After cleaning my laptop problems

Similar Questions

• After cleaning the laptop keyboard, Touchpad has stopped working.

  Original title: Touchpad not working not

  Help
  I use a Compaq 615, my Touchpad no longer works after you have cleaned my laptop keyboard, but when I checked the setting of the control panel mouse it says "work unit". How can I get the touchpad working again.

  Hello

  This problem may occur if the Touchpad settings have changed.

  You can try to reinstall the latest drivers for touchpad on HP website and check if it helps.

  a. click Start, select Control Panel.

  b. double-click Systemclick on hardwareand then click device Manager.

  c. click on the PLUS SIGN to expand unit.

  d. click twice on the device driver.

  e. on the Driver tab, click on Uninstall.

  f. restart the computer.

  Synaptics TouchPad Driver

  If the problem persists, you will need to contact HP support for help.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• DRM after migrating to laptop problems

  Hi, I have a new MacBookPro and am running Windows XP SP3 via VMWare. I recently migrated the data on my new laptop from a former. Since then I've been doing a DRM fault trying to use Overdrive. I went through the steps to reset my DRM and failed. The option button in the security component page cannot be selected. All ideas

  Hi Michael,

  How have you tried resertting DRM?

  You can read the following article and try the steps to manually reset the DRM rights.

  When you try to use Windows Media Player 11 to play a digital camera digital rights management (DRM) - multimedia file protected, the media can not play

• I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVDs, serial number and pack

  I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVD, the serial number and packages, but I can't use it.

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

• HP 1000 Notebook PC: Cleaning computer laptop loud fan.

  Is it fair to clean my laptop fan with the shoe brush with plastic filaments? I have problem of my laptop computer fan nose after that my repairman he cleaned with a spray WT-40. It's making a lot of noise and causing the battery to disappear quickly, I am managing by plugging the AC adapter for the moment. I'm sure this isn't the best thing to do. Can lubricate the coils / set inside the fan reduce that noise? If so, please suggest some lubricants that are suitable.

  Please suggest me a solution if it does not work.

  Thank you.

  Sohaib7631 wrote:

  Is it fair to clean my laptop fan with the shoe brush with plastic filaments? I have problem of my laptop computer fan nose after that my repairman he cleaned with a spray WT-40. It's making a lot of noise and causing the battery to disappear quickly, I am managing by plugging the AC adapter for the moment. I'm sure this isn't the best thing to do. Can lubricate the coils / set inside the fan reduce that noise? If so, please suggest some lubricants that are suitable.

  Please suggest me a solution if it does not work.

  Thank you.

  WT-40 that burned more or less fan adding oil in fans asking for trouble. And now, your technician is responsible for setting their mess, they created. You never add oil in the fan - where did learn to do repairs. You replace the fan with a new fan. You can't fan hurt to become the new worst oil spray, you risk the oil to burn and cause a fire in your laptop.

• Unable to save my Cs3 after reformatting my laptop computer.

  Unable to save my CS3 after reformatting my laptop computer. Indicates a connection failure. "We were unable to connect to Adobe to register your product."

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• Windows update fails to Downlaod after clean install

  Hello

  Im having problem installing windows update after clean install (although it happned to me after GHOST as well)
  On my new computer, I have 2 updates of isnatll 1:
  (1) Windows Genuine Advantage Validation Tool (KB892130)
  (2) update for Windows XP (KB898461)

  When I try to install them by using "Windows Update" or "Microsoft update" I get the following error code: Error Code: 0 x 80246002

  someone meet souch problem?
  When google for a solution based on this error code I found nothing.

  Thank you very much for your help,
  see you soon

  What were the problems you saw that you thought a "clean install" of Windows XP could solve?

  This "clean install" included formatting the HARD drive?

  The "clean install" left you with WinXP WinXP SP1, WinXP SP2 or WinXP SP3 gold (no Service Pack)?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a test free version comes preinstalled when you buy it and that would have been reinstalled, but invalid, when you did the clean install)?

  You receive an error code "0 x 80246002" when you use Windows Update or Microsoft Update Web sites to install updates:
  http://support.Microsoft.com/kb/958056

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My battery does not load after my Vista laptop off for 3 months

  my battery does not load after having my laptop for 3 months

  * original title - after a 3 month vacation my battery not charging *.

  Hi jimycaan,

  1. How are the battery once the power is discharged?

  2. what happens when you try to connect the laptop to the main supply and work on it?

  You can update the BIOS and see if the problem is resolved. Follow the steps mentioned in the article below.

  BIOS: Frequently asked questions

  Note: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can also consult the following link for more information:

  Solve battery problems

  Hope this information is useful.

• Sound in my laptop problem

  I use dv Envy 7, after the purchase, the sound works fine. But now I have sound problem, I take its maximum, but I can't hear anything. After restarting my laptop, sound works. What I have to do for it?

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  When windows has reloaded, use the Recovery Manager to reinstall your original IDT HD Audio driver as it is stated in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• I was somehow infected and after restarting the laptop, it goes to a white screen.

  Original title: Virus

  I have an old HP Pavilion 2008. I was somehow infected and after restarting the laptop, it goes to a white screen. Not even the HP logo lights up. I can't access installation even though I know which key press.

  I created a bootable windows DVD 7 and a USB port. I can not even boot from one of them. With the DVD, it sounds like it wants to read, but there is something else wrong.

  Any help would be greatly appreciated.

  If the HP logo comes and you can't access BIOS, the problem is more likely to be at a lower level. A failed HARD drive should not prevent you from access to the configuration.

  Several things can cause the logo appears at the top (I write from a HP Pavillion 2008). I've dealt with many laptops such as yours and have seen many causes. Faulty RAM memory is a. A problem with the video chip is another. In fact several kinds of tokens (two bridges, video..). A virus is more unlikely but not impossible (if he messed with your BIOS, it is possible).

  If you don't see movement in your DVD or HARD drive, something I'm leaning more towards the video chip. Especially if it's Nvidia or Radeon - it would be a miracle if you use an HP laptop of 9 years with a powerful video (so that there is time) without having had any problems with it until now (mine is Intel). They overheat easily.

  What I would do in your case:

  1. remove the battery and unplug the unit. Give it 10 minutes and see what happens. Small chance, it would be useful, but it's easier to test.

  2. If you are reluctant to remove anything yourself proceed to 4. Otherwise, open the case and look for a reset (might want to read in the manual how to do it), remove the internal battery.

  3 try to remove the first (try to run) then the other of your plates to RAM (assuming you have two). During the race, all the tests remove the drive HARD and DVD just to eliminate the possibility of interference. If you manage to get started and get the logo and enter BIOS start adding parts back one by one and you will find the faulty one.

  4. If it at a gas station. Now you can do anything, if you can not enter BIOS so it must be a hardware change.

• My computer laptop problem every time I open it stops about one hour automatically

  My laptop problem everytime I open fb or youtube time stops automatically, take him to a technician he already change the thermal paste, heat is normal fun to work correctly, we observed 2 hours after putting thermal paste all okey, so I try to open youtube and another browser, subject, and time my laptop again automatically shutdown , is someone with experience already this kind of problem, please share it to me so that I should know what will be I make, I'm looking forward to the help, thank you advanced...

  Hey chichi,.

  There are 2 reasons why this might occur on the computer.

  1. your computer is overheating.

  2. the version of Windows installed on the computer is a BETA version or Windows is not activated.

  Provide us with the following details.

  1. the version of Windows installed on the computer? http://Windows.Microsoft.com/en-in/Windows7/find-out-32-or-64-bit

  2. the full report of the MGADiag tool.

  http://go.Microsoft.com/fwlink/?LinkId=52012

  Run the tool. Click on the button continue, which will produce the report.

  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.

  3 check the latest event followed in Event Viewer before the computer shutsdown.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

  Browse the Windows logs, Application events (program) and check if there is no error and the last event that was followed before the computer shutsdown.

  Check the options (Settings) of power that are currently in use on the computer. Also, remember to change the power plan and check.

  http://Windows.Microsoft.com/en-in/Windows7/products/features/power-management

  Provide this information so that we can investigate the matter.

• I can't activate Windows 7 after cleaning installed.

  Activation of Windows 7 (upgrade) after clean reinstall

  Hi guys,.

  I have the problem with the Windows 7 upgrade version. I was with WIn 7 months with no problems. Win7 was installed on windows Vista in my case.
  But a few days ago, I decided to do a clean reinstall (from scratch, formatted HARD drive).

  The installation was funny until I got the error message telling me that my key is not for the clean install and I can't activate the system. I just left the empty key field and open windows.

  I thought that I activate the system in 'normal' mode not during the installation. So I now fully installed Windows 7 and I can't activate it - because the installation was made not M$ ' mroper way "." Very funny so the "right way" is to install windows Vista and upgrade to windows 7?

  The system has been enabled on this PC (the same harware 100%) before, so I can't do this again? I can not show same Vista installation CD, etc. installation key?

  Is there another way to activate it?

  Thank you

  Maciej

  I just followed the link information: http://www.sevenforums.com/tutorials/31402-clean-install-upgrade-windows-7-version.html option 3 was useful for me.
  Thnaks again for help

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• Wireless on Satellite C660d-14W after clean instalation of Win 7

  Hello

  I bought a toshiba satellite c660d-14w off the coast of a friend and reinstalled a fresh copy of windows 7 x 64.
  After installation, the laptop does not recognize any material (graphics, wireless network card, sound) so I slowly tried to install all the drivers for all.

  However, no matter what I install for the wireless, it just doesn't seem to work.
  Installed the driver from realtek RTL8188CE, driver lan wireless on Toshiba website and have set the network connections service car and restarted it and still nothing.

  In the Manager of peripheral devices, network cards, I have two entries:

  Realtek PCIe FE Family Controller
  &
  Realtek RTL8188CE WLAN 802.11n PCI-E NIC

  Suffice to say that they are working properly and have the latest drivers but I have no wireless access, does not display the icon in the status bar, and I just get a generic windows error message when you try to configure it manually.

  Help, please!

  Yes, the wireless network card seems to be properly recognized in Device Manager.
  The Satellite C660C-14W supports the Realtek RTL8188CE WLan chip.

  You said you do not have access to the WLan
  Did you check the availability
  Control Panel-> network sharing Center-> the settings of map (left)

  Here, you should see the wireless network card
  Is - this visible?

  If Yes, go to properties and uninstall the TCP/IPv6 protocol and use only TCP/IPv4

• How to clean my laptop screen?

  Hi all
  is someone can you please tell me what is the best way to clean my laptop screen or just a way to do it? I noticed that there are tasks and it annoys me a lot, but since the laptop screens are very delicate, I would appreciate a professional help from this forum...

  Maybe stupid comment, but I have cleaned with small liquid rags for spectacles. :)