Response to the Mail function works not

Similar Questions

• HTTP: Error 58 (the network function is not supported by the system)

  Hi all

  I have a problem with HTTP Client in LV 2011 functions.

  As you can see in the screenshot attached, I try just:

  -Open a handle-> no errors

  -Send a web request using the GET method-> error 58

  -close the handle

  The problem is that a 58 error: "the network function is not supported by the system. However, it works fine when I type the same URL in a web browser.

  You have any idea of what could be the problem? Thank you in advance for your help!

  J.

  I have fixed the bug: there was a white at the beginning of the URL... (!!!). I deleted the empty character and now it's OK.

• Is the fopen() function works in labview?

  Hi gentlemen...

  I used the fopen() function in labview, it does not work. Is that I can use the fopen() function works in labview?

  Please help me as I'm new to labview.

  Thanks in advance

  Can you give us a description of how you try to do this?

  You realize that LabVIEW is not based on text, no?

  Looking just for another equivalent method? http://zone.NI.com/reference/en-XX/help/371361J-01/lvprop/vi_open_front_panel/

• The speech of the text function works in Microsoft 2010 so if how?

  The speech of the text function works in Microsoft 2010 so if how?

  Hello

  1. are you referring to Microsoft Office 2010?

  2. are you referring to the speech recognition program?

  I suggest you to see link below and check if it helps.

  Windows speech recognition

  http://www.Microsoft.com/enable/products/windowsvista/speech.aspx

  Guide step by step Windows Vista speech recognition

  http://msdn.Microsoft.com/en-us/library/bb530325.aspx

  See also the advice given by M Thahaseema from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-7-speech-recognition-is-not-working/49e1d4c9-4322-41BD-9a6c-026ab0587286

  Let us know if it helps.

• DELL C2665dnf - the touch screen works not.

  DELL C2665dnf - the touch screen works not.

  How can I get a quote for the replacement of the touch screen?

  Am in need for a screen. Can help me

  Hi Rickellv2,

  You must call Dell technical support or use the chat for your country for information.

• Tap to hear the time function does not work

  I can't tap to hear when mickey or Minnie faces to work

  I have the latest versions of software on the phone and watch I toggled the function works and have re-matched my watch to my phone, but it still does not.

  Hello

  I suggest to wait until a few hours, leaving the face of Mickey or Minnie Mouse selected on your watch.

  My own experience (tested on two watches) is that the feature became available after waiting, without rebooting or unpairing / rematching of the watch. In one case, it took somewhere between 3 and 5 hours, but you can see he started working earlier than that.

  It can help to first turn the tap to set the time to stop, pause for a few moments and then turn it back on again.

• quick response of iOS for whatsapp works not when the alphanumeric password has been on iPhones

  Hello

  My question was, I was getting keyboard white with no key, just by doing a quick response to whatsapp messages, while the phone is locked and if the phone has been unlocked, it works fine.

  After a quick search, I found that in this case, on all iPhones (I was able to replicate on iPhone6s, 6 and 4S), regardless of the versions of iOS (as long as it takes in charge the quick response), while the phone has been set with digital access code Alpha and locked. If it's a digital password, quick response normally works with the good visible keyboard. From now on, I found that this happens only with Whatsapp Application. Can someone tell me what is an iOS problem or something which Whatsapp team need to check?

  (Also please check on your other app, instant messaging, if get you this error during the series with an alphanumeric password).

  Thank you

  Doudou.

  With the help of iPhone6S

  OS version: 9.3.4

  Since I have never heard of this issue with any other application and WhatsApp is not an Apple application, I suggest you address the problem with WhatsApp and see what they have to say.

• Search function does not work correctly (it does not mark the words found, instead, he built a light blue frame); When you open the PDF with Foxit, the search function works.

  Hello

  I use a PC (not a MAC). The document that I have a problem with emerged on a Word Document. I opened it using Adobe Acrobat Reader DC.

  When I tried to search for a Word, it worked. He scored the first word matching my search. As I pressed Enter to get results, he built a clear blue frame around large parts of the text presenting the result somewhere in the framework:

  

  When more pressing enter, the frame moves to the right or expands, but no other match is found. I tried to open the same file with Foxit pdf and here the function works correctly (marking all the matches one by one).

  Unfortunately, I can't tell all my customers to use Foxit. They all use Adobe and are complained about the search function.

  The size of the document is 9,32 MB and contains 324 pages.

  Thanks in advance for your help.

  Yours,

  Ula

  Hi Sarah,.

  We've fixed the problem. Where a person has the same question:

  When you create a pdf file in Word (by "save under" and select 'PDF (*.pdf)' as the type of document)), you can click on the 'Options' button... "When you want to have a tree structure of your pdf file.

  In the 'Options' dialog box, select "Create bookmarks to help: ' (I so always use 'Headings') and UNCHECK"Document structure for accessibility tags '.

  

  Then you will have problems with the whitin your structured pdf search function.

  It's a problem with Word.

  Thanks for your time!

  Kind regards

  Ula

• simple JavaScript with the .onClick function does not. I have the following little script and does not know why it does not work through. any ideas?

  #target illustrator

  main #targetengine

  Function

  function count_selected_objects() {}

  Alert ('start of the function'); works well!

  myDocument var = app.activeDocument;

  var items = selection.

  var totalSelected = items.length;

  for (var i = 0; i < totalSelected; i ++) {}

  var my_elementy = app.activeDocument.selection [i];

  Alert ("no" + i);

  }

  }

  Palette window

  var win = new window ("palette", 'Éléments Count');

  win.alignChildren = "fill".

  Win.My_Button = win.add ("button", undefined, "Run");

  Win.My_Button.onclick = function() {}

  count_selected_objects();

  }

  Win.Show ();

  You can reference below:

  Calling functions from the palette of the user interface

  Ten

• Why the selective function does not work.

  I used Adobe 2, 4 and 5 years.  I frequently ask selective highlights or sharpness in an image using the layer to double orders, highlights, adjusting the image, layer mask, hide all.  When I try to apply selective effects using brush nothing happens.  ???  How can I solve this problem?  I appreciate your help.

  Ted

  Ted,

  There are a few things that could cause that. The most obvious is that you use not perhaps not the right color (transparent, visible/black-white) or maybe the opacity of the brush has been set to a low value. If not, the next thing I would do is to check and make sure that you have the thumbnail of the layer selected and not mask the image layer in the layers panel. If this does not work, could you upload a screenshot?

  Jason

• In El Capitan of the iPhone the mail server does not

  I did a clean install of El Capitan 10.11.2, then 5.0.15 server on my LAN. Then I started the mail server to server to use as my IMAP mail server.

  It works very well fran all my Mac (Apple Mail or Thunderbird) and PC (Thunderbird).

  But when I try to read my email fran an iPhone or Android, it does not work. My iPhone complains that 'the Logins are disabled for "xxx" where "xxx" is one of the users I've created server. The mail.log file does not all the new entries in the attempt. One thing that bothers me, is that the line State in the form of e-mail in the server says 'Available on your local network to Server.local' rather 'Available at montan.biz' it was in my previous installation that has worked.

  What can be wrong?

  One thing that bothers me, is that the line State in the form of e-mail in the server says 'Available on your local network to Server.local' rather 'Available at montan.biz' it was in my previous installation that has worked.

  Not of any relevance/fear is what Server.app 5.x reports. It is simply unnecessary and somewhat misleading way that the Apple Bonjour local network (.local) e-mail service is available at server.local. But everywhere else Apple advises not to use the .local domain (which is not really an appropriate domain) for services like mail, but to use an own domain name (ideally Internet legal).

  What can be wrong?

  Well, that's an open question, to which the answer might be, potentially, "everything." Don't worry... only joking (half).

  As you have already given to your domain name, I will refer to it. From my Mac, I see:

  $ dig @dns1.name - services.com montan.biz mx

  ;; QUESTION SECTION:

  ; Montan.biz. IN MX

  ;; SECTION OF THE ANSWER:

  Montan.biz. 3600 IN MX 10 montan.biz.

  ;; ADDITIONAL SECTION:

  Montan.biz. 92 IN a 84.219.155.117

  DNS1. Name - Services.com is the SOA for your domain on the Internet.

  If you open a Terminal fast a Mac inside your network, ideally not your serverand type the following commands (one per line in the Terminal) what you get in response.

  $ dig montan.biz soa

  $ dig montan.biz ns

  $ dig mx montan.biz

• After El Capitan mail upgrade works not

  Last week I weakened and improved el Capitan. What a mistake! The operating system works very well, but the new Apple Mail app is crazy. Whenever I try to send an email, the small window that opens when you dial began to disappear and reappear - flashing "over and out" - as soon as I pressed 'Send'. He never stops. The letter does not and continues to disappear and reappear forever. I don't use icloud.

  I'm at my wit's end. What is WITH Apple Inc.? ! Impossible that they deliver a simple mail program that works every time without these terrible problems. Google does!

  I looked up solutions on Google to find these obscure and complicated solutions 'back room' I don't understand any their.

  Is there a simple solution that does not require a computer degree to understand?

  T /.

  Tdeecy,

  Follow the steps listed in: If you can not send an email in the Mail, because the window application again message disappears and reappears - Apple Support

  

• SetCtrlVal used during the Thread function works causes memory leaks

  I am writing a program that works if... Or not work if... - see the next lines... :-)...

  The program includes a section, mostly GUI - and User Interaction.

  The other part is a DLL. In the DLL we readings on an external consultant controller RS232. Sometimes the controller card needs (called how much) time and this time must pass then the result can be read card controller... and so on...

  Blocking is not GUI-user-program for the expectation of the return value of the DLL functions (which need a few seconds to be finished) I start a thread in the DLL with

  CmtScheduleThreadPoolFunction (DEFAULT_THREAD_POOL_HANDLE, THREAD_FunctionX, & tmpTFP, NULL);

  with "tmpTFP" as an instance of type "TYPE_THREAD_FUNCTION_PARAMETERS":

  typedef struct
  {
  //
  int IntVal1;                // 1. Integer-Wert
  int IntVal2;                // 2. Integer-Wert
  int IntVal3;                // 3. Integer-Wert
  int IntVal4;                // 4. Integer-Wert
  int IntVal5;                // 5. Integer-Wert
  //
  int IntBuffer1 [32];            // 1. Integer-buffer (aktuell genugt einer)
  //
  Double DblVal1;                // 1. Double-value
  Double DblVal2;                // 2. Double-value
  Double DblVal3;                // 3. Double-value
  Double DblVal4;                // 4. Double-value
  Double DblVal5;                // 5. Double-value
  //
  char CharVal1;                // 1. (Single)- Tank-Wert
  char CharVal2;                // 2. (Single)- Tank-Wert
  char CharVal3;                // 3. (Single)- Tank-Wert
  char CharVal4;                // 4. (Single)- Tank-Wert
  char CharVal5;                // 5. (Single)- Tank-Wert
  //
  char CharBuffer1 [1024];        // 1. Char buffer (akutell einer genugt)
  //
  } TYPE_THREAD_FUNCTION_PARAMETERS;

  In the GUI-user program - I get fast by default-return value of the thread start function.

  Then I asked the DLL (some global state variables are used for this) when it is finished.

  According to the map-controller (RS232) contacted the waiting time depends on the 'mood' of the controller card.

  In the DLL-mark of the GUI-user-program routine now everything works fine - without using "SetCtrlVal!"

  In my GUI, there is a text box of the info/comment for messages. If I do a few outputs user using 'SetCtrlVal' I always errors, caused by the false "TYPE_THREAD_FUNCTION_PARAMETERS"-values in the service of thread. "» If I set a breakpoint at the beginning thread-function I see mostly erroneous values in my transfer structure variables. If I put a breakpoint in the thread-function-calling 'CmtScheduleThreadPoolFunction (...)"and at the beginning of the thread values are (mostly) correct!

  I tried several and different things - but:

  If I ONLY (!)  Commenting on the (!) of a line with "SetCtrlVal", the program works, all States are asked out of the DLL.

  If I replace the "SetCtrlVal" with a written record-file function clean everything works fine and after completing the program I can look at the log file and see all the user information. BUT with 'SetCtrlVal' instead or set or (...) it does not work.

  My description is maybe not entirely clear, but believe me: only ONE line the «SetCtrlVal "line - should be commented out to let the program run properly!»

  Because if the line "SetCtrlVal"is program-user-GUI, after the call to the thread in the DLL, the DLL-memory seems to be corrupted by the call "SetCtrlVal" in the user-GUI program.»

  Best regards

  F.

  There may be a problem in your structure that your variable is set.

  You said that, after the address of the variable in the thread function the appellant one ends. Now, as you can read help each value passed in parameter threadFunctionData of the layed function must point to an area of memory that persist when the fuction is running: If your variable is defined at the level of the functions it is not valid when the thread runs since the appellant finished and released its local memory.

  Your approach with a global variable is a valid alternative, but if it is the solution, you will find data passed to the thread function must be valid for all his life.

• Call the library function does not find the DLL in the directory where are my LLBs

  I'm using LabVIEW 8.6.  I have a set of screws in several LLBs.  All LLBs located in a directory.  Most of my screws is wrappers for the functions in a DLL.  I was told to put my DLL in the directory where are the LLBs, and apparently this is how the previous programmer has worked (using an earlier version of LabView).

  In the configuration of the library call, I've specified .dll without path.  (This is how we want our screws are an API that will integrate other programmers, so I don't know where they put things and I can't use absolute paths).

  When I insert the VIs in LabVIEW, LabVIEW can not find the DLL and wonder of spotted.  It's just that here in the directory with the LLBs and when I double click on it, everything works fine.  However my absolute path to the DLL now appears in the library to call configuration, and we don't want that.

  Does anyone know how to make this work?  I guess the location of the screw (or LLBs, in this case) should be the current directory and thus Windows search there for the DLL.  However, it seems that this is not the case (in the least, in the latest version of LabVIEW).

  Thank you.

  Batya

  Well someone using your library should not have to dig into your screws and do it all on his own. Instead your library must wrap that and hide disorders it altogether.

  The cluster of error has been added when the dynamic path option has been added. It is not useful hide this error output, so it's always there. As well as the dynamic path, there was the improved error handling added the CLN. One of them is that the level of verification when calling function errors (exception handling) can be specified. I guess that some of these options may generate an error code instead of bring up a dialog box, as they did before and that the output of error code can be useful even in the case of static calls.

  As to what you want to do, I would have long managed that with a DLL that has essentially the same functions as your other wrapper DLLs and an initiliasation function that returns a pointer to a structure of functional distribution based on the actual DLL you want to call. Quite like what an object-oriented function dispatch table is. Then, when your interface initilising you call initialize function and specify the device interface/type that you want to use and after that all other functions take a pointer extra function parameter expedition as the first parameter, in addition to the parameters of the real function. This dispatch function pointer would be just a pointer to a structure that contains the table of function for this interface pointers and the sake of LabVIEW would simply be an integer of size pointer.

  The wrapper function then checks the pointer structure validity send feature and call the actual function with the remaining parameters. It is a C programming and may require a planning and desigining the different interfaces to facilitate this kind of technique of the expedition, but it will certainly pay to long-term and make your library even can be used in previous versions of LabVIEW, so that VB etc. without delicate dynamic loading in the level high, programming environment.

  Rolf Kalbermatter

• The Inbox in the mail application does not all the messages that I can see through the Web browser

  I have a similar problem with the Mail application on Surface 2. Inbox does not all the messages that I can see through the Web browser. I chose E-mail download of any time in the account settings. But when it sync randomly takes messages in the Inbox to display. I uninstalled the app, restarted the Surface and again installed in the Windows store. But the problem remains. It's frustrating. I think the app is not fully developed.

  His works now. I did the sync and other things with no results. Then I noticed that my missing messages are somehow appearing in the file of the Newsletter. Then, I moved all the messages in the Newsletter folder in Inbox and unchecked it parameters. It's working now. There are apparently some bugs in the software that allows for the Newsletter to divert messages. In any case thanks for checking.