After disconnection of the ACL AnyConnect not honored on ISA550W
Once I have disconnect a session SSL - VPN (AnyConnect), the firewall blocks WAN > LAN traffic. I navigate to the firewall > access control > rules ACL page and click on the Reset button for the ISA550W to honor the rules.
Hi Eric,.
Thanks for providing this information. We have been able to reproduce it here. You can open a case with HWC so we can work on that with you?
Let me know if you have problems opening a case with HWC.
Thank you
Brandon
Tags: Cisco Support
Similar Questions
-
Reconstruction of recent software with HARD drive internal extra (March 2011) under Windows XP/Linux dual-boot installation worked fine. CD/DVD RW drive, started giving errors so replaced cyclic redundancy check drive a week ago. All still OK. Change of electricity supplied and increases energy use conciousness off the machine to the outlet of the overnight after normal shut down. Machine will not re-start not in the morning. Not load BIOS; all lights came briefly and then die after 3-4 seconds with power still led on. You can get a similar effect by plugging the keyboard into the PS2 Mouse Jack I did once!
After 20 minutes or so try all kinds of things managed to boot from the CD of Linux. Shut down/restarted and everything is fine so I don't switch off at the wall. Also seems to be OK after brief power off for 5-10 seconds but the problem persists with any long disconnection. It seems that after 10 to 15 minutes from power-on and 2-3 attempts to restart, BIOS comes up and all is well, but he stopped in the middle of a start of Windows or Linux on a couple of occasions.
Am I right in thinking the problem might be the result of a dead CMOS battery? The reason that I ask is that the clock seems to keep time OK and there is no apparent problem with the BIOS once it loads.
Any help/advice would be much appreciated. New config info below.
Dual boot Windows XP Pro SP3 of Compaq Presario Bios v3.03 S4500UK / Linux Ubuntu 10.04 Lucid (2.6.32 - 33)
Drive HARD 120 GB (original Seagate Barracuda 7200) Master Boot Record, Partition Table, Windows XP, Linux, Swapfile etc.
500 GB Western Digital Caviar Blue (encrypted)
CD/DVD-ROM (original JLMS XJ-HD166S)
Recently installed HL-DT-ST DVD - RAM GH22NP21 replacement NEC ND - 1100
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
I don't have all the answers so I went forward with replacing the CMOS battery, but that did not help. The problem is also obvious if I turn it off and leave it for an hour or more before trying to restart even if I do not unplug the wall plug. It seems to take about 15-20 will start again before it fires. I would be really grateful for any clues as to what is wrong.
TKS
JG1
OK, guys. I finally solved the problem.
After you have calculated the power needed for the config curent, I discovered that, using various ways to estimate, he walked between 321W - 383W. It was pretty weird that the only thing I added was a HARD drive and a memory stick and the wisdom of the other guys on this forum, it's that there is a lot of capacity within the factory installed power of 250W. Yes and here's the rub: the modern replacement devices usually have upgraded capabilities and use more power. And so when I replaced the drive CD/DVD RW added a few watts, as the sectoral approach of the floppy drive. It appears also that the optical USB mouse needs more juice than the good old PS2.
I just installed a new 450W PSU Powercool and Bingo! The processor is faster, too.
Hope that my pain and trauma saves someone else having to suffer the same.
JG1
-
How to keep passwords to be deleted after disconnection of the Firefox Sync?
Recently reinstalled Windows and Sync used to migrate all data. After disconnecting the synchronization, all saved passwords have been removed. Is it possible to keep them without being connected to Sync?
Which is kinda weird.
Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:
- chrome://pippki/content/exceptionDialog.XUL
In the field location type and paste the URL of the Web site
- retrieve the certificate via the button 'Get certificate '.
- inspect the certificate via the "view..." button. »
Make a check of malware with several malware scanning of programs on the Windows computer.
Please scan with all programs, because each program detects a different malicious program.
All of these programs have free versions.Make sure that you update each program to get the latest version of their databases before scanning.
- Malwarebytes' Anti-Malware:
http://www.Malwarebytes.org/MBAM.php - AdwCleaner:
http://www.bleepingcomputer.com/download/adwcleaner/
http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml - SuperAntispyware:
http://www.SUPERAntiSpyware.com/ - Microsoft security scanner:
http://www.Microsoft.com/security/scanner/en-us/default.aspx - Windows Defender:
http://Windows.Microsoft.com/en-us/Windows/using-Defender - Spybot Search & Destroy:
http://www.safer-networking.org/en/index.html - Kasperky free Security Scan:
http://www.Kaspersky.com/security-scan
Alternatively, you can write a check for an infection rootkit TDSSKiller.
- Utility anti-rootkit TDSSKiller:
http://support.Kaspersky.com/5350?El=88446
See also:
-
After restart of the cc does not start
Hello
on iMac27 with OS X Yosemite. After each restart creative cloud does not start. I must force "reboot several times for throwing.
Any suggestions?
Thank you
Enrico
Hi Enrico,.
Please try the below steps mentioned and see if it works.
1. open Activity Monitor
2 search for Adobe related process (Creative cloud, coresync, AAMnotifire/updater)
3 - put an end to all Services from Adobe
4 restart the computer, try to run.
Cleaning tool allows you to delete the corrupted files creative cloud and reinstall it.
- Removal tool: https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
- Installer: creative cloud help | Download, install, update or uninstall applications
If you still find the same behavior, please try to create a new admin account and try to run to this user account.
Thank you
Atul Saini
-
After upgrading RAM, the screen does not work on Satellite L30 - 105
Dial up on laptop and screen does not work. Have updated the memory to 2 GB.
This can be the reason of the screen works not? Have tried rebooting the system, but it helps t n.Hello
Can you please tell us which laptop model you have? Have you noticed the same problem until you do RAM upgrade?
What's on the new RAM? Did you buy a compatible? -
setting up time capsule and express wired after disconnection of the airport
I have a 2 TB Time Capsule and three 3 wired express airport throughout my house. I know that when I added first the cable express, that I had to call apple to change some settings. Now I can't service because they are more than a year and after a recent quick breakdown (two or three) power is the airport expresses link is more and a bunch of my settings seem to have changed on the Time Capsule. Any help would be greatly appreciated. Thank you
If you think there are setting changes, then it would be better to start over.
- First of all, you want to make a 'factory' reset on all of your base stations. This will return them to their "out-of-the-box" configuration Once finished, leave them turned off.
- Then, we put up the Time Capsule (TC). Since it has been reset, it will broadcast a Wi - Fi unsecured network with a network name of something like: Apple network NNNNNN.
- Use AirPort Utility on your iPhone, Mac or PC to configure the TC as a stand-alone wireless router. In other words, configure it to provide a secure WiFi network.
- Once the TC has been configured, verify that the clients on your network can access the Internet with it.
- If he succeeds, proceed to the next step. If this is not the case, stop and post back with your results.
- We will now configure all of your base stations for a roaming network.
- Power-up one of the three stations based AirPort Express.
- Once again, you will need to use AirPort Utility to continue. The utility must now find the Express, and if all goes well, it will offer to the Express allows to extend the TC using Ethernet. It's what you want and just go through the steps automated window 'Installation '. And then on actually.
- Do the same for the other two express base stations.
-
Lose "Desktops" after disconnection of the screen of the laptop
I have the strangest question that I can't seem to solve. We hope that you can show how the solution is right in front of me.
I have a Macbook Air, under OS X 10.11.4 I connect a widescreen Apple when I'm at my desk. Through Mission control, I have "Screens have a separate space" checked so that I can use the split screen function. Throughout my work day, I always use my laptop screen and screen more great for a variety of tasks. Well, when I unplug my laptop on the big screen and then try to do a job of just my laptop, I can't find some open windows and applications. In fact, I can not even find 'Desktop 1' when I use the Mission control. It gives me 'Desktop 2' and the ability to add more posts to work. There has been moments that I can't find my open applications and windows anywhere. Sometimes I can get to them through the docking station. But even in this case, it's really awkward. Each time, I have to restart my computer and load new apps by scratch so much they are all together again.
What I'm doing wrong here? I think it has something to do with the help of each display as a separate space, but how should I manage my activity if so? I don't really like on displays with their own space, but I have to have this verified function if I use the split screen. I use this feature all the time so don't want to let go. Is there a way to consolidate computers to office/spaces after that I took off of the second monitor?
Anything you can help me with is appreciated.
James
Hi James,
I understand that you want to connect your MacBook Air to an Apple Thunderbolt display. When you say 'split', ask you to share your desktop on both screens? If so, you can configure the Thunderbolt as extended desktop display.
OS X El Capitan: connect multiple monitors to your Mac
Configure the screens as extended desktop
You can arrange your displays in all configurations to create an extended desktop. For example, you can set your screens side by side to create a large continuous desktop.
Choose the Apple menu > System Preferences, click view, and then click Arrangement.
Follow the instructions on the screen.
Take care
-
Loss of internet connection after sleep and the computer will not be closed.
I have a laptop GateWay w / Vista 32 bit OS. Recently connected to the new internet connection and can connect without a problem. However, after waking from sleep, the connection is lost, the icon indicates still active connection, can no longer open connection or the computer will restart. It just hangs and I have to make a hard stop and start again. If I remive the connection Wireless via safe mode things is back to normal. However, the cycle repeats when the connection is restored and the computer enters mode "Eve".
Hi bobert1953,
This problem can occur when the power management profile turns off your network adapter.
Method 1: To disable power management feature ent of network cards
a. click on start
b. right click on computer
c. click on manage the
d. click on Device Manager in the left pane of the window
e. expand your network card.
f. now you will see your network adapter or adapters if you have more than one. Right-click on the network component, and then click Properties.
g. go to the power management tab.
h. ensure that all check boxes are unchecked (check boxallow the computer to turn off this device to save power is off).
i. When you have disabled the boxes, click ok and restart your system. Put the computer in mode 'sleep' and check if you still have any questions.
Method 2: You're also talking about the steps mentioned in the article below, which deals with a similar question
After you wake up, a Windows Vista-based computer or a Windows 7 sleep mode or Hibernate computer, the network icon and the speaker in the notification area icon do not show the correct state
http://support.Microsoft.com/kb/937477
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
---------------------------------------------------------------------------------------------------------
Visit our Microsoft answers feedback Forum and let us know what you think. -
Roads remain in the routing table after disconnecting from the vpn client
I am facing this problem for my clients and the easy vpn server.
My Cisco 3825 has an easy vpn server configuration with an ip pool. When one of the customer disconnects and isakmp and ipsec his deleted by the router itself. The route pointing to the ip address of the ip pool is still in the routing table. This time, another vpn client connects and get the ip address of the ip even pool. But this new vpn client connected is located on a different interface of the router. Thus, an extreme problem happen! A route to 2 next hops is created! So bad!
Someone else can help me? How can I delete the wrong way?
Thank you!
Jason Lam
It can be useful to upgrade because he accompanied several questions IPP in earlier versions of the code with the roads not removed during the SA goes down, etc.
-
Dear community,
as I have already mentioned in the thread title, my screen will not turn after the passage in Tablet Mode. Also FN + F3 does not either. System update shows no other edits, but he seems to be in any case, tapped since im sure that it has not installed the tablet button driver.
I have a sweet Version of installed Windows 7, and before I start installing drivers hurt over and over again, im invite you you guys for help. Maybe you can tell me which driver I'm missing.
All the best,
Nik
Installed all the drivers of the matrix-driver manually, looks like it worked. System update however was the shit...
-
Equium A60 - after reinstalling XP the FN keys not working not
I'm completely lost as to the use of this site, but I don't know that I will be corrected.
I have a satellite AE60-199... PSA67E I reloaded with XP. The only thing that seems to not work is for example the function keys. FN + Esc to mute, etc. I tried to download on the site all kinds of archives, but nothing helped.
Can you tell me what particular progs I'm looking for? I loaded things like the hotkeys etc & it does not appear to have a common module so I'm stuck & stuffed.
Thank you in advance.
Hello
For the FN keys work you should install some application Toshiba in any particular order.
If you are looking for on the site of Toshiba Equium A60 to your Windows XP, you can find installation instructions document. Use this list as an order to install drivers recommend.The FN keys to Toshiba Hotkey Utility, Hotkey utilities and utility controls Toshiba.
Welcome them
-
I've already updated and download the patches to remove HP with Windows XP, I always get error messages about SQL writer indicating the library has been corrupted and reinsert it doesn't tell me which library or where it is located and all microsoft help doctor's visits did not solve the problem nor has take it to a computer fix place0 which was a waste of $100,00 ~!
Discs that I got for my computer does not appear in the shot and I have no way to fix my computer that I use for home based work.
Could someone finally help me before I throw this computer out the window? It was more expensive that it was supposed to for be to work online - incidentally does not have Norton antivirus to prevent viruses!
Hi Jen98051,
1. when exactly you get the error message?
2. What is the exact error message?We recommend that you restore the computer and check if the problem persists.
see How to restore Windows XP to a previous state .
b. Once you restore the computer to an earlier time, restart the computer and check the difference.If nothing works, then please provide us with more details on the issue, so that we can help you further.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
After restoration of the system, do not install programs or save passwords
Hi, I recently did a system recovery and now my pc won't install anything or remembering passwords, and my internet banking does not work anymore, what should I do?
I contact the computer manufacturer and ask them the correct way to reinstall vista back to factory settings.
Looks like something went wrong with the recovery process.
See you soon.
Mick Murphy - Microsoft partner
-
Error call FNDLOAD function even after you apply the 441783.1 Note * URGENT
I try upgraded to R12 from 11i server based on linux.
When American driver road running I get the error.
Hi crossed the note and I'm not able to find a directory such as mentioned in the /oracle/ example
I am able to find the 12.0.1 directory.
Please help me find the exact path where the symbolic link must be created.
Just to give u an idea of the file system
The battery technology is /u03.00/APPS/upg12/apps/tech_st
the top of the app is /u03.00/APPS/upg12/apps/apps_st/appl
Please help because it's urgentas a permanent solution, it has been mentioned to apply a patch that does not exist now-Patch '6272715 '.
Download (Patch 6510214 - R12. AD. A.Delta.4) instead.
Note: 465284.1 - software updates to Oracle Applications DBA, version R12. AD. A.DELTA.4
https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=465284.1 -
Why after I merge the HDR file not show in film
Why I have merged the new HDR file displays in the film
It works for me. The InfoBar above the film shows that you are in the folder that contains the original?
Maybe you are looking for
-
Value added package and touchpad driver for Linux
I need to value pack and a Synaptics touchpad driver and it should work on Ubuntu Linux. Where can I find it?
-
T410s overheated and now will not even POST
I was watching Wimbledon today and suddenly my computer off. Overheating because she was on the couch. Not much, I put on the coffee table and restarted. He went straight to the CHKDSK and then started to W7 without problem. But, even if he says that
-
Three weeks ago, I got a problem of compatibility with nero premium 7 that I installed it, so I had to remove my laptop with great difficulty! I tried restoring the system by removing, and it failed. Whenever I open the system restore, I get a messag
-
Z10 Z10 blackBerry speaker stuck
Z10 OZ Version 10.2.1.3247 Talk normally phone handset or via bluetooth. Speaker used today for what is perhaps the first time, and he's stuck there now. If I use the bluetooth it will run for a few minutes then randomly disconnect. I've tried reboot
-
seized correspondence interface card crypto
I wonder if I put the command 'ip nat outside' to my external interface required before entering the cryto entry card "card crypto map name of the command? concerning