Similar Questions

• File < unspecified file name > was not found.

  Hello

  Running ESXi 5.0 Update 1.

  I have a 8 VM version which is one of our two domain controllers, (Windows Server 2008 R2). It's storage room.

  I use ghettoVCB to save the virtual computer to NAS and I was trying to resolve why this particular virtual machine was not copying.

  I had SSH into the server and, thinking that I was in a different directory, files deleted. I was actually in the folder for the domain controller virtual machine. Of course, he could not remove all the files as they were in use.

  I've recreated the hard descriptor file using this link.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1002511

  When I rebooted the VM, the domain controller was riding without a network connection. I went to the settings and set it to the correct network, but he would never record and referred to the 'file < unspecified file name > is not found' error message.

  I'm done manually by modifying the .vmx file and changing the field "ethernet0.networkName" to the correct network. The virtual machine started correctly with a working NIC and everything is OK.

  However, if I need to change the settings for the virtual machine, I always get the 'file < unspecified file name > is not found' error message.

  I thought I'd create a new virtual machine with the same settings and adding the hard file.

  1. I am not confident in the correct to follow on that, track and
  2. I'm not so, because it is a domain controller, there will be bad consequences. I read somewhere that the UUID or something will be different and there could be network problems.

  Can anyone provide some tips?

  Thank you

  Steve.

  I suggest the following.

  (1) close the source VM

  (2) create a new virtual machine, and then modify it to remove (delete), this is a virtual hard drive.

  (3) copy the folder source VM virtual disk in the target VM folder.  In the console or via SSH, you can use vmkfstools for this operation.

  (4) to change the VM and add a new hard drive by using the use existing file"' option.

  (5) game of the virtual NETWORK card on the new VM to be disconnected.  Just in case the new VM is a screw up, it won't impact on the other DC.

  (6) move the virtual machine online and see how it works.  If it's good then you just need to connect the virtual NETWORK adapter and it connects to the power on the value.

• The following names are not found and cannot be added

  Hello

  I get this error "the following names are not found and cannot be added" when I tried to add newly created user for authorization of vCenter/group.

  I am using vCenter 4.1 with the guests of ESXi 4.1 & ESX4.1

  Time is synchronized with the ntp server in DC and vCenter & ESXi hosts.

  Any help to solve the problem?

  The problem caused by the AD domain and vcenter with the same sid, once change vcenter for a different sid, the problem has been resolved!

  How to change the SID on Windows 7 and Windows Server 2008 R2 using sysprep?

  http://www.Brajkovic.info/Windows-Server-2008/Windows-Server-2008-R2/how-to-change-SID-on-Windows-7-and-Windows-Server-2008-R2-using-Sysprep/

  You can download the PSGETSID

  Download tools named "PsGetSID" and make sure that your windows 2008 SID is not even. You can download it at the following ADDRESS:

  http://TechNet.Microsoft.com/en-us/Sysinternals/bb897417

  Thank you best regards &,.

  BSR Krishna

• Cannot change the files - &amp; quot; project not found &amp; quot; 404 error

  I followed all the instructions to create an editable region and save the site - everything works beautifully. However, when I click on the view/edit in the admin cpanel or command-E button when you view the page in a normal browser window it seems to process and then comes up with a 404 not found error.
  
  The page I'm trialing with it as:
  
  http://www.tuimotel.co.nz/template_test.html
  
  This is the error I get:
  
  'Not found '.
  
  The requested URL template_test_draft.html was not found on this server.
  Additionally, a 404 not found error was encountered while trying to use an ErrorDocument directive to manage demand.
  
  Apache/1.3.41 server at www.tuimotel.co.nz Port 80 "
  
  The search of this forum, I thought that it would be the problem of HTTP HEAD request, but server admins said that is already activated and works (as is the ftp size command).
  
  Help!

  Thanks a lot for your help (and patience). Administration server has the necessary changes and everything works fine now.

  Thank you

• "Run program in comments" VCO Workflow survey error "File &lt; file name &gt; is not found" not specified in VCO connected to VCD 5.1

  I'm trying to run a vbs script on a windows computer using "Run the program in comments" VCO Flow. I use the path of the entry only program and placed the script under the c drive to facilitate testing and you try to run a script of vmware for testing as follows. I get a VCO Flow error file < file name > not specified was not found. What is the problem with the entries.

  Flowname: Library/vCenter/comments-operations/process/run program in the comments

  Inputs                        :

  programPath c:\cscript.exe vm - support.vbs

  arguments

  workingDirectory

  undefined environment

  InteractiveSession No.

  Output: file < unspecified file name > not found.

  Thank you

  MuruRam

  Hello!

  In your example, the command would be only c:\cscript.exe and support.vbs - vm is an argument to this command.

  See you soon,.

  Joerg

• Error; The file name is not valid, _ there is no files more

  Please... Help me!!!
  When I finished my work with any program the problem is that I can't save it.

  The error just appeared "filename is not valid" OR "There are no more file"
  I had no idea of how I should fix this.

  As soon as I uninstalled ASUS Data Security Manager everything returned to normal. Could there be some compatibility issues between the security and Windows 7 software?

• File names do not appear in the preview of the synchronization in the DW8

  When I synchronize files between local or remote, the file names do not appear on the preview screen. He used to work, but now it doesn't. I see the icons Get, Put, ignore or Resolve on the left, but there is no name file next to them. Help! I upgraded to 8.02 to solve the problem of the server not saved FTP info and it worked. I was still able to show the names of files on the preview screen after I upgraded until a few weeks ago, when it just stopped working.

  I feel like a really fake on this one. I swear I don't remember doing, but I managed to hide the column leader. Three columns (Action, case, State) had always appeared, and one day, single Action and the State appeared. I got to thinking that the columns were like columns Excel and I could drag the columns to be small or large, and even hide columns by dragging the line completely right to the left of demarcation so maybe that I could do with the columns in the window of synchronization. Well, that's what I did. As I said, I have no memory to always hide the column leader because I didn't know yet that I could until after that I couldn't find it. I'm sorry that I didn't post my solution as soon as possible. I hope it works for you, too.

• The browser Safari windows:-export Japanese character of file name are not displayed

  I am facing a problem on windows 7 safari browser.

  When I export the pdf file, the Japanese characters in the file name are not displayed.

  Hello

  Apple did not support Safari for Windows for years is not surprising that you have problems.

  Use Chrome or Firefox.

• DW CS5 file names are not in the window files?

  Hi everyone, it's absolutely makes me the wall now, but when I go to download files, it does not display the file on my remote server name in Dreamweaver CS5 (files window) in some cases! The only way I can locate a file is first find the date/time last modified, make a note of it and find it. It's very embarrassing. Why DW does not display the name of the file in some cases. Thanks much for any help.

  PS. This occurs when the files are in a folder, in a folder, in a folder, it is the third file in the folder of the site.

  When records are deeply nested, the column displays the file name is not wide enough. You must make the column wide by dragging the separator in the title at the top of the files Panel bar.

  

• After effects CS6 - MP4 files

  I have problems with all the .mp4 I'am working with files. First of all, during their use in the composition, failed to get an audio clip. But what's most frustrating is that when I closed the AE and reopen the project, I work on, it just says: "after effects WARNING: 4 files are missing, because you saved last project." Of course, all of these 4 files are .mp4 and I have not moved or renamed one of them. All other media files (.mp3, .avi, .jpg) remain intact. I even tried right click on-> replace Footage-> file... and when I chose that same source file I have another error message saying:

  

  I tried on:

  -replace sequences

  -moving files .mp4 source at various locations, including C:\Videos\

  -import files of same from the same location (this has worked but only until I opened that AE)

  I don't have a lot of experience in AE, been used for a few months, so my apologies if this is usual error.

  Configuration:

  Windows 7 Ultimate(x64)

  AMD Phenom IIx6; 8 GB of DDR3 memory

  After Effects 11.0.0.378

  Clear the Cache of media of the prefs also update your AE in the last 11.0.2. Version.

  Mylenium

• Unable to sync files because the file name?

  HI, I keep getting the message:

  "Unable to sync 'file name' because the file name is not valid. the characters |, ',?, <>, /,-, *, and: cannot be used in file names. "

  But I don't have any of these characters in the files that I am trying to sync.

  Help?

  Hi Mwolda333,

  Please see the links below for help:

  Error: "unable to sync files" in the cloud of Adobe Creative

  Unable to synchronize because the server error

  Hope this helps!

• I can not import PSD file to After effect in the form of composition.

  I can not import PSD file to After effect in the form of composition.

  When I try to import the PSD file according to the effect CC (2015) as a composition, AE will stop responding and then I have to close and restart the application.

  After effect CS6 works very well, but AE CC does not not and will close while I try to import the PSD file as a composition.

  can anyone help?

  Hi good morning all.

  I finally found what causes this problem.

  That I've added the link of 3ds max compositor (CEAP) to my folder plugin effects Jefferson, sequelae stops responding to PSD (import in the form of layers as a model) files.

  then, after the removal of this file (CEAP) every thing change to normal mode.

  now the question is only how to use 3ds max scene after effects without this headache.

  Thanks for everyone.

• My name is dagur I downloaded the Adobe after effects cc trial and I do not know how it the license?

  My name is dagur I downloaded the Adobe after effects cc trial and I do not know how it the license? and I live in Iceland is even possible to get it here?

  Adobe contact information - http://helpx.adobe.com/contact.html

• Error on startup: "application (the file name is) is not a valid windows image, check against your installation diskette."

  computer startup happens on the screen with "application (the file name is) is not a valid windows image, check against your installation diskette." It can be any name of a file that appears, if I click ok it will.  Anyone know what I should do now. Thank you

  Hi LorraineMatthews,

  ·         Did you do changes on the computer before the show?

  ·         What is the exact error message?

  ·         Are you able to boot to the desktop?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• CFHeader to set the content-disposition file name does not

  Hello

  
  

  We have the code that creates a workbook with the POI library and then using CFHeader to set name of file with content-disposition, as shown in the code below. After making the content available, we write the Excel workbook in the browser. The code is below.

  
  

  This works perfectly in CF 9 but when we went to SEE 11 we found it doesn't work anymore. The same code works fine in CF 9 but not in CF 11. The file name is ignored and the file is now given the name of the cfm script is called with the correct xls extension.

  
  

  Any suggestions as to what is the cause for CF not CF 9 11 would be appreciated.

  
  

  Code:
  

  < name cfheader = "Content-Disposition" value = "seizure; filename = "#arguments. "FileName #" ">"

  < cfscript >

  Write the workbook in the ByteArrayOutputStream to get the ContentLength

  local.workBook.write (local.outStream);

  local. Len = arrayLen (local.outStream.toByteArray ());

  local.outStream.flush ();

  local.outStream.close ();

  Working now on the display of the browser output stream

  local. Context = getPageContext();

  local.context.setFlushOutput (false);

  Calling the getResponse twice (2nd getResponse) method gets the binary response of the character response (1st getResponse)

  local. Response = local.context.getResponse (m:System.NET.FtpWebRequest.GetResponse ());

  retrieve the output stream from the response to the browser.

  local.out = local.response.getOutputStream ();

  local. Response.Reset ();

  Set the content type and the contentLength

  If the two are not provided, then the data will be displayed not correctly

  local.response.setContentType("application/vnd.ms-excel");

  local.response.setContentLength (local.len);

  write the workbook in the binary output of http response stream

  local.workBook.write (local.out);

  clean things up and close the output stream

  local.out.Flush ();

  local.response.flushBuffer ();

  local.out.Close ();

  < / cfscript >

  Kind regards

  Leslie

  I found the problem. He is not related to the use of the POI library to all. Also we are migrating to CF 11 currently and just try to get things migrated as is. After our migration, we will look at CFSpreadsheet to see if it can meet the demand of our users formatting now.

  It seems that the call to local.response.reset () in CF 11 now clears the response properties, including the elements of headers. CF 9, he should not have deleted them as background. By setting the Content-Disposition response header after this point, the value was available for the browser to use.

  If the default file for a generated file name must be the name of the script creating the name of the file followed by the file appropriate for the file extension.

  The updated code is below, note the lines of code in bold.

  Write the workbook in the ByteArrayOutputStream to get the ContentLength

  local.workBook.write (local.outStream);

  local. Len = arrayLen (local.outStream.toByteArray ());

  local.outStream.flush ();

  local.outStream.close ();

  Working now on the display of the browser output stream

  local. Context = getPageContext();

  local.context.setFlushOutput (false);

  Calling the getResponse twice (2nd getResponse) method gets the binary response of the character response (1st getResponse)

  local. Response = local.context.getResponse (m:System.NET.FtpWebRequest.GetResponse ());

  retrieve the output stream from the response to the browser.

  local.out = local.response.getOutputStream ();

    local. Response.Reset ();

  Send the browser the good content-disposition header

  local.resp = local.context.getResponse ();

  local.resp.setHeader (("string", "Content-Disposition") javacast, javacast ("string", "001438.EPS nt;filename=#arguments.fileName#")); "))

  Set the content type and the contentLength

  If the two are not provided, then the data will be displayed not correctly

  local.response.setContentType("application/vnd.ms-excel");

  local.response.setContentLength (local.len);

  write the workbook in the binary output of http response stream

  local.workBook.write (local.out);

  clean things up and close the output stream

  local.out.Flush ();

  local.response.flushBuffer ();

  local.out.Close ();