day, each process will take 2 hours of time to finish loading the data.
  
  Today it took 5 hours and CPU utilization 96.37% (esssvr.exe).
  
  Please let me know the possible reasons.
  
  I use Essbase 7.1.2 SQL server 2005 and Windows 2003 server.
  
  Thank you
  Alain

  So it's a loading data to a cube ASO?

  Would it be a problem with SQL Server if that's where the data come from?

  Kind regards

  Cameron Lackpour

• stop DC-source after awhile and then begin the pressure measurements

  I don't think that what I want is so difficult, but I have very little experience with labview.

  I generate a continuous voltage for a period of time. After the time of the source voltage must become zero and pressure measurements must begin.

  In vi, I did the steps start at the right time, but the source never generates a voltage.

  I placed a picture of the diagram as an attachment. There is nothing in the case if the value false.

  The while loop ends after the time to reload, and then the case would become true.

  The part related to PXI1Slot2 for the source and the part related to PXI1Slot3 for measurements. (But as I said, there is no problem with my measurements, the DC-source is my problem)

  I know that I can use the source because I can do generate a voltage if I place the part related to PXISlot2 on its own to a vi.

  Hello

  Both sides in the case structure should arrive in a certain order? As they are it is unclear who will take place in what order.  If they must be in order, use the wire of the error to force the order or try a sequence structure to put them in order in consecutive images.

• I recently installed Firefox and choose one of the Harry Potter origins, but after awhile like to change the background of the standard home page, one you help me do this?

  Please tell us the steps to swap out the bottom of Harry Potter for the standard Firefox... while I like it, the background is too busy at the top of the screen of my laptop. Thank you

  See http://support.mozilla.com/en-US/kb/Using%20themes%20with%20Firefox#w_managing-themes-and-personas
  
  Choose 'Default' for the default theme of Firefox.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You must update some plug-ins:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox