After clone 12.2.4 prepare phase fails

Similar Questions

• CARS > cannot start the DEV database on the second node after clone of PROD

  2 node RAC
  
  Example 1: DEV11
  Example 2: DEV12
  
  Database version: 10.2.0.5.0
  OS: RHEL 5.5
  
  After clone database, we can only bring to the top of the database on node 1. After the start of the database in the instance DEV11, we cannot raise the database in the instance DEV12. After the start of the database in DEV12, we cannot raise the database pending DEV11.
  
  We receive an error ORA-00600 message.
  
  SQL > startup;
  ORACLE instance started.
  
  Total System Global Area 4429185024 bytes
  Bytes of size 2102032 fixed
  1191185648 variable size bytes
  Buffers data 3221225472 bytes
  Redo buffers 14671872 bytes
  ORA-00600: internal error code, arguments: [kccsbck_first], [2], [1523689643],
  [], [], [], [], []
  
  We went through the following Notes:
  
  ORA-600 [kccsbck_first] - what to check [157536.1 ID]
  
  Bug 2646914 : ORA-600 [KCCSBCK_FIRST], [2] IF ORACM & ORACLE has BEEN RESTARTED ON a NŒUD
  
  DIAGNOSTIC TEST:
  On the failed node, alert.log has a line which reads: "this instance was the first to climb." This is not true. The DB has been mounted on the other node.
  
  Rebound of the proceeding on the other node does not solve our problem.
  
  Ran also, what follows on both nodes, but that didn't help either.
  
  crsctl stop crs
  crsctl start crs
  
  Any advice would be appreciated... Thank you!

  See if the docs from metalink following can help you. Otherwise, please open SR with Oracle.

  1 ORA-600 [kccsbck_first] - what to check [157536.1 ID]
  2 commissioning (editing) of 2nd instance RAC fails with ORA-00600 [kccsbck_first] [395156.1 ID]

  Thank you
  http://swervedba.WordPress.com/

• I bought LR6 upgrade of LR3.6 that my new camera is not compatible. I could download LR6 on my PC but when I try to install I get error messageeven after many unistalls and reinstalls: setup initialization failed. This may be due to a m

  I bought LR6 upgrade of LR3.6 that my new camera is not compatible. "I could download LR6 on my PC but when I try to install I get the error even after many unistalls and reinstalls:" setup initialization failed. This may be due to a missing file. Download Adobe Support Advisor to detect the problem". Of course, that no longer exists. Help, please... Thank you

  Hi Lilianh71023988,

  'Could not initialize installation' could indicate a corrupted download. If you haven't done so already, try the following steps:

  1. Uninstall Lightroom 6: How to manually uninstall the Lightroom
  2. Use the Adobe Cleaner tool to remove the remains of program use the Adobe Creative Cloud cleaning tool to solve installation problems
  3. Download a new copy of Lightroom 6 to install Photoshop Lightroom
  4. Try reinstalling the program.

  If, after re-downloaded, you keep getting the same error, I recommend you to review the installation log files to identify the specific error: Troubleshooting Adobe Creative Suite install problems with log files.

  Let us know if you need help.

  Best,

  Del

• Someone at - it problems experienced installation PS 14 items on their Mac?  I managed to download the program after the purchase, but he continues to fail during installation.

  Someone at - it problems experienced installation PS 14 items on their Mac?  I managed to download the program after the purchase, but he continues to fail during installation.

  Frustrating.  I spent hours with 4-5 customer representatives Adobe tries to 'fix' my problem.  Finally, I just ask for a refund.  I was told 5 to 7 days until the refund appears on my cc.  I was considering buying the disc, but with your comment, I think I'll look for something else.

• I would like to activate CS4 after I formmated my computer, but it fails

  I would like to activate CS4 after I formmated my computer, but it fails because I already did several times. How do I activate? it is a software that I bought several years ago and I still serial number

  It's OK now - I was helped in the chat

• HTTP_SERVER do not come after clone

  
  After clone on Linux 6 64-bit HTTP_SERVER not to come

  [oracle@CHNMCT297942D scripts] $./adopmnctl.sh State

  You are running version 120.6.12010000.5 adopmnctl.sh

  Check the State of OPMN successful process...

  Process pending: VISEND_chnmct297942d.chnmct297942d.ad.infosys.com
  ---------------------------------+--------------------+---------+---------
  IAS-component | process type.     The NEST | status
  ---------------------------------+--------------------+---------+---------
  OC4JGroup:default_group | OC4J:OAFM |   32072 | Alive
  OC4JGroup:default_group | OC4J:forms |   32001 | Alive
  OC4JGroup:default_group | OC4J:oacore |   31867 | Alive
  HTTP_Server | HTTP_Server |     N/A | Down

  
  adopmnctl.sh: exit with status 0

  HTTP_Server ~ 1.log said

  --------

  13/09/06 11:29:53 launch

  --------

  StartSSL /Home/Oracle/Application/inst/Apps/VISEND_chnmct297942d/ora/10.1.3/Apache/Apache/bin/apachectl: execing httpd

  fopen: no such file or directory

  httpd: could not open config file /home/oracle/application/inst/apps/VISEND_chnmct297942d/ora/10.1.3/Apache/Apache/conf/endeca.conf document

  Not able to solve problems more.

  Hi Hussein and Asif,

  Problem solved. The firewall is turned on. I have disabled the firewall. opening of the URL and its working very well.

  We used it for our educational purpose where a newbie installed OEM 6 with the default settings.

  Thanks again.

• Whenever I try to download Adobe after effects that it says the installation failed and nothing HELP Please ME

  I tried to install after effects but then it says installation failed and come to this:

  Exit Code: 6 Please see specific errors below for troubleshooting. For example,  ERROR: DS012 ...   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 7 error(s)    ----------- Payload: Adobe After Effects CC 2014 Presets 13.0.0.0 {B11629D3-E9EE-467B-B9C6-30D37E2A39CF} -----------  ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 351)  ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 683)  ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 685)  ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 687)  ERROR: DS012: LocalizeFile:Localized string not found for locale 'en_GB'(Seq 689)  ----------- Payload: Microsoft Visual C++ 2008 Redistributable Package (x86) 9.0.30729.5677 {539B5BB0-18F9-11E2-BBBC-00215AEA26C9} -----------  ERROR: Third party payload installer vcredist_x86.exe failed with exit code: 1603  ERROR: Failed to install Microsoft Visual C++ 2008 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Aejeaz\AppData\Local\Temp\{907694F0-1B67-475C-8E74-2B81DF08E30B}\AfterEffects_13_LS20\Adobe After Effects CC 2014\payloads\Microsoft VC 2008 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2008 Redistributable Package (x86) from Microsoft website - www.microsoft.com  ------------------------------------------------------------------------------------- 

  A new update came out and fixed the problem I had so thx

• HOWTO add properties custom for redhat linux vm after 'Clone, Linux with a single NETWORK card.

  Hello

  How can we add the custom properties to a new linux vm after clone of model with the vco workflow?

  Something like ' / bin/echo x.x.x.x >/etc/newfile ", run this with sysprep or something (not ssh) inside the new VM for linux with a vco workflow.

  
  Someone at - it an idea about it?

  Thomas

  If you can't get it by sysprep, you can use the VIX plugin for vCO to run a command in the guest OS once it is deployed and under tension.

  http://labs.VMware.com/flings/VIX-VCO

• Once again... Problem connection after Clone

  I just finished a clone of our 11.5.10 environment under windows. Everything seems fine, preclone, adconfigclone and adautocfg. Now when I connect to the application, I get to the 'AppsLocalLogin.jsp' without any problem. Then, after entering the name and password, I get this error:
  
  Logout
  Error page
  Details of the exception.
  
  oracle.apps.fnd.framework.OAException: oracle.apps.fnd.cache.CacheException
  at oracle.apps.fnd.framework.OAException.wrapperException(OAException.java:891)
  at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1145)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1987)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:509)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:430)
  to _html._OA._jspService(_OA.java:84) oa
  at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
  at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
  at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
  at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
  at oracle.jsp.JspServlet.service(JspServlet.java:156)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
  at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
  at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
  to _html._OA._jspService(_OA.java:94) oa
  at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
  at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
  at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
  at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
  at oracle.jsp.JspServlet.service(JspServlet.java:156)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
  at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
  at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
  to _html._OA._jspService(_OA.java:94) oa
  at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
  at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
  at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
  at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
  at oracle.jsp.JspServlet.service(JspServlet.java:156)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
  at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
  at org.apache.jserv.JServConnection.run(JServConnection.java:294)
  at java.lang.Thread.run(Thread.java:479)
  # # 0 in detail
  oracle.apps.fnd.cache.CacheException
  at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
  at oracle.apps.fnd.functionSecurity.User.getUser(User.java:336)
  at oracle.apps.fnd.functionSecurity.FunctionSecurity.getUser(FunctionSecurity.java:527)
  at oracle.apps.fnd.functionSecurity.FunctionSecurity.init(FunctionSecurity.java:1620)
  to oracle.apps.fnd.functionSecurity.FunctionSecurity. < init > (FunctionSecurity.java:188)
  at oracle.apps.fnd.framework.server.OADBTransactionImpl.getFunctionSecurity(OADBTransactionImpl.java:2326)
  at oracle.apps.fnd.framework.server.OADBTransactionImpl.testFunction(OADBTransactionImpl.java:3590)
  at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.testFunction(OAApplicationModuleImpl.java:3814)
  at oracle.apps.fnd.framework.webui.OAPageSecurity.validatePageSecurity(OAPageSecurity.java:764)
  at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2150)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1735)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:509)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:430)
  to _html._OA._jspService(_OA.java:84) oa
  at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
  at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
  at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
  at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
  at oracle.jsp.JspServlet.service(JspServlet.java:156)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
  at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
  at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
  to _html._OA._jspService(_OA.java:94) oa
  at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
  at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
  at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
  at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
  at oracle.jsp.JspServlet.service(JspServlet.java:156)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
  at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
  at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
  to _html._OA._jspService(_OA.java:94) oa
  at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
  at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
  at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
  at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
  at oracle.jsp.JspServlet.service(JspServlet.java:156)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
  at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
  at org.apache.jserv.JServConnection.run(JServConnection.java:294)
  at java.lang.Thread.run(Thread.java:479)
  oracle.apps.fnd.cache.CacheException
  at oracle.apps.fnd.cache.AppsCache.get(AppsCache.java:228)
  at oracle.apps.fnd.functionSecurity.User.getUser(User.java:336)
  at oracle.apps.fnd.functionSecurity.FunctionSecurity.getUser(FunctionSecurity.java:527)
  at oracle.apps.fnd.functionSecurity.FunctionSecurity.init(FunctionSecurity.java:1620)
  to oracle.apps.fnd.functionSecurity.FunctionSecurity. < init > (FunctionSecurity.java:188)
  at oracle.apps.fnd.framework.server.OADBTransactionImpl.getFunctionSecurity(OADBTransactionImpl.java:2326)
  at oracle.apps.fnd.framework.server.OADBTransactionImpl.testFunction(OADBTransactionImpl.java:3590)
  at oracle.apps.fnd.framework.server.OAApplicationModuleImpl.testFunction(OAApplicationModuleImpl.java:3814)
  at oracle.apps.fnd.framework.webui.OAPageSecurity.validatePageSecurity(OAPageSecurity.java:764)
  at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2150)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1735)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:509)
  at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:430)
  to _html._OA._jspService(_OA.java:84) oa
  at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
  at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
  at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
  at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
  at oracle.jsp.JspServlet.service(JspServlet.java:156)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
  at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
  at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
  to _html._OA._jspService(_OA.java:94) oa
  at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
  at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
  at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
  at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
  at oracle.jsp.JspServlet.service(JspServlet.java:156)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
  at oracle.jsp.provider.Jsp20RequestDispatcher.forward(Jsp20RequestDispatcher.java:162)
  at oracle.jsp.runtime.OraclePageContext.forward(OraclePageContext.java:187)
  to _html._OA._jspService(_OA.java:94) oa
  at oracle.jsp.runtime.HttpJsp.service(HttpJsp.java:119)
  at oracle.jsp.app.JspApplication.dispatchRequest(JspApplication.java:417)
  at oracle.jsp.JspServlet.doDispatch(JspServlet.java:267)
  at oracle.jsp.JspServlet.internalService(JspServlet.java:186)
  at oracle.jsp.JspServlet.service(JspServlet.java:156)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:588)
  at org.apache.jserv.JServConnection.processRequest(JServConnection.java:456)
  at org.apache.jserv.JServConnection.run(JServConnection.java:294)
  at java.lang.Thread.run(Thread.java:479)

  Chris,

  Please see if these documents help.

  Note: 418130.1 - Unable to connect after Clone
  Note: 414170.1 - oracle.apps.fnd.cache.CacheException - null - on AppsLocalLogin.jsp connection

  Kind regards
  Hussein

• adoption apply phase failed. market to follow

  We are in the middle of the patching recommended on EBS R12.2.4 instance with 12.1.0.2.0 db. We conducted under activities up to now:

  adoption phase = prepare

  adoption phase = apply patches = 1

  adoption phase = patch = 2

  adoption phase = patch = 3

  .

  .

  .

  .

  .

  One of the patch failed:

  adoption phase = patch = 20592764

  We applied 30 patches up to now in adoption apply phase an and I still have to apply other hotfixes. Patch 20592764 failed due to incompatibility with the line of code R12.2 C.

  
  Error: AutoPatch error:
  --------
  This patch is not compatible with your current codelines.
  
  This patch is compatible with: "ad" - line of code entity ' R12. AD. B'.
  Your line of code on the current site for the entity 'ad' is: ' R12. AD. C
  

  It comes to the current state of the adoption:

  bash - $4.1 adop-status

  Enter the password for APPS:

  Current patch ID of Session: 75

  Name of node node Type Phase status started completed elapsed

  --------------- --------------- --------------- --------------- ------------------------------ ------------------------------ ------------

  appsnodex master PREPARE FINISHED 1st Aug 15 20:27:59-05:00 1 August 15 20:52:23 - 05:00 0:24:24

  APPLY THE FAILURE 1 AUG 15 20:57:48 - 05:00 2 AUGUST 15 05:05:53 - 05:00 08:08:05

  FINALIZE NOT STARTED

  COMMISSIONING IS NOT STARTED

  CLEANING NOT STARTED

  Folder synchronization system used in this Patching Cycle: full

  For more information, run ADOPTION Status Report using - option detail

  Generating the ADOPTION status report to the location: /dhdr2i/applmgr/fs_ne/EBSapps/log/status_20150802_072959/adzdshowstatus.out

  Please wait...

  Done...!

  adopted out with status = 0 (success)

  We do not use cancel that we already applied 30 patches and it will start the cycle from scratch. We are yet to apply the fixes over 40. Also several times giving up is leading to corruption of data dictionary in our case and a bug is already raised with Support from Oracle.
  We can use: adopted phase = apply restart no = no = yes patches abandonment = 20592764

  Please suggest how to proceed with patching. Now we're stuck.

  Concerning

  Purnima Johari

  I suggest you start with the next patch using the 'abandonment = yes"parameter.

  It seems that I forgot to mention that in my previous post!

  Furthermore, why apply AD. Delta.6 instead of delta.5?

  Kind regards

  Bashar

• JSF keeps displaying the old values after the failure of the Validation Phase

  Hi all
  I would like to ask for help to understand a given behavior that JSF indicates that the Phase of Validation fails.
  I use:
  
  -Tomcat 7.0.2
  -JSF 1.2_12
  -RichFaces 3.3.3
  
  Description of the problem.
  I wrote a form with input fields 4: an inputText and selectOneMenu 3. There the inputText while the selectOneMenus require no validation.
  Attached to the first selectOneMenu (line 32) is an a4j tag: support, so that, whenever the change event is triggered, the list of items of the second
  and the third (line 44 and 58) selectOneMenu are filled correctly (note that the agent of the inputText is ignored with the ajaxSingle attribute).
  In particular, after the loading of two lists of items, the actionListener requires the value of the second and the third selectOneMenu null.
  This mechanism seems to work fine until I submit the entire form without completing the text entry: as expected, JSF validation fails but if I change the value of
  the first selectOneMenu again (causing a new submission), page guard showing the specified values before JSF validation failed for the second and third
  selectOneMenu (note that the actionListener is still called and the values of the second and the third selectOneMenu are always forced to null).
  
  Since I'm on a simple PhaseListener, I noticed the following: before JSF validation fails, whenever I change the value of the first selectOneMenu, life JSF
  cycle always calls the get method for the second and the third selectOneMenu during the Render response Phase. In this way, JSF is able to 'see' that
  These values have been set to null in the appeal Phase.
  After the validation failure, JSF stop to call these getters when I change the value of the first selectOneMenu.
  
  I hope that my explanation was clear enough, thank you very much for your help.
  
  Kind regards
  Nico
  
  Web page

  <?xml version='1.0' encoding='UTF-8' ?> 
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" 
                        "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml"
        xmlns:f="http://java.sun.com/jsf/core"
        xmlns:h="http://java.sun.com/jsf/html"
        xmlns:a4j="http://richfaces.org/a4j"
        xmlns:rich="http://richfaces.org/rich">
  
  <head>
    <title>Prove Rich</title>
  </head>
  
  <body>
  
    <h2>Prove Rich</h2>
    
    <f:view>
    
    <a4j:outputPanel ajaxRendered="true">
      <h:messages style="color:red" />
    </a4j:outputPanel>
    
    <h:form>
    
    <p>
       Input required: <h:inputText value="#{provaProbReplyBean.inputRequired}" required="true" />
    </p>
    
    <p>
         <h:outputText value="Scegli il canale:" />
         <h:selectOneMenu value="#{provaProbReplyBean.canale}">
       
          <f:selectItem itemLabel="--" itemValue="" />
          <f:selectItem itemLabel="Profamily" itemValue="Profamily" />
          <f:selectItem itemLabel="Captive" itemValue="Captive" />
          
          <a4j:support event="onchange" action="#{provaProbReplyBean.caricaProcBanche}"
                                ajaxSingle="true" reRender="procedure, banche" />
       </h:selectOneMenu>
    </p>
    
    <p>
         <h:outputText value="Scegli la procedura:" />
         <h:selectOneMenu id="procedure" value="#{provaProbReplyBean.procedura}">
       
          <f:selectItem itemLabel="--" itemValue="" />
       
          <f:selectItems value="#{provaProbReplyBean.procedureList}" />
          
          <!-- immediately save the current value -->
          <a4j:support event="onchange" ajaxSingle="true" />
          
       </h:selectOneMenu>
    </p>
    
    <p>
         <h:outputText value="Scegli la banca:" />
         <h:selectOneMenu id="banche" value="#{provaProbReplyBean.banca}">
       
          <f:selectItem itemLabel="--" itemValue="" />
       
          <f:selectItems value="#{provaProbReplyBean.bancheList}" />
          
          <!-- immediately save the current value -->
          <a4j:support event="onchange" ajaxSingle="true" />
          
       </h:selectOneMenu>
    </p>
    
    <p><h:commandButton value="Submit" /></p>
    
    </h:form>
    
    </f:view>
    
  </body>
  
  </html>

  Bean

  public class ProvaProbReply {
  
       private String inputRequired;
  
       private String canale;
       private String procedura;
       private String banca;
       
       private Map<String, List<SelectItem>> canaliProc = new HashMap<String, List<SelectItem>>();
       private Map<String, List<SelectItem>> canaliBanche = new HashMap<String, List<SelectItem>>();
       
       private List<SelectItem> procedureList = new ArrayList<SelectItem>();
       private List<SelectItem> bancheList = new ArrayList<SelectItem>();
       
       public ProvaProbReply() {
       
            List<SelectItem> l = new ArrayList<SelectItem>();
            l.add(new SelectItem("Cessione del quinto"));
            l.add(new SelectItem("Credito al consumo"));
            l.add(new SelectItem("Mutui"));
       
            canaliProc.put("Profamily", l);
            
            l = new ArrayList<SelectItem>();
            l.add(new SelectItem("Credito al consumo"));
            
            canaliProc.put("Captive", l);
            
            l = new ArrayList<SelectItem>();
            
            canaliBanche.put("Profamily", l);
            
            l = new ArrayList<SelectItem>();
            l.add(new SelectItem("BDL"));
            l.add(new SelectItem("BM"));
            l.add(new SelectItem("BPM"));
            l.add(new SelectItem("CRA"));
            
            canaliBanche.put("Captive", l);
       }
       
       public String getInputRequired() {
       
            return inputRequired;
       }
       
       public void setInputRequired(String ir) {
       
            inputRequired = ir;
       }
       
       public String getCanale() {
       
            return canale;
       }
       
       public void setCanale(String c) {
       
            canale = c;
       }
       
       public String getProcedura() {
       
            System.out.println("\ngetProcedura called\n");
            return procedura;
       }
       
       public void setProcedura(String p) {
       
            procedura = p;
       }
       
       public String getBanca() {
       
            System.out.println("\ngetBanca called\n");
            return banca;
       }
       
       public void setBanca(String b) {
       
            banca = b;
       }
       
       public List<SelectItem> getProcedureList() {
       
            return procedureList;
       }
       
       public List<SelectItem> getBancheList() {
       
            return bancheList;
       }
       
       public String caricaProcBanche() {
       
            System.out.println("\nListener called\n");
       
            procedureList.clear();
            bancheList.clear();
            
            if(canale != null && !canale.equals("")) {
            
                 procedureList.addAll(canaliProc.get(canale));
                 bancheList.addAll(canaliBanche.get(canale));
            }
       
            System.out.println("BEFORE setting:\n");
       
            System.out.println("\nProcedura: "+procedura+"\n");
            System.out.println("Banca: "+banca+"\n");
       
            procedura = null;
            banca = null;
       
            System.out.println("\n\n\nAFTER setting:\n");
       
            System.out.println("\nProcedura: "+procedura+"\n");
            System.out.println("Banca: "+banca+"\n");
       
            return "";
       }
  }

  Published by: 869000 on 14.05 giu-28-2011

  I think it has to do with the fact that the UIComponents use the localValue after the validation failure. This prevents values are overwritten when the re-rendering of the page, i.e. the entries keep the value defined by the user.

  The solution is to manipulate the components directly in the AJAX request, when the first drop down menu is changed. Use the binding attribute to place them in your beans and clear the value directly. In this way, that it won't matter that the expression is not evaluated.

• "Remove item after importation" of Photos is activate but failed to import! Both devices (iPhone and Macbook) have no pictures!

  I'm trying to import my photos iPhone Macbook pro, I activate the function "delete after import" photos.

  However, the process fails, and both devices have no pictures I selected.

  How could I come back all these pictures?

  This is exactly why it is not recommended to never delete after import: always wait at least a backup has not completed

  What happened exactly?

  Depending on what happened, you might be able to recover the photos by launching Photos while holding down command and iptin keys and repair the database - which does not then you will need recovery software as media recover http://freshcrop.com/photo-recovery/image-recovery-software-for-apple/

  LN

• BitLocker Drive preparation tool - fail

  Hello

  So, I try to activate bitlocker on my laptop drive encryption, which is already running Vista Ultimate x 86.  I was not initially intended, and I knew that if I wanted to later, I could allagedly use the Bitlocker Drive preparation tool, so I built it with a single partition.

  Now, I want to activate bitlocker, so I downloaded the drive preparation tool, but I when I run it, I get the following error:

  "The bitlocker Drive Preparation Tool cannot find a system of target drive.  You may need to manually prepare your drive for BitLocker. »

  So I search and find this article kb http://support.microsoft.com/kb/933246

  I tried to manually specify the system drive by running the command line: ' BdeHdCfg.exe - target: shrink - newdriveletter x: - size 1500-quiet - restart ", but she just runs for a few seconds and then returns to the command prompt, so I check the event log and find an entry under the logs event observer, applications and services, Microsoft, Bitlocker DrivePreparationTool, Admin and found events (event error 1 id) similar to what I saw in the GUI of not find a system drive.  Under the operational event folder, I found event ID 4104, "a volume did not meet the requirements for a target volume. Volume: C: reason: impossible to reduce the target volume of the requested size. "

  So in the above article, my error message with certain proposed resolutions: "temporarily disable the hibernation option and disk paging. Then, use the Windows preinstallation environment to remove the file Hiberfil.sys and Pagefile.sys file. Restart the computer in Windows Vista. Then run the BitLocker Drive preparation tool. "OR"reinstall Windows Vista. »

  So of course, I tried the first suggestion, disabling hibernation using "powercfg-h" off and delete the hiberfil.sys file, disabled a swap under System properties file and deleted the "pagefile.sys" and restarted.

  Always the same error :(

  Is the second action plan 'Reinstall Windows Vista' serious?  I want to activate the drive encryption, should not be this hard.  I don't think that requiring people to reinstall just because an application cannot function in a reasonable way to be an excuse...

  Hi benneh,.

  In the article you posted there are two different scenarios listed that could cause the error message:

  "The bitlocker Drive Preparation Tool cannot find a system of target drive.  You may need to manually prepare your drive for BitLocker. »

  In your post you referenced scenario 2 and the steps you took to solve it, but you reference scenario1 which is as follows:

  Scenario 1: You do not have enough free disk space to "at least 10 percent of the active partition must remain free after the partition size is reduced by 1.5 gigabytes (GB). To resolve this error, move the files to another partition or delete files. »

  Just to be sure that it is not the reason for your question; After subtracting the reduction in size of 1.5 GB for your total hard drive space always need it the 10 percent of free space on the active partition?  Please let us know.  Thank you.
  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Center extender on my XBOX works initially, but not after reboot of my XBOX. Error: Failed to connect to the Xbox 360 could not connect to the windows Media Center computer.

  It's VERY odd and very annoying!

  I set up my laptop next to my Xbox 360 with an Ethernet cable directly connecting the laptop to the XBOX, and the laptop is on our wireless network. The XBOX has access to the internet (shared through the laptop), and when I test the PC connection and the connection XBOX Live sound fine to all.

  So I'll try to set up Windows Media Center, it works great! I "Add Extender", put the code to 8 digits. It passes through the installation, all works, no problems and WMC opens on the XBOX, I can go into my library, watch movies etc... works great!

  However! As soon as I turn my XBOX off and back on, it will fail to connect to the WMC.

  He says his 'find Windows Media Center PC' which seems to work fine, it goes to the ' Windows Media Center loading screen "contact...". ", and after about 10 seconds, I get an error"failed to connect the Xbox 360 could not connect to windows Media Center PC. Make sure that the PC is turned on and connected to the network.

  I tried to configure the Extender repeatedly, whenever it works fine until I restart the XBOX... :/ - and its strange cause I still the internet connection (shared through the laptop) after turning on the XBOX, its really JUST Media Center which is screwing around.

  She continues to keep trying to connect then repeatedly fails.

  If I wanted to, I could re-configuration the WMC Extender EVERY TIME turn off the Xbox, which works the first time without fault, but that's all just stupid.

  I can't really understand what is happening here... any help would be appreciated.

  Hello

  Refer the article that could help you solve this problem.
  http://support.Microsoft.com/kb/932163

• After that Windows Update installation, some programs fail to open but take up to 25% of the CPU usage

  Hi I have a HP Probook 6470 b. After installation of the latest series of Windows updates my laptop fails to open the common programs such as Word 2010, Adobe Acrobat Pro and Internet Explorer 11. Other programs such as Excel 2010 and Chrome are not affected. Programs not just open, but on the control task manager, they are each taking up 25% CPU, which is the set of core.

  Strangely, on a machine identical to the work occurs the same problem but on a desktop computer, I can't reproduce the problem. With my laptop I use system restore and the problem goes away until Windows Update to run again - there are quite a few updates and I can't identify what the source of the problem.

  Everyone knows about this problem?

  Hello. In the end, I managed to get out. It was Microsoft EMET that was causing problems. Ultimately I unchecked all boxes and now all my programs work correctly. Strangely Chrome and Excel have been unchecked already which is the reason for which they worked.