After disconnecting device USB to the laptop on Vista, now does not arrested

Similar Questions

• Upgrade the Firmware configuration page now does not open

  I have problems with the speed between 30-58 Kbps when going through the WRT160N router, if its high hook wired or wireless, with the two speed was extremely slow and does not entirely pager or would take dsl slow day. I hooked directly to the modem and I got 100 + kbps so I thought that its not my ISP, so I read that update my firmware could make it faster, so I updated and hit and held the reset button for 30 seconds as recommended, but now the 192.168.1.1 does not open, I get a message saying that it can't open this page any suggestions?

  You are able to go online through it? Try opening a command prompt and "ping 192.168.1.1" just to see if you can still get there.

• -HP Mini 110-1025DX closed by itself while downloading the BIOS driver and now does not turn

  I have reintalled windows xp then download, audio driver gave error when downloading and I read on the internet that unless I have download BIOS, she held in error, so I downloaded "WinFlash for HP NetBook system BIOS - Microsoft Windows-Based" and while it was installing I did something else, and when returned, not e book had closed and now does not turn.

  the specifications are also less

  -HP Mini 110-1025DX PC
  Serial number: CNU9316D45
  Product number: VA723UA -.
  Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025 - 1629)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Mini 110-1000
  BIOS: KBC Version 02.0 B
  Processor: Intel (r) CPU Atom N270 @ 1.60 GHz (2 CPUs)
  Memory: RAM 1016MB
  Page file: 514MB used, 1927 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.5512 32 bit Unicode

  What should I do?        Thank you

  It won't turn? The lights come?

  Let's first, remove the battery and unplug the power adapter and leave without electricity for a minute... then reconnect and see if it is eaten on.

• When my laptop battery died the printer stopped working, now does not start

  The laptop screen went black, (while a print job is in progress) I plugged in and restarted the computer.  Since that time there no task sent to this printer have been achieved. I had to go back to my old HP882C just plugged into the 2side Print Setup and finished work. HP C5580 had a task that will be

  not only cancel all print always not that hell has happened?

  Hello

  I suspect that when the battery is dead, the spooler has been altered.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

• You need to restore my pc to factory settings after that the virus, however the CD/DVD drive now does not work.

  The initial virus was system tool.

  Using Vista.

  I think I was using Roxio (?), who was initially charged but it shows is no longer on the screen.

  Several CDs have been inserted, but the reader is not grateful their.

  Difficulty completing it uninstalled the driver and let the system to 'find' it.

  Hello

  After a reinstall ensure that you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

• after update to FF, all the sites say "this website does not provide identity information" - why?

  previous versions of firefox showed the firefox logo or the logo of the company on the left of the address. There is now a gray on the globe. is it safe to use and how do I fix this?

  You will only see the information if there is a secure connection HTTPS.

  • https://support.Mozilla.org/KB/site+identity+button
  • http://blog.Mozilla.org/UX/2012/06/site-identity-UI-updates/

• What to do with my computer laptop windows vista which does not start? He gets a screen before before her windows error recovery screen restarts.

  Tittle says it all, I tried safe mode and the rest of them, but I can't start

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Using the smart tools button now does not work to search for images via Firefox

  I use Firefox version 17. It is a new problem. I was using google search.

  What is a button on a web page or a button provided by an extension?

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• USB on the laptop does not read anything that is connected to them

  USB on the computer laptop does'nt read whatever it is connected to them. For example, I plug the mouse, the light on the mouse turns on but does not move, Device Manager does not read install is not reading .What do that?  Laptop is hp athlon.

  Hello

  See the link below:
  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive:
  http://support.Microsoft.com/kb/925196
  Let us know if that helps.

• Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

  I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

  I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

  She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

  Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

  Connect the external monitor to the laptop.

  Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

• Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Hello team,

  Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Thanks for help

  LookAtLAN network monitoring is one of these tools.

  SuperScan is probably better, but I have not tried.

• My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Tuesday, July 17, 2012, 10:53:01 + 0000, JonathenHarmon wrote:

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Of course, it sounds like a hardware problem, not a a Windows.
  Contact Acer for repair.

  Ken Blake, Microsoft MVP

• Laptop running Windows 7 does not start if the external hard drive is connected

  I know what is already on a thread, but here it is again (i.e. thread became uncontrollable anyway and did not offer me solutions). I have an ASUS K53S laptop computer Series and use it as a desktop PC. It sits on my desk and never move, I plugged my larger screen, a keyboard and mouse, printer and external hard drive that I keep all my information on i rarely save to local disk. These things represent more than ports USB to the laptop, I have a hub 4 ports on there also. It is just background information; I mean, the laptop is a must.

  Here's the problem: when I start, as I do every morning, I used to see ASUS inspire Innovation - first of all, persistent Perfection for about 1 second, then the laptop will just get on the job and complete its start-up in about a minute (including login). Which was very good until a few days ago when things started slows down a bit, then I rebooted as I always used to with my Windows XP tour. All closed but return is reactivated and it hung on the opening screen of ASUS and show no signs of getting further. I went outside and continued on another work that does not need a computer, thinking that if I ignored it it would be bit go further, but I came back hours later to find that it is always locked.
  Well after a little, I took the plug my external hard drive, and he continued to start where he left off, like nothing had happened.
  This settled this possibility, but before that, I had established a thing; I need to connect my external hard drive before starting, otherwise it wouldn't connect properly.
  When I managed to finally get both going at the same time (Yes, after some persistence, he recognized the drive but I still would like a solution to this when it exists), I looked at the hard drive and all my files are corrupted or something. photos are not valid, some files that I know to have files in appear them as empty and I can't make any sense at all. Is there someone out there who has had this problem before and fixed, and if so, how?
  My external hard drive is a Seagate 1 TB, if it helps.
  I really want an answer to this, I have data on that disc that I need and I'm not.

  If the problem affects only one PC it says its something specific to this PC.

  Is there traces of yellow warning in Device Manager?

  At whatever it is updated / installed on this PC before this problem, or run a maintenance utility?

  If there is no warning of the Device Manager, then if you perform a clean boot PC http://support.microsoft.com/kb/331796 NB this isn't the manual method the Fixit which helps?

• After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

  After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

  Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

  10. restart once again & test.

  NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• R400 - internet stops working after 2 min. Since the start of Vista

  Hello
  My new ThnkPad R400 with Vista, I have a problem with the automatic connection to the WiFi network. In the Access Connections software, I put my home wireless network. When I turn on computer and access the internet, it's ok, but after about 2 minutes since the start of Vista, the internet stops working. Ping is still OK for each site (google.com, yahoo.com...), but I can't open any website. When I disconnect and then connect to the network, its straight until the next time the computer starts.

  I'm very anxious, I tried to fix a lot of hours, but nothing helped.

  You have any ideas?

  Thank you.

  I solved my connection drop problem! I've updated the Wi - Fi drivers and now everything is OK.

  Full instructions are here: http://forum.thinkpads.com/viewtopic.php?p=471886#p471886