After El Capitan mail upgrade works not

Similar Questions

• Portege R500 - after what ODD hardware upgrade will not read

  Recently, I bought a vintage 2008 Toshiba R500-11Z laptop ultraportable. He needed a new keyboard, because most of the keys are dead, so I bought a new replacement (exact same keyboard, an eBay seller). I also decided to give a new breath of life by installing a SSD drive. The old keyboard was attached to the frame with some sort of sticky back plastic, which is not reusable, so for the new keyboard, I used a strong adhesive tape double-sided. Before you screw the plastic rear landing gear I installed Windows 7, with the loosely adapted landing gear up. Installation of Windows is complete and everything seemed fine. After screwing in the landing gear, I discovered that optics player his original "open-top" mat * a DVD-RAM UJ - 844-S would not read disks. He just made a noise 3 times but does not spin then upward as it normally would. Drive is visible in Explorer solutions and Device Manager.

  After unscrewing the undercarriage, the relocation of the optical drive and rescrewing several times, I was not able to get the optical drive to play all discs. What I created is that the disc must be catching on the ceiling, thus signalling the reader to turns don't not upward; leaving the screws each side of the lander was allowed to create a gap, so there is more room between the optical drive and the ceiling of the laptop. Disks will then turn upward and Windows AutoPlay will open to them. What I can't work, it's what has changed in regard to the way in which the drive is mounted and its position relative to the ceiling above him. Or if the reader is now trying to turn a corner. There are two blocking screws that hold the drive in place, so that the reader must be at the same place its always been.

  I was wondering if anyone has come across this problem before, and if there is an easy solution. According to me, I hit a wall of bricks on this one!

  Thanks in advance.

  Just to say, after a lot of head scratching, I worked on the problem. I had made a mistake by attaching the clamp metal Assembly at the rear of the optical drive.

  I had screwed the clip outside the Orange connector when he had to be inside (between the optical drive and the orange connector). It seems that it must have pushed the player to place just enough to prevent it from functioning properly.

• Shared e-mail Folio works not

  We have several dps apps, and most of the time when we share a folio with the email application, an email notification is sent. BUT some accounts do not seem to work. All the parameters that we might be able to change?

  Thank you

  Christopher

  Simply mail the person and tell them to connect to http://digitalpublishing.acrobat.com/. Folios will be there, that you don't have to click the link in the email to accept the application for partition.

  Neil

• Response to the Mail function works not

  When I try to reply to an email in Mail, opens the window of response but the response address does not appear in the address box and the cursor flash, but I can't type the address under. By clicking on the button close the answer window will not close and I can only get rid of it by quitting mail altogether.

  Suggestions anyone?

  Rob

  Exit the Mail.

  In the Finder, select go, then navigate to the folder. Copy and paste the path below and click GO:

  ~/Library/containers/com. Apple.mail

  Move the entire folder com.apple.mail to the Recycle Bin, open Mail and test. If all goes well, you can empty the trash. You may need to re create your user settings.

• Windows Live Mail 2011 works not

  program will not stop running
  Windows live mail 2011 is running this little screen. with the Word as a little spinning circle. She did this for12 more hours now.

  He must stop. his manner. What can I do to stop it?
    

  Hi Ray,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

• Z10 Z10 blackBerry after 10.2.1 - SMS works not properly

  Hello

  love the phone... but since the update she did crazy stuff!

  First of all, I was able to text and receive text... BUT when I went in the HUB to choose only text messages, it was empty, but they were all in my HUB with all other messages.

  Now, today, I have not been able to receive texts... they are sent since I called a few people who I sent texts and they advised me that they had received them.

  Tried to reset the phone, starting it upward, the only thing I did not must provide 10.2 before the update.

  I see others have this problem, someone found a solution that actually works?

  Thank you

  TW

  If they are still not appear then I would contact your operator.

• E-mail still does not work on ZTE after upgrade

  I waited patiently the OS update, hoping that would solve my problem of e-mail. This isn't.

  Here is the configuration:

  I have an IMAP account with SSL from my hosting company. I manually entered the account information. The phone gladly accepts this information. The account is added. The Inbox shows up with correct messages. Then begins the problem:

  1. I type on a message.
  2. a new window will open and display the header information
  3. instead of the body of the message, I see that the loop of progress going on forever.

  Here's what I've done so far:

  1 soft reset
  2. hard reset.
  3. install the OS V 1.1
  4. check with my hosting company, they were very courteous and checked my email account. Nothing was wrong here and I can get my mail with my computer and iPad.

  What is going on? Am I the only one having this problem?

  Success! Thanks to expert advice from Andrew Sutherland to Bugzilla, my e-mail program works again.

  Andrew suggested that I look at my folder structure IMAP using openssl. It turned out that there was a strange trash that shouldn't have been there. Even more strange, it's Thunderbird on my Mac that created it.

  Once I deleted this file and set up Thunderbird correctly, I have reset the phone ZTE, removed, and then reinstalled the email account and things work fine now. Many thanks to the Andrew and support people who flew my bug to a solution

• screen capture on the iphone 6 does not work after 9.2.1 upgrade

  screen capture on the iphone 6 does not work after 9.2.1 upgrade

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Try to do a screenshot, once more.

• How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

  How to download windows install windows 7 32 bit service. The system (Dell 4500) let me download after xp to 7 upgrade. Involved also does not work.

  Install W7 sp1.

  Then go to the support page of Dell for your computer and download the audio drivers W7 from there and install them.

  See you soon,.
  Jerry

• After almost a year of working great, my Lightroom doesn't is more afford to import the RAW of Nikon 7200 images. I upgraded to Lightroom 6.3 and which did not help. What can I do?

  After almost a year of working great, my Lightroom doesn't is more afford to import the RAW of Nikon 7200 images. I upgraded to Lightroom 6.3 and which did not help. What can I do?

  Seems to be a problem with the destination location.

  Try changing the location of destination at the top on the right under 'FOR' pictures folder or any other location on your local hard drive.

• Flash player not working not not after upgrade to 11.2

  ENVIRONMENT:

  PC clean and kept clean by me (owner of the COMPUTER company)

  Windows XP Pro 32-bit SP3, Pentium 4 3.0, 4 GB of ram.

  Mozilla firefox 12.0, 32-bit (not marked as 64-bit, so I guess that 32-bit)

  HOSTORY:

  I have updated flash player on my PC as Flash asked me to upgrade.

  I upgraded to 11.2 (plugin version 11.2.202.235 and version activex or 10.3.185.5) about 2-4 days ago.

  I noticed after upgrading my web videos were not playing correctly (but at the same time as I had updated my a Netgear to a sonicwall router, so I thought that the problem is maybe there.

  After much online video plays do not, I went to the other PC where I have not being updated for flash 11.2 and tried the same videos and they worked. It is therefore obvious that my router is not the problem.

  Here is an example of a video which will be now. do not play on this specified PC but will play on my other PC

  http://News.Yahoo.com/video-failed-space-shuttle-launch-really-awkward-165629432--finance. HTML

  Do not play, I mean: the video will display the first image it loads. If I click on play it will look like it is buffering. But he might start to play from 1 to 3 seconds (with no sound) and then freeze for ever. If I click on pause and then play again, the progress bar downstairs will move forward in the film about 10 to 40% (apparently the jump depends on the delay between when I expect after the first second of 1 to 3 of the game, I press play and then later and pause buttons), then once again It will play a second or two without noise and even once be frozen forever.

  Adobe says here:

  http://helpx.Adobe.com/Flash-Player/KB/find-version-Flash-Player.html

  How to troubleshoot the flash. I went to the "flash player doesn't work/windows7" troubleshooting options.

  I've deleted all the flash player, data navigation, removed the cache of flash player disabled material acceleceration, and now I'm the report here.

  I guess I need restoration until adobe figures this out (Yes, I know what assume spells).

  This page told me how to uninstall and reinstall and some other options, but nowhere he told me how simply rollbacxk to the previous version, the whattever version it was, I don't know as I don't have it to follow the current version of flash when it works.

  PERSONAL NOTE: I HATE auto update crashing my stuff. This is the reason why I disable the automatic update and am more than happy to stay 2-20 versions behind until what I am forced to upgrade to do something, I want to work. But F'in adobe begins to turn aut update on every product it creates. I HATE this!

  Thanks for your time.

  JW

  Please provide as much information; I wish more users looking for help that would make!

  Unfortunately, I don't have a clear solution for the specific problem you see.  The video link you provided works great for me with Flash Player 11.2 on Firefox on Windows XP - SP3 and Windows 7 12.

  What I would try if it's the same for me:

  • Try a new installation by following the instructions in http://forums.adobe.com/thread/928315
  • to reinstall them using tall_in_a_firewall_proxy_server_environment http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#ins offline installers
  • If the above does not improve the situation, I would try if a graphics driver update changes anything; See http://forums.adobe.com/thread/945765 (but I'm sure you know how to update the drivers, with your background)
  • If everything fails, I would try a system restore to a date prior to the update of Flash Player; all PS files are in the C:\Windows\... records, so he should be back completely on the previous working version

  Or you could try a manual installation from a previous version of

  • using uninstaller http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html
  • then download and install the archived Flash Player appropriate to http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html

  PS in regards to the installers archived, you may need to disconnect from the Internet during the installation.  Some of the newer installers go and check the availability of new versions and refuse to continue if they find one.

  P.P.S. You can permanently disable auto-update using a mms.cfg file; See http://www.adobe.com/devnet/flashplayer/articles/flash_player_admin_guide.html

  Most of the information in this guide to the Director must make reference to the new silent update that are substantive, but it also works on the previous update of the FP.

• Virtual machines will not work after missing 6.5 upgrade, / dev/vmmon

  I recently updated my build-126130 VMware Desktop 6.0.5 to 6.5.1 and now none of my virtual machines are running.  When I try to start them, I get the following error:

  "Could not open/dev/vmmon: no such file or directory."

  Please make sure that the "vmmon" kernel module is loaded. »

  When I looked in the directory/dev, there is no listed vmmon device.

  From everything I've read, upgrade worked very well.  The application starts without any apparent problems.  I suspect since all my virtual machines worked really well until I restarted the laptop, there is a problem loading the kernel module.

  I'm under openSUSE 11.0.

  I liked all the ideas that everyone has.

  Kind regards

  Jim

  Hello

  It is sometimes a problem with the new GUI to create modules from the kernel, which is most likely what you're hitting right now.

  Have a look here:

  http://www.VI-Toolkit.com/wiki/index.php/Build_host_vmware_kernel_modules

  This might help a little, the notes are not yet specific SUSE. If the script Christmas help and you had to do something different on SUSE then I would appreciate it if you add a note to this topic.

  Thank you

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• MacBook can not see my WD My Passport after El Capitan installed.

  Hi all. My Macbook can't read the WD My Passport after El Capitan upgraded. It worked fine before upgrade, think a Yosemite before. Do not see it in the Finder or in the Apple system report. Any ideas? I'm sure it's all to do with NTSC etc, but why he would become unreadable? Thank you...

  The WD My Passport works on other computers?

• My firefox put updated recently. Now my pop mail server will not work. I did a "restore" to last week, and it was beautiful. He has now automatically updated. No mail server.

  I read through several answers to other people who have problems after an update. I'm not computer savvy enough to understand half of the recommended "solutions". I need the clear and final instructions about what to do. (Statement for "Dummies", is what I need.) I can't "restore" my computer continuously, that to have auto updates cause the mail server pop to stop working each time. If there is anything that I can do, I guess I'll have to stop using Mozilla Firefox. Can you help me?

  There is no solution for Firefox and Firefox pop does not have email and didn't need a POP mail server

  If you use Firefox to view and 'send', you will access a webmail provider.

  http://en.Wikipedia.org/wiki/Post_Office_Protocol

• After El Capitan on new Macbook Pro Mail problems

  Mail doesn't work properly anymore now that I use a new mid-2015 MB Pro with El Capitan.  Non-Pourriel, including remittances from my own account to myself, is marked junk and put in the Junk folder. Mail that is not marked as spam is also put in the Junk folder. I can't find the rhyme or reason for the choice of the filter. I always install the latest updates on all of my devices. Can someone tell me how to solve this problem? Thanks in advance.

  There are two ways to designate as junk mail. One is based on the local 'training' that you used in the Mail application. These emails are marked in Brown, the other method is by e-mail based service provider on whatever rules or databases they use. These emails end up in the Junk folder, but are not marked in Brown.

  The only way to deal with the second type is to open a session in the portal provider email, change your preferences or update the address book provider.