When my laptop battery died the printer stopped working, now does not start

Similar Questions

• a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3

  a pc that is sharing the printer and another pc does not accept the same network printer on xp pro sp3
  What is the solution?

  Check out these links

  http://TechNet.Microsoft.com/en-us/library/bb457001.aspx

  http://UIs.Georgetown.edu/software/documentation/WinXP/WinXP.network.printer.html

• 6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  My computer is a PC with Windows 10.
  Everything worked well before the Update Adobe Lightroom 6.
  The software was purchased in a shop (FNAC) with software to download map, it is saved in my account (Adobe) with its serial number. Why is this so difficult thing to reinstall Adobe software?
  

  
  

  I apologize for the inconvenience.

  Since it appears and disappears from the Task Manager, it seems that Lightroom crashes.

  We have seen this kind of problem on Windows 10 when Visual C++ Reditsributable 2012 update 4 is not installed correctly, it is necessary to run certain programs. You might have encountered until now Adobe programs that require it.

  Otherwise, there could be another cause of this accident and if C++ installation does not help, then you need to share the event viewer crash logs. See this article for in crash logs: Photoshop Elements Editor Help. How to find the crash logs on to Windows

• -HP Mini 110-1025DX closed by itself while downloading the BIOS driver and now does not turn

  I have reintalled windows xp then download, audio driver gave error when downloading and I read on the internet that unless I have download BIOS, she held in error, so I downloaded "WinFlash for HP NetBook system BIOS - Microsoft Windows-Based" and while it was installing I did something else, and when returned, not e book had closed and now does not turn.

  the specifications are also less

  -HP Mini 110-1025DX PC
  Serial number: CNU9316D45
  Product number: VA723UA -.
  Operating system: Windows XP Home Edition (5.1, Build 2600) Service Pack 3 (2600.xpsp_sp3_gdr.111025 - 1629)
  Language: English (regional setting: English)
  Manufacturer: Hewlett-Packard
  Model: HP Mini 110-1000
  BIOS: KBC Version 02.0 B
  Processor: Intel (r) CPU Atom N270 @ 1.60 GHz (2 CPUs)
  Memory: RAM 1016MB
  Page file: 514MB used, 1927 MB of available space
  Windows Dir: C:\WINDOWS
  DirectX version: DirectX 9 .0c (4.09.0000.0904)
  DX setup parameters: not found
  DxDiag Version: 5.03.2600.5512 32 bit Unicode

  What should I do?        Thank you

  It won't turn? The lights come?

  Let's first, remove the battery and unplug the power adapter and leave without electricity for a minute... then reconnect and see if it is eaten on.

• 12 c on the repository server management agent does not start due to a failure of the system

  My environment architecture for 12 c Cloud Control (used for the purpose of personal practice) can be explained as follows:

  @DBSERVER: (OEL6.5, x 86-64)

  -12 c Enterprise Manager Cloud Control (EMCC)

  -Database 11.2.0.4 which acts as a repository for 12 c EMCC

  Monitored host is on a virtual machine (VM12) which is currently in the DBSERVER:

  VM12: (OEL6.5, x 86-64)

  -12 c Management Agent which monitors host and database (12.1.0.1)

  The server worked fine for months until recently when the computer has restarted abruptly. Abrupt restart has occurred several times in the past, but this time, he had a problem when restarting. The DBSERVER when a startup starts the SGC and the AGENT. WHO starts perfectly, but the AGENT does not start. On trying to start the agent, it displays the following error message:

  [orcl11204g@dbserver bin] $. / emctl start agent

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Starting Agent... failed.

  Manager of target failed to startup: targets.xml was rejected: loaded with a token incorrect agent

  See emctl.log and emagent.nohup in: / home/u01/oemrel3/agent/agent_inst/sysman/log

  [orcl11204g@dbserver bin] $

  The targets.xml file contains the following information, which do not seem to be of any help:

  [orcl11204g@dbserver emd] $ cat targets.xml

  <? XML version = "1.0"? >

  <>targets

  < / objectives >

  [orcl11204g@dbserver emd] $

  Anyone can provide assistance in such circumstances?

  The DBSERVER repository database, the auditor and the who are running, while the agent is down. VM12, listener and agent database is running. Is there another file that should be checked for more information?

  --> $/ AGENT_INST/bin/emctl stop agent

  If the agent does not stop is free then kill all the background process agent first grepping for agent perl and java process only

  --> Move your existing target.xml file

  MV target.xml target.xml.old

  --> Create an empty file targets.xml under/AGENT_INST/sysman/MDTs with the below content

  --> Start the agent of

  $AGENT_INST/bin/emctl start agent

  That starts agent but without all the targets in targets.xml

  To the discovery of targets saw agent console resynchronization

  Concerning

  Krishnan

• The Eagletree data logger program does not start

  After downloading the software from version 9.13 recorder data (see [http://www.eagletreesystems.com/Support/apps.htm]) on my computer with OS Windows 7 Professional, the program does not start.
  Also try different compatibility settings does not solve the problem.

  An earlier version of the same program open normally, and also on the computer of a friend with Windows 7 there is no problem.

  Someone has any idea how to solve this problem?

  MAYDAY and greetings,

  Eddy

  Hello

  I'm a little confused about your ad Mr. Why ask you this question here?

  Here he s a user to Toshiba user forum where people can discuss on laptops Toshiba and Toshiba software, drivers, etc., but this data logger has nothing to do with Toshiba.

  In this case you must contact directly to the manufacture of the data logger. Guys have to know what you have to do to make it work.
  ?

• Upgrade the Firmware configuration page now does not open

  I have problems with the speed between 30-58 Kbps when going through the WRT160N router, if its high hook wired or wireless, with the two speed was extremely slow and does not entirely pager or would take dsl slow day. I hooked directly to the modem and I got 100 + kbps so I thought that its not my ISP, so I read that update my firmware could make it faster, so I updated and hit and held the reset button for 30 seconds as recommended, but now the 192.168.1.1 does not open, I get a message saying that it can't open this page any suggestions?

  You are able to go online through it? Try opening a command prompt and "ping 192.168.1.1" just to see if you can still get there.

• Why the cd dvd burner motor does not start but will start to manual

  I have a E-Machines, does not start Windows Vista Home Premium 32-Bit, Windows media player or no matter what dvd burner

  Hello

  1. it worked earlier? If so, remember you have changed your computer?

  2. what happens when you insert a CD or a DVD?

  Run the fixit from this link to activate autorun and check to see if this helps: How to disable the functionality of Windows Autorun http://support.microsoft.com/kb/967715

  Note: click the fixit to activate autorun.

• Need help, use the control Timer my application does not start

  Hello guys

  I have problems, follow the example signals and Slots, but when my application is running, it does not start.

  If I delete all the code that deals with the Timer control, it's working again, my theory is that the CustomTimer library does not stunts

  Can you help me?

  Thank you very much

  My guess is many people have followed this during the first startup, I certainly did and it worked for me.

  It's probably something simple, missed, without seeing your code it's going to be difficult to diagnose.

  My first advice is always to check the log and see if messages are coming that may be related.

• Add the new hard drive, windows does not start now

  OK, ill be as specific as possible here

  Ive always had a few hard drives in my computer at all times

  A few days ago, I had problems with my windows 7 install that I tabled to the installation while I had all of my hard drives connected at installation time.

  2 days ago I decided to start over fresh with a windows 7 ultimate 64-bit. I also bought a new 64gig OCZ SSD for my OS.

  I disconnected all my drives except the SSD and performed a complete installation of windows 7 and all a well worked first go again.
  I then started to shut down my computer and adding a hard drive to the times and re starting and in ensuring that the drive letters came back how I got them I had on my previous built and changing them were nessisary.

  I installed my 5 drives in this case and the computer rebooted fine and everything was perfect until!

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4. 320 GB movies
  5. 320 GB games

  I copied all HDD 4. movies (only movies and music files) on disk 3.
  then I removed the hard drive of 4 and replaced by a new hard disk 1.5 TB and restarted the computer
  the computer starts very well and once loaded windows I coppied the movies and music of the new 1.5 TB hard drive back.

  now, I had

  installed hard drives
  1 SSD 64 GB
  2. 1.5 TB of storage
  3. 1.5 TB of storage
  4 movies 1.5 to
  5. 320 GB games

  This is were the problem started. I restarted my computer and it wouldn't start. He gets the message of realteck and just a cursor flashes and remains like that permanently.

  If I remove the sata cable to the back of the hard disc 4 the computer starts fine
  I can plug the cable in just before the windows screen comes up and the hard drive works fine and is FLEURIDAS and all.
  but leave it plugged during the start of what the computer does nothing

  things I've tried, I made sure all my boot priorities are pointing to the SSD drive
  I have turned all devices normal priming and the hard drive with the OS selected
  Ive made sure that all the drive letters are correct on each drive
  Ive tried to get started with the windows 7 CD to get to the repair section and I click Repair tool, start it recconises there is a problem but informs me it can not be fixed automatically and asks me if I want to send the information to microsoft (which me).

  It's really made me this one any help will be great and thanks in advance

  just in case sick leave my system specs

  EVGA X 58 mobo
  INTEL Core i7 940
  6 GB of corsair ram
  all hard drives, you know
  1000 watt power supply
  2 X PALIT GTX 295 but SLI is not currently connected

  Hi AUST_DeVinE,

  ·         Please give us the exact error that you receive when you plug the SATA cable?

  ·         After you connect the hard drive, are you able to boot in safe mode?

  Check if you are able to boot in safe mode. Link: start your computer in safe mode:

        http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  1. run chkdsk on this hard drive, follow the steps below and check, if it helps:

  i. connect the external hard drive

  II. starting the computer in the Windows recovery environment, you can check the link below: What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  III. run Chkdsk,

  Here are the steps to run chkdsk:

  i. in the command prompt window, type the following command and press enter Chkdsk/r X:

  II. Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.

  III. o press when you are prompted to check the drive the next time the system restarts.

  IV. restart the computer.

  Note: When you restart, Windows checks the drive for errors, and then Windows starts.

  Link, please refer to: Chkdsk: http://technet.microsoft.com/en-us/library/cc730714 (WS.10) .aspx 

  2. you can even format the hard drive and check if this can help, see the below link for the same: Formatting disks and drives: frequently asked questions: http://windows.microsoft.com/en-US/windows7/Formatting-disks-and-drives-frequently-asked-questions

  3 make sure you check the firmware updates and the updates of the system BIOS

  For updates and updates the system BIOS, contact the manufacturer of the hardware in the computer, refer to the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us 

  Not even verify that the system BIOS correctly detects the hard disk

  For more information about how to verify that the system BIOS correctly detects the hard disk, contact the manufacturer of the computer hardware.

  BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After the motherboard replacement Tecra S2 does not start

  Hello

  I replaced the motherboard in my Tecra S2 and now it does not start, the power light is on but nothing on the screen. I can hear the h/d running DVD lights.
  I tried to remove the RAM.
  Also checked the CPU and still nothing.

  NEED HELP.

  Are you sure that the display is OK and correctly connected?
  Is busy, I mean drive HARD HDD LED flashes?

• Hung HP during the update of Windows. Does not start.

  HP woman desktop computer apparently hung during a Windows Update. A few hours later, she she turned off.  Now it does not start until after the blue HP screen.  I tried to boot from a backup CD, but nogo.  Cannot do anything on the blue HP screen (boot, diagnostics, etc.).  What are my options for the system restore?

  Thank you

  Doug Baumann

  {Information}

  Shut down the system. Just unplug the tower including the power cord. Press and hold the power for 10 seconds. Reconnect the monitor, keyboard, mouse, & power. Make sure that there is no cd/dvd in the drive.

  Restart the system by pressing F8

  You should get a screen that has advanced startup options

  Select "last known good configuration".

• Update the BIOS Alienware x 51 does not start

  After the BIOS level and rebooted the system, now it seems changed the configuration of startup and 10 Windows does not start.

  I checked the boot options and saw that one selected is now Legacy of start and it seems that Windows 10 works with UEFI.

  Should what boot option I set by default in the BIOS so that window 10 restarts automatically?

  Any help would be apreciated.

  Hello

  Boot option should be UEFI. Disable secure boot, and then on the Advanced tab > Integrated devices: change SATA AHCI mode.

  If the problem persists, press F9 to return to the default settings.

  Let me know how it goes!

• the inventory of VMware service does not start, the wrong function, bad sql server port

  I've migrated vcenter SQL database to a new server after this KB

  https://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 7960893

  but now most of the vcenter services does not start cause of according to the inventory service.  I see service log of inventory which is the problem, it tries to connect to SQL Server by default, 1433 port, but my SQL server instance is listening on a different fixed port, I don't want to change.  Where can I configure the inventory service we another port of SQL Server?  According to a KB related to the above, it is possible to do

  https://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 2033516

  but unfortunately I have vcenter 6 and the instructions above do not seem to apply, I can't even find ssocli, the mentioned folder structure does not exist on my installation

  
  Thank you.

  I solved this.  Despite what has been reported in the newspaper the issue was not the port.  The new database is a named instance, the connection string for vcdb.properties, he entered as the server name = hostname\instancename in fact, it is necessary to use two slashes return hostname\\instancename :-/

• Network printer printing not worked when I was connected to Comcast. I switched to ATT Uverse and the printer stop working

  I recently spent for my internet service Comcast Xfinity to ATT Uverse.  I have a printer wireless hp3100.  The printer works on Comcast internet, but does not work with Uverse internet.  I know that there must be a way to solve this problem, but I can't understand it.

  I expect that ATT is using a different range of intellectual property. Consult the documentation for the printer on how to change the IP address of the printer.